Tender For Supply Of Raw Material And Fabrication And Erection Of, kalpakkam-Tamil Nadu

Supply Of Raw Material And Fabrication And Erection Of Supply Of Raw Material And Fabrication And Erection Of Work Station And Full Height Partition In Existing Temporary Structure In Augf, Mpdd, Barc Facilities ( K ) - Providing And Fixing Anodized Aluminium ( Anodized Transparent Or Dyed To Required Shade According To Is:1868 Minimum Anodic Coating Of Grade Ac 15 ) Workfor Doors, Windows, Ventilators And Partitions, Aluminium Handleswith Extruded Built Up Standard Tubular Sections / Z Sections And Other Sections Of Approved Make Conforming To Is:733 And Is:1285 Fixed With Rawl Plugs And Screws Or With Fixing Clips Or With Expansion Hold Fasteners Including Necessary Filling Up Of Gaps At Junctions, At Top, Bottom And Sides With Required Pvc / Neoprene Felt Etc.Aluminium Sections Shall Be Smooth, Rust Free, Straight, Mitered And Jointed Mechanically Wherever Required Including Cleat Angle, Aluminium Snap Beading For Glazing / Paneling, C.P Brass / Stainless Screws All Complete As Per Architectural Drawings And Directions Of Engineer-In-Charge Includingsupplying, Providing And Fixing Hinges / Pivots And Fittings Wherever Required., ( Glazing And Paneling Shall Be Paid For Separately ) Bronze Color Anodized Minimum 15 Micron Thickness. Note: 1 ) The Rates For Aluminium Are Inclusive Of All Fasteners Required For Fabrication And Fixing In The Walls.2 ) All Joints Shall Be Of Mitre Joints. 3 ) A Long M.S Rod Threaded At Both Ends To Be Provided In All Aluminium Door Shutters In Top & Bottom Horizontal Members Internally Connecting Vertical Members And Fixed With M.S Washers & Nuts. 4 ) Only Aluminium Members Alone Shall Be Measured And Paid For. 5 ) Contrator Shall Prepare Detailed Schematic And Fabricationdrawings Along With Aluminiumextruded Sections To Be Usedetc And Obtain Approval Before Procurement. 2 Providing And Fixing Glazing With 5Mm Thick Clear Float Glass Pane With 4Mil Frosted / Textured Pvc Sheet On One Side In Aluminium Doors And Partitions Etc With Neoprene Gasket Including Cost Of Neoprene Gasket Complete As Per The Drawings And Directions Of The Engineer-In-Charge. 3 Providing And Fixing 12Mm Thick Prelaminated With Decorative Lamination On Both Sides, 3 Layer Medium Density ( Exterior Grade ) Particle Board Grade-I, Type - Ii Confirming To Is: 12823 Bonded With Phenol Formaldehyde Synthetic Resin Of Approved Brand And Manufacture In Paneling Fixed In Aluminum Doors, Partition Frames With C.P Brass / Stainless Screws Etc. Complete As Per Drawings And As Directed By Engineer-In-Charge. 4 Providing And Fixing 4 Lever Dead / Mortice Lock ‘Godrej / Everite’ Or Other Approved Equivalent Make Suitable For Aluminium Door With A Pair Of Keys Complete All As Per Specification And Drawings. 5 Providing And Fixing Is: 3564 Marked Al Die Cast Body Tubular Type Universal Hydraulic Door Closer With Necessary Accessories And Screws Etc. In Wooden Doors / Steel Doors With Necessary Bolts & Nuts Everite / Hardwyn Or Approved Equivalent Make Complete As Per Specifications And As Directed By The Engineer-In-Charge. 6 Designing, Fabricating, Supplying And Fixing Modular Workstation ( Cubicles ) In Augf Office Area As Per Following Specifications. ( I ) Partitions Of Size 75Mm Thick And 1200Mm Height Made Of Powder Coated Aluminium Extruded Sections Frame Work , ( Ii ) Panels Shall Be Installed On Both Side Of Aluminium Frame And Shall Be Of Prelaminated Particle Board Having Provision For Running Power & Data Cables ( Universal Cabling System ) This To Be Fixed Or Mounted With Sturdy Supports With In Cavity Of Panels.100 Height Skirting To Be Provided At The Bottom Of Partitions As Per Tender Technical Document Sectionv Point 4.Note: Area Mentioned In Schedule Of Qty Is Area Of Partition Wall Of Cubicle. Contractor Shall Provide Design&Fabrication Drawings For Approval. Sample Materials Like Boards, Shades, Hardware’S Etc., Shall Be Approved By The Engineer In Charge. 7 Manufacturing And Fixing Work Station ( Intigrated Table ) With Top Of 25 Mm Thick Mdf & Other Panel Section Of Minimum 18 Mm Thick Prelaminated Particle Board With Edge Bands. Table Top Shall Be Suitably Supported On Aluminum Frame To Ensure Minimum 300 Kgs Load Bearing Capacity As Per Tender Technical Document Section V Point 4. Note: ( 1 ) Best Quality Hardware’S And Particle Board To Be Used. ( 2 ) Each Work Station Shall Be Fixed With A Key Board Tray ( Supported On Telescopic Sliding Channel Of Reputed Make. Capable Of Taking At-Leat 30 Kg Load ) , Cpu Trolly. Contractor Shall Provide Design & Fabrication Drawings For Approval. Sample Materials Like Boards, Shades, Hardwares Etc., Shall Be Approved By The Engineerin Charge. Work To Be Executed With Experienced Agency. 8 Manufacturing And Fixing In Position Mobile Pedestal Type Drawer Unit Of 400Mm X 450 Mm X 650 Mm Height With 2 Nos Of Drawers& A Filing Unit Made Of 18 Mm Thick Prelaminated Particle Boards And Edge With Matching Edge Bands. Were In All Drawers And Filing Cabinet Shall Be Supported On Telescopic Sliding Channelas Per Specification Mentioned In Tender Document Section V Point 4 9 Supply And Erection Of 3X4 Feet White Board In Room Fabricated From Full Height Partition As Per Specification Mentioned In Tender Document Section V Point 4

Refer document

INR 25376.0 /-

INR 12.68 Lakhs /-