|
| 1 | Earth Work in excavation in trenches for foundation and pipes cables etc in ordinary soil (loan clay or sand ) including lift upto 1.5 mtr. , lead upto 50 mtr and dressing of sides and ramming of bottom and disposal of surplus excavated earth as directed by the Engineer - in - charge with in a lead of 50 mtr . (including royalty ). PWD-251 |
| 2 | Providing and laying in cement concrete 1:4:8 (1 Cement :4 Fine sand :8 Brick Ballast 40 mm nominal size) and curing complete, including cost of form-work , in foundation and floors. (PWD-274) |
| 3 | M-150 class brick work with (1:6) cement : Coarse sand , mortar in foundation and plinth . S.I. No. 303 |
| 4 | Earth work in cutting or in enbankment in ordinary soil excavated to be in the form of regular pits not exceeding 0.50 m in depth and earth work in enbackment to be in 20 cm layers including ramming and also including 1.50 m lift and 30 m lead (with 5.00 km cartage) in embackment wih cartage up to 5 km (SINo. 253+253b) as per attacted analysis AR-1 |
| 5 | supply and filling of sand in under floor … complete item SI no. 255 |
| 6 | R.C.C. Work with cement approved coarse sand and 2 cm. (3/4\") guage approved stone ballast in the proportional1:1.5:3 ( 1 Cement :1.5 coarse sand :3 grit ) in lintels of doors and windows excluding supply of reinforcement and its fixing and bending but incluing its fixing and binding the same necessary with 24 BWG binding wire and including necessary centring and shuttering etcand also including supply of all materials , labour and tools and plants etc , required for proper completion of the works.(S I. No.-289) |
| 7 | M.S. (tor steel or plain ) in plain work in such as RCC or R.B. work including cutting and bending for proper shape as necessary including supply of all steel and wastage , bend, hooksauthorised overlapping shall be measured complete item SI 504 |
| 8 | Steel work in built up tubublar (round, squaer or rectangular hollow tubes etc.) truses etc. Inciuding cutting hosting fixing in position and applying a priming coat of approved steel primar, including welding and bolted with special shaped washer etc complete |
| 9 | S/F of M.S anchor bolt with nut 20mm dia&600mmlong . Market rate |
| 10 | Providing and fixing precoated galvanised iron profile sheets (size shape and pitch of corrugation as approved by Engineer in charge) 0.62mm total coated thickness with zinc coae ting 120gm per sqm as per IS277, in 240mpa steel grade5-7 micron epoxy primer on both side of the sheet and polyster top coat 15-18 micron sheet should have protective guard film of micron minimum to avoid scratches during transportation and should be supplied in single length up to 12 meter or as desired by Engineer in charge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x55mm) vertical or curved surfaces, excluding the cost of purlins ,rafters and trusses and including cuttinf to size and shape wherever required . SI- 536/ roof work |
| 11 | supply and laying of I shaped precast interlocking tiles of thickness 60 to100 mm (compresive strengh not less than 30 mpa and weight 4.5 kg ) including 25 mm thick local sand base lavelling and dressing of surface to required level and slope filling joints with local sand all complete work . for 80 mm ordinary coloured S.I. No. 33/road work |
| 12 | 12mm thick plaster with 1:4 Cement : Coarse sand on wall complete item . S.I. No.3/13-1/plaste and pointing -13 |
| 13 | finishing wall withputty on new surface with approved quality of burger /jk/birla or similar make in two coats S I no. 31 New. |
| 14 | Painting on new iron work in two coat with one coat priming with approved superior quality ready mix synthetic enemel paint including supply of all material and labour etc. required for proper completion of work . Truss & bench |
| 15 | Finishing of wall with deluxe multisurface paint @ 1.25 ltr. Per 10sqm of approved brand and manufacture and of required shade on undecorated wall surface to give even shade over including curing and cost of material,labour,T&P etc. |
| 16 | Supply and fixing of 3 m retro sign board …… complete. |
| 17 | Fixing of M ,S sitting bench in proper position and grouting of legs with concrete … complete. |
| 18 | Transportation charge |
| 19 | Generator charge with cartage charge. |
