Tender For Construction Of Two Class Rooms In Panchayat Union Middle School At Karuppanpulam Panchayat In Vedaranyam Block
Tender Value
26 Lakhs
Estimated cost
Bid Submission
05 Jan 2023
0 days left
EMD
26000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Nagapattinam → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Two Class Rooms In Panchayat Union Middle School At Karuppanpulam Panchayat In Vedaranyam Block
BOQ
| Sl. No. | Item Description |
| 1 | 1.Construction of Two class room school Building at |
| 2 | Earth work excavation for foundation in all soils such as red earth ,hard stiff clay soil, stiff black cotton soil, hard redearth,shales, murrams, gravel,hard rock not requiring blasting ete complete., |
| 3 | Gravel filling for foundation and basement in all soils such as red earth ,hard stiff clay soil, stiff black cotton soil, hard redearth,shales, murrams, gravel,hard rock not requiring blasting ete complete., |
| 4 | Cement concrete 1:4:8 mix usin 40 mm HBGS metal inculding cost and coveyance of all materials to site including labour for mixing ,laying,curing etc complete., |
| 5 | Filling with Carted Earth including alllabour charges for filling including watering ramming, consolidation and other incidental charges etc., complete |
| 6 | Brick work with cement mortar 1:5 mix usingcountry bricks of size 83/4\"x41/4\"x2\" forfoundation and basement and superstructureinculding cost and conveyance of all materialescuring etc ,complete.upto basement |
| 7 | Brick work with cement mortar 1:5 mix usingcountry bricks of size 83/4\"x41/4\"x2\" forfoundation and basement and superstructureinculding cost and conveyance of all materiales for above basement |
| 8 | R.Cement concrete 1:11/2:3 mix using 20 mmHBGS metal inculding cost and coveyance of all materials to site including labour for mixing ,laying,curing etc complete., for upto basement |
| 9 | R.Cement concrete 1:11/2:3 mix using 20 mmHBGS metal inculding cost and coveyance of all materials to site including labour for mixing ,laying,curing etc complete., above basement |
| 10 | Supplying and fabrication of steel,placing in position ofmild steel or ribbed Tor steel grils for RCC worksinculding cost of steel and binding wire etc. |
| 11 | Supplying and erection centering for sides andsoffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beamcoloum,sunshade etc complete.,a) Side shuttering |
| 12 | Supplying and erection centering for sides andsoffits inculding necessary supports and structing for plain surfaces such as RCC Slab,Lintel,Beamcoloum,sunshade etc complete., for bottom centering |
| 13 | Weathering course with broken brick jeely for20 mm size mixed with pure slacked lime(no sand to be used) in proposation of 32:12.5 cftto proper gradient,well beation with wooden beaters etc |
| 14 | Terrace flooring with one coarce of machinepressed tiles of size 20x20x2 mmusing Cm 1:3with water proofing compound 2% weight ofcement used and the joints pointed with same |
| 15 | Granaolithic floor finish of 25 mm thick in PCC 1:2:4 using 10-12 mmHBGS Jelly inculding curing etc |
| 16 | Kota stone flooring laid in C M 1:3 inculding material and labour charges etc |
| 17 | Plastering with Cement Morter 1:5 mix 12 mmthick inculding cost and conveyanceof allmaterials to site and labour charges for curing etc |
| 18 | Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat M.Sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place.Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete. |
| 19 | Steel window Three leaves (1.50 x 1.30m) : (Steel Windows with Double Leaves) Shutters.Manufacturing, supplying and fixing in position of steel windows with the following specifications. Outer frames of windows made of \"Z\" section F7D of size 33 x 25 x 3mm at 1.419kg/m and mullion \"J\" section (F4B) of size 46 x 25 x 3mm at 2.28kg/m and shutter section of made of F7D of 33 x 25 x 3mm at 1.419kg/m as specified in IS 7452/1990. ach openable shutter should not exceed a width of 600mm to enable separate operations and easy maintanenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18 x 5mm MS flat at 0,70kg/m at 3Nos. for each shutter and additional diagonal stiffeners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR sheets in position firmly. |
| 20 | Distembering two coats oil bound distemberover priming coatinculding cost and conveyance of all materials to site and all loboure charges etccomplete ( Innerwall ) |
| 21 | Distembering two coats inculding cost and conveyance of all materials to site and all loboure charges etccomplete for ceiling |
| 22 | Exterior emulusion paintstwo coatsover priming coatinculding cost and conveyance of all materials to site and all loboure charges etccomplete ( outer wall ) |
| 23 | Painting two coat of new iron works such as steelDoors,windows,ventilators, etc., with best approved first quality of synthetic enamel paint of approvedcolour over the existing priming coats,ete. For new iron work |
| 24 | Painting two coat of black board., with best approved first quality of synthetic enamel paint of approvedcolour over the existing priming coats,ete. For new iron work |
| 25 | Labour charges for fixing of Steel Door including all labour charges etc. complete. |
| 26 | Labour charges for fixing of Steel Window including all labour charges etc. complete. |
| 27 | Provision for Cupboard Cuddapah slab40 mm tkinclding supply and fixing etc |
| 28 | Providing and fixing of PVC rain water down fall pipe 110mm dia with necessary T WClamps, Plug, Shoes, bend, Screws, nails etc., complete |
| 29 | Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wallwith3 mm thick Hylum sheet cover withTW boxAnd 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good ofthe concealed portion with suitable colour for PVC concealed Light point / fan point (For electronic Regulator) SD 24 |
| 30 | Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutorof 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wallwith150 mm X 100 mm X 113 mm TW switch boxwith3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plugwith continuous earth wire connection of 14 SWG TC wire for making good ofthe concealed portion with suitable colour forconcealed PVCplugpointSD 36 |
| 31 | Wiring with 2 X 4 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutorof 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wallwith150 mm X 100 mm X 113 mm TW switch boxwith3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plugwith continuous earth wire connection of 14 SWG TC wire for making good ofthe concealed portion with suitable colour forconcealed PVCplugpointSD 40 |
| 32 | Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of1100 V grade on 7/20GI bearer wire for service connection mains SD 62 Service wire |
| 33 | Supply and run of 2 X 1.5 sq.mm(22 / 0.30) PVC insulated SC unsheathed copper Conductor of1100 V grade in 25 mm dia GI pipe( Class \" B \" ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 67 |
| 34 | Supply and fixing ofCFL Blub with guard ( Philips / Bajaj / Crompton / K Lite ) suitable for incandescent lamp with 60 W bulb.SD 80 |
| 35 | Supply and fixing of 16 Amps DPIC Switch of 500 V with fuse and neutral (Side Handle) on suitable TW box PWD EarthingSD 142 |
| 36 | Provision for Meterboard SD 125 |
| 37 | Supply and fixing of single box type 4\"-40Wflourescent tube fitting with copper choke and condenser with TWround block on wall or ceiling with flourescent tube with PVC unsheathedcopper leads from terminals to the fitting ofTube Light [SD88] |
| 38 | Supply and fixing of 1200 mm ( 48\") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mmdown rod on the existing clamp. SD 106 |
| 39 | GST Amount for providing Service to Government Contract Works for the above Construction Works. { GST Amount is the Total GST Amount for total overall quoted amount above this row in column \"BB\" for all works in this package} 12% for other than Earth Quantity |
AI Tender Summary
Tender Timeline
Dec 26, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJan 05, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 05, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender