Tender For Construction Of New Boys And Girls Toilet At Sitai High School Within Sitai-1 G.P. Under Sitai Panchayat Samity
Tender Value
5 Lakhs
Estimated cost
Bid Submission
31 Dec 2022
0 days left
EMD
10000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sitai → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of New Boys And Girls Toilet At Sitai High School Within Sitai-1 G.P. Under Sitai Panchayat Samity
BOQ
| Sl. No. | Item Description |
| 1 | Earth work in excavation of foundation trenches or drain in all sorts of soils (including mixed soil but excluding laterite or sand stone) including removing spreading ro stacking the spoils within a lead of 75 m, as directed including trimming the side of trenches, levelling dressing an raming the bottom, bailing out water etc. as required complete. |
| 2 | Earth Work in filling of foundation trenches of plinth with good earth in layers not exceeding 15cmm including watering ramming etc.layer by layer complete ( payment to be made on the basis of measurement of finished quantity work) (a)With earth obtained from excavation of foundation |
| 3 | C) (ii) With carried earth arranged by the contractor within a radius of of 3 km. including cost of carried earth. |
| 4 | Single brick flat soling of picked jhama brick including ramming and dressing bed to proper leveling and filling joints with local sand |
| 5 | Cement concrete with 30 mm down graded shigles excluding shuttering. |
| 6 | Ordinary Cement concrete (M-20) with graded stone chips(20 mm nominal size) excluding shuttering.and reinforcement. In ground floor as per relevant IS codes. |
| 7 | Reinforcement for reinforced concrete work in all sorts of structure including distribution bars, stirrups, binders etc. initial straightening and removal of loose rust (if necessary) cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16G black annealed wire at every intersction, complete as per drawing and direction |
| 8 | Hire and labour charge for shuttering with centering and necessary staging upto 4m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slab, beams and columns, lintels curved or straight including fitting, fixing and striking out after completion of works (upto the roof of ground floor) |
| 9 | Above PL |
| 10 | Brick work with 1st class bricks in cement morter (1:6) |
| 11 | 25 mm th damp prrof course with cement concrete with stone chips (1:1.5:3) (with graded stone aggregate 10 mm nominal size) and admixture of water proofing compound as per manufactures specification followed by two coat of polymer based paint, ( 1st coat after 4 to 5 days of concrete laying and 2nd coat just before brick masonry work) as directed ( cost of water proofing compound & polymer based paint to be paid seperately) ( Chequering not required over concrete or painted surface) |
| 12 | 125 thick brick work with 1st class bricks in cement morter (1:4) in ground floor |
| 13 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors in wall |
| 14 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors in floor |
| 15 | Supplying 1.5mm thick M.S. sheet fitted and fixed on one or bothfaces of M.S./ W.I. gate etc. |
| 16 | Plaster (to wall, floor, ceiling etc) with sand - cement-morter including rounding off and chamfering corners as directed and racking outjoints including throating, noising and drip course, scaffolding / staging where necessary ( Ground floor) (excluding cost of chipping over concrete surface ) 15 mm th 1:6 |
| 17 | 20 mm th 1:6 |
| 18 | 10 mm th 1 :4 |
| 19 | Neat cement plunning about 1.5mm thick in wall dado, window sills, floors, drains etc. using cement @ .152 cu m/100 sq m |
| 20 | (A) Supplying fitting and fixing door frame with M.S. angle as per drawing & direction of required section |
| 21 | Supplying fitting fixing M.S. Clamps for door and window frames made of flat bent bar, end bifurcated with necessary screws etc. bycement concrete (1:2:4) as per direction (cost of concrete will be paid |
| 22 | Iron butt hinges fitted and fixed with new scres. 100 mm |
| 23 | Iron Hasp Bolt |
| 24 | Iron Socket Bolt 225 x 10 mm dia |
| 25 | a) MS or WI ornamental Grill of approved design joints continiously welded with M.S. W.I flats and bars for windows , railing etc. fitted & fixed necessary screws and lugs complete. |
| 26 | a) Primer one Coat to timber or plastered surface or on steel or other surface with synthetic enamel / oil bound primer of approved quality including smmothening surfaces by sand papering etc. on steel surface |
| 27 | A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface throughly by sand papering etc. including using of approved putty etc. on the surface, if necessary. |
| 28 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of pproved make in position complete excluding \"P\" or \"S\" trap (excluding cost of concrete for fixing). |
| 29 | Supplying,fitting and fixing cast iron \"P\" or \"S\" trap conformimg to I.S. 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed surface. (Painting to be paid seperately). |
| 30 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992single socketed 3m length |
| 31 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992vent cowl |
| 32 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80(medium duty) conforming to ASTMD - 1785 |
| 33 | Supplying, fitting and fixing bib cock or stop cock.(f) (i) Polythene Bib Cock / Stop Cock (HD) with metal inlet (EMCO /ATLAS or equivalent) |
| 34 | Supplying P.V.C. water storage tank of approved quality with closed topwith lid (Black) - Multilayer |
| 35 | Labour for boring tube well of required dia . By Water Jet System though any type of soil strata -----------------------------tube well pipe and the bore. |
| 36 | Supplying PVC pipes 40 mm dia |
| 37 | Supplying PVC strainer 40 mm dia |
| 38 | Applying Decorative Cement Base Paint |
| 39 | Supplying fitting fixing plug of approved make conforming to I.S. specification. |
| 40 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with drybrick work upto 1.6 metre from the bottom having 150 mm intermediate cement brickwork (1:4) band all round and cement brick work (1:4) |
| 41 | GST-12% |
| 42 | Labour Cess-1% |
AI Tender Summary
Tender Timeline
Dec 26, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 31, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 02, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender