Tender For Construction Of Source Work, Pump House, Cwr, Laying Of Rising Main, Feeder Main And Distribution Lines Including All Civil And E And M Works With Other Appurtenant Works Of Pinron Pumping W/S Scheme Of Block Bhimtal Under Jjm.
Tender Value
Ref. Documents
Estimated cost
Bid Submission
09 Jan 2023
0 days left
EMD
2 Lakhs
Bank guarantee accepted
Document Fee
4720
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bhimtal → Uttarakhand
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Source Work, Pump House, Cwr, Laying Of Rising Main, Feeder Main And Distribution Lines Including All Civil And E And M Works With Other Appurtenant Works Of Pinron Pumping W/S Scheme Of Block Bhimtal Under Jjm.
BOQ
| Sl. No. | Item Description |
| 1 | Civil WorksProviding of all materials, Carting from site store to site of work, Lowering into trenches with true to alignment, Laying of MS ERW Pipes grade Yst 210, Jointing by electric welding process with proper grade of eletrodes suitable for jointing of water supply pipe lines (Ador, L&T or equivalent electrodes) by cutting of pipes and making required bends by welding, completion of work with testing of pipe line etc complete. |
| 2 | 65 mm dia 4.8 mm thick |
| 3 | Excavationfor pipe lineAssuming that 90% pipe line is laid in trenches, it is estimated that 75% excavation will be done in soil mixed with shingle, bajri & boulders and rest 25% will be done in medium rock. |
| 4 | Soil mixed |
| 5 | Medium Rock |
| 6 | Supply and fixing of the following fittings including cartage of materials labour T&P and testing of valves etc. complete |
| 7 | 65 mm dia reflux valve |
| 8 | Providing and fixing double acting air valve |
| 9 | 65 mm dia double orifice air valve |
| 10 | Supply of all materials, labour, T&P etc. Complete and construct anchor/thrust blocks in RCC 1:2:4 for rising main excluding cost of steel 20 nos.0f 0.75x0.75x0.75 size |
| 11 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level.Mild steel and Medium Tensile steel bars |
| 12 | Supply of all materials, labour, T&P etc. and construction of 60cm x 60cm x 75cm size Wheel Valve chamber . |
| 13 | Providing and laying in position specified grade of reinforced cement concrete: 1:1.5:3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size) - Plinth Band, Lintel Band, shelves etc. |
| 14 | Steel work welded in built up section/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using steel etc. as required. for window, ventilator and similar works. use angle, square bar, etc |
| 15 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in Cement mortar 1:6 (1 cement : 6 coarse sand). |
| 16 | Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 12.5mm nominal size). |
| 17 | Random Rubble Stone Masonry |
| 18 | Random Rubble Stone Masonry laid in 1:6 cement and sand mortar, in breast walls, retaining walls, parapets, scuppers, etc. including supply of all material, labour, T&P and royaltiies etc. complete as per drawing and technical specifications |
| 19 | Same as above item no 3(a)but laid in dry |
| 20 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:2:4 (1 Cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 21 | Supply of all materials, labour, T&P etc and construction of R.C.C.C.W.R. of following capacities ( in kiloliters ) with MS ladder outside and inside of the tank , M.S. M.H. cover with locking arrangement, ,supply and fixiing of outlet, inlet, over flow and wash out pipes with necessary sluice valves, pipe pieces (including cost of materials) flooring 0.60 M wide apron, painting on tank body vertical pipes, ladder, M.S. M.H. cover, ventilator column etc. complete with approved water proofing (apex)/enamal paint, testing,filling water for testing purpose etc. including supply of vertical pipes , specials, and testing of tank, assuming bearing capacity as 8MT/M2 |
| 22 | 25 KL Sump |
| 23 | 40 KL CWR |
| 24 | 45 KL Sump |
| 25 | Supply and installation of bucket type chlorinator of 25 liters capacity compete. |
| 26 | Providing of all materials, Carting from site store to site of work,Laying & jointing of GI (M) screwed pipes (including supply of all jointing materials, white lead, hemp and oil etc) in trenches withits cutting, threading and testing of pipe line etc complete. |
| 27 | 15 mm dia (Balance FHTC) |
| 28 | 20 mm dia |
| 29 | 25 mm dia |
| 30 | 32 mm dia |
| 31 | 40 mm dia |
| 32 | 50 mm dia |
| 33 | Cartage of following sizes of valves,lowering them into trenches and fixing the same on water supply line including the cost of valves, specials lobour T&P complete in all respect but excluding the cost of excavation and chember |
| 34 | 32 mm dia |
| 35 | 40 mm dia |
| 36 | 50 mm dia |
| 37 | Air valves (Class-I)as per I S 788/1997. |
| 38 | 15mm dia |
| 39 | 20mm dia |
| 40 | Supply of all materials, labour, T&P etc. and construction of 60cm x 60cm x 75cm size Wheel Valve chambers. |
| 41 | Concrete with cement, coarse sand and 40 mm gauge stone ballast in proportion 1:4:8 in foundations and floors including supply of all material, labour and T&P etc. requiredor proper completion of the work. as per drawings and technical specifications |
| 42 | Dismantling of following dia screwed and socketed G.I. Pipes, specials and fittings including taking out of dismantled G.I. pipes and specials from trenches and stacking them properly within 50m but excluding the cost of earth work. |
| 43 | 15 mm dia |
| 44 | 20 mm dia |
| 45 | 25 mm dia |
| 46 | 32 mm dia |
| 47 | 40 mm dia |
| 48 | Carting, laying & jointing fixing and testing of dismantled pipes includinglowering them into trenches , laying true to alignment & gradient , laying & jointing of pipe line including cutting & threading of pipe for making up lengths as required for proper completion of work |
| 49 | 15 mm dia |
| 50 | 20 mm dia |
| 51 | 25 mm dia |
| 52 | 32 mm dia |
| 53 | 40 mm dia |
| 54 | Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 meters lead as per direction of Engineer in charge. - for Nominal concrete 1:3:6 or richer mix. |
| 55 | Making connection with the existing M.S. Galvanised mains of upto 25mm nominal dia, including cutting and threading of pipe, bailing out water, fixing, if required, specials and testing etc. complete, but excluding cost of insertion pipes and specials besides boring out (and also subsequent back fill) existing main. |
| 56 | 15 mm to 25 mm |
| 57 | 32 mm to 40 mm |
| 58 | Inserting and fixing water meters or fittings such as stop cocks, wheel valves etc. in the existing G.I. pipe lines including cutting and threading pipe and making long threads etc. complete, |
| 59 | Upto 25 mm size |
| 60 | 32 mm to 40 mm |
| 61 | Providing and fixing with all materials T&P labour Functional House Hold Tap Connection etc complete. [For Base Year Balance HH] |
| 62 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers asrequired complete as per the direction of Engineer-in-charge Made of |
| 63 | G.I. wire of dia 4 mm |
| 64 | Supply and fixingof MS angle for above work . |
| 65 | 20mm thick plaster with cement and fine sand in 1:4 including racking of joints upto 1.27cm.depth,supply of all materials labour T&P required for proper completion of the work. |
| 66 | Provide all materials labour T&P etc. completeand fixing of MS Gateas per departmental type design. |
| 67 | E&M WorksM.P.S (Stage-I) |
| 68 | Supply of high head horizontal multi stage CENTRIFUGAL pumping plant to deliver 230LPM 390Mtr. Head With CouplingSupply of Induction motor T.E.F.C 2900 RPM operating at 415± 10% volts 3 phase 50C/S A.C. supply Suitable for above Pumpset.Supply of M.S. fabricated base plate for above pump and motor set, with coupling guard. |
| 69 | Supply of 40 H.P Fully automatic Auto Transformer starter as per Specification and site requirement. |
| 70 | Supply of Control Panel as Per Specification and site requirement. |
| 71 | Supply of Power Wiring material as per Specification and site requirement as below. |
| 72 | 50 mm² Al. conductor 3½ core XLPE/PVC insulatedarmoured cable of 1.1 KV grade |
| 73 | 25 mm² copper conductor, 3 core,PVC insulated submersible flat cable of 1.1 KV grade |
| 74 | Jointing material such as lugs, tape etc. |
| 75 | Earthing Material as per site requirement and specifications. |
| 76 | MAIN PIPING AND VALVES ( Suction / Delivery side/ By pass) as per Specification and site requirement. |
| 77 | GAUGES as per Specification and site requirement. |
| 78 | Tools as per site requirement. |
| 79 | Supply of Rubber Resistance Sheet of size 1m x 2m x0.025m |
| 80 | Supply of 100KVA Servo control voltage stabilizer as per specification and site requirement. |
| 81 | 125 Amp TPN main switch |
| 82 | Chain Pulley 2 Tonne capacity 4 Mtr lift |
| 83 | Installation, Testing and commissioning of Pumping Plants |
| 84 | Testing At manufacturer works |
| 85 | Painting of entire installation |
| 86 | Internaland external electrification |
| 87 | Carting of Pumping Plantsincluding all accessories |
| 88 | One month TrialRunning & Five month Maintenance including watch & ward. |
AI Tender Summary
Tender Timeline
Dec 24, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedJan 09, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 11, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender