Tender For Supply Of Materials Of Mgnrega Works For Birpara I Gram Panchayat (2Nd Call), madarihat-West Bengal

Supply Of Materials Of Mgnrega Works For Birpara I Gram Panchayat ( 2Nd Call ) --- 1 Brick Aggregate (single size):40 mm nominal size 2 Tor Steel Rods/HYSD bars/TMT bars(SAIL/TATA/RINL) (Fe415/Fe500/Fe500D conforms to IS: 1786) 3 Tor Steel Rods/HYSD bars/TMT bars(JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL)(Fe415/Fe500/Fe500D conforms to IS: 1786) 4 Tor Steel Rods/HYSD bars/TMT bars (Other than Sail/TATA/RINL/JSW/JSPL/SHYAM/SRMB/BMASL/ELECROSTEEL/SSL)(Fe415/Fe500/Fe500D conforms to IS: 1786) 5 1st class picked Jhama Bricks(Traditional) 6 1st Class traditional Bricks (kiln burnt) 7 G I wire 8 Portland Cement 9 Stone Aggregate(single size):63 mm nominal size 10 Stone Aggregate(single size): 40 mm nominal size 11 Stone Aggregate(single size):20 mm nominal size 12 Stone Aggregate(single size): 10 mm nominal size 13 Fine Sand 14 Medium Sand 15 Coarse Sand 16 Stone Screening Type A (13.2 mm) 17 Stone Screening Type B (11.2mm) 18 River bed material 19 Silver sand 20 Good earth carrage 21 Good quality fine sand supply 22 Stone boulder( 225 mm above ) 23 Stone boulder ( 225mm-150mm ) 24 Sausage Wire Net 25 Fencing Post 215 cm 150 mm X 150 mm section at bottom, 100 mm X 100 mm section at top with T-Base 300 mm X 150 mm X 100 mm, having 4 nos 6 mm dia vertical M.S. reinforcement and 6 mm dia binders @ 200 mm centres, finished smooth 26 RCC pipe 600 mm dia NP- 3 spigot 27 RCC pipe 900 mm dia NP - 3 spigot 28 RCC pipe 1000 mm dia NP -3 spigot 29 RCC pipe 1200 mm dia NP - 3 spigot 30 RCC pipe 1800 mm dia NP- 3 spigot 31 RCC pipe 600 mm dia NP- 4 spigot 32 RCC pipe 900 mm dia NP- 4 spigot 33 RCC pipe 1000 mm dia NP- 4 spigot 34 RCC pipe 1200 mm dia NP- 4 spigot 35 RCC pipe 1800 mm dia NP- 4 spigot 36 R.C.C ventilator of 20 mm. thick Upto 0.10 sq.m. area 37 R.C.C ventilator of 20 mm. thick above 0.10 sq.m. area 38 Coloured inter locking C.C. paver Block 39 Udaypur marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m 40 Chawk dungri marble slab ( for floor, lobby etc) 18 mm thick of size 0.3 sq m to 0.6 sq m 41 Udaypur marble slab ( for Wall/Dado) 18 mm thick of size 0.3 sq m to 0.6 sq m 42 Chawk dungri marble slab ( for Wall/Dado) 18 mm thick of size 0.3 sq m to 0.6 sq m 43 18 mm thick marble partition slab for urinals including fitting fixing (with Chawk Doongri marble) 44 Hire charges of Concrete Mixer 0.25 to 0.40 cum with Hopper 45 Hire charges of Diesel Road Roller- 8 to 10 tonne 46 Hire charges of Pump set of capacity 4000 litres/hour 47 Vibrator (Needle type 40 mm) 48 pin vibrator 49 Surface Vibrator 50 Generator 250 KVA 51 Water tanker 5000 Ltr. Capacity 52 Bamboo 53 Water Tanker 5 to 6 KL Capacity 54 Generator 250 KVA 55 Generator 100 KVA/125 56 Hire charges for 5 HP with operator,fuel and shifting etc all charges complete 57 Bamboo (8cm-10cm dia) including fixing 58 Eucalyptus Bullah (7.5cm -10cm dia) 59 Eucalyptus Bullah (12.5cm -15cm dia) 60 Eucalyptus Bullah (17.5cm -20cm dia) 61 Sal Bullah (7.5cm -10cm dia) 62 Sal Bullah (12.5cm -15cm dia) 63 Sal Bullah (17.5cm -20cm dia) 64 Empty Gunny Bag 65 Hire charges of Shuttering plank (25mm-30mm thick) with Prop including all fittings 66 Hire charges of Shuttering plank (25mm-30mm thick) without Prop including all fittings 67 Hire charges of Shuttering plank (above 30mm-37mm thick) with Prop including all fittings 68 Sal Silliguri 69 Sal Malaysia 70 Neem wood 71 Other Local Wood 72 Ordinary Teak wood 73 Sisu/Gamar wood 74 Local Sal Wood 75 C.I. Grating 100x100 mm 76 Mirror of superior make glass 60x45 cm 77 vitreous china pedestal for wash basin 78 Slotted cowl (terminal guard) 75 mm dia 79 Slotted cowl (terminal guard) 100 mm dia 80 White plastic seat (solid) with lid C.P. brass hinges and rubber buffers 81 Shower rose C.P brass for 15 to 20 mm intel 100 mm dia 82 Shower rose C.P.brass for 15 to 20 mm intel 150 mm dia 83 Vitreous china squatting plate urinal 84 H.P. or L.P. ball valve with polythene floats: 15 mm dia 85 H.P. or L.P. ball valve with polythene floats: 20 mm dia 86 H.P. or L.P. ball valve with polythene floats: 25 mm dia 87 Vitreous China flat back wash basin 630x450 mm 88 Vitreous china angle back wash basin 400x400 mm 89 Vitreous china flat back wash basin 550x400 mm 90 Vitreous china flat back wash basin 450x300 mm 91 Oxidised M.S. casement stay (straight peg type) 300 mm not less than 0.33 kg 92 Coloured Orissa pattern W.C. pan 580x440 mm 93 Coloured Pedestal type W.C. pan 580x440 mm (European type) 94 Circular shape 450 mm dia precast R.C.C. manhole cover with frame L.D. -25 95 uPVC pipes (working pressure 4 kg/cm 2) Rubber(seal) Ring 75 mm dia 96 uPVC single equal Tee (without door) 75x75x75 mm 97 uPVC single equal Tee (without door) 110x110x110 mm 98 uPVC single equal Tee (with door) 75x75x75 mm 99 uPVC single equal Tee (with door) 110x110x110 mmmm 100 uPVC bend 87.50, 75 mm bend 101 UPVCbend 87.50, 110 mm bend 102 C.P.Brass bibcock 15 mm 103 C.P. Brass long body bibcock 15 mm 104 C.P. Brass stop cock (concealed) 15 mm 105 Flushing Cistern P.V.C. 10 lts capacity (low level) (white) (with fittings, accessoriesand flush pipe) 106 White vitreous china clay half stall urinal flat back 580x380x350 mm or angle back 450x375x350 mm with waste fittings as per IS: 2556 107 15 mm PTMT bib cock 108 PTMT pillar cock 109 PTMT push cock 15 mm dia 110 PTMT - Liquid Soap Container of 400 ml capacity 111 32 MM dia polythene flush pipe 112 Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar brand). 113 Chromium plated angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). 114 Polythene Bib Cock / Stop Cock (HD) with metal/plasticinlet (EMCO / ATLAS or equivalent) 115 Sink 630 mm X 550 mm X 180 mm with waste fittings and two coats of painting of C.I. brackets 116 Supplying, fitting and fixing pillar cock of approved make CP Pillar Cock - 15 mm equivalent to Code No. 507 & Model Tropical / Sumthing Special of ESSCO or similar brand. 117 15 mm swan neck tap with left & right hand operating nob with aerator (Equivalent to Code No. 510, 510(A) and Model - TROPICAL / SUMTHING SPECIAL of ESSCO or similar brand). 118 P.V.C. CONNECTOR 15 mm dia 600 mm long 119 Polythene waste fittings complete 32mm 120 Waste pipe, with PVC coupling at one end fitted with necessary clamps 900 mm long 121 Towel rail (CP over brass )- 600 mm 122 Two point nose steel handle 123 C.P. over brass Waste fittings 32 mm 124 UPVC Plain Y 110 mm dia 125 Shower jet 126 Corner Urinal 127 Check valve 32mm 128 Check valve 40mm 129 Check valve 50mm 130 Reducing socket 20mm x 15mm 131 Reducing socket 25mm x 20mm 132 Reducing socket 25mm x 15mm 133 Reducing Elbow 25 mm x 20 mm 134 Adhesive solvent cement 135 G.I. pipes 15 mm dia 136 G.I. pipes 20 mm dia 137 G.I. pipes 25 mm dia 138 G.I. pipes 32 mm dia 139 G.I. pipes 40 mm dia 140 G.I pipes 50 mm dia 141 G.I. pipes 65 mm dia 142 G.I. pipes 80 mm dia 143 uPVC pipes (working pressure 4 kg /cm2 ) Single socketed pipe 75 mm dia 144 uPVC pipes (working pressure 4 Kg / cm2 ) Single socketed pipe 110 mm dia 145 Chlorinated Polyvinyl - Chloride (CPVC) pipe 15 mm outer dia 146 Chlorinated Polyvinyl - Chloride (CPVC) pipe 20 mm outer dia 147 Chlorinated Polyvinyl - Chloride (CPVC) pipe 25 mm outer dia 148 Chlorinated Polyvinyl - chloride (CPVC) pipe 32 mm outer dia 149 Chlorinated Polyvinyl - chloride (CPVC) pipe 40 mm outer dia 150 Chlorinated Polyvinyl - chloride (CPVC) pipe 50 mm outer dia 151 Coloured Pedestal type W.C. pan 580x440 mm (European type) S Trap 152 GI pipe 32 mm dia medium quality for UNDERGROUND WORKS 153 GI pipe 40 mm dia medium quality for UNDERGROUND WORKS 154 CPVC (Chlorinated Polyvinyl Chloride) pipes (15 mm dia) [For Concealed Work] 155 CPVC (Chlorinated Polyvinyl Chloride) pipes (20 mm dia) [For Concealed Work] 156 CPVC (Chlorinated Polyvinyl Chloride) pipes (25 mm dia) [For Concealed Work] 157 UPVC Plain Y 75 mm dia 158 Vitreous china foot rests 250x125x25 mm 159 Polyethylene water storage tank with cover and suitable locking arrangemnet 160 Nail 161 Polythene sheet (150 gm per sqm) 162 Jute rope 163 Coconut rope 164 Poly rope 165 Glue 166 Green or blue medium shade pigment 167 Coal Tar 168 Synthetic enamel paint, having VOC ( Volatile Organic Compound content less than 150 gm/liitre 169 Ready mixed pink or grey primer on wood work(hard and softwood)having VOC content less than 50 gms/litre 170 Water thinnable cement primer for interior wall surface, having VOC content less than 50 gms/litre 171 Black Japan 172 Synthetic enamel paint in black or chocolate shade 173 Superior copal varnish 174 Red oxide Zinc chromate primer 175 Acrylic exterior paint 176 Bright finished or black enameled mild steel butt hinges 50x37x 1.50 mm 177 Bright finished or black enameled mild steel butt hinges 75x47x 1.70 mm 178 Bright finished or black enameled mild steel butt hinges 100x58x 1.90 mm 179 Fan Hook 180 Unslaked lime 181 Coal Tarring 182 Thermocol 12.5 mm thick. 183 Fixed type ventilators as per I.S. sizes with horizontal glazing bars height being limited to 580 mm 184 fitting and fixing glass reinforced polyester translucent fiber glass sheet 185 Supplying solid flush type doors of commercial quality 186 MS Integrated grill for steel window and ventillator 187 Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window 188 Supplying, fitting & fixing of partly glazed partly paneled or fully glazed single leaf Aluminium swing door 189 Supplying, fitting & fixing of Aluminium fixed partition wall of all aluminium sections 190 FRP composite door frame 66mm x 70mm 191 FRP composite door frame 66mm x 90mm 192 Supplying, fitting & fixingAsbestos ridging 193 Supplying, fitting & fixingAluminium sheet ridging 194 fitting and fixing glass reinforced polyester translucent ridging 195 Grill weighing above 10 Kg./sq.mtr and up to 16 Kg./sq. mtr. 196 Rolling shutter made of 80x1.25 mm machine rolled laths 197 Wire mesh (rabbit) 198 Collapsible gate 199 1.5 mm thick ms sheet 200 Openable steel windows as per IS sizes with side hung shutters and horizotal glazing bars. 201 top hung side hung ventillator 202 False ceiling(with 4mm thick Pearl Designer Fibre Cement Board) 203 Supplying, fitting & fixingAsbestos corrugatedsheet(6 mm thick) 204 Supplying, fitting & fixing Zn-Al alloy steel sheet work In Roof 205 fitting & fixing circular corrugated Aluminium sheet 206 M.S. structural works in roof trusses with tubular sections conforming to IS: 806-1968 & IS: 1161- 1998 (trusses spanning up to 12.00 m) 207 M.S. structural with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998)Span up to 12 Mtr 208 Display Board ( IBS) as per specificatrion 209 Display Board ( Community) as per specificatrion

Refer document

INR 38857.0 /-

INR 19.43 Lakhs /-