Tender For Turnkey Work For Setting Up Of Amrit Pharmacy At All India Institute Of Medical Sciences (Aiims), Rishikesh, Uttarakhand, srinagar-Jammu And Kashmir

Tender For Turnkey Work For Setting Up Of Amrit Pharmacy At All India Institute Of Medical Sciences ( Aiims ) , Rishikesh, Uttarakhand -Clearing Jungle Including Uprooting Of Rank Vegetation, Grass, Brush Wood, Trees And Saplings Of Girth Up To 30 Cm Measured At A Height Of 1 M Above Ground Level And Removal Of Rubbish Up To A Distance Of 50 M Outside The Periphery Of The Area Cleared. 3 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means In Foundation Trenches Or Drains ( Not Exceeding 1.5 M In Width Or 10 Sqm On Plan ) , Including Dressing Of Sides And Ramming Of Bottoms, Lift Upto 1.5 M, Including Getting Out The Excavated Soil And Disposal Of Surplus Excavated Soil As Directed, Within A Lead Of 50 M. All Kinds Of Soil. 4 Providing And Laying In Position Cement Concrete Of Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level : 1:5:10 ( 1 Cement : 5 Fine Sand : 10 Graded Stone Aggregate 40 Mm Nominal Size ) . 5 Random Rubble Masonry With Hard Stone In Foundation And Plinth Including Levelling Up With Cement Concrete 1:6:12 ( 1 Cement : 6 Coarse Sand : 12 Graded Stone Aggregate 20 Mm Nominal Size ) Upto Plinth Level With :Cement Mortar 1:6 ( 1 Cement : 6 Coarse Sand ) 6 Fillingearth ( Excluding Rock ) In Trenches, Plinth, Sides Of Foundations Etc. In Layers Not Exceeding 20Cm In Depth, Consolidating Each Deposited Layer By Ramming And Watering, Lead Up To 50 M And Lift Upto 1.5 M. 7 Diluting And Injecting Chemical Emulsion For Post-Constructional Anti-Termite Treatment ( Excluding The Cost Of Chemical Emulsion ) Along The External Wall Below Concrete Or Masonry Apron Using Chemical Emulsion @ 2.25 Litres Per Linear Metre Including Drilling And Plugging Holes Etc.:With Chlorpyriphos / Lindane E.C. 20% With 1% Concentration 8 Supplying Chemical Emulsion In Sealed Containers Including Delivery As Specified.Chlorpyriphos / Lindane Emulsifiable Concentrate Of 20% 9 Providing And Layingreinforced Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand ( Zone Iii ) : 4 Graded Stone Aggregate 20 Mm Nominal Size ) As Damp-Proof Course Of 150 Mm Thickincluding The Cost Of Centering, Shuttering, Finishing , Reinforcement And Mixing Water Proofing Material In Cement Concrete Work Etc Complete. 10 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Foundation And Plinth In:Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) 11 Brick Work With Common Burnt Clay F.P.S. ( Non Modular ) Bricks Of Class Designation 7.5 In Superstructure Above Plinth Level Up To Floor V Level In All Shapes And Sizes In : Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) 12 Reinforced Cement Concrete Work In Beams, Suspended Floors, Roofs, Having Slope Up To 150 Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Window Sills, Staircases And Spiral Stair Cases Up To Floor Five Level Excluding The Cost Of Centering, Shuttering, Finishing And Reinforcement, With1:1.5:3 ( 1 Cement : 1.5 Coarse Sand ( Zone Iii ) : 3 Graded Stone Aggregate 20 Mm Nominal Size ) . 13 Steel Reinforcement For R.C.C Work Including Straightening, Cutting, Bending, Placing In Position And Binding All Complete Upto Plinth And Floor V Level.Thermo - Mechanically Treated Bars Of Grade Fe-500D Or More 14 Centering And Shuttering Including Strutting, Propping Etc. And Removal Of Form For All Heights :Lintels, Beams, Plinth Beams, Girders, Bressumers And Cantilevers 15 Making Plinth Protection 50Mm Thick Of Cement Concrete 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) Over 75Mm Thick Bed Of Dry Brick Ballast 40 Mm Nominal Size, Well Rammed And Consolidated And Grouted With Fine Sand, Including Necessary Excavation, Levelling & Dressing & Finishing The Top Smooth. 16 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix :1:6 ( 1 Cement: 6 Fine Sand ) 17 12 Mm Cement Plaster Of Mix:1:4 ( 1 Cement : 4 Fine Sand ) 18 Finishing Walls With Premium Acrylic Smooth Exterior Paint With Silicone Additives Of Required Shade:New Work ( Two Or More Coats Applied @ 1.43 Ltr / 10 Sqm Over And Including Priming Coat Of Exterior Primer Applied @ 2.20 Kg / 10 Sqm ) 19 Applying One Coat Of Water Thinnable Cement Primer Of Approved Brand And Manufacture On Wall Surface: Water Thinnable Cement Primer 20 Providing And Applying Plaster Of Paris Putty Of 2 Mm Thickness Over Plastered Surface To Prepare The Surface Even And Smooth Complete. 21 Wall Painting With Premium Acrylic Emulsion Paint Of Interior Grade, Having Voc ( Volatile Including Applying Additional Coats Wherever Required To Achieve Even Shade And Colour. Two Coats 22 Providing And Fixing 12 Mm Thick Frameless Toughened Glass Door Shutter Of Approved Brand And Manufacture, Including Providing And Fixing Top & Bottom Pivot & Double Action Hydraulic Floor Spring Type Fixing Arrangement And Making Necessary Holes Etc. For Fixing Required Door Fittings, All Complete As Per Direction Of Engineer-Incharge ( Door Handle, Lock And Stopper Etc.To Be Paid Separately ) . 23 Providing And Fixing 12 Mm Thick Frameless Toughened Glass Partition Of Approved Brand And Manufacture, Including Top & Bottom Fixing Arrangement Counter Opening And Making Necessary Holes Etc. For Fixing Required Fittings, All Complete As Per Direction Of Engineer-In-Charge 24 Providing And Fixing Of Single Glass Door Ss Patch Lock With Out Handle In Toughened Glass Door Including All Necessary Screws Etc. Complete. 25 Providing And Fixing Ss H Handle Having Min 450 Mm Length In Toughed Glass Door Including All Necessary Screws Etc. Complete. 26 Providing And Fixing Isi Marked Flush Door Shutters Conforming To Is : 2202 ( Part I ) Decorative Type, Core Of Block Board Construction With Frame Of 1St Class Hard Wood And Well Matched Teak 3 Ply Veneering With Vertical Grains Or Cross Bands And Face Veneers On Both Faces Of Shutters.30 Mm Thick Including Isi Marked Stainless Steel Butt Hinges With Necessary Screws 27 Providing And Fixing Stainless Steel Fancy Handle Of Approved Make Fixed With Ss Screws Etc. Complete As Per Direction Of Engineer-In-Charge. 200 Mm 28 Providing And Fixing Aluminium Sliding Door Bolts, Isi Marked Anodised ( Anodic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) , Transparent Or Dyed To Required Colour Or Shade, With Nuts And Screws Etc. Complete :300X16 Mm 29 Providing And Laying Vitrified Floor / Wall Tiles In Different Sizes ( Thickness To Be Specified By The Manufacturer ) Including Skirting With Water Absorption Less Than 0.08% And Conforming To Is : 15622, Of Approved Make, In All Colours And Shades, Laid On 20Mm Thick Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Including Grouting The Joints With White Cement And Matching Pigments Etc., Complete:Size Of Tile 600X600 Mm 30 Providing And Fixing 18 Mm Thick Gang Saw Cut, Mirror Polished, Premoulded And Prepolished, Machine Cut For Kitchen Platforms, Vanity Counters, Window Sills, Facias And Similar Locations Of Required Size, Approved Shade, Colour And Texture Laid Over 20 Mm Thick Base Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) , Joints Treated With White Cement, Mixed With Matching Pigment, Epoxy Touch Ups, Including Rubbing, Curing, Moulding And Polishing To Edges To Give High Gloss Finish Etc. Complete At All Levels. Granite Stone Slab Colour Black, Cherry / Ruby Redarea Of Slab Upto 0.50 Sqm 31 Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubesetc. ) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, And Two Or More Coats Of Enamel Paint Including Welding And Bolted With Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes 32 Providing And Fixing Mild Steel Round Holding Down Bolts With Nuts And Washer Plates Complete. 33 Providing And Fixing Precoated Galvanised Iron Profile Sheets ( Size, Shape And Pitch Of Corrugation As Approved By Engineer-In-Charge ) 0.50 Mm ( +.05 % ) Total Coated Thickness With Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steelrade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet And Polyester Top Coat 15-18 Microns. Sheet Should Have Protective Guard Film Of 25 Microns Minimum To Avoid Scratches During Transportation And Should Be Supplied In Single Length Upto 12 Metre Or As Desired By Engineerin-Charge. The Sheet Shall Be Fixed Using Self Drilling / Self Tapping Screws Of Size ( 5.5X 55 Mm ) With Epdm Seal, Complete Upto Any Pitch In Horizontal / Vertical Or Curved Surfaces, Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required. 34 Providing And Fixing Precoated Galvanised Steel Sheet Roofing Accessories 0.50 Mm ( + 0.05 % ) Total Coated Thickness, Zinc Coating 120 Grams Per Sqm As Per Is: 277, In 240 Mpa Steel Grade, 5-7 Microns Epoxy Primer On Both Side Of The Sheet Andolyester Top Coat 15-18 Microns Using Self Drilling / Self Tapping Screws Complete 35 Ridges Plain ( 500 - 600Mm ) 36 Gutter ( 600 Mm Over All Girth ) 37 Providing And Fixing Tiled False Ceiling Of Approved Materials Of Size 595X595 Mm In True Horizontal Level, Suspended On Inter Locking Metal Grid Of Hot Dipped Galvanized Steel Sections ( Galvanized @ 120 Grams / Sqm, Both Side Inclusive ) Consisting Of Main “T” Runner With Suitably Spaced Joints To Get Required Length And Of Size 24X38 Mm Made From 0.30 Mm Thick ( Minimum ) Sheet, Spaced At 1200 Mm Center To Center And Cross “T” Of Size 24X25 Mm Made Of 0.30 Mm Thick ( Minimum ) Sheet, 1200 Mm Long Spaced Between Main “T” At 600 Mm Center To Center To Form A Grid Of 1200X600 Mm And Secondary Cross “T” Of Length 600 Mm And Size 24X25 Mm Made Of 0.30 Mm Thick ( Minimum ) Sheet To Be Interlocked At Middle Of 38 The 1200X600 Mm Panel To Form Grids Of 600X600 Mm And Wall Angle Of Size 24X24x0.3 Mm And Laying False Ceiling Tiles Of Approved Texture In The Grid Including, Required Cutting / Making, Opening For Services Like Diffusers, Grills, Light Fittings, Fixtures, Smoke Detectors Etc. Main “T” Runners To Be Suspended From Ceiling Using Gi Slotted Cleats Of Size 27 X 37 X 25 X1.6 Mm Fixed To Ceiling With 12.5 Mm Dia And 50 Mm Long Dash Fasteners, 4Mm Gi Adjustable Rods With Galvanised Butterfly Level Clips Of Size 85 X 30 X 0.8 Mm Spaced At 1200 Mm Center To Center Along Main T, Bottomexposed Width Of 24 Mm Of All T-Sections Shall Be Pre-Painted With Polyester Paint, All Complete For All Heights As Per Specifications, Drawings And Asdirected By Engineer-In-Charge.12.5 Mm Thick Square Edge Pvc Laminated Gypsum Tile Of Size 595X595 Mm, Made Of Gypsum Plasterboard, Manufactured From Natural Gypsum As Per Is 2095 Part I And Laminated With White 0.16Mm Thick Fire Retardant Pvc Film On The Face Side And 12Micron Metalized Polyester On The Back Side With All Edges Sealed With The Face Side Pvc Film Which Goes Around And Wraps The Edges And Is Bonded To The Edges And The Back Side Metalized Polyester Film So As To Make The Tile A Completely Sealed Unit. 39 Supplying And Fixing Rolling Shutters Of Approved Make, Made Of Required Size M.S. Laths, Interlocked Together Through Their Entire Length And Jointed Together At The End By End Locks, Mounted On Specially Designed Pipe Shaft With Brackets, Side Guides And Arrangements For Inside And Outside Locking With Push And Pull Operation Complete, Including The Cost Of Providing And Fixing Necessary 27.5 Cm Long Wire Springs Manufactured From High Tensile Steel Wire Of Adequate Strength Conforming To Is: 4454 - Part 1 And M.S. Top Cover Of Required Thickness For Rolling Shutters.80X1.25 Mm M.S. Laths With 1.25 Mm Thick Top Cover 40 Providing And Fixing Ball Bearing For Rolling Shutters. 41 Extra For Providing Mechanical Device Chain And Crank Operation For Operating Rolling Shutters Exceeding 10.00 Sqm And Upto 16.80 Sqm In The Area 42 Extra For Providing Mechanical Device Chain And Crank Operation For Operating Rolling Shutters. Exceeding 16.80 Sqm In Area 43 Supplying And Plantation Of Large Shrubs And Hedge Plant ( Heliconiya St. Vincent Red, Ixora Bush, Cana Durf , Afflorance Hedge Plant, Etc.. ) Or Suitable Outdoor Ornamental Plant In Terracotta / Earthern Pot Of Minimum Height 450 Mm Including Preparation Of Beds Filling The Earth After Breaking Clods And Mixing With Sludge Or Manure In The Ratio Of 8:1, Flooding With Water, Filling With Earth If Necessary, Watering And Finally Fine Dressing, Leveling Etc Complete. 44 Furniture Works 45 Double Level Counter:Providing And Fixing Double Level Counter, First Step At 750 Mm From Ground, 900Mm Wide And Counter Top At 1100 Mm Level And 300 Mm Wide. 12Mm Thick Acrylic Sheet ( Pure White In Colour ) To Be Used For Counter Top On 25 Mm Thick Prelaminated Commercial Ply. Display Unit With 8Mm Thick Toughened Glass Fascia And 18Mm Thick Prelaminated Shelves To Be In Built In Counter With Movable Shutter. Counter Should Contain Retractable Keyboard Trays And Partitioned Drawers With Drawer Channel, Cupboard Units With Swing Door And Auto Close Hinges. Drawers And Cupboard Are To Be Fixed With Individual Locks And Handles. Cable Manager And Leg Space Are Also To Be Provided.150Mm High Ss Glossy Skirting All Complete As Per The Design And Instructions Of Engineer In Charge. 12Mm Thick Toughened Glass Partition To Be Provided Above Counter Up-To Roof Height With Necessary Counter Opening. Note: Only Front Elevation Of Wooden Counter Will Be Measured. ( 12Mm Thick Toughened Glass Will Be Paid Separately ) . Make Laminate: Greenlam, Marino Or Equivalent. 46 Table: Supply And Installation Of Working Table 900Mm Length X600mm Depth X750mm Height Made With 18Mm Thick Prelaminated Particle Board With One Side Decorative And Other Side Balancing Lamination And All Edges To Be Fixed With Matching Pvc Edge Beeding. Partitioned Storage Unit Having Swing Door , Partitioned Cash Drawer, Key Board Drawer And Leg Spaceare Also To Be Provided With Individual Locks And Handles, Autoclose Hinges, Drawer Channels Etc. Complete As Per The Aproved Design Andinstructions Of Engineer In Charge. 47 Chair: Medium Back Ergonomic Chair With Five Nos. Star Shaped Nylon Base. Castors: 50Mm Diameter Nylon Twin Wheel, Gas Lift Height Adjustment, Back Angle Adjustment And Backrest Height Adjustment. Fixed Armrest Providing Natural Resting For Arms. Seat With Pu Cutted Foam Backed Fabric, Back Rest With Mesh Type Fabric. Upholstery: Heavy Duty Rubber Backed Fabric In Black. 48 Counter Height Stools :Supply And Installation At Site Counter Height Stools Of Following Specifications :Revolving Adjustable Chrome Plated Steel Body Chairs With Resistance To The Corrosion.Cushion Seat With Lift Mechanism For Adjustment Of Height. Minimum Height 750Mm Before Expansion. Medium Back Rest And Arm Rest. Item Shall Be Of Reputed Make. 49 Medicine Display Shelf: Open Wooden Display Laminated Cabinets Made Up Of Pre-Laminated Mdf Board, Exterior Grade-I 18 Mm Thick Confirming To Is:14587 With Decorative Lamination On One Side And Other Side Balancing Lamination With Proper Provision Of Racks And Shelves.Under Storage Unit Of 600Mm Deep Storage Shall Be 750Mm From The Ground With Wooden Shelves And Door To Be Provided With Hinges, Lock, Concealed Handle, Etc Complete. Display Wooden Shelves @150Mm C / C Provided With 450 Mm Deep And 1350 Mm Height From The Upper Storage Unit And To Be To Be Fixed Between Laminated Vertical 18Mm Mdf Board In Back Side And Two Edges And Above The Display Unit An Upper Storage Of 300 Mm Height With Shutters, Lock And Concealed Handles To Be Provided. All The Edges To Be Finished With Edge Band And Shelves To Be Fix With Proper Bracket Holders Complete As Per Approved Layout. Note: Only Front Elevation Will Be Measured. 50 Stainless Steel 2 Door 4 Glass Office Almirah 400Width X 900 Length X 2000 Height Of Make Godrej Of Minimum 1Mm Thick, Approved Colour And Standard Specification As Per Direction Of Engineer In Charge 51 Supply And Erection Of High Quality Retractable Queue Manager, Ideal For Indoor And Outside Use And Suitable For Crowd Control Purposes Such As Events Queues And Can Easily Be Unhooked. Each Cement And Rubber Base Having Minimum Weighs 6.3 Kg Should Have Stronger Ability Against The Wind Than Ordinary Bases, Rust Free And Even Strength With Frictionless Floor Protection. 202 Grade Extendable 2.25 M Hook Type Stanchions Barrier Accessories Steel Barricade, Que Manager – Red, Having Minimum Height Of 0.9 M, 5.5 Kg Concrete Filled Base For Stable Use Without Toppling. Flat Shape Base Cover And Stainless Steel Polish Finish. Note: Measurement Will Be Made Based On Supply And Erection Of Each Set Of Stanchions ( 2 Nos With Ribbon ) . 52 Electrical Work 53 Wiring For Light Point / Fan Point / Exhaust Fan Point / Call Bell Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit, With Modular Switch, Modular Plate, Suitable Gi Box And Earthing The Point With 1.5 Sq.Mm Frls Pvc Insulated Copper Conductor Single Core Cable Etc. As Required. 54 Wiring For Light / Power Plug With 2X4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable In Surface / Recessed Medium Class Pvc Conduit Alongwith 1 No. 4 Sq. Mm Frls Pvc Insulated Copper Conductor Single Core Cable For Loop Earthing As Required. ( Recommended Material : Polycab, Rr Kabel, V Guard, Havells ) 55 Wiring For Circuit / Submain Wiring Alongwith Earth Wire With The Following Sizes Of Frls Pvc Insulated Copper Conductor, Single Core Cable In Surface / Recessed Medium Class Pvc Conduit As Required. ( Recommended Material : Rr Kabel / National / Ralison / Rkg / Finolex / Polycab / Havells ) 56 2 X1.5 Sq.Mm + 1X 1.5 Sq. Mm Earth Wire 57 2 X 2.5 Sq. Mm + 1 X 2.5 Sq. Mm Earth Wire 58 2 X 6 Sq. Mm + 1 X 6 Sq. Mm Earth Wire Meter 59 S / F Light Plug Point Modular Type Accessaries : Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Fronton Surface Or In Recess, Including Providing And Fixing 3 Pin 5 / 6 Amps Modular Socket Outlet And 5 / 6 Amps Modular Switch, Connection, Painting Etc As Required, 60 S / F Power Plug Point With Modular Type Switch : Supplying And Fixing Suitable Size Gi Box With Modular Plate And Cover In Front On Surface Or In Recess, Including Providing And Fixing 6 Pin 15 / 16 And 15 / 16 Amps Modular Switch, Connection, Painting Etc As Required. 61 S / F 20A Spn Mcb Industrial Socket Outlet : Supplying And Fixing 20 A, 240 V, Spn Industrial Type Socket Outlet, With 2 Pole And Earth, Metal Enclosed Plug Top Alongwith 20 A, “C” Curve, Sp, Mcb, In Sheet Steel Enclosure, On Surface Or In Recess, With Chained Metal Cover For The Socket Out Let And Complete With Connections, Testing And Commissioning Etc. As Required. 62 S / F Modular Boxes, Base & Cover Plate : Supplying And Fixing 1 Or 2 Module ( 75 Mmx75 Mm ) , Gi Box Along With Modular Base, Cover Plate For Modular Switches In Recess Etc As Required. 63 Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. ( But Without Mcb / Rccb / Isolator ) 6 Way , Double Door 64 Supplying And Fixing Following Way, Single Pole And Neutral, Sheet Steel, Mcb Distribution Board, 240 V, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required. ( But Without Mcb / Rccb / Isolator ) 8 Way, Double Door 65 Supplying And Fixing Following Way, Horizontal Type Three Pole And Neutral, Sheet Steel, Mcb Distribution Board, 230 V, On Surface / Recess, Complete With Tinned Copper Bus Bar, Neutral Bus Bar, Earth Bar, Din Bar, Interconnections, Powder Painted Including Earthing Etc. As Required.4 Way ( 4 + 12 ) , Tpn Double Door 66 S / F C Series, Mcb : Supplyingand Fixing5 Amps To 32 Amps Rating, 240 / 415Volts, C Curve, Miniature Circuit Breaker Suitable For Inductive Load Of Following Poles In The Existing Mcb Db Complete With Connections, Testing And Commissioningetc. As Required. 67 Single Pole 68 Single Pole And Neutral 69 Supplying And Fixing Following Rating, Four Pole, 415 V, Isolator In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 63A 70 Supplying And Fixing Following Rating, Four Pole, ( Three Phase And Neutral ) , 415 V, Residual Current Circuit Breaker ( Rccb ) , Having A Sensitivity Current 30 Ma In The Existing Mcb Db Complete With Connections, Testing And Commissioning Etc. As Required. 63A 71 Supplying And Fixing Cable End Box ( Loose Wire Box ) ( Ip 43 ) Suitable For Following Triple Pole And Neutral, Sheet Steel, Mcb Distribution Board, 415 V, On Surface / Recess, Complete With Testing And Commissioning Etc. As Required.For 4 Way, Double Door Tpn Mcbdb 72 Supply, Installation, Testingandcommissioningofthe Following Types Oflight Fittings With All Accessorieson False Ceiling, True Ceiling Or Wall As Directedand Giving Connectionswith 16 / 0.20 Mm 3 Core Pvc Insulated Andsheathedroundcopperconductorflexwireor Extendingthe Original Wiring And Giving Connectionsas Required. All Recessed Type Fixtures Are To Be Supportedindependentlywith Chains Or Gi Wire Anchoredto The Ceiling With Anchoring Bolt Of Necessary Size. All Loose Wires Above The False Ceiling Are To Be Neatly Concealed By Flexible Metal / Pvc Conduits. ( Cost To Include Lamps & All Consumables Also ) 73 Supply And Installtion Of 30-36W, 230V, 4300 Lumen, 400K Recessed Square Led Light Fixture Of Dimession 600Mm X 600Mm On False Cellling Along With All Accessories With Intergrated Driver Thd<10% And Connections As Well As Making Good The Damages As Required At Site Engineer. Recommended Makes: Philips / Havells / Osram / Wipro Or Equivalent. 74 Ledtubelight Of6000k And 15-18W On Wall Or Ceiling As Directedand Giving Connections As Required.All Loose Wires Are To Be Neatly Concealed. ( Make: Philips, Bajaj, Crompton Or Equivalent ) 75 Supply, Installation, Testing And Commissioning Of Wall Mount Fan ( 400Mm Sweep ) , Adjustable Speed. Min 60 Degree Oscillation, Swing, Adjustable Upward And Downward Tilt Mechanism, Protective Guard, Including Connections With 1.5 Sq. Mm Frls Pvc Insulated, Copper Conductor, Single Core Cable, Mounting Accessories, Etc. As Required. It Shall Be Double Ball Bearning Type. ( Make: Usha, Cromption , Havells ) 76 Supply, Installation, Testing & Commissioning Of 3 Phase 4 Wire Electronic Type Energy Meter With Lcd Display With Battery Back Up, Class 1.00 Ct With Inbuilt Ct. The Whole Unit To Be Mounted On Suitable Metal Enclocure ( Powder Coated With Locking Arrangement, Seperate Enclosure For Incoming And Outgoing ) With 3 Nos. Hrc Fuses, Neutral Link And All Connections Complete. 77 Earthing With G.I. Earth Pipe 4.5 Meter Long, 40 Mm Dia Including Accessories, And Providing Masonry Enclosure With Cover Plate Having Locking Arrangement And Watering Pipe Etc. With Charcoal / Coke And Salt As Required. 78 Providing And Fixing 4.00 Mm Dia Copper Wire On Surface Or In Recess For Loop Earthing As Required. 79 Supply And Laying Of Following Size 1.1 Kv Grade Xlpe Insulated, Pvc Sheathed, Armoured Aluminium Conductor Power Cable Conforming To Is 7098 ( Part 1 ) Amended Upto Date. ( Including Termination On Both Ends, Laying As Per Site Condition ) 4C X 25 Sq.Mm 80 Inverter Air Conditioner: Supply, Installation, Testing And Commissioning Of Air Cooled High Wall Mounted Split Air Conditioner Of Following Capacity Consisting Of High Wall Mounted Type Room Unit ( Fan Coil ) With Cordless Remote Control And One Number Outdoor Condensing Unit Comprising Of Enegy Efficient Suitable Rotary Compressorfor Operation On Single Phase, 230 V, 50Hz Supply, Fixing The Outdoor Unit On A Raised Platform As Per Manufacturers Recommendation And Fixing Of Room ( Fan Coil ) Unit On Wall, Standard 4 M Distance Refrigerant Copper Piping With 13Mm Nitrile Rubber Insulation, Providing And Making Interconnection Between Room& Condenser As Per Site Conditions, Comprising Of 1 Dia Drain Pvc Pipe With Insulation 4M, Canvas Connections, Full Electrical Cabling From Power Plug Near Indoor Unit And To Outdoor Unit, Odu Ms Stand, First Charge Refrigarant Gas, Suitable Stabilizer Etc Complete As Required. ( Make : Voltas , Blue Star, Siemens, Hitachi ) :2.0 Tr 3 Star Rated As Per Bee 81 Supplying And Fixing Additional Copper Piping Suitable For 2 Tr Ac In Pvc Casing. 82 Network 83 8 Port Network Switch :Supply And Installation At Site : 10 / 100 Mbps 8-Ports Gigabit Switch . ( Make : D-Link Dgs-1008A ) 84 Providing And Fixing Of Rj-45 Socket Outlet In The Existing Modular Box With Connections And All Required. 85 Supplying, Drawing And Crimping With All Accessories Of Utp 4 Pair Cat 6 Lan Cable In The Existing Surface / Recessed Steel / Pvc Conduit As Required.1 Run Of Cable From Port Switch To Data Socket 86 Supply, Installation And Commissioning Of Powder Coated Dvr 6U Wall Mounted Serverrack Ofiso Standard Of Size 400X 400X 200Mm Having Depth Adjustable Mounting Slots, Top And Bottom Panel With Ventilation And Cable Entry Facility, Provision To Mount The Cooling Fans On The Top Panel, Lock And Key Etc. And Having Capacity To Carry A Max Load Of 60 Kg All Complete As Per The Manufacturer Specifications And Instructions Of Engineer In Charge. 87 Supply, Installation, Testing And Commissioning Of Best Quality Cat-6 Patch Cord Having1 Metre Length Complete As Per Specifications As Required. 88 Supply Of Abc Type Fire Extinguisher Of 2 Kgs. Make Safex / Minimax / Ceasefire Or Equivalent 89 Cctv 90 Supply, Installation, Testing & Commissioning Ofindoor Ir Dome Night Vision Cameras :2.0 Mp, 0.1 Lux, Resolution 720 P , Awb / Blc / Agc, Min 20M Range, Built-In Ir Illumination, White Color Case, Pal-Ce / Fcc Approved.Make: Cp Plus / Hikvision / Honeywell Or Equivalent 91 Supply, Installation, Testing & Commissioning Of Outdoor Ir Bullet Night Vision Camera :2.0 Mp, 0.1 Lux, Resolution 720 P, Awb / Blc / Agc , Min 20M Range, Built-In Ir Illumination, White Color Case, Dc12v, Pal-Ce / Fcc Approved. Make: Cp Plus / Hikvision / Honeywell Or Equivalent 92 Supply, Installation, Testing & Commissioning Of Power Supply Unit For Above Camera As Speficied By Camera Manufacturer -12Vdc 10A 93 Supply, Installation, Testing & Commissioning Of Digital Video Recorder: 8-Channel Embedded Hd Dvr, 400Fps, Real-Time, With 2 Tb Hdd And English Osd, 230Vac. Rate Shall Be Inclusive Of All Accessories, Termination Of Cables, Etc Complete. 94 Supply, Installation, Testing & Commissioning Ofminium 19-21 Led Color Monitors. ( Lg / Samsung ) 95 Supply And Laying Ofcoaxial Cable 2+1 Rg59 / Rg6 Premium Quality Cctv Power And Video Cable With Isi Marked Pvc Conduit Including Terminations With Suitable Bnc Connector, Power Jack Etc Complete. 96 Capital Items 97 3 Kva Online Ups :Sit Of 3 Kva Online Ups Systems Of The Following Specifications :-True On - Line 3 Kva Ups System. Inversion Shall Be Microprocessor Controlled With Instantaneous Sine Wave Control Using Igbt. Ups Shall Have Standard Display Features, Alarms, Safeties, Etc Input Voltage Range : A.C 235 V ( +15% To -20% ) , 1 Phase Input Frequency : 50 Hz ( + / – 3Hz ) Power Factor : 0.9 Or Above. Thd : Less Than 5% ; Ripple Voltage In Battery Terminal: Less Than 2%Dc Voltage Minimum Back Up Time : Continuous 60 Mins At Full Load Rectifier Shall Be Full Wave Type ( Shall Fully Meet The Specified Input Power Requirements ) Battery Type : Smf, Including Battery Rack. 98 Laserjet Multi Functional Monochrome Network Printersupply And Installation At Site, All In Onelaserjet Multifunction Monochrome Printer Having Lcd Display, With Functions To Copy, Print And Scan, Print Resolution 600 Dpi X 600 Dpi, 20 Ppm Print Speed, Duty Cycle Minimum 8000 Pages Per Month, 24 Bit Depth, Usb, Wi-Fi Connectivity. Make : Hp / Brother / Canon / Epson Or Equivalent, For Bill Printing Cum Office Use With Warranty Period Of One Year. Connectivity: Hi-Speed Usb 3.0 Supported, Wi-Fi, Media Types: Paper, Envelopes, Labels, Cardstock, Transparencies, Postcards, Functionality: Print, Scan / Copy. Power Consumption: Maximum 250 Watts Recommended Make : Hp / Brother / Canon / Epson Or Equivalent 99 Laserjet Monochrome Network Printersupply And Installation At Site, Laserjet Monochrome Printer Having Lcd Display, With Functions To Copy And Print, Print Resolution 600 Dpi X 600 Dpi, 20 Ppm Print Speed, Duty Cycle Minimum 8000 Pages Per Month, 24 Bit Depth, Usb, Wi-Fi Connectivity. Make : Hp / Brother / Canon / Epson Or Equivalent 100 Visi Cooler / Pharmacy Refrigerator : Supply, Errection And Commisioning Of Lab / Pharmacy Refrigirator As Per Following Specifications : Upright Showcase Coolers / Refrigerators With Single Glass Door And Lock Having 350-450 Litre Capacity, Temperature Range Capability 1-10 Degree Celsius With Digital Temperature Controller And Display, Minimum Of 4 Adjustable Shelves / Racks Recommended Make: Celfrost, Bluestar, Voltas, Thermo Fischer 101 Supply, Installation, Testing And Commissioning Of All In One Type Desktop Computers.11Th Generation Intel® Core™ I3genuine Windows 10 Home Single Language, Ms-Officeintel® Uhd Graphics With Shared Graphics Memory8gb, 8Gbx1, Ddr4, 2666Mhz1tb 7200 Rpm 2.5 Sata Hard Drive Or 512Gb Ssd23.8-Inch Fhd ( 1920 X 1080 ) Anti-Glare Narrow Border Infinity Non-Touch Displaymake Dell Inspiron 24 5000 Or Hp Envy Or Equivalent 102 Cash Counting Machine Cum Fake Note Detector Make : Optimus-Model No.Olc 04 Or Equivalent 103 Cash Safe ( Coffer ) Volume. 14 L Min Wallthickness: 2.5 Mm Min For Body And 5 Mm Min For Door Recommended Make: Godrej Make, Model No. Premium Coffer Brn ( Ltem Code: Sebp 1112 ) Or Equivalent ( Only Manual Lockinq System ) 104 Miscellaneous Works 105 Water Dispenser: Supply And Errection Of Water Dispenser Can Hold 20 Litre Water Bottle Having Normal Standing Design With 14 Liter Refrigerator At Bottomand Having 3 Temperature Taps Hot, Plain And Cold. 3 Liter Cooling And 5 Liter Heating Capacity Per Hour. Body Made Of Abs Plastic And Tank Made Of Food Grade Stainless Steel. Heavy Duty Bottle Piercer With Bottle Holder. Withmin 1 Year Warranty. ( Make : Voltas / Blue Star / Equivalent ) 106 Backlit Flex Board: Supply, Installation, Testing And Commitioningof Backlit Flex Board Box Having Min 100Mm Depth And In Approved Size And Design Withminimum 2 Nos Of Ledtubelight Of6000k And 18W Per 1 Sqm Of Board`S Front Elevation . The Board Shall Be Fabricated Out Ofpainted Gi Metal Sheet On All Sides Excluding Frontand To Befixed Over Welded And Painted 25X25x3mm Ms Angle Frame In Flex Board Size . The Front Side Of The Board Should Be Fabricated With Good Quality Pvc Flex Sheet Printed In Approved Design And To Be Neatly Fixed With Gi Sheet . The Board Shall Be Properly Fixed In Suitable Location In Proper Line And Level With All Necessary Fastners, Supports Etc. Electrical Works Likes Electrical Internal Board Wiring, Connections, Fittings, Externaly Fixed Weather Proof 2 / 3 Pin Plug Points And Sockets Including Its Boardetc. To Be Complete Properly. All Fabrication Should Be Done As Per Aproved Design And Instructions Of Engineerin Charge. Note: Only Front Elevation Will Be Measured.

INR 2950 /-

INR 50000.0 /-

Refer document

Name of Work: Turnkey work for setting up of AMRIT Pharmacy at All India Institute of Medical Sciences (AIIMS), Rishikesh, Uttarakhand

Sl. No.	Item Description
1	CIVIL WORKS
2	Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared.
3	Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil.
4	Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size).
5	Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) upto plinth level with :Cement mortar 1:6 (1 cement : 6 coarse sand)
6	Fillingearth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m.
7	Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion)Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc.:With Chlorpyriphos/ Lindane E.C. 20% with 1% concentration
8	Supplying chemical emulsion in sealed containers including delivery as specified.Chlorpyriphos/ Lindane emulsifiable concentrate of 20%
9	Providing and layingReinforced cement concrete 1:2:4 (1 cement : 2 coarse sand (Zone III) : 4 graded stone aggregate 20 mm nominal size ) as damp-proof course of 150 mm thickincluding the cost of centering, shuttering, finishing , reinforcement and mixing water proofing material in cement concrete work etc complete.
10	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in:Cement mortar 1:4 (1 cement : 4 coarse sand)
11	Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand)
12	Reinforced cement concrete work in beams, suspended floors, roofs, having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases up to floor five level excluding the cost of centering, shuttering, finishing and reinforcement, with1:1.5:3 (1 cement : 1.5 coarse sand (Zone III) : 3 graded stone aggregate 20 mm nominal size).
13	Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth and floor V level. Thermo - Mechanically Treated bars of grade Fe-500D or more
14	Centering and shuttering including strutting, propping etc. and removal of form for all heights :Lintels, beams, plinth beams, girders, bressumers and cantilevers
15	Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.
16	15 mm cement plaster on the rough side of single or half brick wall of mix :1:6 (1 cement: 6 fine sand)
17	12 mm cement plaster of mix: 1:4 ( 1 cement : 4 fine sand)
18	Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)
19	Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface: Water thinnable cement primer
20	Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.
21	Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile including applying additional coats wherever required to achieve even shade and colour. Two coats
22	Providing and fixing 12 mm thick frameless toughened glass door shutter of approved brand and manufacture, including providing and fixing top & bottom pivot & double action hydraulic floor spring type fixing arrangement and making necessary holes etc. for fixing required door fittings, all complete as per direction of Engineer-incharge (Door handle, lock and stopper etc.to be paid separately).
23	Providing and fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including top & bottom fixing arrangement counter opening and making necessary holes etc. for fixing required fittings, all complete as per direction of Engineer-in-charge
24	Providing and fixing of single glass door SS Patch Lock with out handle in toughened glass door including all necessary screws etc. complete.
25	Providing and fixing SS H handle having min 450 mm length in toughed glass door including all necessary screws etc. complete.
26	Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) decorative type, core of block board construction with frame of 1st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters.30 mm thick including ISI marked Stainless Steel butt hinges with necessary screws
27	Providing and fixing stainless steel fancy handle of approved make fixed with SS screws etc. complete as per direction of Engineer-in-charge. 200 mm
28	Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete :300x16 mm
29	Providing and laying vitrified floor/wall tiles in different sizes (thickness to be specified by the manufacturer) including skirting with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades,laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc.,complete:Size of Tile 600x600 mm
30	Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby redArea of slab upto 0.50 sqm
31	Steel work in built up tubular ( round, square or rectangular hollow tubesetc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, and two or more coats of Enamel Paint including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes
32	Providing and fixing mild steel round holding down bolts with nuts and washer plates complete.
33	Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steelrade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineerin-charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.
34	Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet andolyester top coat 15-18 microns using self drilling/ self tapping screws complete
35	Ridges plain (500 - 600mm)
36	Gutter (600 mm over all girth)
37	Providing and fixing tiled false ceiling of approved materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick(minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of
38	the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottomexposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and asdirected by Engineer-in-charge. 12.5 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard,manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit.
39	Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover
40	Providing and fixing ball bearing for rolling shutters.
41	Extra for providing mechanical device chain and crank operation for operating rolling shutters Exceeding 10.00 sqm and upto 16.80 sqm in the area
42	Extra for providing mechanical device chain and crank operation for operating rolling shutters. Exceeding 16.80 sqm in area
43	Supplying and Plantation of large shrubs and hedge plant (Heliconiya st. Vincent red, Ixora bush, Cana durf , Afflorance Hedge Plant,etc..) or suitable outdoor ornamental plant in terracotta/earthern pot of minimum height 450 mm including Preparation of beds filling the earth after breaking clods and mixing with sludge or manure in the ratio of 8:1, flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc complete.
44	Furniture works
45	Double Level Counter:Providing and fixing Double Level Counter, first step at 750 mm from ground, 900mm wide and Counter top at 1100 mm level and 300 mm wide. 12mm thick acrylic sheet (pure white in colour) to be used for counter top on 25 mm thick prelaminated commercial ply. Display unit with 8mm thick toughened glass fascia and 18mm thick prelaminated shelves to be in built in counter with movable shutter. Counter should contain retractable keyboard trays and partitioned drawers with drawer channel, cupboard units with swing door and auto close hinges. Drawers and cupboard are to be fixed with individual locks and handles. Cable manager and leg space are also to be provided.150mm high SS glossy skirting all Complete as per the design and instructions of engineer in charge. 12mm thick toughened glass partition to be provided above counter up-to roof height with necessary counter opening. Note: Only front elevation of wooden counter will be measured. (12mm thick toughened glass will be paid separately). Make laminate: GREENLAM, MARINO or equivalent.
46	Table: Supply and installation of Working Table 900mm length X600mm depth X750mm height made with 18mm thick prelaminated particle board with one side decorative and other side balancing lamination and all edges to be fixed with matching PVC edge beeding. Partitioned storage unit having swing door ,Partitioned cash drawer, Key board drawer and leg spaceare also to be provided with individual locks and handles, autoclose hinges, drawer channels etc. complete as per the aproved design andinstructions of engineer in charge.
47	Chair: Medium back ergonomic chair with five nos. Star shaped Nylon base. Castors: 50mm diameter nylon twin wheel, gas lift height adjustment, back angle adjustment and backrest height adjustment. Fixed armrest providing natural resting for arms. Seat with PU cutted foam backed fabric, back rest with mesh type fabric. Upholstery: Heavy duty rubber backed fabric in BLACK.
48	Counter Height Stools : Supply and installation at site counter height stools of following specifications :Revolving adjustable Chrome plated steel body chairs with resistance to the corrosion.Cushion Seat with Lift mechanism for Adjustment of height. Minimum height 750mm before expansion. Medium Back rest and arm rest. Item shall be of reputed make.
49	Medicine display shelf: Open Wooden display laminated cabinets made up of Pre-laminated MDF Board, exterior Grade-I 18 mm thick confirming to IS:14587 with decorative lamination on one side and other side balancing lamination with proper provision of racks and shelves.Under storage unit of 600mm deep storage shall be 750mm from the ground with wooden shelves and door to be provided with hinges, lock, concealed handle, etc complete. Display wooden shelves @150mm C/c provided with 450 mm deep and 1350 mm height from the upper storage unit and to be to be fixed between laminated vertical 18mm MDF Board in back side and two edges and above the display unit an upper storage of 300 mm height with shutters, lock and concealed handles to be provided. All the edges to be finished with edge band and shelves to be fix with proper bracket holders complete as per approved layout. Note: Only front elevation will be measured.
50	Stainless Steel 2 Door 4 Glass Office almirah 400Width x 900 Length x 2000 height of make Godrej of minimum 1mm thick, approved colour and standard specification as per direction of Engineer in charge
51	Supply and erection of High quality retractable queue manager, ideal for indoor and outside use and suitable for crowd control purposes such as events queues and can easily be unhooked. Each cement and rubber base having minimum weighs 6.3 kg should have stronger ability against the wind than ordinary bases, rust free and even strength with frictionless floor protection. 202 Grade Extendable 2.25 m Hook Type Stanchions Barrier Accessories Steel Barricade, Que Manager – Red, having minimum height of 0.9 m, 5.5 kg concrete filled base for stable use without toppling. Flat shape base cover and stainless steel polish finish. Note: measurement will be made based on supply and erection of each set of stanchions (2 Nos with ribbon).
52	Electrical Work
53	Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.
54	Wiring for light/ power plug with 2X4 sq. mm FRLS PVC insulated copper conductor single core cable in surface/ recessed medium class PVC conduit alongwith 1 No. 4 sq. mm FRLS PVC insulated copper conductor single core cable for loop earthing as required. ( Recommended Material : Polycab, RR Kabel, V Guard, Havells)
55	Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required.( Recommended Material : RR Kabel/National/ Ralison/RKG/ Finolex / Polycab / Havells)
56	2 x1.5 sq.mm + 1x 1.5 sq. Mm earth wire
57	2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire
58	2 X 6 sq. mm + 1 X 6 sq. mm earth wire meter
59	S/F light plug point modular type accessaries : Supplying and fixing suitable size GI box with modular plate and cover in fronton surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection, painting etc as required,
60	S/F Power plug point with modular type switch : Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 15/16 and 15/16 amps modular switch, connection,painting etc as required.
61	S/F 20A SPN MCB industrial socket outlet : Supplying and fixing 20 A, 240 V, SPN Industrial type socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A, “C” curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket out let and complete with connections, testing and commissioning etc. as required.
62	S/F Modular boxes, base & cover plate : Supplying and fixing 1 or 2 module ( 75 mmx75 mm), GI box along with modular base, cover plate for modular switches in recess etc as required.
63	Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator)6 way , Double door
64	Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 8 way, Double door
65	Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 230 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. 4 way (4 + 12), TPN Double door
66	S/F "C" series, MCB : Supplyingand fixing5 amps to 32 amps rating, 240/415volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections,testing and commissioningetc. as required.
67	Single pole
68	Single pole and neutral
69	Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A
70	Supplying and fixing following rating, four pole, (three phase and neutral), 415 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required. 63A
71	Supplying and fixing Cable End Box (Loose wire box)(IP 43) suitable for following triple pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with testing and commissioning etc. as required. For 4 way, Double door TPN MCBDB
72	Supply,installation,testingandcommissioningofthe following types oflight fittings with all accessorieson false ceiling, true ceiling or wall as directedand giving connectionswith 16/0.20 mm 3 core PVC insulated andsheathedroundcopperconductorflexwireor extendingthe original wiring and giving connectionsas required. All recessed type fixtures are to be supportedindependentlywith chains or GI wire anchoredto the ceiling with anchoring bolt of necessary size. All loose wires above the false ceiling are to be neatly concealed by flexible metal/pvc conduits.( cost to include lamps & all consumables also)
73	Supply and installtion of 30-36W, 230V, 4300 lumen, 400K Recessed Square LED light fixture of dimession 600mm X 600mm on false cellling along with all accessories with intergrated driver THD<10% and connections as well as making good the damages as required at site Engineer. Recommended makes: Philips/Havells/Osram/Wipro or equivalent.
74	LEDtubelight of6000K and 15-18W on wall or ceiling as directedand giving connections as required.All loose wires are to be neatly concealed. (Make: Philips, Bajaj, Crompton or equivalent)
75	Supply, Installation, testing and commissioning of wall mount fan (400mm sweep), adjustable speed. min 60 degree oscillation, swing, Adjustable upward and downward tilt mechanism, Protective Guard, Including connections with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable, mounting accessories, etc. as required. It shall be double ball bearning type. (Make: USHA, Cromption ,Havells)
76	Supply, Installation, testing & commissioning of 3 phase 4 wire electronic type energy meter with LCD display with battery back up, class 1.00 CT with inbuilt CT. The whole unit to be mounted on suitable metal enclocure ( powder coated with locking arrangement, seperate enclosure for incoming and outgoing) with 3 Nos. HRC fuses, Neutral Link and all connections complete.
77	Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required.
78	Providing and fixing 4.00 mm dia copper wire on surface or in recess for loop earthing as required.
79	Supply and laying of following size 1.1 KV grade XLPE insulated, PVC sheathed, armoured Aluminium conductor power cable conforming to IS 7098 (Part 1) amended upto date.( including termination on both ends, laying as per site condition) 4C x 25 Sq.mm
80	Inverter Air Conditioner: Supply, installation, testing and commissioning of Air Cooled High Wall mounted Split Air Conditioner of following capacity consisting of high wall mounted type room unit (fan coil) with cordless remote control and one number outdoor condensing unit comprising of enegy efficient suitable rotary compressorfor operation on single phase, 230 V, 50Hz supply, fixing the outdoor unit on a raised platform as per manufacturers recommendation and fixing of room (fan coil) unit on wall, standard 4 m distance refrigerant copper piping with 13mm nitrile rubber insulation, providing and making interconnection between room& condenser as per site conditions, comprising of 1" dia drain PVC pipe with insulation 4m, canvas connections, full electrical cabling from power plug near indoor unit and to outdoor unit, ODU MS stand, first charge refrigarant gas, suitable stabilizer etc complete as required. ( Make : Voltas , Blue Star, Siemens, Hitachi ) :2.0 TR 3 star rated as per BEE
81	Supplying and fixing additional copper piping suitable for 2 TR AC in PVC casing.
82	Network
83	8 Port Network Switch : Supply and Installation at site : 10/100 Mbps 8-Ports Gigabit Switch . ( Make : D-Link DGS-1008A)
84	Providing and Fixing of RJ-45 socket outlet in the existing modular box with connections and all required.
85	Supplying,drawing and crimping with all accessories of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.1 run of cable from Port Switch to Data socket
86	Supply, installation and commissioning of powder coated DVR 6U Wall Mounted ServerRack ofISO Standard of size 400X 400X 200mm having depth adjustable mounting slots, top and bottom Panel with ventilation and cable entry facility, provision to mount the cooling fans on the top panel, lock and key etc. and having capacity to carry a max Load of 60 kg all complete as per the manufacturer specifications and instructions of Engineer In Charge.
87	Supply, installation, testing and commissioning of best quality cat-6 patch cord having1 metre length complete as per specifications as required.
88	Supply of ABC Type fire extinguisher of 2 Kgs. Make SAFEX / MINIMAX / CEASEFIRE or equivalent
89	CCTV
90	Supply, Installation, Testing & Commissioning ofIndoor IR Dome night vision cameras :2.0 MP, 0.1 lux, Resolution 720 P ,AWB/ BLC/ AGC,min 20m range, Built-in IR illumination, white color case, PAL-CE/FCC approved. Make: CP PLUS/HIKVISION/Honeywell or equivalent
91	Supply, Installation, Testing & Commissioning of Outdoor IR Bullet night vision camera :2.0 MP,0.1 lux, Resolution 720 P,AWB/ BLC/ AGC ,min 20m range, Built-in IR illumination, white color case, DC12V, PAL-CE/FCC approved. Make: CP PLUS/HIKVISION/Honeywell or equivalent
92	Supply, Installation, Testing & Commissioning of Power supply unit for above camera as speficied by camera manufacturer -12VDC 10A
93	Supply, Installation, Testing & Commissioning of Digital Video Recorder: 8-Channel Embedded HD DVR, 400fps, Real-time, with 2 TB HDD and English OSD, 230VAC. Rate shall be inclusive of all accessories, termination of cables, etc complete.
94	Supply, Installation, Testing & Commissioning ofMinium 19""-21" LED Color Monitors. (LG/Samsung)
95	Supply and Laying ofCoaxial cable 2+1 RG59/RG6 premium quality CCTV power and video cable with ISI marked PVC conduit including terminations with suitable BNC Connector, power Jack etc complete.
96	Capital items
97	3 KVA Online UPS :SIT of 3 KVA Online UPS Systems of the following specifications :-True on - line 3 KVA UPS system. Inversion shall be Microprocessor controlled with instantaneous sine wave Control using IGBT. UPS shall have standard display features, alarms, safeties, etc Input Voltage range : A.C 235 V (+15% to -20%), 1 phase Input Frequency : 50 HZ (+/– 3HZ) Power Factor : 0.9 or above. THD : less than 5% ; Ripple Voltage in battery terminal: less than 2%DC Voltage Minimum Back up time : Continuous 60 Mins at full load Rectifier shall be Full wave Type (Shall fully meet the specified input power requirements) Battery Type : SMF, including battery rack.
98	Laserjet Multi functional Monochrome Network Printer Supply and Installation at site, All in OneLaserjet Multifunction Monochrome Printer having LCD Display, with functions to copy, print and scan, print resolution 600 dpi x 600 dpi, 20 ppm print speed, Duty cycle minimum 8000 pages per month, 24 bit depth, USB, Wi-Fi connectivity. Make : hp/brother/canon/epson or equivalent, for Bill Printing cum Office use with Warranty period of one year. Connectivity: Hi-speed USB 3.0 Supported, Wi-Fi, Media Types: Paper, envelopes, labels, cardstock, transparencies, postcards, Functionality: Print, Scan/Copy. Power Consumption: Maximum 250 Watts Recommended Make : hp/brother/canon/epson or equivalent
99	Laserjet Monochrome Network Printer Supply and Installation at site, Laserjet Monochrome Printer having LCD Display, with functions to copy and print, print resolution 600 dpi x 600 dpi, 20 ppm print speed, Duty cycle minimum 8000 pages per month, 24 bit depth, USB, Wi-Fi connectivity. Make : hp/brother/canon/epson or equivalent
100	Visi Cooler / Pharmacy refrigerator : Supply, errection and commisioning of lab / pharmacy refrigirator as per following specifications : Upright Showcase Coolers/refrigerators with Single Glass Door and Lock having 350-450 Litre capacity, Temperature range capability 1-10 degree celsius with Digital Temperature Controller and Display, Minimum of 4 adjustable Shelves/Racks Recommended Make: CELFROST, BLUESTAR, VOLTAS, THERMO FISCHER
101	Supply, Installation, testing and Commissioning of all in One type desktop computers. 11th Generation Intel® Core™ i3 Genuine Windows 10 Home Single Language, Ms-Office Intel® UHD Graphics with shared graphics memory 8GB, 8GBx1, DDR4, 2666MHz 1TB 7200 rpm 2.5" SATA Hard Drive or 512GB SSD 23.8-inch FHD (1920 x 1080) Anti-Glare Narrow Border Infinity Non-Touch Display Make Dell Inspiron 24 5000 or HP Envy or equivalent
102	Cash Counting Machine cum Fake Note Detector Make : Optimus-Model No.OLC 04 or equivalent
103	Cash Safe (Coffer) Volume. 14 L Min WallThickness: 2.5 mm min for body and 5 mm min for door Recommended Make: Godrej make, Model No. Premium Coffer BRN (ltem Code: SEBP 1112) or equivalent (only manual lockinq system)
104	MISCELLANEOUS WORKS
105	Water Dispenser: Supply and errection of water dispenser can hold 20 litre water bottle having normal standing design with 14 liter refrigerator at bottomand having 3 temperature taps hot, plain and cold. 3 liter cooling and 5 liter heating capacity per hour. Body made of ABS plastic and tank made of Food grade stainless steel. Heavy duty bottle piercer with bottle holder. withmin 1 year warranty. (Make : Voltas / Blue Star / equivalent)
106	Backlit Flex Board: Supply, installation, testing and commitioningof backlit flex board box having min 100mm depth and in approved size and design withminimum 2 nos of LEDtubelight of6000K and 18W per 1 Sqm of board`s front elevation . The board shall be fabricated out ofpainted GI metal sheet on all sides excluding frontand to befixed over welded and painted 25X25X3mm MS angle frame in flex board size . The front side of the board should be fabricated with good quality PVC flex sheet printed in approved design and to be neatly fixed with GI sheet . The board shall be properly fixed in suitable location in proper line and level with all necessary fastners, supports etc. Electrical works likes electrical internal board wiring, connections, fittings, externaly fixed weather proof 2/3 pin plug points and sockets including its boardetc. to be complete properly. All fabrication should be done as per aproved design and instructions of Engineerin Charge. Note: Only front elevation will be measured.