Public Works Department-PWD has published Construction Ofopd Block At Regional Hospital Una (Hp)( Sh: C/O Building Portion, Water Supply And Sanitary Installation, Rain Water Harvesting Tank , Septic Tank And Site Development Etc. Submission Date for this Tender is 30-12-2022. Water Harvesting Tenders in Una Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Excavation in foundation trenches etceterain all classification of soil such as pick work,jumper work,pick jumper work,blasting work and hard blasting work in dry or saturated condition upto any depth and lift including pumping and bailing out water where required including stacking the serviceable and unserviceable material separatelyas directed and then returning the stacked soil in 15cm(fifteen centimeter) layers when required into plinth and sides offoundation etceteraconsolidating each deposited layer by ramming and watering and then disposing of all surplus unserviceable excavated earth as directed by the Engineer in charge including entire carriage of material and disposal all surplus excavated/bored out earth within all leads and lifts and other incidentials .Any loss to the public /private property during the course of execution shall be abssolute respossibility to the contractor which shall have to be duly compensated by him in all cases as per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. |
| 2 | Supplying and fillingin plinth with sand under floors, including watering, ramming, consolidsating and dressing complete .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by theGovernment.. |
| 3 | Providing form work with steel plates 3.15mm (three point fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm ( thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of the same for insitu reinforcement and plain concrete work in foundation footing and bases of columns etcetera and mass concrete includingcarriage of materialwithin all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. |
| 4 | Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm (thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of same for in-situ reinforced concrete and plain concrete work in flat surfaces such as soffits of suspended floors roofs landings and the like floors in all thickness in all floor level includingcarriage of material entirewithin all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by theGovernment. |
| 5 | Providing form work with steel plates 3.15 mm( three decimal fifteenmillimeter ) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter) so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of the same for in-situ reinforced concrete and plain concrete work in columns, pillars, posts and struts square rectangular or polygonal in plan in any height upto all floor levelincluding entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. |
| 6 | Providing form work with steel plates 3.15mm(three decimal fifteen millimetre ) thick welded with angle iron in frameof 30x30x5mm(thirty into thirty into five millimeter) size so as to give a fair finish including centering ,shuttering ,strutting and proppingetcetera with wooden battens and balliesfor all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of the same for in-situ reinforced concrete and plain concrete work in:- beams cantilevers girders and lintels side and soffit of beams ,beam haunchings, cantilevers, bressumers and lintels in any depth / heights /thickness upto all floor levelincluding enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. |
| 7 | Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5 mm (thirty into thirty into five millimeter) size so as to give a fair finish including centering shuttering strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling and removal of same for in-situ reinforced concrete and plain concrete work in vertical surfaces such as walls(any thickness) partitions and the like including attached pilasters buttresses,plinth and string courses and the likeincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. |
| 8 | Providing form work with steel plates 3.15mm(three decimal fifteen millimetre) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimetre) size so as to give fair finish including centering ,shuttering ,strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of the same for in-situ reinforced concrete and plain concrete work:- in edges of slabs and breaksin floors and walls etceteraupto any width /height completeupto all floor level including enitre carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. |
| 9 | Providing form work with steel plates 3.15mm(three decimal fifteen millimeter) thick welded with angle iron in frame of 30x30x5mm(thirty into thirty into five millimeter)so as to give a fair finishincluding centering ,shuttering, strutting and propping etcetera with wooden battens and ballies for all heights of propping and centering below supporting floor to ceiling not exceeding 4 meter and removal of the same for in-situ reinforced concrete and plain concrete work in stair cases with sloping or stepped soffits excluding landing complete upto floor all levelincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. |
| 10 | Providing and laying cement concrete 1 : 5 : 10 ( one cement : five sand : tengraded crushed stone aggregate 40mm(forty millimetre nominal size) mechanically mixed and curing complete excluding cost of form work in foundation and plinthupto all floorlevel including carriage of material with in all leads and lifts and other incidental. .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by theGovernment.. |
| 11 | Providing and laying cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm (forty millimetre) nominalsize .in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts, struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchor blocks, plain window sills, fillets, sunken floor etc., up to all floorlevels, excluding the cost of centering, shuttering and finishingupto all floorlevel including carriage of material with in all leads and lifts and other incidental. .The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by theGovernment.. |
| 12 | Providing and laying cement concrete 1:4:8 (one cement: four sand:eight graded crushedstone aggregate 40mm( forty millimeter nominal size)mechanically mixed andcuring complete excluding cost of form work in all work upto plinth level including enitre carriage of materialwithin all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. |
| 13 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level :1:3:6 (oneCement : three coarse sand): sixgraded crushed stone aggregate 20 mm( twenty millimetre) (twenty millimetre)nominal size) as directed by Engineer-in-chargeincluding carriage of material within all leads and lifts and other incidentials. The rate includes sale tax octori, royality,malkhana ,toll tax,GST,labour cess or other taxes imposed by theGovernment.. |
| 14 | Providing and laying damp proof course 40mm forty millimeter)thick with cement concrete 1:2:4 (One cement:two sand:four graded crushed stone aggregate 12.5mm (twelve point five millimeter )nominal size) and curing complete including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by theGovernment. |
| 15 | Providing and applying a coat ofresidual petrolum bitumen grade of VG-10 of approved qualityusing 1.70 kg. (one point seventy kilogramme)per square meteron damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. |
| 16 | Providing and laying cement concrete workof grade M-20(M-twenty )design mix to obtain the minimum crushing strength of 20 N/mm2 (twenty Newton per millimetre square )with minimum cement content not less than 340 kg (threehundred forty kilogramme ) per cubic metre mechanically mixed includingcuring complete excluding cost of form workand reinforced concrete work in all work upto plinth levelincluding entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 17 | Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty five Newton per millimeter square )with minimum cement content not less than 400 kg (Four hundred kilogramme )per cubic meter mechanically mixed and vibratedincludingcuring completein walls including attached pillasters buttresses plinth and string coursespillar columns, pillars, piers, abutment post andstruts etc. above plith level upto all floor level excluding cost of centrig, shuttering finishing and reinforcementincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. |
| 18 | Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty five Newton per millimeter square )with minimum cement content not less than 400 kg (Four hundred kilogramme ) per cubic meter mechanically mixed and vibratedincludingcuring complete excluding cost of form workand reinforced concrete work in foundation,footing bases of columns and the like and mass concretein all depth/heightsincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. |
| 19 | Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty five Newton per millimeter square )with minimum cement contentnoit less than 400 kg (Four hundred kilogramme )per cubic meter mechanically mixed and vibratedincludingcuring complete excluding cost of form work and reinforcedconcretework in walls ( any thickness) including attached pillasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level upto all floor level including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. |
| 20 | Providing and laying reinforcement cement concrete work of grade M-25(M-twenty five )design mix to obtain the minimum crushing strength of 25 N/mm2 (twenty Newton per millimeter square )with minimum cement contentnot less than400 kg (fourhundredkilogramme ) per cubic meter mechanically mixed and vibratedincludingcuring complete excluding cost of form workand reinforced concrete work in Beams, suspended floors having slope 15 degree landing, balconies, shelves, chajjas, lintels, bamnds, plain windows sills, stair cases and spiral stair cases above plinth level upto all floor levelincluding entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. |
| 21 | Providing in RCC work smooth finishing of the exposed surface with 6mm thick cement mortor 1:3(One cement:three sand) in all floor level/heightincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. |
| 22 | Providing and laying mild steel medium tensite steel barstor steel (Sail/RINL/Shyam steel Tisco, Jindal panther (JSPL)make) reinforcement for reinforced cement concrete work including ,bending binding,straightening and placing in position complete in all floor level/ heights including cost of binding wire completeincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,sale tax ,GST,labour cess or other taxes imposed by theGovernment. |
| 23 | Brick workwith common burnt clay F.P.S.(Non modular) bricks of class designation 7.5 in foundation and plinthin cement mortar 1:6(one cement: six sand ) includingcuring complete in any depth/height including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. |
| 24 | Brick work with Rat Trap Bond withcommon burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to allfloor level in all shapes and sizes in Cement mortar 1:4 (one cement : four coarse sand)including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. |
| 25 | Brick work with common burnt clay F.P.S.(Non modular) bricks of class designation 7.5in superstructure above plinthlevel upto all floor level /height in all shapes and sizecement mortar 1:6(one cement: six sand ) includingcuring complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment. |
| 26 | Half brick masonry with common burnt clay buildingbricks in cement mortor1:4(One cement :four sand) in superstructure in all floor level/height curing complete and including entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 27 | Half brick masonry with with common burnt clay F.P.S.(Non modular) bricks of class designation 7.5in foundation and plinth bricks in cement mortor1:4(One cement :four sand) in superstructure in all floor level/height curing complete and including entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 28 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.including entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 29 | Supplying and stacking of hard stone (for stone pitching) 22.5 cm. thick at site including entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 30 | Providing and fixing cup board shutters 25 mm(twenty five milliemtre) thick, with Pre-laminated flat pressed three layer particle board or graded wood particle board IS: 12823 marked,of Action tesa,Black cobra,Green ply,Kit ply make exterior grade (Grade l Type ll), having one side decorative lamination and other side balancing lamination, including IInd class teak wood lipping of 25 mm wide x12 mm thick with necessary screws and bright finished stainless steel piano hinges, complete as per direction of the Engineer-in-Charge including entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 31 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked,of Action tesa,Black cobra,Green ply,Kit ply makein shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).18mm thick including entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 32 | Providing and fixing Pre-laminated flat pressed 3 layer (medium density) particle board or graded wood particle board IS : 3087 marked, with one side decorative and other side balancing lamination Grade I, Type II exterior grade IS : 12823 marked,of Action tesa,Black cobra,Green ply,Kit ply makein shelves with screws and fittings wherever required, edges to be painted with polyurethane primer (fittings to be paid separately).25mm thick including entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 33 | Providing and fixing 6mm(six millimetre) thick commercial ply conforming to IS: 1328 BWR type ofAction tesa,Black cobra,Green ply,Kit ply make plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately).including entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 34 | Providing andFixing decorative high pressure laminated sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming to IS : 2046 Type S, including cost of adhesive of approved quality.1.00mm thick including entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 35 | Providing and fixing 2nd class teak wood lipping/ moulded beading or taj beading of size 18X5 mm fixed with wooden adhesive of approved quality and screws/nails on the edges of the Pre-laminated particle board as per direction of Engineer-in-charge.including entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 36 | Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Ply wood 5 ply, 9 mm thick:Decorative plywood one side decorative veneer and commercial veneer on other face (Type 1) conforming to IS 1328 BWR Type including entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 37 | Providing wood work in frames of false ceiling, partitions etc. sawn and fixed in position with necessary stainless steel screws etc First class Sal wood including entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 38 | Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood.55x30 mm (fifty five into thirty millimetre) (base and height) including entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 39 | Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm (four millimetre)thick float glass panes, including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws.Second class teak wood 30 mm thick including entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 40 | Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood.25x12 mm(Twenty five into tweleve millimetre)(base and height)including entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 41 | Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood.19x19mm (Ninteen into ninteen millimetre) (base and height) including entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 42 | Providing and fixing aluminium work(Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately) :For fixed Portion Powder coated aluminium (minimum thickness of powder coating 50 micron) entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 43 | Providing and fixing aluminium work(Polyester powder coated aluminium (minimum thickness of polyester powder coating 50 micron) for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-incharge. (Glazing, paneling and dash fasteners to be paid for separately)For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron) entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 44 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid With float glass panes of6mm thickness (weight not less than15.00 kg/ sqm)entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 45 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid With float glass panes of 5 mm thickness (weight not less than 12.50 kg/ sqm) entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 46 | Providing and fixing glazing (Modi Guard or its equivalent) in aluminium door, window,ventilator shutters and partition etc with PVC/neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-In-charge (cost of aluminium snap beading shall be paid With float glass panes of 5.0 mm(Five millimetre) thickness (weight not less than 10 kg/ sqm) entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 47 | Providing and fixing double action hydraulic floor spring of approved brand and manufacture conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge.With stainless steel cover plate minimum 1.25 mm thicknessentirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 48 | Providing and fixingFlyproof stainless steel grade 304 wire gauge with 0.5mm(zero point five millimetre) dia wireand 1.4mm (one point four millimetre) wide appertrue with matching alumninium beading including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 49 | Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineerin-charge. (Only weight of grill to be measured for payment).entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 50 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer- in-charge.Pre-laminated particle board with decorative lamination on both sides entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 51 | Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge.Pre-laminated particle board with decorative lamination on one side and balancing lamination on other side entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 52 | Providing and fixing 0.63mm(zero point sixty three millimetre) thick PGI sheet covering of approved pattern & design, made out of machine cutcoveringwith stainless steel screws lincluding providing aluminium washers 2 mm thick, at a staggered pitch of 200mm centre to centre including drilling holes in the receiving surface and providing expandable plastic sleeves in holes etc. complete as per direction of Engineer-in-charge0.63mm thick PGI sheet entirecarriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. |
| 53 | Providing and fixing anodized aluminium sliding door bolts anodized colour or shade with bolts and nuts screws etcetera complete including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax, GST,labour cess or other taxes imposed by theGovernment. i)300×16mm(three hundred into sixteen millimeter) |
| 54 | Providing and fixing anodized aluminium sliding door bolts anodized colour or shade with bolts and nuts screws etcetra completeincluding carriage of materialwithin all leads and lifts and other incidentialsas per direction by the Engineer-in-charge .The rate includes octroi, royality,malkhana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. i)250×16mm(two hundred fiftyinto sixteen millimeter) |
| 55 | Providing and fixing anodized aluminium tower bolts (barrel type )anodized colour or shade with bolts and nuts screws etcetra complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment.i)200×10mm(two hundred into ten millimetre) |
| 56 | Providing and fixing anodized aluminium tower bolts (barrel type )anodized colour or shade with bolts and nuts screws etcetra complete including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by theGovernment. . .i)150×10mm(one hundred fiftyinto ten millimetre) |
| 57 | Providing and fixing anodized aluminium tower bolts (barrel type )anodized colour or shade with bolts and nuts screws etcetra complete including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax ,GST,labour cess or other taxes imposed by theGovernment. . .i)100×10mm(one hundred into ten millimetre) |
| 58 | Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete including entire carriage of material within all leads and lifts and other incidentials as per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment..(a)125mm(one hundred twenty five millimeter) |
| 59 | Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera completeincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. ..(a)100mm(one hundred millimeter |
| 60 | Providing and fixing aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera completeincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. ..(a)75mm(seventy fivemillimeter |
| 61 | Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete 150x10mm(One hundred fiftyinto ten millimetre)including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. |
| 62 | Providing and fixing bright finished brass handles with screws etc. complete 100mm (One hundred millimetre) including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. |
| 63 | Providing and fixing 50mm(fifty millimeter) chromium plated brass cup board ward robe knob cmplete including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 64 | Providing and fixing special qualtity bright finished brass cup boardlocks or ward robe locks with four levers complete 40mm (forty millimetre) including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 65 | Providing and fixing 150mm(one hundred fifty millimetre)bright finished brassdoor stopper with rubber cushionscrew etcetrato suitshutter thickness complete including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 66 | Providing and fixing bright finished harddrawn hooks and eyes 150mm(One hundred fifty millimeter)completeincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 67 | Providing and fixing chromium plated brass curtain rod having wall thickness of 1.25mm with two chromium plated brass brackets fixed with C.P. brass screws and PVC sleeves etc., wherever necessary complete :25mm dia including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 68 | Providing and fixing magnetic catcher of approved quality in cupboard / ward robe shutters, including fixing with necessary screws etc. complete.Triple strip vertical typeincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 69 | Providing and fixing 75x60mm (seventy five and paise sixty millimetre) wooden moulded hand railingwith iron screws, plugs and priming coat on unexposed surface etc. completeincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 70 | Providing and fixing M.S. grills of (Tata/sailmade) required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete Fixed to openings /wooden frames with rawl plugs screws etc. including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 71 | Providing and laying Kota stone slab flooring 25mm (twenty five millimeter)(average) thick base of cement mortor 1:4(one ceent:four sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete 25mm(Twenty five millimeter) thickcomplete upto floor all levelincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 72 | Marble stone flooring with 18 mm(eighteen millimetre) thick marble stone, asper sample of marble approved by Engineer-in-charge,over 20 mm (average) thick base of cement mortar 1:4(one cement : four coarse sand) laid and jointed with greycement slurry, including rubbing and polishing complete 18 mm thick white marble upto floor all levelincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 73 | Providing and laying Kotastone slab 20mm(twentymillimetre) thick in risers of steps skirting dado andpillarslaid on12mm(tweleve millimeter) thickcement mortar 1:3 (one cement : three sand) andjointedwith grey cement slurrymixed withgreycolourto matchthe pigment includingrubbing and polishing complete upto any floor level height including entire carriage of material within all leads and lifts and other incidentials and as per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 74 | Marble stone flooring with 18 mm thick marble stone, asper sample of marble approved by Engineer-in-charge,over 20 mm (average) thick base of cement mortar 1:4(one cement : four coarse sand) laid and jointed with greycement slurry, including rubbing and polishing complete 18 mm thick Baroda Green marble upto floor all levelincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 75 | Whitestone slabs 20 mm (twenty millimetre)thick in risers of steps, skirting, dado and pillars laidon 12 mm(tweleve millimetre) (average) thick cement mortar 1:3 (one cement: three coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete upto floor all level including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment |
| 76 | Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than0.5% and conforming to IS: 15622 of approved make in all colours andshades in for outdoor floors such as footpath, court yard, multi modalslocation etc., laid on 20mm thick base of cement mortar 1:4 (one cement : four coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment |
| 77 | Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.upto floor all level including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 78 | Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent upto floor all levelincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 79 | Extra for pre finished nosing to treads of steps of marble stoneincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 80 | Extra for pre finished nosing to treads of steps of kotastoneincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 81 | Extra for Kota stone/ sand stone in treads of steps and risers using single length up to 1.50 metre. including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 82 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (one cement :four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 800x800 mm Khajaria or Nitico make upto floor all levelincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 83 | Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (one cement : four coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete Size of Tile 600x600 mm Khajaria or Nitico make upto floor all levelincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 84 | Providing and laying matt finished vitrified tile of size 300x300 x 9.8mm having with water absorption less than 0.5% and conforming to IS: 15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (one cement : four coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in chargeKhajaria or Nitico make upto floor all levelincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 85 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (one cement: three coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete Size of Tile 600x600 mmupto floor all levelincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 86 | Providing and fixing 1st quality ceramic glazed floor tiles conforming to IS : 15622 (thickness to be specified by the manufacturer ) of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:3 (one cement: three coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete upto floor all levelincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 87 | Cement concrete flooring 1:2:4 (one cement : two coarse sand : four graded stone aggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete.40 mm thick with 20 mm nominal size stone aggregate upto floor all levelincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 88 | Cementplaster skirting upto 30cm height with cement mortar1:3 ( one cement : three sand)finished with a floating coat of neat cement, includingrounding of junctionwith floor 18mm thick upto floor all levelincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 89 | Extra for providing and fixing glass strips in joints of terrazzo floors.40 mm wide and 4 mm thick. including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 90 | Madanared sand stone flooring with 40 mm (forty millimetre) thick marble stone, asper sample of marble approved by Engineer-in-charge,over 20 mm (average) thick base of cement mortar 1:5(one cement : five coarse sand) laid and jointed with greycement slurry, including rubbing and polishing complete 18 mm(twenty millimetre)thick Madana red stoneincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 91 | Madanared sand stone skirtingwith 18 mm thick marble stone, asper sample of marble approved by Engineer-in-charge,over 20 mm (average) thick base of cement mortar 1:4(one cement : four coarse sand) laid and jointed with greycement slurry, including rubbing and polishing complete `18 mm thick Madana red stoneincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 92 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-inCharge 80mm thick cement concrete paver block of M-35 grade with approved colour, design and patternincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 93 | Providing and laying factory made chamfered edge Cement Concrete paver blocks in footpath, parks, lawns, drive ways or light traffic parking etc, of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over 50mm thick compacted bed of sand, compacting and proper embedding/laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand. complete all as per direction of Engineer-inCharge 80mm thick cement concrete paver block of M-30 grade with approved colour, design &pattern including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 94 | Providing and laying brick tiles over mumty roofs, grouted with cement mortar 1:3 (onecement : three fine sand) mixed with 2% of integral water proofing compound by weight of cement, over 12 mm(tweleve millimetre) layer of cement mortar 1:3 (one cement : three fine sand) and finished neat:With common burnt clay F.P.S. (non modular) brick tiles of class designation 10 including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 95 | Providing and fixing in position collapsible steel shutters with vertical channels 20x10x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 96 | Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete.110mm dia of D-plast or vectus makeincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 97 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.110mm dia of D-plast or vectus make including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 98 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion of D-plast or vectus make.Plain bend 110mm dia including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 99 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion of D-plast or vectus makeShoe (Plain)110mm dia including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 100 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion of D-plast or vectus makeCoupler 110mm dia including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 101 | Steel work Tata or Sail make make welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required In gratings, frames, guard bar, ladder,railings, brackets, gates and similar worksincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 102 | Steel work Tata or Sail make makein built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete.Hot finished welded type tubesincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 103 | Providing and fixing M.S tube hand rail Tata or Sail make makeof approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer. including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 104 | Painting Steel work with Deluxe Multi Surface Paint to give an even shade. Two or more coat applied @ 0.90 ltr/ 10 sqm over an under coat of primer applied @ 0.80 ltr/ 10 sqm of approved brand and manufacture Assianor Nerolac makeincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 105 | Applying priming coat With ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood) Ready mixed paint brushing with whitelead for priming Assianor Nerolac makeincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 106 | Painting wood work with Deluxe Multi Surface Paint of required shade. Two or more coat applied @ 0.90 ltr/10 sqm over an under coat of primer applied @0.75 ltr/10 sqm of approved brand and manufacture of Assianor Nerolac makeincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 107 | Painting polishing on wood work with ready mixed wax polish of approved brand and manufacture :New wood work Assianor Nerolac makeincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 108 | 6mm (six millimetre) Cement plaster to ceilingin all floor level in Cement mortar 1:3(One Cement:three Sand) including curing complete including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. . |
| 109 | 15mm cement plaster in single coat on rough side of single or half brickwalls for interior plasteringupto any floorlevel/heightincluding arrises, internal rounded angle, chamfers and/or rounded angles not exceeding 80mm (eighty millimeter)in girth and fuinished even and smooth in cement mortar 1:6 (1 cement : 6 sand)including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax,GST,labour cess or other taxes imposed by theGovernment. |
| 110 | 20mm (twenty millimetre)cement plaster in single coat on rough side of brick/concrete/stone walls for interior plastering in allfloor level/heightincluding arrises, internal rounded angles, chamfers and/or roundedangles not exceeding 80mm(Eightymillimeter) in girth and finished even and smooth in cement mortar1:6 ( one cement : six sand)including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment. |
| 111 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth completeAssianor Nerolac make including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment. |
| 112 | Distempering with dry distemper of approved brand and manufacture (two or more coats) of required shade on new work, over and including water thinnable priming coat to give an even shade.Assianor Nerolac make including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment. |
| 113 | Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specificationsTwo or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of Special primer applied @ 0.75 ltr /10 sqmAssianor Nerolac make including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment. |
| 114 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shadeNew work (two or more coats) over and including water thinnable priming coat with cement primerAssianor Nerolac make including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment. |
| 115 | Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additivesNew work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and includingpriming coat of exterior primer applied @0.90 litre/10 sqm.Assianor Nerolac make including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment. |
| 116 | Finishing walls with Acrylic Smooth exterior paint of required shade New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)Assianor Nerolac make including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment. |
| 117 | Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone - III) : 6 graded stone aggregate 20 mm nominal size) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment. |
| 118 | Providing and laying water proofing treatment to vertical and horizontal surfaces of depressed portions of W.C., kitchen and the like consisting of:(i) Ist course of applying cement slurry @ 4.4 kg/sqm mixed with water proofing compound conforming to IS 2645 in recommended proportions including rounding off junction of vertical and horizontal surface.ii) IInd course of 20 mm cement plaster 1:3 (1 cement : 3 coarse sand) mixed with water proofing compound in recommended proportion including rounding off junction of vertical and horizontal surface.(iii) IIIrd course of applying blown or residual bitumen applied hot at 1.7 kg. per sqm of area(iv) IVth course of 400 micron thick PVC sheet. (Overlaps at joints of PVC sheet should be 100 mm wide and pasted to each other with bitumen @ 1.7 kg/sqm) Grading roof for water treatment withcement conc 1:2:4 (1cement:2 sand :4 graded stone agg 20mm nominal size l including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment. |
| 119 | Grading roof for water treatment withcement conc 1:2:4 (1cement:2 sand :4 graded stone agg 20mm nominal size upto floor all level including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment. |
| 120 | Providing and fixing 4mm (four millimetre) thick Alluminium Composite panel(ACP) inceiling with butt jointing and nails (frame work andcover fillets to be measured and paid for separately) including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment. |
| 121 | Making khurras 45x45 cm(forty five into forty five centimetre)with average minimum thickness of 5 cm cement concrete 1:2:4 (one cement : two coarse sand : four graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm (twelve millimetre) cement plaster 1:3 (one cement : three coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment. |
| 122 | Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm ( one hundred millimetre)sand cast Iron P or S trap, 10( ten) litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required:White Vitreous china Orissa pattern W.C.pan of size 580x440 mm ( five hundred eighty into four hundred forty) with integral type foot rests Hindware /Cera(Universal Pan No. 2071) including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 123 | Providing and fixing white vitreous china pedestal type water closet (European type) of size 385 x 675 x 780 mm with white solid plastic soft closing seat and lid of Jaquar (ECS-WHT-7751SS+ECS-WHT-201) /Hindware Snow White Shade ,10 (ten )litre low level white vitreous china flushing cistern and C.P. flush bend with fittingsand C.I. brackets, 40 mm ( forty millimetre) flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 124 | Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, Jaquar, Jal,HINDWARE,PARRYWARE, make) shape, size and pattern including integrated white vitreous china cistern of capacity 10 (ten) litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap,including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 125 | Providing and fixing White Vitreous China wash basin ( CNS-WHT-705 )ofSize (mm) 200 x 595 x 420 with C.I. brackets, 15 mm CP Brass single hole basin mixer of Jaquar (CON-CHR-167B) / Hindware 32 mm (thirty two millimetre)C.P. brass waste of standard pattern , including painting of fittings and brackets, cutting and making good the walls including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 126 | Providing and fixing white vitreous china pedestal for wash basin completely recessed at the back for the reception of pipes and fittings of Jaquar Parryware, Hindware makeincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 127 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.32mm diaof Hindware or Cera make including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 128 | Providing and fixing 600x450 mm(six hundred into four hundred fifty millimetre) beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers completeof Hindware or Cera makeincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 129 | Providing and fixing C.P Brass towel rail (ESSCO - AEC-1111) complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600 mm ( six hundred millimetre)long towel rail with total length of 645 mm ( six hundred forty five millimetre)width 78 mm ( seventy eight millimetre) and effective height of 88 mm ( eighty eight millimetre)heavy duty of Hindware/ Cera/ Jaquar make including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 130 | Providing and fixing 600x120x5 mm six hundred into one hundred twenty intofive millimetre) glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete.of Hindware or Cera makeincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 131 | Providing and fixing CP soap Dish Holder having length of 138mm,( one hundred thirty eight millimetre )breadth 102mm ( one hundred two millimetre )height of 75mm ( seventy five millimetre)with concealed fitting arrangements, weighing not less than 106 gms. ( one hundred six six gram)ofJaquar (ACN-1171N)/Hindware Make including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 132 | Providing and fixing CP, push cock of approved quality and colour15 mm nominal bore, 98 mm long, weighing not less than 75 gms including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 133 | Providing and fixing 15mm ( fifteen millimetre)dia C.P. brass bibcock with wall flange of approved quality conforming to IS standards and weighing not less than 810 gms. (eight hundred ten gram) ofJaquar ( CON-047KN) /HindwareMake including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 134 | Providing and fixing 15mm ( fifteen millimetre)dia C.P. brass long nose bib cock with wall flange of approved quality conforming to IS standards and weighing not less than 810 gms. (eight hundred ten gram) ofJaquar (CON-CHR-107KN)/Hindware Make including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 135 | Providing and fixing 15mm (Fifteen millimetre) nominal bore C.P. brass stop cock for basin mixer and geyser points of approved quality conforming to IS:8931 ofJaquar ( CON-CHR-059KN)/Hindware Make including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 136 | Providing and fixing uplasticised PVC connection pipe with brass unions 45cm length 15mm nominal bore Cera/Jaguar Finolex or hindware Make including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 137 | Providing and fixing brass full way valve with wheel 15mm sizeZindal /Tata make including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 138 | Providing and fixing brass full way valve with wheel 20 mm sizeZindal /Tata make including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 139 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete 15 mm (fifteen millimetre size Zindal /Tata make including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 140 | Providing and fixing furrule including boring and taping the main 15mm nominal bore.Tata/zindal make including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 141 | Making connection of galvanised steel distribution branch with galvanised mild steel main 20mm to 40 mm nominal bore by providing and fixing tee i/c cutting and threading the pipes complete including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 142 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kgWith common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5 including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 143 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone- III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone- III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard designInside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) :With common burnt clay F.P.S. (nonmodular) bricks of class designation 7.5including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 144 | Providing and fixing square-mouth S.W. gully trap classSP-1 complete with C.I. grating brick masonry chamberwith water tight C.I. cover with frame of 300 x300 mmsize (inside) the weight of cover to be not less than 4.50kg and frame to be not less than 2.70 kg as perstandard design square mouth trap 100m x100mm size P-typeWith common burnt clay F.P.S. (nonmodular) bricks of class designationincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 145 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall Zindal /Tata make:15mm nominal size including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 146 | Providing and fixing G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe, including painting with anti corrosive bitumastic paint, cutting chases and making good the wall Zindal /Tata make 20mm nominal size including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 147 | Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etc.16mm nominal sizeof Kitic makeincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 148 | Providing and fixing Polyethelene-AluminiumPolyethelene PE-AL- PE Composite Pressure Pipes conforming to IS - 15450, U.V. stabilized with carbon black having thermal stability for hot & cold water supply, capable to withstand temperature up to 80°C, including all special fittings of composite material (engineering plastic blend and brass inserts wherever required) e.g. elbows, tees, reducers, couplers & connectors etc., with clamps at 1.00 metre spacing. This includes the costs of cutting chases and including testing of joints complete as per direction of the engineer in charge.Concealed work, including cutting chases and making good the wall etc.20mm nominal sizeof Kitic makeincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 149 | Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in C.P. brass, including painting of fittings and cutting and making good the walls and floors wherever required :Range of twohalf stall urinals with 10 litre P.V.C. automatic flushing cistern including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 150 | Providing and fixing C.PBrass toilet paper holder of ESSCO ( AEC-ESS-1151N)including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 151 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Sintex make of 1000 litre capacity each or as direction of the Engineer-in- chargeincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 152 | Providing and fixing 15mm (fifteen millimeter) nominal dia CP Brass Single lever telephonic wall mixer of quality and make Jaquar, Kingston, Gem, Parko, Techno as approved as per the direction by the Engineer in charge completeincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 153 | Providing and fixing 8 mm (eight millimetre) dia C.P. / S.S. Jet with flexible tube upto 1.00 (one)metre long with S.S. triangular plate to Eureopean type W.C. of quality and make ( Jaquar/Cera/Hindware) including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 154 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipesSupreme/finolex/Kitchmakeconforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.75mmnominal sizeincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 155 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipesSupreme/finolex/Kitchmakeconforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes.150mmnominal size |
| 156 | Providing and fixing UPVC floor trap of self cleansing design with screwed down or hinged grating with or without vent arm complete, Supreme/finolex/Kitchmake including cost of cutting and making good the walls and floors trap100 mm inlet and 75 mm outlet including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 157 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes Supreme/finolex/Kitchmake conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Single tee with door 110x110x110mm including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 158 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes Supreme/finolex/Kitchmake conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Single tee without door110x110x110 mm including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 159 | Providing and fixing in cast iron cover with frame for manholes 60cmx45cm (Sixty centimetres into forty five centimetres) light duty weight not less than 50kg (Fifty kilogramme) including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 160 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes Supreme/finolex/Kitchmake conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion Single pushfit Coupler 110mm nominal size including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 161 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes Supreme/finolex/Kitchmake conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion cupper 110mm nominal sizeincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 162 | Providing M.S. foot rests including fixing in manholes with 20x20x10 cm (twenty into twenty into ten centimetre cement concrete blocks 1:3:6 (one cement : three coarse sand : six graded stone aggregate 20 mm nominal size) as per standard designWith 20x20 mm(twenty into twenty millimetre) square barincluding entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 163 | Excavating trenches of required width for pipes, cables, etc including excavation for sockets, and dressing of sides, ramming of bottoms, depth upto 1.5 m, including getting out the excavated soil, and then returning the soil as required, in layers not exceeding 20 cm in depth, including consolidating each deposited layer by ramming, watering, etc. and disposing of surplus excavated soil as directed, within a lead of 50 mPipes, cables etc. exceeding 80 mm dia. but not exceeding 300 mm dia including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 164 | Providing and laying cement concrete 1:5:10 (one cement : five coarse sand : ten graded stone aggregate 40 mm nominal size) up to haunches of S.W. pipes including bed concrete as per standard design :100mm dia including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
| 165 | Providing and fixingDivision plate for urinals 600mmx300mm(six hundred into three hundred millimetre) viterious china. Cera/Hindware, Parryware, Sanitaryware, Neycer,Make,including entire carriage of material within all leads and lifts and other incidentialsas per the direction by the Engineer-in-charge .The rates are inclusiveoctroi, royality,malkana ,toll tax,sale tax GST,labour cess or other taxes imposed by theGovernment |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
