Manipur University has published Tender For Construction Of Art And Culture (To Be Converted To National Security Studies Center) Mu.. Submission Date for this Tender is 29-12-2022. Civil Work Tenders in Imphal East Manipur. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | (A)Civil Works (Est. Cost = Rs. 1,07,19,711/-) |
| 2 | R.C.C work in suspended floors, roof, landing, shelves and their supports, balconies, lintels, beams, plinth beams, girders, bressumers and cantilevers upto floor two level i/c finishing and plastering the exposed surface with cement mortar 1:3 ( 1 cement : 3 fine sand ) of thickness not exceeding 6 mm to give a smooth and even surface butexcluding the cost of centering, shuttering and reinforcement (a) 1:1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 3 | Applying cement slury in R.C.C slabs or cement concrete work using 2.75 Kg/sqm. for receiving concrete floor i/c roughing, cleaning etc. complete. |
| 4 | R.C.C work in columns, pillars, piers. abutment, posts and struts upto floor two level i/c finishing and plastering the exposed surface with cement mortar 1:3 (1 cement :3 fine sand ) of thickness not exceeding 6 mm to give a smooth and even surface but excluding the cost of centering, shuttering and reinforcementd reinforcement (c) 1;1.5:3 ( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size). |
| 5 | R.C.C work in staircases (i/c landing)spiral staircasesi/c finishing and plastering the exposed surface with cement mortar 1:3 (1 cement :3 fine sand ) of thickness not exceeding 6 mm to give a smooth nosing upto floor two level but excluding the costof centering, shuttering and reinforcementt with 1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size). |
| 6 | Reinforcement for R.C.C work I/c bending, binding and placing in position complete. (a) Tor steel. |
| 7 | Providing formworks i/c centering & shuttering so as to give a rough finish, strutting and propping etc. height of propping and centering below supporting floor to ceiling not exceeding 4 m and removal of the same for in-situ reinforced concrete and plain concrete work in (h)(1) sides and soffits of beams, beam haunchings, cantilevers, girders, bressumers and lintels not exceeding 1 m in depth. |
| 8 | (b) flat surface such as suspended floor, roofs,landings and the like(1) floors etc. upto 200mm in thickness |
| 9 | (g) 1) columns, pillars, posts and struts (square, rectangular or polygonal in plan) |
| 10 | (m) staircases with sloping or stepped, soffits I/c risers and stringers excluding landings |
| 11 | Half brick masonry 2nd class (local first class)in cement mortar 1:3 (1cement : 3 coarse sand) in superstructure. |
| 12 | Providing and fixing aluminium works for doors windows, Ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fiixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up gaps at junctions, at top, bottom and side with required EPDM rubber/Neoprene gasket etc. Aluminium snap beading for glazing /panelling, C.P. brass/ Stainless steel screws, all complete as per architectural drawing and the directions of Engineer-in-charge.(Glazing and panelling to be paid for separately): |
| 13 | i). For shutters of doors, windows & ventilators including, providing and fixing hinges/ pivots and making provision for fixing of fitting wherever required including the cost of EPDM rubber/neoprene gasket required (Fittings shall be paid for separately). 10.66.1. Anodised aluminium (anodised transparent or dyed to required shade according to IS:1868, Minimum anodic coating of grade AC 15) |
| 14 | Providing and fixing M.S Sliding bolts bright finished or/ and black enamelled with nuts and screws etc.complete a) 250 x16mm |
| 15 | Providing and fixing M.S. Tower bolts (barrel type) with screws etc. complete |
| 16 | (a) 250 X 10 mm |
| 17 | (c) 150 X 10 mm |
| 18 | Providing & fixing M.S. handles with necessary screws screws etc.complete. |
| 19 | (a) 125 mm |
| 20 | (b) 100 mm |
| 21 | P/F 40mm. flat iron hold fast 10cm long I/c fixing to framed with 10 mm dia .bolt nuts and windows plugs and enamelled in c.c. block 30x10x15mm. (i)1:3:6 (1cement:3 coarse sand:6 graded stone aggrt.20mm nominal size) |
| 22 | Sub-Head:-Finishing |
| 23 | 12 mm thick plaster 1:4( 1 cement : 4 fine sand ). |
| 24 | Applying one coat of cement primer of approved quality on wall surface. |
| 25 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete. |
| 26 | Distempering (two or more coats) with oil bound washable coat to give an even shsde |
| 27 | Finishing walls weather shield paint of approved quality on new work(three or more coats) to give even shade. |
| 28 | White glazed tiles 10 mm in flooring, treads or steps & landing laid on a bed of 12 mm thick cement mortar 1:3 (1 cement:3 coarse sand) finished with flush pointing in white cement. |
| 29 | White glazed tiles 10 mm thick in skirting risers of steps & dado on 10 mm thick cement plaster 1:3 (1 cement:3 coarse sand) & jointed with white cement slurry. 20x30 cm size |
| 30 | Marble stone slab flooring over 20 mm (average) thick base of cement mortar 1 : 6 (1 cement: 6 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete with |
| 31 | Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame all round headed bolts and nuts or by screws. b) Ornamental grill |
| 32 | Providing and fixing on wall face G.I. Rain water pipe and filling the joints with spun yarn soaked in neat cement slurry and cement mortar 1:2 (1 cem : 2 fine sand). c) 150 mm diameter. |
| 33 | P/F 75mm to 60mm moulded hand rails in straightlengths complete in Uningthou wood |
| 34 | P/F 75mm to 60mm Uningthou caps turned to matchthe hand rails and mitred in I/c hand rails screws and dowels( die of caps to be twicedthe width of the rails 75mm x 60 mm) |
| 35 | P/F 25mm x 25mm Uningthou wood balusters 25mm x 25mm square, wrought fixed with ends housed ( square or sply) to hand rail and treads or string complete. |
| 36 | Sub-Head :-Roofing work |
| 37 | Steel work in built up tubular trusses including cutting, hoisting, fixing in position and applying a coat of approved steel primer red oxide zinc chrome primer conforming to IS: 2074 1979) welded and bolted including special shape washer complete.a) Electric Resistant Welded tube (Conforming to IS:1611-1979)- CHS-65mm dia with 3.2mm thick- 5.21 Kg/m |
| 38 | Trapzoidal Pre-painted Profile Sheet roofing of approved brand DYNA Roof or equivalent with selt drilling screws of 68 mm long Xylon coated screws with PVC washer & caps complete, exclding the coat of purlinsr & trusses. Pre painted Galvanized Iron Sheet (PPGL)iv) Profile sheet 0.60 mm/5.5 kgs/sqm. Pre painted Galvanized Iron Sheet (PPGL) |
| 39 | Trapzoidal Pre-painted Profile Sheet for RidgesGutter or Valley 610 mm wide of approved brand DYNA Roof or equivalent fixed with selt drilling screws of 68 mm long Xylon coated screws with PVC washer & caps completed, exclding the coat of purlins rafter & trusses. iv) Profile sheet 0.60 mm/5.5 kgs/sqm |
| 40 | Providing & fixing false ceiling at all height including providing & fixing of framework made of special section, power pressed from M.S. sheets and galvanised with zinc coating of 120 gms/ sqm (both side inclusive) as per IS : 277 and consisting of angle cleat of size 25mm wide x 1.6mm thick with flanges of 27mm and 37mm, at 1200mm c/c, one flange fixed to the ceiling with dash fastener 20mm dia x 30mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25 x10 x0.50mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I channels 45 x15 x 0.90mm running at the spacing of 1200 mm c/c, to which the ceiling section 0.5mm thick bottom wedge of 80mm with tapered flanges of 26 mm each having lips of 10.5mm, at 450mm c/c, shall be fixed in a direction perpendicular to G.I intermediate channel with connecting clip made out of 2.64mm dia x 230mm long G.I wire at every junction, including fixing perimeter channels 0.50mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall/ partitions with the help of Rawl plugs at 450mm center, with 25mm long dry wall screws @ 230mm interval, including fixing of Calcium Silicate (Gypsum) Board to ceiling section and perimeter channels with the help of dry wall screws of size 3.5 x25mm at 230mm c/c, including jointing & finishing to a flush finish of tapered and square edges of the board with recommended jointing compounds, jointing tapes, finishing with jointing compounds in three layers covering up to 150mm on both sides of joints and two coats of primer suitable for boards, all as per manufacture"s specification and also including the cost of making opening for light fittings, grills, diffusers, cut outs made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in charge but excluding the cost of painting with: |
| 41 | ii) Fully Perforated Gypsum Plaster Board of size 1200 x 2400x12.5 mm having approx. 15 % perforated area with perforation size and pattern as approved by the Engineer-in-charge. |
| 42 | SH : Sanitary & Water Supply |
| 43 | Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level white vitreous china flushing cistern & C.P. flush bend with fittings & C.l.brackets, 40 mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required: a). W.C. pan with ISI marked white solid plastic seat and lid. |
| 44 | Providing and fixing wash basin with C.I. brackets, 15mm C.P. brass taps,32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever required: a). White Vitreous China Wash basin size 630x450 mm with a pair of 15mm C.P. brass pillar taps. |
| 45 | Providing and fixing telephonic shower rose with one meter flexible tube, Dimple/Round/Fancy. |
| 46 | Providing and fixing C.P. brass chain and rubber plug or sink or wash basin. |
| 47 | Providing and fixing lead connection pipe with brass unions. 20 mm diameter |
| 48 | Providing & fixing 100 mm H.C.I. Soil waste & vent pipes. |
| 49 | Providing & Fixing 610 X 450 mm. Bevalled edge mirror of Indian make Superior glass ( of approved quality) quality complete with Asbestos sheet ground, fixed to wooden cleat with C.P. brass screws and washers. |
| 50 | P/F 600X20mm sona C.P. brass towel rails complete with C.P. brass brackets fixed to wooden cleats with C.P. brass screws( Hook type) |
| 51 | P/F Soap container of glass with c.p. lid and brackets fixed to wooden cleat with c.p. brass screws. |
| 52 | Providing and fixing UPVC soil, waste, rain water and vent pipes including all requisite fittings, jointing of pipes & fittings with solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer-in-charge. 160mm dia |
| 53 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work-Exposed on wall. a). 50 mm nominal outer dia pipes |
| 54 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work-Exposed on wall. a). 50 mm nominal outer dia pipes |
| 55 | i). 15 mm nominal outer dia Pipes |
| 56 | ii). 20 mm nominal outer dia Pipes |
| 57 | iii). 25 mm nominal outer dia Pipes |
| 58 | Providing and fixing grating of approved quality for Nahni trap. 125mm nominal diameter with 25mm waste hote |
| 59 | Providing and fixing PVC traps with 100 mm inlet and 100mm outlet of self cleaning design with screwed down of hinged grating with or without vent arm complete i/c cost of cutting and making good the walls and floors. |
| 60 | Providing and fixing 100 mm HCI heel rest bend. |
| 61 | Providing and fixing 100 mm HCI past over pipe. |
| 62 | Providing and fixing 100x100x100x100 mm HCI branch of the required degree with access doors, insertion rubber washer 3 mm thick bolts and nuts complete. |
| 63 | Providing and fixing C.P. bib cock of superior quality. 20 mm diameter (Delux Sona) |
| 64 | Providing and fixing brass stop cock of approved quality. 25 mm diameter |
| 65 | G.I. sheet gutters 24 B.G. semi-circular 150 mm width 450 mm over all 1/c fixed with clamps & making connection with rain water pipes complete. |
| 66 | Providing & fixing on wall face G.I. rain water pipe i/c filling the joints with spun yarn soaked in neat cement slurry & cement mortar 1: 2 (1 cement: 2 fine sand b).150 mm diameter. |
| 67 | Providing & fixing M.S. holder bat clamps embedded in & i/c cement concrete blocks 112.5 mm X 112.5 mm of 1:2:4 mix (1 cement:2 coarse sand:4 hard stone ballast 20 mm & down gauge). |
| 68 | SH : Site development |
| 69 | Providing and laying 60 mm thick factory made cement concrete interlocking paver block (Rubber Moulded) of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design / shape laid in required colour and pattern over and including 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand etc. all complete as per the direction of the Engineer-in-charge. |
| 70 | Providing plinth protection with bricks 3rd class (local mixed class) in cement mortar 1:6 (1 cement: 6 fine sand) i/c pointing top surface of bricks with cement mortar 1:2 (1 cement:2 sand). |
| 71 | (B). Elect. Works (Est. Cost = Rs. 11, 09, 322/-) |
| 72 | Sub-Head No. I (Wiring) |
| 73 | Wiring for light point / Fan point / Exhaust Fan point / Call bell point with 1.5 mm2 FR PVC insutated copper conductor single core cable in PVCcasing & capping with modular type switch, modular plate suitable size,G.I-box and earthing the point with 1.5 mm2 FR PVC insulated copper conductor single core cable etc. as reqd. |
| 74 | a) Light Point(Group-B) |
| 75 | b) Ceiling Fan Point(Group-B) |
| 76 | c) Exhaust Fan Point(Group-B) |
| 77 | Wiring for light point / Power Plug point with 2 x 4mm2 FR PVC insutated copper conductor single core cable inPVC casing & capping along with 1 no. 4 mm2 FR PVC insulated copper conductor single core cable for loop earthingetc. as reqd. |
| 78 | Wiring for circuit / Sub - main wiring along with wire with ( the following size of ) PVC insulated copper conductor single core cable in PVC cassing & capping etc. as reqd. |
| 79 | a. 2 x 1.5 mm2 + 1 x 1.5 mm2 earth wire |
| 80 | b. 2 x 2.5 mm2 + 1 x 2.5 mm2 earth wire |
| 81 | c. 2 x 4 mm2 + 1 x 4 mm2 earth wire |
| 82 | d. 2 x 10 mm2 + 1 x 10 mm2 earth wire |
| 83 | Sub-Head No. II (Fitting & Switch Gear) |
| 84 | Providing and Fixings ( following capacity TP & N ) dis-connector fuse switch unit inside the existing cubical panel board with ISI marks HRC fuses including drilling holes in the cubical panel board, making connection as reqd. |
| 85 | a. 100amp. TP & N |
| 86 | b. 320 amp. TP & N |
| 87 | S/F Bus bar chamber with 4 strips bus bar of length 300 mm suitable for 100 amp capacity complete with all accessories i/c connection, earthing the body etc. as reqd. |
| 88 | S/F Bus bar chamber with 4 strips bus bar of length 300 mm suitable for 200 amp capacity complete with all accessories i/c connection, earthing the body etc. as reqd. |
| 89 | S/F wall mounted metal board of welded contruction with minimum 35 mm x 35 mm x 6mm angle iron frame work with 25 mm x 6 mm flat iron as intermidiate members i/c painting etc. as reqd. |
| 90 | S/F (following way), single / double pole and neutral, sheet steel MCB distribution board, 240 V on surface / recessed complete with tinned copper bus bar neutral bus bar, earth bar, din bar, detachable gland plate, interconnection, phosphatized and powder painted including earthing etc. as reqd. ( but without MCB / RCCB / Isolator) |
| 91 | b). 8 way double door |
| 92 | S/F ( following rating) double pole 240 V isolator in the existing MCB DB complete with connection, testing and commissioning as reqd. a).63 amp |
| 93 | Supplying and fixing 5 amp to 32 amp rating 230 V "B" series MCB for lighting and other load of (following poles) in the existing MCB DB complete with connection, testing and commissioning etc. as reqd. a). Single Pole |
| 94 | S/F 56 " sweep (1400 mm) A.C ceiling fan complete with down rod, canopy, 3 (three ) blades but without regulator etc. as reqd. ( Make Bajaj / Usha or similar) a). Single Pole |
| 95 | Supplying & Fixing stepped type electronic Fan Regulator on the existing modular plate switch box i/c connection but excluding modular plate etc. as reqd. |
| 96 | S/F 380 mm sweep exhaust fan complete with all accessories i/c connection etc. as reqd. |
| 97 | S/F 280 mm dia ceiling fitting with 11 W CFL lamp complete with carrier and back plate i/c connection etc. As reqd. |
| 98 | S/F suitable size G.I box with modular plate and cover in front on surface or in recess i/c P/F 3 pin 5/6 amp modular socket 5/6 amp modular switch, connection painting etc. as reqd. ( for light plug to use in non - residential building ) |
| 99 | S/F suitable size G.I box with modular plate and cover in front on surface or in recess i/c P/F 6 pin 15/16 amp modular socketout let and 15/16 amp modular switch, connection painting etc. as reqd. ( for light plug to use in non - residential building) |
| 100 | S/F 3 pin 5 amp ceiling rose on the existing junction box / wooden block i/c connection etc. as reqd. |
| 101 | S/F Brass Batten / Angle holder i/c connection etc. as reqd. |
| 102 | S/F ( followingsize / modules) G.I Box along with modular base and cover plate for modular switchas reqd. a). 12 module ( 200 mm x 150 mm ) |
| 103 | Sub-Head No. III ( Main Service Line& Earthing ) |
| 104 | 8 m long Steel tubular pole (410 SP-14) |
| 105 | Eraction of steel tubular pole of length not less than 8 mtrs but not exceeding 10 mtrs. In cement concrete 1:3:6 (1 cement :3 coras sand:6 graded stone agtt. 40 mm nomial size) foundation i/c excavation & re- filling etc as reqd. |
| 106 | A.A.C Gnat (7/2.21mm) |
| 107 | M.S cross arms (75x40)mm,1110 in long |
| 108 | Back clamp for cross arm |
| 109 | L.T pin insulator with pin |
| 110 | Stay set complete with stay wire insulator clamps etc. |
| 111 | 120 mm24 core PVC/XLPE insulated heavy duty armoured cable 1.1 Kv grade |
| 112 | Earthing with copper plate 600 mm x 600 mm x 6 mm thick i/c accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) as reqd. |
| 113 | Extra for using salt and charcoal for G.I or copper plate earth electrode as reqd. |
| 114 | P/F 25 mm x 5 mm copper strip in 40 mm dia G.I pipe from earth electrode as reqd. |
| 115 | P/F 4 mm dia copper wire on surface or in recessed for loop earthing as reqd. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
