Kerala State Electricity Board-KSEB has published Tender For Laying 1.5 Km Double Run 11 Kv Ug Cable From Thykoodam Border Ab To Airtel Dpalong Nhai Service Road Under Electrical Section Maradu. Submission Date for this Tender is 29-12-2022. Cable Laying Tenders in maradu Kerala. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Mounting and connecting HT XLPE UG cable ends of all sizes uptoand including 3x300 sq mm with special type cable clamps, bolts, 3x300 sq mm with special type cable clamps including cost of nuts, terminal protectorsetc.includingcostofextramaterialsif needed and giving necessary jumper connections. |
2 | Doing onecableendterminationon cablesofsizesbeyondbeyond 3x185 sqmm and upto and including 3x300 sq mm usingthe cable end kit supplied departmentally after making fencing,caution board and all other safety measures including charges for cable jointer etc. complete as per the direction of the departmental officers. |
3 | Doing straight joint on cables of sizes beyond 3x185 sqmm and including 3x300 sq mm using the cable jointing kit supplied departmentally as per specification after providing proper traffic signalling and caution board fencing etc. wherever necessary, including charges for cable jointer and other sundries etc. as per the direction of departmental officers at site. |
4 | Fitting one LT 4 line cross arm on HT or LT existing poles incl fitting insulators and binding the same with LT line |
5 | Fitting one additional HT Pin with insulator |
6 | Renewing one 11 KV Jumper connection using Copper/ACSR conductor as per standard specification |
7 | Providing one earth using earth pipe incl. Digging & backfilling pit and supply of charcoal,salt,sand etc |
8 | Additional rate for excavation of one earth pit(2.5 m depth) in hard laterite |
9 | Horizondal directional drilling methodalong/ across roads,supplying and pulling 110mm HDPE pipe duct drawing 11kV 3x300Sq mm Aluminium XLPE UG cable through the ductincluding surveying the site for collecting information about under ground utility installations and other obstructions using suitable modern sensing equipments, restoring the damages occurred if any,pit making, pilot drilling, pre reaming, closing of pits with normal soil/filled sand/crusher sand and consolidation to the satisfaction of the road ownerand traffic policeas they insist, taking the cable to the open trenches, RMUs, transformer yardsetc., mounting the cable after providing loop at 1.2m depth , putting HDPE(PE-63,4Kg/sq cm) at rising point(0.5 m below ground level and 1.5m above ground level) making RCC jointing chambers for straight joints if any, testing commissioning, placing route markers at 100m interval, writing identification name ,date of laying ,date of commissioning etc. legibly on the cable risingusing polyurathane paint etc. as per the direction of departmental officers, providing with as built laminated cable route drawing, marking the HDD pits, distance of pits from the boundary of the road, length of the cable bit etc. including the cost of all materials, labour and hire charges, conveyanceetc. complete except the cost of 3 core 300 mm2 XLPE UG cable. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail