Tender For Construction Of Store Room
Tender Value
Ref. Documents
Estimated cost
Bid Submission
26 Dec 2022
0 days left
EMD
29500
Bank guarantee accepted
Document Fee
4610
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
samthar → Uttar Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Store Room Npp Smathar Me Pratham Tal Par Vidhyut Samgri Hetu Store Room Ka Nirman
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Store Room |
| 2 | Dismentling reinforcement cement concrete or reinforcement brick work including stacking of materials as per directed by Engineeer-in charge with in a distance of 3.00 including cartage 3 km from side to disposal area. |
| 3 | Site clearance and devlopment as directed by E/I. |
| 4 | RCC work with cement approved coarse sand, and 2cm (3/4\") gauge, approved stone ballast in the proportion 1:1.5:3 in lintels of doors and windows, excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost. SI. No. 283 (1) |
| 5 | RCC work with cement approved coarse sand, and 2cm (3/4\") gauge, approved stone ballast in the proportion 1:1.5:3 in Slab and shelf, excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost. SI. No. 284 (I) |
| 6 | RCC work with cement approved coarse sand, and 2cm (3/4\") gauge, approved stone ballast in the proportion 1:1.5:3 in coloum, excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost. s.i no -289pg-29 |
| 7 | RCC work with cement approved coarse sand, and 2cm (3/4\") gauge, approved stone ballast in the proportion 1:1.5:3 in heavey beam, excluding supply of reinforcement and its bending but including its fixing and binding the same with 24 B.W.G.I. binding wire, an including necessary cantering and shuttering etc and also including supply of all materials, labour and tools and plants etc. required for proper completion of the work binding wire to be supplied by the contractor free of cost. s.i no -286 |
| 8 | Mild steel or iron work in plain work such as reinforced concrete/brick work (when not included in over all rates) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel, its wastage and hooks, and authorized over lapping shall be measured.SI. No. 504 |
| 9 | Class-150 brick work in 1:4 cement and fine sand of 1.25 fineness modulus mortar in super structure including supply of all materials, labour and tools and plants etc. required for proper completion of the work.SI No. 305. |
| 10 | 12 mm thick plaster on brick work minimum thickness not less than 10 mm with cement mortar in proportion of 1:6 cement and fine sand of 1.25 fineness modulus including supply of all materials, labour and tools and plants etc required for proper completion of the work.SI No.17.58(III) |
| 11 | Painting or varnishing new iron work in small areas or new wood work with one coat (up to one Sq. meter) of ready mixed priming paint and one coat of approved superior quality ready mixed paint or varnish including supply of all materials, labour and tools and plants etc. required for proper completion of the work. Paint to be used should confirm the ISI no. 103-1950.SI No. 641+642 |
| 12 | Finishing wall surface with approved make and quality birla white putty including supply of all material T&P etc required for proper completion of the work |
| 13 | One priming coat and two coat plastic paint on new work including supply of all materials, labour and T&P etc. required for proper completion of work. |
| 14 | P/L (white/coloured) Kajaria tiles, Ramano tiles flooring over 20 mm(av.) thick base of cement mortar 1:4(1cement:4 coarse sand) laid and jointed with white cement (with pigment) slurry including rubbing and polishing complete. (SI no-628) |
| 15 | Supply of (40x40x5) MS angle iron door, frame made of approved MS angle iron wrought to required from including drilling holes, welding and riveting where necessary and also including supply of all material, such as steel hinges of required size, nut and bolts etc and also including all taxes, wastage and one coat of red oxide paint complete in all respect as per direction of Engineer-in-charge for proper completion of work at site of work.New Item 2 of Mild Steel and Iron Work page no -36 pressed steel chowkhat for outer door SI. No. New Item-2 Page No. 36 |
| 16 | Providing & Laying \"brick bat coba\" 100 mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15 mm to each other, over 20 mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with aerelic cement concrete water proofing compound filled gaps of coba & top of cobamortar mixed water proofing compound in 1:4cement and coarse sand mortor finished smooth & top mashed false 30 cm x30cm and side wall parapet shall be monolythic plaster wall upto 30 cm higher and junction and corner shall be rounded by brick ballast cement and coarse sand and masonary cobawith top finishing plaster mixing with acetic water proofing compound @2% by weight & includingsupply of all materials labourT&P etc. required for proper completion of works. etc.(ch-11, SI New item-1) |
| 17 | Making drip coarse in sunshades or facia item as per direction of Engineer-in-charge including supply of all materials labour tools and plants etc. for proper completion of work. SI. No. 598 |
| 18 | supply and fixing of 35 mm thick flush door shutterincluding fixing of wooden cleats and stopper and i adjustment of hinges bolts locks handles spring and other fitting fitting. S.I.No -422 |
| 19 | Supply of approved Z section windows and ventilators excluding cost of glass panes but including supply of all materials, its fabrication nut and bolt, hold fast required labour and tools and plants for proper completion of work as per direction of Engineer-in-charge and also including cost of handles, stays etc and one coat of red oxide paint complete in all respect at site of work. SI. No. New Item Ist Page No. 41 |
| 20 | Fixing panes of 4 mm thick glass with and including Atul or equivalent ISI mark quality putty and brads and spring and including supply of all materials labour and tools & plants, etc. required for proper completion of the work but excluding cost of glass.SI No.812(b) |
| 21 | Supply and fixing 10 mm.(3,8\") thick plaster of paris (Gypsum) anhydrous ceiling including providing Kail or Chir wood frame base consisting of 2\"x 5\" battens at 2\"-6\" apart cross battens of 1 1/2\" x 2\" at1\"-3\" apart & wooden strips 1\" x 1/4\" with 3/8\" gap in between, with rabbit wire mesh reinforcement fixed to wooden frame and applying one coat of solignum paint or other approved wood preservative to wooden frame including cost of all materials, labour and tools and plant etc. required for proper completion of the work.SI-16.35 ch-12 |
| 22 | Supply and fixing Defined Polished Stainless Steel Hand Railing on stair case including cost of all materials, labour and tools and plant etc. required for proper completion of the work. |
| 23 | External water supply and sanitory work & Internal Electrical work |
| 24 | GST Paid Seperatly |
AI Tender Summary
Tender Timeline
Dec 19, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 26, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender