Various Development Works At Delwada, Achalgarh And Arbuda Dham, Mt. Abu ( Sirohi ) - Clearing Jungle Including Uprooting Of Rank Vegetation, Grass, Brush Wood, Trees And Saplings Of Girth Upto 30 Cm Measured At A Height Of 1 M Above Ground Level And Removal Of Rubbish Upto A Distance Of 50 M Outside The Periphery Of The Area Cleared 2 Earth Work In Excavation By Mechanical Means ( Hydraulic Excavator ) / Manual Means Over Areas ( Exceeding 30Cm In Depth. 1.5M In Width As Well As 10 Sqm On Plan ) Including Disposal Of Excavated Earth, Lead Upto 50M And Lift Upto 1.5 M, Disposed Earth To Be Levelled And Neatly Dressed : All Kinds Of Soil 3 Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level.1:4:8 ( 1 Cement : 4 Coarse Sand : 8 Graded Stone Aggregate 40 Mm Nominal Size ) . 4 Random Rubble Stone Masonry For With Hard Stone In Foundation And Plinth In Cement Sand Mortar Above 30 Cm Thick Wall In: Cement Mortar 1:6 ( 1-Cement : 6-Sand ) . 5 Providing And Fabricating Reinforcement For R.C.C. Work Including Straightening, Cutting, Bending, Placing In Position And Binding ( Including Cost Of Binding Wire ) All Complete Up To Floor Five Level. Thermo-Mechanically Treated Bars ( Conforming Of Relevent Is Code ) 6 Centering And Shuttering With Plywood Or Steel Sheets Including Strutting, Propping Bracing Both Ways And Removal Of Formwork For Foundation , Footings, Strap Beam, Raft , Bases Of Columns Etc. 7 Columns, Pillars, Posts And Struts Etc. 8 Suspended Floors, Roofs, Landings, Staircases, Balconies, Girders, Cantilevers, Bands, Coping Bed Plates, Anchor Blocks, Sills, Chhajjas, Lintel, Beam, Plinth Beam Etc. 9 Providing And Laying In Position Specified Grade Of Cement Concrete For All Rcc Structural Elements Upto Plinth Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) And Making Good The Joints And Cost Of Plastizers ( If Required ) Excludingthe Cost Of Centering, Shuttering And Reinforcement. M20 Grade Nominal Mix / Design Mix 10 Random Rubble Dry Stone Kharanja Under Floor. 11 Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level. M15 Grade Nominal Mix 1: 2: 4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 40Mm Nominal Size ) . 12 Filling Available Excavated Earth ( Excluding Rock ) In Trenches, Plinth Side Of Foundation Etc. In Layers Not Exceeding 20 Cm. In Depth, Consolidating Each Deposited Layer By Ramming And Watering Including Lead Up To 50 Meter And With All Lift. 13 Brick Work With F.P.S. Bricks Of Class Designation 75 In Superstructure Above Plinth Level Upto Floor V Level In Allshapes And Sizes In : Cement Mortar 1 : 6 ( 1 Cement : 6 Coarse Sand ) 14 Half Brick Masonry In Superstructure , Above Plinth Level Upto Floor Vlevelusing Bricks Of Designation 75 Cement Mortar 1 : 4 ( 1 Cement : 4 Coarse Sand ) 15 Add Extra Providingand Placing In Position 2 Nos. , 6Mm Ø M.S. Barat Every Thirdcourse Of Half Brick Masonry . 16 Providing And Laying In Position Cement Concrete Including Curing, Compaction Etc. Complete In Specified Grade Excluding The Cost Of Centering And Shuttering - All Work Up To Plinth Level. M15 Grade Nominal Mix 1: 2: 4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate 20Mm Nominal Size ) . 17 Providing And Laying In Position Specified Grade Of Cement Concrete For Rcc Structural Elements Upto Floor Five Level Including Curing, Compaction, Finishing With Rendering In Cement Sand Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) And Making Good The Joints And Cost Of Plastizers ( If Required ) Excluding The Cost Of Centering, Shuttering And Reinforcement For Beams, Suspended Floors, Roofs, Griders Having Slopes Up To 15º, Landings, Balconies, Shelves, Chajjas, Lintels, Bands, Plain Windows Sills, Staircases And Spiral Staircases Etc. M20 Grade Nominal Mix / Design Mix 18 Providing And Laying Cement Concrete Including Curing, Compaction Etc. Complete In Retaining Walls, Return Walls, Walls ( Any Thickness ) Including Attached Pilasters, Columns, Piers, Abutments, Pillars, Posts, Struts, Buttresses, String Or Lacing Courses, Parapets, Coping, Bed Blocks, Anchor Blocks, Plain Window Sills, Fillets, Levelling Course Etc Up To Floor Five Level Excluding The Cost Of Centering And Shuttering. M15 Grade Nominal Mix1: 2: 4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stoneaggregate 20Mm Nominal Size ) . 19 Providing M-25 Grade Concrete By Using Cement As Per Codal Provision Instead Of M-20 Grade Design Mix. 20 Grading Roof For Water Proofing Treatment With Water Proffing Compound Cement Concrete 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Gradedstone Aggregate 20 Mm Nominal Size ) 21 Supply And Fixing Jodhpur Sand Stone Machine Cut Dash, Coping, Sill, Lintel Fixed In Cement Sand Mortar 1:4. 22 Plaster On New Surface On Walls In Cement Sand Mortar 1:6 Including Racking Of Joint Etc. Complete Fine Finish : 23 25Mm Thick. 24 20Mm Thick. 25 6 Mm Thick Cement Plaster To Ceiling Of Mix 1:3 ( 1Cement : 3-Fine Sand ) 26 Providing And Applying White Cement Based Putty Over Plastered Surface To Prepare The Surface Even And Smooth Complete : New Plastered Surface ( Three Or More Coats ) 27 Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade Including All Scaffolding: New Work ( Two Or More Coats ) Over And Including Scrapping And Priming Coat With Cement Primer. 28 Wall Painting With Plastic Emulsion Paint Of Approved Brand And Manufacture To Give An Even Shade Including All Scaffolding: Two Or More Coats On New Work Including Prepartion Of Base With Primer, Putty, Lippy Etc Complete In All Respect. 29 Painting Exterior Surface Of Wall With 100% Acrylic Exterior Paint Of Approved Brand And Manufacture To Give An Even Shade With Two Or More Coats Including Prepartion Of Basewith Sand Papering, Primer, Putty, Etc Complete In All Respect Including Scaffolding And Safety Provision , New Work 30 Providing And Fixing In Cement Sand Mortar 1 : 4 Single Paitam ( Rebated ) Stone Doors Windows And Ventilator Frames Of Approved Quarry :Size 75 X 60Mm 31 Providing And Fixing Stone Jali 40Mm Thick Red / Pink Sand Stone Throughout In Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) Including Pointing In White Cement Mortar 1:2 ( 1 White Cement : 2 Stone Dust ) With An Admixture Of Pigment, Matching The Stone Shade, Jali Patterns To Be Cut Square To Jali Slab Without Any Chamfers Etc: 32 Kota Stone Slab Flooring 25 Mm Thick Over 20 Mm ( Average ) Thick Base Laid Over And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slab Including Rubbing And Polishing Complete With Base Of Cement Mortar 1 : 4 ( 1 Cement : 4Coarse Sand ) For Area Of Each Slab From 901 To 2000 Sq.Cm : 33 Kota Stone Slabs 25 Mm Thick In Risers Of Steps, Skirting, Dado And Pillars Laid On 12 Mm ( Average ) Thick Cement Mortar 1:3 ( 1 Cement 3 Coarse Sand ) And Jointed With Grey Cement Slurry Mixed With Pigment To Match The Shade Of The Slabs, Including Rubbing And Polishing Complete : For Area Of Each Slab Upto 2001 Sqcm 34 Providing And Fixing Stainless Steel Railing Made Of Hollow Tubes, Channels, Plates Etc., Including Welding, Grinding, Buffing, Polishing And Making Curvature ( Wherever Required ) And Fitting The Same With Necessary Stainless Steel Nuts And Bolts Complete, I / C Fixing The Railing With Necessary Accessories & Stainless Steel Dash Fasteners , Stainless Steel Bolts Etc., Of Required Size, On The Top Of The Floor Or The Side Of Waist Slab With Suitable Arrangement As Per Approval Of Engineer-In-Charge, ( For Payment Purpose Only Weight Of Stainless Steel Members Shall Be Considered Excluding Fixing Accessories Such As Nuts, Bolts, Fasteners Etc. ) . :- Grade 304 35 Steel Work In Built Up Tubular Trusses Including Cutting, Hoisting ( Height Upto 10 M ) Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Welded And Bolted Including Special Shaped Washers Etc. Complete. Hot Finished Welded Type Tubes. 36 Providing And Fixing T-Iron Frames For Doors, Windows Andventilators Of Mild Steel Tee-Sections, Joints Mitred And Welded With 15X3 Mm Lugs 10Cm Long Embedded In Cement Concrete Blocks 15X10x10 Cm Of 1:3:6 ( 1 Cement : 3 Coarse Sand : 6 Graded Stone Aggregate 20 Mm Nominal Size ) Or With Wooden Plugs And Screws Or Rawl Plugs And Screws Or With Fixing Clips Or With Bolts And Nuts As Require Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer. 37 Providing And Fixing To Existing Door Frames 30Mm Thick Factory Made Polyvinyl Chloride ( Pvc ) Door Shutter Made Of Stiles And Rails Of A Upvc Hollow Section Of Size 60X30 Mmand Wall Thickness 2Mm + / - 0.2Mm With Inbuilt Decorativemoulding Edging On One Side. The Stiles And Rails Mitred Andjoined And The Corners By Means Of M.S.Galvanized / Plastic Brackets Of Size 75X220 Mm Having Wall Thickness 1.0Mmand Stainless Steel Screws. The Stiles Of The Shutter Reinforced Byinserting Galvanized M.S.Tube Of Size 25X20 Mm And 1Mm + / - 0.1Mm Wall Thickness. The Lock Rail Made Up Of „H? Section, A Upvc Hollow Section Of Size 100X30 Mm And 2Mm + / - 0.2Mmwall Thickness Fixed To The Shutter Stiles By Means Of Plastic / Galvanized M.S.Tube „U? Cleats. The Shutter Frame Filled With A Upvc Multi-Chambered Single Panel Of Size Not Less Than 610Mm, Having Overall Thickness Of 20Mm And 1Mm+ / - 0.1Mm Wall Thickness. The Panels Filled Vertically And Tie Bar At Two Places Byinserting Horizontally 6Mm Galvanized M.S.Rod And Fastened With Nuts And Washers.Complete As Per Manufacturer?S Specification And Direction Of Engineer-In-Charge. ( Forw.C.And Bathroom Door Shutter ) 38 Providing And Fixing External Grade Board Solid Core Single Leaf Flush Door Shutters Isi 2202-67 Marked Using Phenol Formal Dehyderesin In Glue Both Sides With Approved Steel Fittings Complete As Per Annexure A : 35 Mm Thickcommercial Veneer Both Side 39 Extra For Providing Other Type Of Fittings As Mention In Annexure A ( As Approved By Ei ) : Stainless Steel Fittings 40 Providing And Fixing Square Bars Or Other Flat Welded To Window, Ventilatiors Etc. 41 Supplying And Fixing Fixed Wire Gauge Of 14 Mesh X 24 Gauge To The Metal Frame Of Rolled Section By Metal Beading 20X3mm With Suitable Screw At Not Exceeding 150Mm Distance. 42 Renewing Glass Panes, With Putty And Nails Wherever Necessary :- Float Glass Panes Of Thickness 5 Mm 43 M-40, 80Mm Thick To Be Used In Medium- Traffic ( Medium Traffic Is Defined As A Daily Traffic Of 150-450 Commercial Vehicles Exceeding 30 Kn Laden Weight, Or An Equivalent Of 0.5 To 2.0 Msa For A Design Life Of 20 Years. ) Like City Streets, Small And Medium Market Roads, Low Volume Roads, Utility Cuts On Arterial Roads, Etccategory „C?Not Denated On Any It?S Faces Like Hexagon, Rectangular, Square Shape As Per Irc Sp 63:2004 44 Providing And Laying At Or Near Ground Level Factory Made Kerb Stone Of M-25 Grade Cement In Position To The Required Line, Level And Curvature Jointed With Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) Including Making Joints With Without Grooves ( Thickness Of Joints Except At Sharp Curve Shall Not To More Than 5Mm ) Including Making Drainage Opening Wherever Required Complete Including Painting Etc. As Per Direction Of Engineer-In-Charge ( Length Of Finished Kerb Edging Shall Be Measured For Payment ) . ( Precast C.C. Kerb Stone Shall Be Approved By Engineerin- Charge ) . 45 Stone Work ( Machine Cut Edges ) For Wall Cladding / Veneering Work Up To 10M Height With 20 To 30 Mm Thick Red Sand Stone ( Karauli ) And Backing Filled With A Grout Of 12Mm Thick Cement Mortar 1:3 ( 1 Cement : 3 Coarse Sand ) Including Pointing In White Cement Mortar 1:2 ( 1 White Cement : 2 Stone Dust ) With An Admixture Of Pigment Matching The Stone Shade : ( To Be Secured To The Backing By Means Of Cramps Which Shall Be Paid Separately ) Exposed Face Machine Cut 46 Providing And Fixing Stainless Steel Cramps Of Required Size And Shape For Anchoring Stone Wall Lining To The Backing Or Securing Adjacent Stones In Stone Wall Lining In Cement Mortar 1:2 ( 1 Cement : 2 Coarse Sand ) Including Making The Necessary Chases In Stone And Holes In Walls Wherever Required 47 Supplying And Fixing Machine Cut Fine Dressed Red / Pink Sand Stone Dasa Or Coping, With Full Moulding If Required Laid On Cement Mortar 1:4 Including Pointing With Admixture Of Pigment Matching With The Stone Shade. 75Mm Thick 48 Fine Dressed & Machine Cut Edges 30-35 Mm Thicksand Stone Flooring Over 20 Mm ( Average ) Thick Base Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Jointed Grey Cement Slurry Mixed With Pigment To Match The Shade Of Stone Complete As Per Design Drawing And Instruction Of Ei. :- Red Sand Stone ( Karauli Stone ) 49 Structural Steel Work Riveted, Bolted Or Welded In Built Up Sections, Trusses And Framed Work, Including Cutting, Hoisting ( Height Upto 10 M ) , Fixing In Position And Applying A Priming Coat Of Approved Steel Primer All Complete:
