Tender For Provision Of Equipment Store And Barber Shop At Training And Institutional Area For Certain Unit At Misa Camp Under Ge (S) Tezpur, tezpur-Assam

Provision Of Equipment Store And Barber Shop At Training And Institutional Area For Certain Unit At Misa Camp Under Ge ( S ) Tezpur - Surface excavation n. exc. 30cm deep and avererging 15cm deep and getting out,complete all as specified and as directed. 2 Surface dressing n.exc 15 cm deep in soft/loose soil complete all as specified and directed. 3 Excavation in post holes (or similar holes) each n exc 0.5 Cum getting out , returning , filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm,complete all as specified and as directed. 4 Excavation in trenches n exc 1.5 mtr depth nd n exc 1.5 m wide in soft/loose soil and getting out,complete all as specified and as directed. 5 Returning/Filling in trenches in layer n exc 25 cm thick including watering well ramming etc,complete all as specified and as directed. 6 Removing excavated soil to distance n exc 50 mtr and deposited as directed by Engr-in -Charge. 7 M&L Hard core of gauge n exc 63 mm of broken boulder below plinth protection/hard standing/floor,complete all as specified and as directed. 8 M&L for sand filling under floor or in foundation or in trenches including watering as required,complete all as specified and as directed. 9 M&Lfor 75 mm thick cement concrete in sub base of floor in cement mortar (1:3:6) type C-2 ,complete all as specified and as directed. 10 M&L PCC 1:3:6 type C-2 75 mm thick as in plinth protection even and smooth without using extra cement,complete all as specified and as directed. 11 M&L for 100mm thick .Cement Concrete 1:2:4 type B2 using 40mm graded aggtregate as in floor finshed even and smooth without using extra cement including filling of construction joint with Cm(1:6) complete all as directed. 12 M&L PCC (1:4:8) type D-2 using 40 mm graded stone agg as in fdn filling mass concrete,complete all as specified and as directed. 13 M&L for RCC M-25(Design Mix) ( 20 mm graded agg) as in foundation, base for column , plinth beam etc complete all as specified and directed 14 M&L for RCC M-25(Design Mix) ( 20 mm graded agg) as in column,post etc complete all as specified and directed 15 M&L for RCC M-25(Design Mix) ( 20 mm graded agg) as in roof slab supported on wall, beam, landing, desk slab etc complete all as specified and directed 16 M&L for RCC M-25(Design Mix) (20mm gradded agg) as Lintel/chajja etc complete all as specified and directed 17 M&L for RCC M-25(Design Mix) (20mm gradded agg) as Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed 18 Use & waste of form work of the side of the concrete foundation, footing, base of column rough finished flat surface,complete all as specified and as directed. 19 Use & waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick ( Horizontal or sloping),complete all as specified and as directed. 20 Use & waste of form work to the side of the column , rough finished flat surface area,complete all as specified and as directed. 21 Use & waste of formwork to side and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, verhangs etc also plays between floors and beams etc,complete all as specified and as directed. 22 Use & waste of formwork to edge of concrete flats, breks in flooors, openings in concrete walls , floors and roofs and sides of RCC/PCC bands in walls, horizontal or loppin and similar work all exceeding 20 cm wide(Where RCC/PCC band in walls spanning and opening , 23 S&F 10mm dia and over TMT bars as in reinforcement cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90 m dia,complete all as specified and as directed. 24 All as per Item No 23 but 5 mm dia and over upto including 10 m dia in stirrups, spacers and binder etc. 25 M&L brick work using sub class B brick (old size) curved or straight in plan exc 6 mtr mean radius in cm (1:6),complete all as specified and as directed. 26 M&L brick work using sub class ‘B’ bricks (old size) straight or curved on plan to any radius in half brick work built in CM 1:4 ,complete all as specified and as directed. 27 M&L 15 mm thick plastering on other than fair faces of wall surfaces in cm (1:6) complete all as specified and directed 28 M&L 5 mm thick plastering on ceilling concrete surface in cm (1:3) even and smooth w/o using extra cement,complete all as specified and as directed. 29 M&L for rendering 20mm thick in cement mortar 1:4 in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces finished even & smooth ( WPC for finishing layer will be measured and paid seperately as supply only),complete all as specified and as directed. 30 M&L 15 mm thick screed bed or bedding layer of mortar in CM 1:6 fixing of tiles in floor,complete all as specified and as directed. 31 M&L 10 mm thick rendering in CM 1:4 on brick or concrete surfaces for fixing of tiles in wall,complete all as specified and as directed. 32 Supply only integral water proofing compound,complete all as specified and as directed. 33 M & L for Vitrified Ceramic tiles of dark shade 10 mm thick (square/ rectangular) polished, area of each tiles lot exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,complete all as specified and as directed. 34 All as item no33 above, but in dado 35 S &F chequered cement concrete coloured tiles (glossy finish) 20cm x 20cm x 25 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment complete all as specified and directed. 36 Forming Constrution (Dummy) joints 30 mm deep x 10 mm wide, filled with sealing compound grade A,complete all as specified and as directed. 37 M & L for two coats of exterior emulsion antifungus paint over a coat of primer over a coat of 2 mm thick wall care putty to wall including complete including preparation of surface as specified and directed 38 M&L for preparation of new plastered surface of ceilingand applying three coats of white wash,complete all as specified and as directed. 39 M&Lapplying two coats of distemper by smart painting method over a coat of primer over a coat of 2mm thick alayer of wall care puttyon walls,complete all as specified and as directed. 40 S&F MS Hold fast confirming to Fe-290 Gde E-165,complete all as specified and as directed. 41 M&L PCC (1:3:6) type C-1 as in bed block of hold fast using 20 mm stone agg steps etc,complete all as specified and as directed. 42 S & F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified 43 S & F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specifiedcomplete all as specified 44 Materials and Labour for mid steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed. 45 S/F 5.50mm thick ordinary quality sheet glass in squares exc 0.5 sqm in each pane fixed in aluminium frame,complete all as specified and as directed. 46 M&L for galvanised mild steel wire cloth of 0.56mm dia and average aparureof 1.4mmand fixed in position,complete all as specified and as directed. 47 Preparation of concrete roof surfaces applying roof treatment as under:-(a)Applying bitumineous primer @ 0.30 litre per Sqm of surface (Shalitex Primer of STP Limited or equivalent as approved by GE (b)Applying coat of hot applied bitumen 85/25 @ 1.20 Kg/Sq m of surfaces (Make : STP Ltd or equivalent as approved by GE)(c)Laying of APP Modified water proofing membrance 3mm thick with non-woven polyster Reinforcement on hot applied bitumen with 100mm over lap at joints by torching on the transverse direction and 75 mm on longitudinal directional all as per manufacturers instructions (Make : SUPER THERMOLAY OF STP LTD OR EQUIVALENT IWL/TEXSA) (d) Applying a coat of bituminious aluminium paint @ 0.10 litre/SQM (Super Silver sheild of STP Ltd or equivalent as approved by GE) 48 M&L for 15 mm thick screed bed in cm 1:3 mixed with WPC as per manufactures instruction finished even and smooth over RCC roof slab without using extra cement (WPC shall be measured seperately),complete all as specified and as directed. 49 S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length 150mm complete all as specified 50 S & FPre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws,complete all as specified and as directed. 51 S&Fsteel workin tubulartrusses/postsincludingspecialshaped washer etc completeusing ERWor inductionbutweldedtubes conformingto IS- 1161-1979 grade St-240 complete all as specified and directed 52 M & L framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc, n.exc 10Kg each brackets, conforming to 290 Gde-E-165(Brackets over 10 Kg each to be measured under Structural Steel complete all as specified and directed. 53 M&L preparation of new steelsurfaces and apply two coats of syntheticenamelled paint over a coat of red oxide primer over 10cm width or girth,complete all as specified and as directed. 54 M & L for point wiring for one light/fan/exhaust/bell point controlled by one way switch. with 1.5 Sq mm (nominal area) PVC insulated and unsheathed single core FRLS copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC concealed conduit and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and unsheathed single core FRLS cable 1100 volts grade with stranded copper conductor and connected to common earth dolly, with and including modular metal flush box & cover plate of suitable size complete for housing the modular switches, socket outlets, fan regulators etc. Note:- (i) Rate deemed to be inclusive of cutting chases and making good disturbed surface).(ii) Modular metal flush box & cover plate will be measured and paid under Relevant item. 55 All as per Item No 54 but one socket outlet 5 pin 6 amps on independent board. 56 All as per Item No 54 but one 5 amps socket outlet on same board with other switch. 57 M & L for point wiring with 2.5 Sq mm (nominal area) PVC insulated and unsheathed single core FRLS copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC concealed conduit and conduit accessories alongwith continuous earth wire 2.5 Sq mm PVC insulated and unsheathed single core FRLS cable 1100 volts grade with stranded copper conductor and connected to common earth dolly, with and includingmodular metal flush box & cover plate of suitable size complete for housing the modular socket outlets 6 in 15/16 Amp on independent board. Note:- (i) Rate deemed to be inclusive of cutting chases and making good disturbed surface).(ii) Modular metal flush box & cover plate will be measured and paid under Relevant item. 58 Supply and fix Modular switch one way 6 Amp,complete all as specified and as directed. 59 Supply and fix Modular switch one way 16 Amp,complete all as specified and as directed. 60 Supply and fix modular type electronic fan regulator,complete all as specified and as directed. 61 Supply and fix modular socket outlet 2 in 1, 3 pin 6 A,complete all as specified and as directed. 62 Supply and fix Modular socket outlet 16 Amps,complete all as specified and as directed. 63 Material and labour for ceiling rose polycarbonate isolated body 3 ways terminals,complete all as specified and as directed. 64 Supply and fixing modular metal flush box 2 modules complete all as specified and as directed. 65 Supply and fixing modular metal flush box 3 modules complete all as specified and as directed. 66 Supply and fixing modular metal flush box 8 modules complete all as specified and as directed. 67 Supply and fixing modular metal flush box 12 modules complete all as specified and as directed. 68 Supply and fixing modular white cover plate with frame 2 modules complete all as specified and as directed. 69 Supply and fixing modular white cover plate with frame 3 modules complete all as specified and as directed. 70 Supply and fixing modular white cover plate with frame 8 modules complete all as specified and as directed. 71 Supply and fixing modular white cover plate with frame 12 modules complete all as specified and as directed. 72 Supply and fixing LED fitting 20 watts high efficiency enviormental friendly long lifemounting on PVC round/square PVC block and making all connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed.Make :- Havells cat No. LHEXACP7INIW20 or equivalent makein Bajaj/Surya/Phillips/CG 73 Supply and fix sheet metal enclosures SPN DBs 8 way when MCBs to be used 240 Volts, double door all as specified and directed. Make :- HPL, Model No. MDBDD08 or equiavlent make in L&T /Havells/Legrand/Indo Asian 74 Supply and fixing 6-32 amp rating 240V, 10KA C curve miniature circuit breaker (MCB SPN) of single pole and neutral and current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed. 75 Supply and fixing 6-32 amp rating 240V, 10KA C curve miniature circuit breaker (MCB SP) of single poles and current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed. 76 Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Make: usha model No. 1200 mm techoair BLDC 5 Star or equivalent make in Crampton/Havells/Orient/Bajaj. 77 Supply and fix Exhaustfan 300 mm(min) sweep MS CRCA bodyand metal blades with double ball bearing metal protective bird guard , AC single phase, including electrical connection with twisted three core PVC insulated flexible cord of size 0.75 Sqmm copper conductor from celing rose complete all as specified and as directed.Make: Model-Aeroclean plus DBB GBD of Usha or equivalent make of Havells/Crampton/Bajaj 78 M&L for Brick Sub Class B locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection completeall as specified and as directed. 79 Supply,laying in repair in trenches of XLPE UG cable insulatedaluminium stranded conductor served with an inner sheathing or PVC tape heavy duty armoured upto 1100volts (earthed) GI steeel strip and overall PVC sheathed nominal cross sectional area 10 sqmm 2 core testing complete all as specified and directed. 80 S&F in replacementsteel water tubing 40 mm dia of bore light grade galvanised with all fittings laid in trenches / fixing with surface of wall after drawn through electric cable by means of nuts bolt and washers all as directed . 81 M & L for earthing complete with GI earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level ) with top edge of the plate not less than 1.5 m below normal ground level , connected to galvanised earth lead iron wire 4mm dia by means of GI bolts nuts and washers of galvanised iron or steel etc all as shown in electrical plate No.3 including earth work PCC pit and RCC pit cover, funnel with watering pipe ,wire mesh ,alternate layer of salt and charcoal, GI protection pipe light grade and testing on completion all as specified and directed by Engr-in-charge.Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount.Note 2-Contractors supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractors firm name while carriying out any activities in defence area for better check of security purpose.Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)

Sr No	CorrigendumDate	Corrignedum	CorrigendumType	NewSubmissionDate
1	07-Jan-2023	BOQ	BOQ	20-01-2023
2	20-Jan-2023	Bid Auto Extn Corrigendum	Bid Auto Extn Corrigendum	27-01-2023

INR 500 /-

INR 60400.0 /-

INR 30.19 Lakhs /-

Name of Work: Provn of equipment store and Barber Shop at Training and Institutional area for certain unit at Misa Camp under GE (S) Tezpur (2nd call)

Sl. No.	Item Description
1	Surface excavation n. exc. 30cm deep and avererging 15cm deep and getting out,complete all as specified and as directed.
2	Surface dressing n.exc 15 cm deep in soft/loose soil complete all as specified and directed.
3	Excavation in post holes (or similar holes) each n exc 0.5 Cum getting out , returning , filling in and ramming earth or broken rubble mixed with earth around in layers not exceeding 25 cm,complete all as specified and as directed.
4	Excavation in trenches n exc 1.5 mtr depth nd n exc 1.5 m wide in soft/loose soil and getting out,complete all as specified and as directed.
5	Returning/Filling in trenches in layer n exc 25 cm thick including watering well ramming etc,complete all as specified and as directed.
6	Removing excavated soil to distance n exc 50 mtr and deposited as directed by Engr-in -Charge.
7	M&L Hard core of gauge n exc 63 mm of broken boulder below plinth protection/hard standing/floor,complete all as specified and as directed.
8	M&L for sand filling under floor or in foundation or in trenches including watering as required,complete all as specified and as directed.
9	M&Lfor 75 mm thick cement concrete in sub base of floor in cement mortar (1:3:6) type C-2 ,complete all as specified and as directed.
10	M&L PCC 1:3:6 type C-2 75 mm thick as in plinth protection even and smooth without using extra cement,complete all as specified and as directed.
11	M&L for 100mm thick .Cement Concrete 1:2:4 type B2 using 40mm graded aggtregate as in floor finshed even and smooth without using extra cement including filling of construction joint with Cm(1:6) complete all as directed.
12	M&L PCC (1:4:8) type D-2 using 40 mm graded stone agg as in fdn filling mass concrete,complete all as specified and as directed.
13	M&L for RCC M-25(Design Mix) ( 20 mm graded agg) as in foundation, base for column , plinth beam etc complete all as specified and directed
14	M&L for RCC M-25(Design Mix) ( 20 mm graded agg) as in column,post etc complete all as specified and directed
15	M&L for RCC M-25(Design Mix) ( 20 mm graded agg) as in roof slab supported on wall, beam, landing, desk slab etc complete all as specified and directed
16	M&L for RCC M-25(Design Mix) (20mm gradded agg) as Lintel/chajja etc complete all as specified and directed
17	M&L for RCC M-25(Design Mix) (20mm gradded agg) as Beams, cantilevers, bressummers, lintels over 1.5m span complete all as specified and directed
18	Use & waste of form work of the side of the concrete foundation, footing, base of column rough finished flat surface,complete all as specified and as directed.
19	Use & waste of form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick ( Horizontal or sloping),complete all as specified and as directed.
20	Use & waste of form work to the side of the column , rough finished flat surface area,complete all as specified and as directed.
21	Use & waste of formwork to side and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, verhangs etc also plays between floors and beams etc,complete all as specified and as directed.
22	Use & waste of formwork to edge of concrete flats, breks in flooors, openings in concrete walls , floors and roofs and sides of RCC/PCC bands in walls, horizontal or loppin and similar work all exceeding 20 cm wide(Where RCC/PCC band in walls spanning and opening ,
23	S&F 10mm dia and over TMT bars as in reinforcement cut to length bent to shape etc as required incl binding with MS wire annealed not less than 0.90 m dia,complete all as specified and as directed.
24	All as per Item No 23 but 5 mm dia and over upto including 10 m dia in stirrups, spacers and binder etc.
25	M&L brick work using sub class B brick (old size) curved or straight in plan exc 6 mtr mean radius in cm (1:6),complete all as specified and as directed.
26	M&L brick work using sub class ‘B’ bricks (old size) straight or curved on plan to any radius in half brick work built in CM 1:4 ,complete all as specified and as directed.
27	M&L 15 mm thick plastering on other than fair faces of wall surfaces in cm (1:6) complete all as specified and directed
28	M&L 5 mm thick plastering on ceilling concrete surface in cm (1:3) even and smooth w/o using extra cement,complete all as specified and as directed.
29	M&L for rendering 20mm thick in cement mortar 1:4 in two layers of 10mm each using WPC in finishing layer on brick or concrete surfaces finished even & smooth ( WPC for finishing layer will be measured and paid seperately as supply only),complete all as specified and as directed.
30	M&L 15 mm thick screed bed or bedding layer of mortar in CM 1:6 fixing of tiles in floor,complete all as specified and as directed.
31	M&L 10 mm thick rendering in CM 1:4 on brick or concrete surfaces for fixing of tiles in wall,complete all as specified and as directed.
32	Supply only integral water proofing compound,complete all as specified and as directed.
33	M & L for Vitrified Ceramic tiles of dark shade 10 mm thick (square/ rectangular) polished, area of each tiles lot exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match,complete all as specified and as directed.
34	All as item no33 above, but in dado
35	S &F chequered cement concrete coloured tiles (glossy finish) 20cm x 20cm x 25 mm thick set, jointed and pointed in neat cement slurry with grey cement and pigment complete all as specified and directed.
36	Forming Constrution (Dummy) joints 30 mm deep x 10 mm wide, filled with sealing compound grade A,complete all as specified and as directed.
37	M & L for two coats of exterior emulsion antifungus paint over a coat of primer over a coat of 2 mm thick wall care putty to wall including complete including preparation of surface as specified and directed
38	M&L for preparation of new plastered surface of ceilingand applying three coats of white wash,complete all as specified and as directed.
39	M&Lapplying two coats of distemper by smart painting method over a coat of primer over a coat of 2mm thick alayer of wall care puttyon walls,complete all as specified and as directed.
40	S&F MS Hold fast confirming to Fe-290 Gde E-165,complete all as specified and as directed.
41	M&L PCC (1:3:6) type C-1 as in bed block of hold fast using 20 mm stone agg steps etc,complete all as specified and as directed.
42	S & F powder coated Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified
43	S & F powder coated Anodised aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specifiedcomplete all as specified
44	Materials and Labour for mid steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed.
45	S/F 5.50mm thick ordinary quality sheet glass in squares exc 0.5 sqm in each pane fixed in aluminium frame,complete all as specified and as directed.
46	M&L for galvanised mild steel wire cloth of 0.56mm dia and average aparureof 1.4mmand fixed in position,complete all as specified and as directed.
47	Preparation of concrete roof surfaces applying roof treatment as under:-(a)Applying bitumineous primer @ 0.30 litre per Sqm of surface (Shalitex Primer of STP Limited or equivalent as approved by GE (b)Applying coat of hot applied bitumen 85/25 @ 1.20 Kg/Sq m of surfaces (Make : STP Ltd or equivalent as approved by GE)(c)Laying of APP Modified water proofing membrance 3mm thick with non-woven polyster Reinforcement on hot applied bitumen with 100mm over lap at joints by torching on the transverse direction and 75 mm on longitudinal directional all as per manufacturer"s instructions (Make : SUPER THERMOLAY OF STP LTD OR EQUIVALENT IWL/TEXSA) (d) Applying a coat of bituminious aluminium paint @ 0.10 litre/SQM (Super Silver sheild of STP Ltd or equivalent as approved by GE)
48	M&L for 15 mm thick screed bed in cm 1:3 mixed with WPC as per manufactures instruction finished even and smooth over RCC roof slab without using extra cement (WPC shall be measured seperately),complete all as specified and as directed.
49	S&F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor overall length 150mm complete all as specified
50	S & FPre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws,complete all as specified and as directed.
51	S&Fsteel workin tubulartrusses/postsincludingspecialshaped washer etc completeusing ERWor inductionbutweldedtubes conformingto IS- 1161-1979 grade St-240 complete all as specified and directed
52	M & L framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc, n.exc 10Kg each brackets, conforming to 290 Gde-E-165(Brackets over 10 Kg each to be measured under "Structural Steel "complete all as specified and directed.
53	M&L preparation of new steelsurfaces and apply two coats of syntheticenamelled paint over a coat of red oxide primer over 10cm width or girth,complete all as specified and as directed.
54	M & L for point wiring for one light/fan/exhaust/bell point controlled by one way switch. with 1.5 Sq mm (nominal area) PVC insulated and unsheathed single core FRLS copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC concealed conduit and conduit accessories alongwith continuous earth wire 1.5 Sq mm PVC insulated and unsheathed single core FRLS cable 1100 volts grade with stranded copper conductor and connected to common earth dolly, with and including modular metal flush box & cover plate of suitable size complete for housing the modular switches, socket outlets, fan regulators etc. Note:- (i) Rate deemed to be inclusive of cutting chases and making good disturbed surface). (ii) Modular metal flush box & cover plate will be measured and paid under Relevant item.
55	All as per Item No 54 but one socket outlet 5 pin 6 amps on independent board.
56	All as per Item No 54 but one 5 amps socket outlet on same board with other switch.
57	M & L for point wiring with 2.5 Sq mm (nominal area) PVC insulated and unsheathed single core FRLS copper cable 1100 volts grade with multi-stranded copper conductor in and including PVC concealed conduit and conduit accessories alongwith continuous earth wire 2.5 Sq mm PVC insulated and unsheathed single core FRLS cable 1100 volts grade with stranded copper conductor and connected to common earth dolly, with and includingmodular metal flush box & cover plate of suitable size complete for housing the modular socket outlets 6 in 15/16 Amp on independent board. Note:- (i) Rate deemed to be inclusive of cutting chases and making good disturbed surface). (ii) Modular metal flush box & cover plate will be measured and paid under Relevant item.
58	Supply and fix Modular switch one way 6 Amp,complete all as specified and as directed.
59	Supply and fix Modular switch one way 16 Amp,complete all as specified and as directed.
60	Supply and fix modular type electronic fan regulator,complete all as specified and as directed.
61	Supply and fix modular socket outlet 2 in 1, 3 pin 6 A,complete all as specified and as directed.
62	Supply and fix Modular socket outlet 16 Amps,complete all as specified and as directed.
63	Material and labour for ceiling rose polycarbonate isolated body 3 ways terminals,complete all as specified and as directed.
64	Supply and fixing modular metal flush box 2 modules complete all as specified and as directed.
65	Supply and fixing modular metal flush box 3 modules complete all as specified and as directed.
66	Supply and fixing modular metal flush box 8 modules complete all as specified and as directed.
67	Supply and fixing modular metal flush box 12 modules complete all as specified and as directed.
68	Supply and fixing modular white cover plate with frame 2 modules complete all as specified and as directed.
69	Supply and fixing modular white cover plate with frame 3 modules complete all as specified and as directed.
70	Supply and fixing modular white cover plate with frame 8 modules complete all as specified and as directed.
71	Supply and fixing modular white cover plate with frame 12 modules complete all as specified and as directed.
72	Supply and fixing LED fitting 20 watts high efficiency enviormental friendly long lifemounting on PVC round/square PVC block and making all connection using three core PVC insulated copper conductor muilti strandard flexible cable drawn through in PVC flexible conduit pipe from fitting to ceiling rose complete all as specified and directed.Make :- Havells cat No. LHEXACP7INIW20 or equivalent makein Bajaj/Surya/Phillips/CG
73	Supply and fix sheet metal enclosures SPN DB"s 8 way when MCBs to be used 240 Volts, double door all as specified and directed. Make :- HPL, Model No. MDBDD08 or equiavlent make in L&T /Havells/Legrand/Indo Asian
74	Supply and fixing 6-32 amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB SPN) of single pole and neutral and current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.
75	Supply and fixing 6-32 amp rating 240V, 10KA "C" curve miniature circuit breaker (MCB SP) of single poles and current carrying capacity in the MCB DB complete with connection testing and commissioning all as specified and directed.
76	Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed. Make: usha model No. 1200 mm techoair BLDC 5 Star or equivalent make in Crampton/Havells/Orient/Bajaj.
77	Supply and fix Exhaustfan 300 mm(min) sweep MS CRCA bodyand metal blades with double ball bearing metal protective bird guard , AC single phase, including electrical connection with twisted three core PVC insulated flexible cord of size 0.75 Sqmm copper conductor from celing rose complete all as specified and as directed. Make: Model-Aeroclean plus DBB GBD of Usha or equivalent make of Havells/Crampton/Bajaj
78	M&L for Brick Sub Class "B" locally available best quality laid in trenches with width equal to length of the bricks, above sand cushioning for cable protection completeall as specified and as directed.
79	Supply,laying in repair in trenches of XLPE UG cable insulatedaluminium stranded conductor served with an inner sheathing or PVC tape heavy duty armoured upto 1100volts (earthed) GI steeel strip and overall PVC sheathed nominal cross sectional area 10 sqmm 2 core testing complete all as specified and directed.
80	S&F in replacementsteel water tubing 40 mm dia of bore light grade galvanised with all fittings laid in trenches / fixing with surface of wall after drawn through electric cable by means of nuts bolt and washers all as directed .
81	M & L for earthing complete with GI earth plate electrode 600 x 600 x 6 mm thick buried directly in ground (earth pit not less than 2.25m deep below ground level ) with top edge of the plate not less than 1.5 m below normal ground level , connected to galvanised earth lead iron wire 4mm dia by means of GI bolts nuts and washers of galvanised iron or steel etc all as shown in electrical plate No.3 including earth work PCC pit and RCC pit cover, funnel with watering pipe ,wire mesh ,alternate layer of salt and charcoal, GI protection pipe light grade and testing on completion all as specified and directed by Engr-in-charge.Note 1:-The contract sum shall be arrieved at after deducting amount of schedule of credit from the total quated amount.Note 2-Contractor"s supervisor and main worker would wear shirt/T-shirt of colour sky blue/brown/yellow preferable embosed with contractor"s firm name while carriying out any activities in defence area for better check of security purpose.Note 3:-The tenderer (all eligible contractors) shall ascertain the taxes & levies as on date. The subject tender caters all the taxes & levies as on date including the latest notification of GST issued as on date ( issued by Central Board of Indirect Taxes and Customs)