Tender For Maintenance Of Runway Like Pme, Patch Repairs, Shoulder Repairs, Mafi Boards Etc At Afs Yelahanka
Tender Value
49.50 Lakhs
Estimated cost
Bid Submission
27 Dec 2022
0 days left
EMD
99000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
yelahanka → Karnataka
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Maintenance Of Runway Like Pme, Patch Repairs, Shoulder Repairs, Mafi Boards Etc At Afs Yelahanka
BOQ
| Sl. No. | Item Description |
| 1 | Rolling and consolidating dry bituminous macadam sufrace any thickness and any No of passes to the satisfaction of Engr-in-charge with 8 tonne to 12 tonne capacity road roller.Note:- Rolling on Runway surface to be done with due care and avoilding all types of runway lights and other components. Any damanges to such items has to be replaced by the contractor at their own cost. |
| 2 | Material and labour for preparing old black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with using air blower to remove all loose dirt etc., complete and applying evenly a coat ofcold Polymer Modified Emulsion (PME) by using mechanical sprayer, spraying of total cold liquid PME 0.50 Ltr per Sqm (undiluted) for single coat with mineral filler as recommended by manufacturer of PME (after diluting with water), each coat diluted in the ratio 1:1 (PME : Water) and ensure uniform finish on applied area. Complete all as per manufacturer instructions and all as specified and directed by Engr-in-Charge.Make :- Polymeric Modified Emulsion ( PME) Brand Name : EMULCOTE of M/s L N Petro Chem Pvt Ltd / HINMAT PLUS (Polymer Modified Emulsion) of Hindustan Colas Pvt ltd.NOTES: The tender shall take into consideration the following points while quoting his rate for this item :- (a) The work shall be gotcarried out from the manufacturer or hisauthorised applicator only.(b) Care shall be taken to fill wider gaps/cracks with 0.60 mm to 2.36 mm size coarse sand as per manufacturer\"s instructions.(c) A Performance guarantee certificate for two years shall be submitted by the contractor to the GE on completion of the work as specified.(d) Contractor shall carryout friction test using CFME ( Continuous Friction Measuring Equipment ). The test is to be got done from Government Engineering College/Bangalore University. Nothing extra shall be payable on this account, the quoted rates are deemed to be inclusive for carrying out this test also. The test using CFME will be conducted on the surface of application of PME before and after application of PME and certificate towards this will be submitted for the same |
| 3 | Material and labour for preparing old black top surfaces by brushing with wire brushes for removing caked mud etc., sweeping with brooms and finally fanning the cleaned surfaces with using air blower to remove all loose dirt etc., complete and applying evenly a coat ofcold Polymer Modified Emulsion (PME) by using mechanical sprayer, spraying of total cold liquid PME 0.50 Ltr per Sqm (undiluted) for single coat with mineral filler as recommended by manufacturer of PME (after diluting with water), each coat diluted in the ratio 1:2 (PME : Water) and ensure uniform finish on applied area. Complete all as per manufacturer instructions and all as specified and directed by Engr-in-Charge. Make :- Polymeric Modified Emulsion ( PME) Brand Name : EMULCOTE of M/s L N Petro Chem Pvt Ltd / HINMAT PLUS (Polymer Modified Emulsion) of Hindustan Colas Pvt ltd. NOTES: The tender shall take into consideration the following points while quoting his rate for this item :- (a) The work shall be gotcarried out from the manufacturer or hisauthorised applicator only.(b) Care shall be taken to fill wider gaps/cracks with 0.60 mm to 2.36 mm size coarse sand as per manufacturer\"s instructions.(c) A Performance guarantee certificate for two years shall be submitted by the contractor to the GE on completion of the work as specified, (d) Contractor shall carryout friction test using CFME ( Continuous Friction Measuring Equipment ). The test is to be got done from Government Engineering College/Bangalore University. Nothing extra shall be payable on this account, the quoted rates are deemed to be inclusive for carrying out this test also. The test using CFME will be conducted on the surface of application of PME before and after application of PME and certificate towards this will be submitted for the same. |
| 4 | Material and labour for one coat of painting lines, dashes, arrows , letters, etc on bituminous / concrete surfaces exceeding 10cm width with approved water base paint of color white , Golden yellow, deep orange , PO red and black as per the requirementin the Air field including preparation of surfaces complete all as specified and directed.Make : APCOTRAK of Asian paints or Equivalent in Berger/ShalimarCoverage area of paint shall be 6 Sqm / Ltr adding 10-15% of potable water (Dispersals and taxitracks) |
| 5 | Material and labour for one coat of painting lines, dashes, arrows , letters, etc on bituminous / concrete surfaces exceeding 10cm width with approved water base paint of color white , Golden yellow, deep orange , PO red and black as per the requirementin the Air field including preparation of surfaces complete all as specified and directed.Make : APCOTRAK of Asian paints or Equivalent in Berger/ShalimarCoverage area of paint shall be 10 Sqm / Ltr adding 10-15% of potable water (Runway surfaces) |
| 6 | M&L for approved red earthfilling in Shouldersof flight strips duly cleared the grass and vegetation growthand laying of earth in layers n exc 25cm thick spread, levelled and rammed and rolled with 8-10 TONRoad Roller including watering in the required compaction leveland gradient/slope all as specified and as directed.Note: water as required will have to be brought in bouser as directed. |
| 7 | Supply and fix5mm thickpolycarbonate sheetpanel, suitable for fixing stickers in one sideforvarious types of Sign board in Air Fied areaof anysizeas in repairs/replacement andfor new sign boards, all as specified and directed . |
| 8 | Material and labour forHIP (Reflective) stickers in repairs and replacement of various size and shapeon different types ofsign boards of Air field area using 3M ™ High Intensity Grade Prismatic Reflective sheeting 3930 to 3937 seriesof approved colour fixing with pressure sensitive adhesive for unique construction providing high levels of retroreflectivity for multiple traffic situations providing long term reflectivity and durability all as specified and directed. |
AI Tender Summary
Tender Timeline
Dec 22, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 27, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 29, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender