Military Engineer Services-MES has published Tender For Improvement Of Security Wall And Repair To Security Perimeter Fencing, Pathway And Other Misc Works At Bd Bari Mil Stn Under Ge Kaluchak. Submission Date for this Tender is 21-01-2023. Footpath Work Tenders in kaluchaK Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 14-Jan-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 21-01-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of brickwork or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc., but excluding ashlar facing, dressed stone work and precast concrete articles, complete all as specified & directed. |
| 2 | Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified & directed. |
| 3 | Demolition of reinforced cement concrete of any description in any position not otherwise specifically provided for(Reinforcement cut as required to facilitate demolition), complete all as specified & directed. |
| 4 | Taking down cement plaster on brick or stone surfaces of wall/ceiling, chajjas, roof projections etc upto triple storey etc. including raking out joints, hacking for key, scrubbing down with water etc, complete all as specified & directed. |
| 5 | Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:4, complete all as specified & directed. |
| 6 | Brickwork with sub-class ‘B’ bricks (old size), straight or curved on plan exc. 6m in mean radius, built in cement mortar 1:4 but except brick i.e. using serviceable bricks obtained from Srl item No. 04 here-in-before, complete all as specified & directed. |
| 7 | PCC 1:2:4, nominal mix, type B-2, using 40mm graded crushed stone aggregate as in surface channel and drains including necessary form work, complete all as specified & directed. |
| 8 | PCC 1:4:8, nominal mix, type D-2 using 40mm graded crushed stone aggregate as in foundations, filling & mass concrete, complete all as specified & directed. |
| 9 | RCC M-25, design mix, using 20mm graded crushed stone aggregate as in beams, cantilevers, bressummers, lintels over 1.5m span, complete all as specified & directed. |
| 10 | RCC M-25, design mix, using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts, complete all as specified & directed. |
| 11 | RCC M-25, design mix, using 20mm graded crushed stone aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete, complete all as specified & directed. |
| 12 | Use & waste of form work to sides of concrete foundation, footings, bases of columns, rafts and raft beamsand similar work; vertical or to batter for rough finished surfaces of concrete, complete all as specified & directed. |
| 13 | Use & waste of form work to sides of pillars, posts, structs, columns (square, circular rectangular on plan or polygonal etc. for rough finished surfaces of concrete, complete all as specified & directed. |
| 14 | Use & waste of form work to sides and soffits of floor or roof beams, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc alo splays between floors and beams for rough finished surfaces of concrete, complete all as specified & directed. |
| 15 | TMT bars 10mm dia & over, cut to length, bent to shape required including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to grade Fe-500, complete all as specified & directed. |
| 16 | TMT bars 5mm dia & over upto & including 10mm dia in stirrups, spacers and binders, cut to length, bent to shape required and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips, conforming to grade Fe-500, complete all as specified & directed. |
| 17 | Dismantling of old rusted galvanised barbed wire/plain GI wire of any size & type in any position, complete all as specified & directed. |
| 18 | Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured), complete all as specified & directed. |
| 19 | All as per Srl item No 18 above but except barbed wire. |
| 20 | Barbed razor tape concertina coil SG hot galvanised spring tensile wire as approved by GE, dia of coil when stretched 1000mm having minimum number of circles 12 RM to 13 RM, minimum number of clips 15/RM & minimum weight of coil 0.96 Kg/RM hot dip galvanised, complete all as specified & directed. |
| 21 | 15mm thick rendering in cement mortar1:4 onfair faces of brick surfaces or concrete surfaces, surface finished even and smooth without using extra cement, complete all as specified & directed. |
| 22 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified & directed. |
| 23 | Mild steel framed work as in grills, gratings, etc. with ends of bars shouldered and or reveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work conforming to Fe-290 grade-E-165, complete all as specified & directed. |
| 24 | Mild steel framed work as in hand rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for balusters running bars, for doors, balusters, nosing to steps including embeding in concrete and screwing etc. wind ties for roof including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165, complete all as specified & directed Note : Unit rate shall deemed to include locking holes after fixing of barbed wire and welding to bent up portion as directed. |
| 25 | Excavation in post holes (or similar holes) each not exc. 0.50 cum, in any type of soil and getting out, returning filling in and ramming earth or broken rubble mixed with earth around in layers not exc. 25cm, watering and removal of excavated materials to a distance n. exc. 50m and making good surfaces, complete all as specified & directed. |
| 26 | PCC 1:3:6 nominal mix, type C-2 using 40mm graded crushed stone aggregate as in foundations, filling & mass concrete, complete all as specified & directed. |
| 27 | Mild steel screw bolts (machine made) with hexagonal or square heads at one ends and screwed the other ends, or screwed both ends, each screwed ends to be fitted with washers and one hexagonal or square nut exc 10cm but n exc 20cm long, diametre of shank 10 to 15mm, complete all as specified & directed. |
| 28 | Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc., including provission of binding wire, complete all as specified & directed. |
| 29 | Supply only chain link fencing of 4.00mm dia galvanised steel wire, conforming to IS:2721:2003, 50x50mm meshincluding line wires, straining bolts,binding wire etc, complete all as specifed & directed. |
| 30 | Mild steel round bars 10mm dia, cut to length, bent to shape required includinghooking ends, fixed to chain link fencing at top & bottom, complete all as specified & directed. |
| 31 | Precast cement concrete 1:2:4 (nominal mix), type B-0 using 12.5mm graded crushed stone aggregate as in louvers and jallies 50mm thick (measured solid) including all mouldings but excluding frame, set in cement mortar 1:4 complete all as specified & directed. |
| 32 | 100mm thick PCC 1:4:8 (nominal mix), type D-2 using 40mm graded crushed stone aggregate as in sub base of floor, complete all as specified & directed. |
| 33 | Precast designer coloured paver tiles (factory made rectified) of size 300mmx300mm x 20mm, top layer glazed made in any type of cement and pigment, in required patterns (compressive strength not less than 250 Kg per Sqcm) as approved by GE in floor etcset & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4, complete all as specified & directed. |
| 34 | Precast designer coloured heavy duty full body paving tiles (factory made)of size 300mmx300mm x 10mm, top layer glazed made in any type of cement and pigment, in required patterns as approved by GE in floor etcset & jointed in neat cement slury & pointed in white or coloured cement mixed with pigment to match over and including 15mm thick screed layer in cement mortar 1:4, complete all as specified & directed. |
| 35 | 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade confirming to IS-15658-2006 of approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of fine sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand, complete all as specified & directed. |
| 36 | Preparation of new or previously untreated steel surfaces of any description over 10cm width or girth and applying two coats ofsynthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified & directed. |
| 37 | Preparation of new plastered or concrete surfaces of wallsand applying two coats of cement base paint over a coat of cement primer, complete all as specified & directed. |
| 38 | Preparation of old painted wooden or wood based surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified & directed. |
| 39 | Preparation of old decorated plastered or unplastered surfaces of walls by brooming down or by steel wire brushes, scrapingdown smoke spots, moulds, moss and efflorescent salts, trading oil, greasy spots etc. and applying one coat of cement base paint, complete all as specified & directed. |
| 40 | 300mm thick PCC 1:2:4, nominal mix, type B2, using 40mm graded crushed stone aggregate as in aprons, base slab supported on base floors and similar work, surface finished even and smooth without using extra cement including necessory form work,complete all as specified & directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
