Sub: Invitation Of Tender For Supply Of Equipment’S And Material At Various Department Through E Procurement Portal.

Sharing tender

Sub: Invitation Of Tender For Supply Of Equipment’S And Material At Various Department Through E Procurement Portal.-1 Rockwell cum Brinell Hardness Testers- Facility for Brinell and Rockwell tests with standard accessories and set of specimens. Fully automatic digital type, Load up to 250 kg. , Rockwell Scale- A, B, C , Hardness Resolution - 1.0 of a Rockwell Unit 2 Digital impact testing machine- Facility for Charpy and Izod tests, fully automatic digital type, along with standard accessories. Pendulum Drop Angle - 140 °C for Charpy Test and 87 °C for Izod Test, Distance of axis of hammer rotation and center - 825 mm 3 Bernoullis Theorem Apparatus- Supply & receiving chambers of 0.2 m. x 0.2 m. x 0.7 m. height with gauge glass & scale fittings for the measurement of total potential head, & interlinking duct made of thick transparent perspex sheet smooth variable cross section, quality transparent piezometer tubes to measure the pressure head along the duct, & a flow control valve. M.S. reservoir of size 0.9 m length x 0.55 m width x 0.45 m height, drain valve of 1⁄2 ” size & a bend. M.S. collecting as well as measuring tank of size 0.6 m length x 0.35 m width x 0.45 m height & drain valve of 1” size. A gauge glass & scale fitting are fitted on measuring tank for discharge measurement.1⁄2 HP high head monoblock pump for water circulation. Entire unit is powder coated with good colour combination 4 Venturemeter & Orificemeter Apparatus- Venturimeter 1” size having 13 mm throat diameter with 2 G.M. valves. Orificemeter suitable for 1” size pipe line &M.S. reservoir of size 0.4 m (w) length x 0.35m (h) width x 0.8 m (L) height. d/D ratio is 0.6 with 2 G.M. valves. M.S. collecting as well as measuring tank of size 0.5 m length x 0.35 m width x 0.35 m height drain valve of 1” size. A gauge glass 0.4 m height double column differential manometer. (without Mercury) & scale fitting are fitted on measuring tank for discharge measurement.1⁄2 HP high head monoblock pump for water circulation. Entire unit is powder coated with good colour combination. 5 Digital manometer - 0 to 400 mm of Hg 6 Point Load Index Tester (Digital)- Ref. Standard - IS:8764 Range : 0 to 50 kN Maximum Specimen Size : 80 mm Maximum Pressure : 70 MPa Operating Temperature:: -10 to +50 ℃ 7 Universal Automatic Compactor- Universal Automatic Compactor, IS : 2720 (P-vii & viii), IS : 10074-82 Motorized for 100 & 150 mm moulds. Two sets of rammer 2.6 kg x 310 mm drop & 4.89 kg x 450 mm drop as per ISS/ BSS. One CBR Mould with collar & perforated base plate. l/5th revolution per stroke of rotating base plate with Automatic blow counter. 230V, 1 Phase, 50 cycles, A.C. supply. 8 Soil Cone Penetrometer :Digital-  Cone Penetrometer. Complete with Stainless Steel Test Cone.  Digital Ref. Standards IS:2720 (Part 5) BS 1377 : digital penetration measurement gauge 0.01 mm precision, release button and automatic zeroing.  Bench mounted apparatus to determine the liquid limit of soils BS1377.  30deg, 30mm long test cone. Manufactured from stainless steel and includes adjustable levelling feet.  Electronic Timer Unit  Penetration Range : up to 50 mm  The unit is protected with an anti-surge fuse and is powered from  electrical supply 9 Infra-Red Moisture Meter- Infra-Red Moisture Meter :Ref. Standard: IS:2720 (Part 2) Moisture Range : 0% to 100% Measuring Accuracy of Moisture : 0.5% Amount of Samples ≥ 0.5 g Weight of Measurement Samples : 0.5g - 60g 10 Digital Heating block (COD Digester)- Bores: 2 x 12 with 16 mm outer diameter Display Colored, backlit LCD touch screen Operation: Icon-based menu guidance via touch screen Temperature range: 40–160 °C (1 °C increments) Warm up time: From 20 °C to 160 °C within 10 minutes Time range: 0 h 01 min–9 h 59 min (increments 0 h 01 min),Temperature stability: ±1 °C , Interfaces: Bidirectional serial RS232, USB A (function) and USB B (Host), Operating range: 10–40 °C, max. 80 % relative humidity (non-condensing), Power supply: 110–230 V AC, 50 / 60 Hz, Power consumption: 300 / 550 W, Dimensions: 290 x 287 x 146 mm, Weight: 3.2 kg, Power cable, manual, data cable, software CD 11 Probes of HACH make for pH, and Conductivity- HACH-pH C201 Accuracy: ±0.02 pH , Application: Clean Samples Cable Length:1 m (3.28 ft), Electrode Type: Non-Refillable Gel Reference Element, semi-liquid gel Junction: Porous Pin Junction, Length: 175 mm (6.89 in.), Method Type: Laboratory: Non-Refillable Gel Reference Element, semi-liquid gel Parameter: pH, Probe, Type: Standard, Product Kit: Model: PHC201, Range: 0 - 14 pH, Reference Type: Ag/AgCl (double junction), Resolution: 0.001/0.01/0.1, Sample depth: 15 mm (0.59 in.) Sensor material: Epoxy, Sensor Type: pH Glass, Sodium (Alkalinity) error: <20% at pH 14 in 1 M NaCl Special Features: General purpose. Clean water samples. Temperature Accuracy: ±0.3 °C (±0.54 °F) Temperature Range:0 - 80 °C (32 - 176 °F), Temperature Resolution:0.1 °C (0.18 °F) Test requirements: Parameter ,Needed: pH, Minimum Sample Depth (mm): 15, Thermistor: ATC, Weight: 0.1 kg HACH-CDC40103 Accuracy: Cond: ±0.5% of reading, Salinity: ±0.1, ±1 digit, TDS: ±0.5% ±1 digit, Cable Length:3 m (9.84 ft), Electrode Type: Conductivity Cell; 4 Poles - Graphite, Length: 184 mm (7.24 in.), Method Type: Field: 4 Poles – Graphite, Parameter: Conductivity , Probe Type: Standard, Product Kit: Model: CDC401,Range: Conductivity: 0.0 μS/cm - 200 mS/cm,