Public Administrative Department Local Bodies Closing in 0 days TDR #35437360

Tender For Proposed Construction Of Cremation Shed And Pathway In Boudh Samaj Smashan Bhoomi In Ward No 17 Under Dalit Vasti Sudhar Yojana For Nagar Panchayat Chakur

Issued by Local Bodies · chakur, Maharashtra
Tender Value
22.45 Lakhs
Estimated cost
Bid Submission
03 Jan 2023
0 days left
EMD
22457
Bank guarantee accepted
Document Fee
2300
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
chakur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Proposed Construction Of Cremation Shed And Pathway In Boudh Samaj Smashan Bhoomi In Ward No 17 Under Dalit Vasti Sudhar Yojana For Nagar Panchayat Chakur

BOQ

Name of Work:a) PROPOSED CONSTRUCTION OF CREMATION SHED & PATHWAY IN BOUDH SAMAJ SMASHAN BHOOMI GAT NO.23 N.P.H. NO 3569 IN WARD NO 17 UNDER DALIT VASTI SUDHAR YOJANA FOR NAGAR PANCHAYAT CHAKUR
Sl. No. Item Description
1CREMATION SHED
2Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50 m. beyond the building area & stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.5 m.)SSR 2020-21 ITEM NO. 21.02 & PAGE NO.148
3Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting etc. complete. (Lift upto 1.50 m) SSR 2020-21 ITEM NO. 21.06 & PAGE NO.148
4Excavation for foundation in Soft rock and old cement or lime masonry foundations including removing the excavated material upto a distance of 50 metres beyond the building area and stacking as directed, including dewatering, preparing the bed for the foundation and necessary back filling with available earth /murum, ramming, watering including shoring and strutting etc. complete (lift upto 1.5m)SSR 2020-21 ITEM NO. 21.14 & PAGE NO.149
5Filling in plinth and floors withapprovedexcavated material in 15cm. to 20cm. layers including watering and compacting etc. complete.SSR 2020-21 ITEM NO. 21.36 & PAGE NO.152
6Filling in plinth and floors with contractorsmaterial/brought from outside and approved by Engineer inchargein layers of 15cm. to 20cm.including watering and compaction etc. complete.SSR 2020-21 ITEM NO. 21.37 & PAGE NO.152
7Providing dry / trap / granite / quartzite / gneiss rubble stone soiling packing and compacting etc, complete SSR 2020-21 ITEM NO. 21.38 & PAGE NO.152
8Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete.With natural sand/V.S.I. quality Artificial SandSSR 2020-21 ITEM NO. 24.01 & PAGE NO.169
9Providing and laying Cast in situ/ Ready Mix cement concrete in M20 of trap/ granite/ quartzite/ gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing uneven and honey combed surface and curing etc. complete. The Cement Mortar 1:3 plaster is considered for rendering uneven and honey combed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulin etc.(Wooden centering will not be allowed.),with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Panmixer) etc.complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc)SSR 2020-21 ITEM NO. 24.10 & PAGE NO.170
10Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR 2020-21 ITEM NO. 25.31 & PAGE NO.173
11Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. beams and lintels as per detailed designs and drawings or as directed including centering, formwork, cover blocks, laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. complete. (Excluding reinforcement and structural steel). with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR 2020-21 ITEM NO. 25.5 & PAGE NO.175
12Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap/ granite / quartzite/ gneiss metal for R.C.C. slabs and landingsas per detailed designs and drawings including centering, formwork, cover blocks, laying/pumping, compactionfinishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete,(Excluding reinforcement and structural steel).with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With natural sand/V.S.I. quality Artificial Sand SSR 2020-21 ITEM NO. 25.70 & PAGE NO.176
13Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. SSR 2020-21 ITEM NO. 26.33 & PAGE NO.182
14Providing second class Burnt Brick masonry with conventional/ I.S. type bricks in cement mortar 1:6 in foundations and plinth of inner walls/ in plinth external walls including bailing out water manually , striking joints on unexposed faces, raking out joints on exposed faces and watering etc. Complete. SSR 2020-21 ITEM NO. 27.01 & PAGE NO.189
15Providing internal cement plaster 12mm thick in single coat in cement mortar 1:3 withoutneeru finish to concrete or brick surfaces, in all position including scaffolding and curing etc.complete. SSR 2020-21 ITEM NO. 32.06 & PAGE NO.201
16Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1 kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rough to receive the sand faced treatment 6 to 8 mm thick in cement mortar 1:4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc.complete. SSR 2020-21 ITEM NO. 32.11 & PAGE NO.201
17Providing and applying priming coat on concrete /masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter and sand papering as required etc. complete.SSR 2020-21 ITEM NO. 35.21 & PAGE NO.216
18Providing and applying three coats of water proof cement paint of approved manufacture and of approved colour to NEW plastered surfaces including scaffolding if necessary, cleaning and preparing the surface, watering for two days etc. complete. Apex colour SSR 2020-21 ITEM NO.35.15 & PAGE NO.216
19Supplying and erecting at site cremation cast iron burning stand etc. complete work
20Providing and fixing 50mm dia medium class G. I. gate with wicket gate of approved drawing with all features and fittings in two leaves with strong hold fast embedded in c.c. block at top and bottom with locking arrangement including cutting bending making holes and with two coat of colour etc.
21In SSR for items of supply of Rubble, Murum, Soil, 60mm./40mm. metal (Hand broken), royalty charges are not included in the rates. For the items of sand and crushed metal rates are inclusive of royalty charges.Prevalent Royalty charges shall be separately considered while preparing estimate and shall bepart of Schedule-B of tender.Any revision in Royalty charges shall be included in the rate analysis of the respective item. If there is variation in Royalty charges the difference shall be paid extra over the items to the contractor and shall be recovered if the Royalty rates are reduced by Govt.i.e Revenue department[As per Govt. of Maharashtra, Revenue and Forest Departments Gazette No.67 Dt.15 May,2015. States that the royalty charges ofRs.141.34/Cu.M. ) are considered.FOR SAND
22FOR OTHER MATERIAL
23Laboratory testing charges are not considered in the Rate Abstracts. Where ever required separate item shall be taken in the estimate for material testing charges, on the basis of testing frequency and charges fixed by Vigilance & Quality Control Circle, for the current year and shall form part of tender.testing of material by Quality control and certified quality must be use by contractor.BASIC TEST OF AGGREGATE Water Absorption, Specific Gravity, Impact Value, Crushing Value
24STEEL TENSILE STRENGTH, % ELONGATIUON ,YIELD STRESS, WEIGHT PER METER,BEND/REVEND TEST,PROFF STRESS(6MM TO 16MM STEEL BAR)
25Compressive strength of C.C.Cube (Set of 3 cubes)
26Concrete Mix Design (With all Tests on basic materials)
27PATHWAY
28Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum including dressing section to the required grade, camber and side slopes and conveying the excavated materials with all lifts upto a lead of 50m. and spreading for embankment or stacking as directed. SSR 2020-21 ITEM NO. 2.11 & PG. NO.27
29Supplying hard murum/ kankar at the road site, includingconveying and stacking complete. SSR 2020-21 ITEM NO. 2.29A & PG. NO.29
30Spreading hard murum/ soft murrum/ gravel or kankar for side width completeSSR 2020-21 ITEM NO. 2.30 & PG. NO.29
31Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)80 mm Metal, By breaking Boulders (Hand broken).SSR 2020-21 ITEM NO. 50.56 & PG. NO.334
32Supplying trap/granite/quartzite/gneiss stone metal of required size by bringing the boulders / Rubble at the road side breaking them to required gradation including conveying the boulders /Rubble and stacking the broken metal etc. complete . (Prior approval of sample stack of broken metal by the Ex. Engineer is necessary the date of approval will form part of the measurements) a)40 mm Metal, By breaking Boulders (Hand broken).SSR 2020-21 ITEM NO. 50.57 & PG. NO.334
33Spreading 80/40 mm metal for road work including sectionong etc complete as directed by Engineer in charge SSR 2020-21 ITEM NO. 50.58 & PG. NO.334
34Supplying & stocking on site 6MM CRUSHED METAL FOR BED CONCRETE sub-base etc.complete SSR 2020-21 ITEM NO. .. & Page. NO.471
35Compacting the sub grade / gravel / size metal (100 mm loose) layers for all widths with Power roller having weight 8 to 10 MT. including necessary, labour, materials and artificial watering complete.SSR 2020-21 ITEM NO. 50.61 & SR. NO.334
36Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed design
37Providing and laying Cast in situ/Ready Mix cement concrete in M-10 of trap/ granite/ quartzite/ gneiss metal for foundation and bedding including bailing out water, Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided, finishing if required and curing complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finelywashed etc)SSR 2020-21 ITEM NO. 24.01 & PG. NO.169
38Providing and laying Cast in situ/Ready Mix cement concrete in M20 of trap/ granite/quartzite/gneiss metal for bed blocks, foundation blocks and such other items including bailing out water, Steel centering, formwork, laying/ pumping, compacting, roughening themif special finish is to be provided, finishing uneven and honeycombed surface and curing etc. complete. The Cement Mortar 1:3 plaster isconsidered for rendering uneven and honeycombed surface only. Newly laid concrete shall be covered by gunny bag, plastic, tarpaulinetc. (Wooden centering will not be allowed.), with fully automatic micro processor based PLC with SCADA enabled reversible Drum Typemixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Natural Sand / Crushed sand VSI Grade finely washed etc) SSR 2020-21 ITEM NO. 24.10 & PG NO.170
39Providing and fixing heavy duty interlocking concrete RUBBER GLOSSY PAVING BLOCKS of 60 mm thickness of having a strength of 400kg/sq.m of approved quality and shape on a bed of crushed sand of 25 to 30 mm thick including striking joints and cleaning etc complete (using 100% crushed sand )
40In SSR for items of supply of Rubble, Murum, Soil, 60mm./40mm. metal (Hand broken), royalty charges are not included in the rates. For the items of sand and crushed metal rates are inclusive of royalty charges.Prevalent Royalty charges shall be separately considered while preparing estimate and shall bepart of Schedule-B of tender.Any revision in Royalty charges shall be included in the rate analysis of the respective item. If there is variation in Royalty charges the difference shall be paid extra over the items to the contractor and shall be recovered if the Royalty rates are reduced by Govt.i.e Revenue department[As per Govt. of Maharashtra, Revenue and Forest Departments Gazette No.67 Dt.15 May,2015. States that the royalty charges ofRs.141.34/Cu.M. ) are considered.SSR 2020-21 ITEM NO. 24.10 & PG NO.170 FOR OTHER MATERIAL
41Laboratory testing charges are not considered in the Rate Abstracts. Where ever required separate item shall be taken in the estimate for material testing charges, on the basis of testing frequency and charges fixed by Vigilance & Quality Control Circle, for the current year and shall form part of tender.testing of material by Quality control and certified quality must be use by contractorCompressive strength of C.C.Cube (Set of 3 cubes)
42CONCRETE MIX DESIGN

AI Tender Summary

OUR REF NO 35437360
AUTHORITY Local Bodies
TENDER VALUE 22.45 Lakhs
LAST DATE 03-01-2023
Authority
Authority Name Nagar Panchayat
Work Description Proposed Construction Of Cremation Shed And Pathway In Boudh Samaj Smashan Bhoomi In Ward No 17 Under Dalit Vasti Sudhar Yojana For Nagar Panchayat Chakur
Basic Detail
Tender No cnp/2022/ward17/dalitvasti20
Bidding Type Tender
Location
City chakur
State Maharashtra
Key Dates
Publish Date 23 Dec 2022
Submission Date 03 Jan 2023
Open Date 05 Jan 2023
Finance
Tender Value 22.45 Lakhs
Tender Fee 2300
EMD 22457
Exemption Not Available
Document List
b3604873-2ca0-45a9-9126-345ac7cb3ada.html
b1.pdf
BOQ_1496336.xls
Tendernotice_1.pdf
Tendernotice_2.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

Dec 23, 2022
11:30 IST

Tender Published

Tender notice published.

Completed
Jan 03, 2023
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jan 05, 2023

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

b3604873-2ca0-45a9-9126-345ac7cb3ada.html

pdf

b1.pdf

xls

BOQ_1496336.xls

pdf

Tendernotice_1.pdf

pdf

Tendernotice_2.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender