Military Engineer Services-MES has published Tender For Repair To Roof Sheet, Steel Painting, False Ceiling And Misc Item In Domestic Area At Afs Yelahanka. Submission Date for this Tender is 03-01-2023. Coats and Jackets Tenders in yelahanka Karnataka. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 27-Dec-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-01-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling of plain or corrrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as specified and directed. |
| 2 | Dismantling timber scantlings unframed40 sq. cm and over in section, in any position, all as specified and directed. |
| 3 | S&F steel work in tubular trusses including special shaped washer etc complete or butt welded tubes conforming to IS-1161-1979 graded St-240 all as specified and directed. |
| 4 | S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 MPs as in roof covering/cladding to wall, fixed with self tapping screws all as specified and directed. |
| 5 | S&FPre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified |
| 6 | Dismantling of old Ceiling boards (Fibre, pulp, insulation, etc) or insulation boards/ slabs blankets,including cover fillets and frame work. |
| 7 | S&F ofArmstrong Board 12mm thick in ceiling fixed with screws all complete asper manufacturer’s instructions . |
| 8 | S&F Anodized aluminium snap grid ofsize 605mmx605mm (Powder coated) frame work for false ceiling, including 4mm dia GI wire for hanging all as specified in SSR and as directed by Eng-in-charge. |
| 9 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubbish off the premises complete all as specified and directed. |
| 10 | M&L fornon skid coloured ceramic tiles 7 to 8 mm thickarea of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm,in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile incl screedd bed 15 mm thick in CM (1:6)complete all as directedand specified. |
| 11 | M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing & complete 15mm thick screed bed in CM 1:4 , all as spd & directed. |
| 12 | M&L Vitrified tiles of light shade 10mm thick and area of each tiles not exceeding 0.36 Sqm for flooring over 15 mm thick screed bedin CM 1:6all as specified and directed. |
| 13 | M&L Non skid coloured Ceramic tiles 7 to 8 mm thick and area of each tiles not exceeding 0.18 Sqmas inflooring over 15mm thick screed bed in CM 1:6all as specified and directed. |
| 14 | M&L Glazed coloued Ceramictiles of size 450X350X7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to matchas in skirting/dadoover 10 mm thick plaster in CM 1:4 finished all as specified and directed . |
| 15 | S&F glazed coloured ceramic tiles 300x200x 6 to 7mm thick as in vertical surface such as skirting, dado, etc set and jointed in neat cement slurry and pointed in coloured cement to match the shade of tiles incl 10mm thick plastering in CM 1:3 complete all as specified |
| 16 | M&L for Granite(of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting, rounding of edges, grinding and polishing complete over 20mm thick screed bed in CM 1:6 all as specified and directed. |
| 17 | Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level). |
| 18 | M&L for repairing of 40mm thick flooring in patches with PCC (1:2:4)20mm graded stone agg. & finished even & smooth w/o using extra cement complete all as specified and directed by Engr-in-Charge. |
| 19 | M&L75 mm thick PCC 1:3:6 type C2 as in plinth protection and paving finishing surface even and smooth without using extra cement |
| 20 | Demolition of brick work or stone masonry built in CM incl all quions all as specified |
| 21 | Taking down cement plaster from wallsof any description all as specified and directed. |
| 22 | M&L for brick work with sub class "B" bricks , straight or curved on plan exc. 6 m mean radius built in CM 1:6 complete all as specified and directed. |
| 23 | M/L 15 mm thick cement plaster in CM (1:6) including finished even and smooth (without using extra lime or cement). |
| 24 | M&L 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls complete all as specified and directed. |
| 25 | M&L for applying two coats of distemper (OBD) including Preparation to the new surfaces of wall, all as specified and as directed |
| 26 | Preparation of newly plastered surfaces and applying two coats of cement base paint on walls incl priming surfaces with alkali resistant priming paintetc complete all as specified and directed. |
| 27 | M&L for Complete removal of existing wall surface finish and applyingtwo coat of oil bound distember all as specified and directed. |
| 28 | M&L for preparation of existing wall surface finish and applyingone coat of oil bound distember all as specified and directed. |
| 29 | M&L for Complete removal of existing surface finish and applying 1-2 mm thickwall careputty at wall and ceiling surfacesall as specified and directed. |
| 30 | M&L preparationof surface and applyingtwo coat of White wash on oldwall surface all as specified and directed. |
| 31 | M&L Preparing old painted wooden surface and applying one coat of Synthetic enamel Paintall as specified and directed. |
| 32 | M&L Preparing old painted steel surface and applying one coat of Synthetic enamel Paintall as specified and directed. |
| 33 | M&L for onecoat of exterior paint to old decoratedsurfacesof wallincl preparation of surfaces complete all as specified and directed. |
| 34 | Taking down door chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description |
| 35 | All as per item No 34 above but exceeding 1.5 sqm but not exceeding 4 sqm |
| 36 | Taking down shuttes of any description exc 1 Sqm and n.exc 2 Sqm,all as specified and directed. |
| 37 | Taking down shuttes of any description and refixing in the same opening after necessary easing and cutting all as specified and directed. |
| 38 | M&L Cutting holes in brick/stone walls built in CM for inserting hold fast and making good dismantled portion in CM 1:3 or PCC 1:2:4 (type B 0 )( using 12.5 mm graded aggregate) ¸depth of embedded portion of hold fast not exceeding half brick |
| 39 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in single side prelam PVC sheetused instead of Plain colour PVC sheet & edges will be painted to match with prelam sheet all as specified and directed. |
| 40 | S&F Factory Made Solid PVC Moulded Door Shutter, with particle board core 28 to 30 mm thick (stiles),with 2, 4, or 6 raised panel design with 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face including neccessary fitiings etc complete as specified and directed. |
| 41 | S & F II nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed all as specified and directed. |
| 42 | S&F Continuous(piano) hinges,mild steel,bright finish of electrogalvanised 30 mm width of flap. |
| 43 | M&L Prelaminated particle board,19 mm thick interior grade,prelaminated one side with decorative choice lamination & otherside balancing white lamination,fixed with screws to timber frame work as in repairs. |
| 44 | M&L 12mm thick block boards grade 2 quality, interior grade decorative type with decovative face veneer on one face, fixed with screws to timber frame work all as specified and as directed fixed in repairs |
| 45 | M&L Cover fillets of standard 4.5 mm thick ness hard board, 40mm wide,and fixing with screws. |
| 46 | S&F 300 mm ordinary rat rail rod pattern springs incl roller and roller plate complete. |
| 47 | S&F for 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides all as specified and directed. |
| 48 | S&F 35mm thick 2 nd class Hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc divided into squares,with plain,chamfered or rounded,mitred and rebated sash bars,any numbers.edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 and fitted to chowkats. |
| 49 | M&L preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer. |
| 50 | S&F Butt hinges of size 100mm extruded aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 all as specified and directed. |
| 51 | S&F aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets , cast or extracted section and fixing bolt and sliding bolts of extracted section. |
| 52 | S&F for aluminium anodised, barrel tower bolt 150mm of extruded section. |
| 53 | S&F for aluminium handle 150mm cast type anodised. |
| 54 | S&F floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate. |
| 55 | Hacking out old broken glass (any thickness, size, quality ordescription) from wooden frames or stone concrete glazed with oil putty or fixed with beeds. |
| 56 | S&F sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane all as directed by Engineer-in-Charge |
| 57 | All as item 56 above but figured glass pin head type. |
| 58 | S&F sheet glass ordinary quality 4.8mm thick as in window, showcase alum frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprime gasketall as directed by Engineer-in-Charge |
| 59 | S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm all as specified and directed. |
| 60 | S & F in repairs stainless steel wire cloth 0.36 mm nominal dia of wire and average width or aperture 1.40 mm all as specified and directed. |
| 61 | S & F framed work as grills conforming to Fe 290 Gde E-165 |
| 62 | M&L Preparing new steel surfaces of any description and applying two coat of Synthetic enamel Paint over one coat of red oxide zinc chrome to steel surface all as specified and directed. |
| 63 | S&F in repairsDecorative wooden finished curtain rod mild steel chromium plated of 20 mmdia all as directed and specified by Engr in charge. |
| 64 | S&F decorativewooden finished type chromium plated double brackets supports for holding curtain rods and corners to be fixed to ends of curtain with screws complete. |
| 65 | Taking up or down 15mm steel tubing and connections all as specified and directed. |
| 66 | Taking up or down 20mm steel tubing and connections all as specified and directed. |
| 67 | S&F 20 mm dia of CPVC pipes SDR 11 fittings on walls / ceiling or laying in floors complete all as specified. |
| 68 | S&F CPVC pipes25 mm SDR 11 & Plain CPVC SDR 11 on walls, ceiling or laying in floor including fitting in floors all as specified and as directed by Engr in Charge. |
| 69 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern), white premium quality (excluding fixing bolts, flushing cistern and flush pipe) all as specified and directed. Make: Cera/ Parryware/Neycer/Jaquar |
| 70 | S&F plastic pedestal pattern seat cover with flat bottom and cover and MS chormium plated hanging type device all as specified and directed. Make : Cera/ Parryware/Neycer/Jaquar |
| 71 | S&F in repairs vitreous China squatting pan "orrisa" pattern white colour of size 580x440mm with integral foot rests including p"trap andprovision of cement concrete for good making surfacecomplete all as specified & directed by Engr-in-charge. Makle:Cera/ Parryware/Neycer/Jaquar |
| 72 | Supply and Fixing in repairs 10 litrecapacity PVC syphonic action type for low level flushing cistern including all fittings and including flushing pipe fixed in repair all as specified and as directed. Make : Cera/ Parryware/Neycer/Jaquar |
| 73 | Supply and Fixingin repairs vitreous china wash basin, white or coloured of size 550 x 400 mmwith padestal including bracketsall as specified and as directed. Make : Cera/ Parryware/Neycer/Jaquar |
| 74 | S&F in repairs for vitreous china Under Counter sunk Modularwash basin white flat back size 190X550X430mm includingfixingof 32mm low density polylethyne pipes (LDPE)of pressure rating 6kg/cm2,coupling, directeded by Engr in Charge. Make: Cera/ Parryware/Neycer/Jaquar |
| 75 | S&F Vitreous chinaurinals, bowl type of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including poviding and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, fixingwith brackets,and union for discharge pipe fixed in repair, complete all as specified. Make: Cera/ Parryware/Neycer/Jaquar |
| 76 | S&F in repair Pillar tap 15mm bore fancy type chromium plated, with capstan head screwed down high pressure with or without lettered “Hot or cold” completed all as specified. Make : Cera/Parryware/Neycer |
| 77 | S&F in repair Bib taps chromium plated 15 mm with fancy type with capstan head handle screwed both ends for iron pipe or for union complete all as specified. Make : Cera/Jaguar/Ess Ess. |
| 78 | S&F in repair bib tap of PTMT any colour 15mm dia complete all as specified. Make: Prayag/ Polytuf or equivalent make as approved by GE |
| 79 | S&F in repairs Stop valve 15mm dia, concealed type chromium plate fancy type with long shank and cup complete all as specified and directed. Make : Cera/Jaguar/Ess Ess. |
| 80 | S&F sink cock in repairs fancy type complete all as specified and (table mounted) with 215 mm swivel spout complete all as specified and as directed. Make: Cera F2003302 or equivalent make in Jaguar/ Marc |
| 81 | S&Fin repair 15 mm dia two waybib taps (fancy type), cast copper alloy withwith crutch or butter fly handle screwed down, screwed for iron pipe or forbrass ferrule complete with check nut 15mm bore complete all as specified and directed by Engr-in-Charge. Make: Cera Model F2002161 or equivalent make in Jaguar/ Marc |
| 82 | S&F in repairs 15mm dia angle valves, cast copper alloy,CP, screwed down, high pre-ssure, with crutch, screwed both ends for iron pipe or for unions and fixed Make: Cera/ Jaguar/ Marc/ Sieco |
| 83 | S&F 600x450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers. Make : Modiguard/ Atul/ Govind |
| 84 | S&F PVC bathroom Cabinet mirror of size 500x400mm all as specified and directed. Make: Prayag Cat No-556 or equivalent make as approved by GE. |
| 85 | Supply and Fixing in repairs PVC connection 15mm size with PTMT Nut of length 600mm etc complete all as specified and as directed. Make: Prayag/ Polytuf or equivalent make as approved by GE |
| 86 | Supply and Fixing of32mm waste pipe for wash hand basinall as specified and as directed |
| 87 | S& F in repairs Brass chromium plated shower rose 125mm with swivel joints including fixing to steel pipe or union of 15mm bore all as specified and directed at site. Make : Cera/Jaguar/Ess Ess. |
| 88 | S & F in repairs CPShower arm 15 mm size, 195 mm long with bend of 45 degree with flangeas specified and as directed. Make : Cera/Jaguar/Ess Ess. |
| 89 | S&F CP towel rail 600 mm long fixed with chromium plated brass screws and wooden /plastic cleats fixed in repairs. Make : Cera/Jaguar/Ess Ess |
| 90 | S&F in repairs of CP health faucet complete including neccessary holding arrangements with screws etc all as specified and directed by the Engineer -in -charge. Make: Cera F-8030103 or equivalent make in Jaguar/ Marc |
| 91 | S&F in repairscorner Glass shelf assembly including neccessary holding arrangements with screws etc all as specified and directed by the Engineer -in -charge. Make: Cera Model F-5005102 or equivalent make in Jaguar/ Parryware |
| 92 | S&F PVC floor trap 110mm dia, with grating including jointing to waste pipe fixed in cement concrete type B1 (1:2:4) |
| 93 | S&F PVC(SWR) floor trap 75mm dia, with grating including jointing to waste pipe fixed in solvent cement |
| 94 | Demolition and breaking up drain pipes ( salt glazed ware , AC, PVC or reinforced conc ) set in cement mortar of internal dia 75-110mm incl any earth work and demolition of PCC, complete all as specified. |
| 95 | S&F in repairsPVC(SWR) Pipes 110mm dia single soketed, in any length with rubber ring joints, laid in trenches or in floors |
| 96 | S&F in repairsPVC(SWR) Pipes 110mm dia single soketed, in any length with rubber ring joints,fixed to wall |
| 97 | S&F in repairs PVC (SWR) pipes 75 mmsingle socketed,inanylength with rubber ring joints, laid in trenches or in floors. |
| 98 | S & F PVC (SWR) bends 75 mm dia in any radius with access etc. |
| 99 | S & F PVC (SWR) bends 110 mm dia in any radius with access etc. |
| 100 | S & F PVC (SWR) branch piece single 110mm Dia (single "Y") equal or unequal with access door including creating necessary provn in the existing PVC waste inlcuding jointing with rubber washer and solvent clamps etc. |
| 101 | S&F in repairsrotational moulded polyethylene water storage tank (cylindricalvertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (1000 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, threadedtype cover complete all as specified and directed by Engr-in-Charge. Make: Sintex/ Polycon/ KAVERI |
| 102 | S&F in repairsrotational moulded polyethylene water storage tank (cylindricalvertical with closed top) hoisted and jointed in position all as specified in SSR Part-I (500 ltr capacity) including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, threadedtype cover complete all as specified and directed by Engr-in-Charge. Make: Sintex/ Polycon/ KAVERI |
| 103 | S&F in repair Ball Brass valve 25 mm dia high pressure, with polythene float and flynut complete all as specified and as directed. Make: Leader/ Zololo/ Prayaq |
| 104 | S&F in repairs CP grating size 100mm all as specified and directed. |
| 105 | S&F in repairs Kitchen sinks with drainage board made ofstainless steel 1 mm thick with plugs, washers and wastes, including bedding in cementmortar to wallwith all fixing arrangements of overall size 915x460mm and bowl size 410x330x160mm all as specified and directed. Make : Nirali/ diamond/Blue star |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
