Tender For Repair Of Roof Sheet, Ceiling, Wall Paneling And Connected Items Under Aor Of Age B / R Dett A Under Ge 862 Ews - Demolition Of Cement Concrete ( Unreinforced ) In Ground Floor And Paving N Exc 15 Cm Thickness Below Or Above The Ground Level Complete All As Specified And Directed. 2 M&L For 50Mm Thick Plain Cement Concrete, Type C-1, 1:3:6 ( Using 20Mm Graded Crushed Stone Aggregate ) As In Plinth Protection, Laid In Slope 1:12 From Outer Edge Of The Wall, Finished Even And Fair, Laid In Alternate Bays Including Providing 6Mm Wide Joints Throughtout Thickness Of Plinth Protection In Concrete Bays And In Between Walling And Plinth Protection, Joints Filled Mastic Filling Comprising Of One Part Of Heated Bituminous 85 / 25 And 3 Parts Of Sand ( All By Weight ) Complete After Demolation Of Old Cement Concrete All As Specified And Directed. 3 Taking Down Cement Plaster, Any Description On Brick Or Stone Or Cement Concrete Walls Including Raking Out Joints, Hacking For Key, Scrubbing Down With Water Etc Complete All As Specified And Directed. 4 Demolition Of Brickwork Or Stone / Boulder Masonry, Built In Cement Mortar Including All Quoins, Arches, Pillars, Etc, But Excluding Ashlar Facings, Dressed Stone-Work And Precast Concrete Articlescomplete All As Specified And Directed. 5 M&L For Brick Work With Sub Class B Bricks, Old Size, Straight Or Curved On Plan Exc 6 M Mean Radius, Built In Cement Mortar 1:4 Complete All As Specified And Directed. 6 Description All As Per Item No. 05 Above But Except Bricksnote: Old Brick Retrieved From Demolition Shall Be Used. 7 M&L For Stone Walling Of Random Rubble Masonry, Uncoursed, Well Bonded, Bedded And Soilidly Hearted, Built In Cement Mortar 1:6, Complete All As Specified And Directed. 8 Description All As Per Srl Item No. 07 Above But Except Stone.Note: Old Stone Retrieved From Demolition Shall Be Used. 9 M&L For Extra Over Stone Walling For Hammer Dressing To Face Stones And Dressing Of Face Beds With Maximum Depression On Facefrom Straight Edge Held Against The Dressed Surface N Exc 20 Mm For Lime Or Sand Stone And Joints, As Specified, Of Random Rubble Walling, Uncoursed Or Brought Upto Courses Complete All As Specified And Directed. 10 M&L For Rendering 20Mm Thick In Cement Mortar 1:6 On Stone Masonry Surface, Other Than Fair Faces Of Surface, Finished Even And Smooth Without Using Extra Cement Complete All As Specifed And Directed. 11 M&L For Rendering 15Mm Thick In Cement Mortar 1:6 On Brick Wall Surface, , Other Than Fair Faces Of Surface, Finished Even And Smooth Without Using Extra Cement Complete All As Specifed And Directed. 12 M&L For Rendering 20 Mm Thickon Stone Masonry Surface On Wall , In Cement Mortar 1:4Finished Even And Smooth Without Using Extra Cementcomplete All As Specified And Directed. 13 M&L For Rendering 15 Mm Thickon Concrete / Brick Surface On Wallin Cement Mortar 1:4Finished Even And Smooth Without Using Extra Cementcomplete All As Specified And Directed. 14 M&L For Preparation Of New Plastered Surfaces Of Walls And Applying Two Coats Of Cement Base Paint Over A Coat Of White Wash Complete All As Specified And Directed. 15 M&L For Preparation Of New Plastered Surfaces Of Walls And Applying Two Coats Of Oil Bound Distemperover A Coat Of 1.50Mm Thick Wall Care Putty Complete All As Specified And Directed. 16 M&L For 25Mm Thick Plain Cement Concrete Type B-0 1:2:4 ( Using 12.5 Graded Crushed Stone Aggregate ) As In Sub Base, Complete All As Specified And Directed. 17 Dismantling Of Asbestos Cement ( Corrugated, Semi Corrugated Etc ) Sheeting In Roof Covering, Complete All As Specified And Directed. 18 Dismantling Of Plain Or Corrugated Steel Sheeting, Any Gauge, Thickness Including Nanital Or Similar Pattern Roof Covering, Complete All As Specified And Directed. 19 S&F For Pre-Painted Galvalume Aluminium Zinc Coated Gi Based Corrugated Steel Sheet 0.50Mmthick Of Approved Colour Having Tensile Strength 550 Mpa As In Roof Covering / Cladding To Wall Fixed With Self Tapping Screws Including Side And End Lap As Per Manufacturer’S Instructions, Complete All As Specified And Directed. 20 S&F For Pre-Painted Galvalume Aluminium Zinc Coated Gi Based Plain Steel Sheet 0.50Mmthick Of Approved Colour Having Tensile Strength 550 Mpa As In Ridges, Hips, Valley Gutters Fixed With Self Tapping Screws Including Side And End Lap As Per Manufacturer’S Instructions, Complete All As Specified And Directed. 21 S&F For 0.63 Mm Galvanised, Corrugated Mild Steel Sheeting With Two Corrugation Side Lap, Fixed With L Or J Type Hooks Or Cranked Hook Bolts And Washers In Roofs, Walls Etc With Grade Of Zinc Coating 275 Gm / Sqm, Complete All As Specified And Directed. 22 S&F For 0.63 Mm Thick Plain, Galvanised, Mild Steel Sheeting, In Ridges, Hips, Valley Gutters, Drip And Straight Flashings ( Length And Girth As Fixed ) With Grade Of Zinc Coating 275 Gm / Sqm, Complete All As Specified And Directed. 23 Dismantling Floor, Hearth Or Wall Tiling Including Cement Mortar Bedding ( But Not Backing ) Removing Rubbish Off The Premises Complete All As Specified And Directed. 24 M&L For Non Skid Ceramic Coloured Tiles 7 To 8 Mm Thick ( Premium Quality ) Square / Rectangular, Area Of Each Tile Exceeding 0.11 Sqm But N.Exc 0.18 Sqm In Floors Etc, Set And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Colour Of Tiles, Laid Over And Including 15Mm Thick Screed Bed In Cement Mortar 1:4, Complete All As Specified And As Directed. 25 M&L For Vitrified Colouredtiles Light Shade 600X600x10 Mm Thick As In Floorsset And Jointed In Neat Cement Slurry And Pointed In White Or Coloured Cement To Match The Colour Tiles Over And Including 15 Mm Thick Screed Bed In Cement Mortar 1:4, Complete All As Specified And Directed. 26 S&F For 4Mm Thick Designer Ceiling Boardin Ceiling Fixed With Screw As Per Manufacturers Instructions, Laid Over And Including Hot Dipped Galvanised Iron In Post Grid With 24Mm Wide T Section Exposed Flanges Which Shall Be Powder Coated White.The Frame Work Shall Comprise Of Main Runner Made From 0.33 Mm Thick Galvanised Steel Sheetof Size 24 X 32 X 300 Mm Spaced At 1200 Mm Centres Securely Fixed To The Structural Soffits By Approved Hangers At 1200Mm Maximum Centres.Hangers Of Gi Wire 4 Mm Dia To Be Fixed By Approved Rawl Plug Or Hanged With Existing Truss Members. The Last Hanger At The End Of Each Main Runner Shall Not Be Greater Than 450 Mm From Adjacent Wall Flush Fittings Of 1200 Mm Long Screws Tee With ( Double Stiching ) To Interlocked Between Main Runners At 600 Mm Centre To Centre From 1200 X 600 Mm Modulescross Tee Longer Than 600 Mm Modules To Be Formed By Fittings 600 Mm Long Cross Tee, Tee Perimeter Wall Angle Shall Be Of 0.45 Mm Thick Galvanised Steel Of Size 19 X 19 Mm And 300 Mm Long Of White Colour All As Per Insturctions Including Dismantling Of Existing Board Etc, Complete All As Specified And Directed. 27 S&F For Roof Trusses ( Framed ) , Trussed, Purlins, Crane Gantries, Rails And Fastening And Heavy Brackets Framing ( Beam, Tee, Angle, Channel Or Flat Sections ) Including Distance Pieces, Cleats, Etc. Conforming To Fe-290-W ( Gde - E-165 ) Quality A Complete All As Specified And Directed. 28 Dismantling Of Timber Scantling 40 Sqcm And Over In Section, In Any Position As In Unframed Or Framed Work Complete All As Specified And Directed. 29 M&L For Preparation Of New Or Previously Untreated Steel Or Iron Surfaces Of Any Description, Over 10Cm In Width Or Girth Andapplying Two Coats Of Synthetic Enamel Paint Over A Coat Of Red Oxide Primer Complete All As Specified And Directed. 30 M&L For Preparation Of Old Decorated Surface Of Brick / Concrete Plastered / Un-Plastered Surfaces Of Walls, Pillars, Cornices Etc By Brooming Down With Steel Wire Brushing, Scrapping Down Smoke Soot, Moulds, Moss And Efflorescent Salts And Treating Oil And Greasy Spots And Applying One Coat Of Cement Base Paint On Walls, Pillars, Cornices Etc Complete All As Specified And Directed. 31 M&L For Preparation Of Old Decorated Surface Of Brick / Concrete Plastered / Un-Plastered Surfaces Of Walls, Pillars, Cornices Etc By Brooming Down With Steel Wire Brushing, Scrapping Down Smoke Soot, Moulds, Moss And Efflorescent Salts And Treating Oil And Greasy Spots And Applying Two Coats Of Oil Emulsion Distemper Including One Coat Of Wall Care Putty 1.5Mm Thick, Complete All As Specified And Directed. 32 S&F For Pvc Paneling As In Walls Consisting Of 5Mm Thick Wood Grain Printed Pvc Sheet Fixed In Site On Pvc Frame Work, Complete All As Specified And Directed By Engr-In-Charge, Including Dismantling Existing Wall Paneling. 33 Taking Down Aluminium Door / Window, Partition Of Any Description Including All Fitting And Fixtures, Complete All As Specified And Directed By Engr-In-Charge. 34 S&F For Anodised Aluminium, Power Coated ( Minimum Thickness Of Power Coating 50 Micron ) Frame For Doors, Windows, Ventilators With One Or More Rebates Including Joining Cleat For Fixing Etc, Complete All As Specified And Directed. 35 S&F For Anodised Aluminium ( Minimum Thickness Of Power Coating 50 Micron ) Door Shutters, Aluminium Section Weighing 0.55Kg / M Including Necessary Joining Cleats, Glazing Clips, Rubber Neoprene Packing, Handles 2 Nos In Each Door, Hinges, Mortice Lock, 1 Nos Floor Door Stopper, Anodised Aluminium Snap Beading, Screws Etc. Complete All As Specified And Directed. 36 S&F For Sheet Glass 5.5 Mm Thick, Ordinary Quality And Fixed With Aluminum & Rubber Beading In Square Exc 0.5 Sqm In Each Pane Complete All As Specified And Directed. 37 M&L For 12Mm Thick Prelaminated Particle Board, Interior Grade, Prelaminated One Side With Decorative Choice Lamination & Otherside Balancing White Lamination, Fixed With Screws To Aluminium Framework ( Fittings And Fixtures Are Included In Shutter Item ) , Complete All As Specified And Directed. 38 S&F For Door Closer Hydraulically Regulated, Aluminium ( Extruded Section Body ) Designation No 3, Universal Type, Suitable For Door Shutters Of 851 To 1000Mm In Width And Of Weight Between 61 To 80 Kg. Complete All As Specified And Directed. 39 S&F For 100 Mm Size Mortice Lock Of Brass, Vertical Type, 4 Levers, Complete All As Specified And Directed. 40 Taking Down Chowkhats Or Frames N. Exc 1.5 Sqm Each ( Without Taking Off Shutters From The Frames ) And Removing To Store Complete All As Specified And Directed. 41 S&F For Factory Made Ms Tubular Box Type Window ( Double Rebate And Double Shutter ) Of Ms Rolled Steelsection Conforming To Is-1038 And Shall Be Isi Marked Manufactured By Isi Approved Manufacturer, Openable Frames Shall Be Fabricated Of Sections As Approved By Engr-In-Charge, Corner Welded To Form A Solid Fused Welded Joint, Handles Shall Be Of Z Section Welded With Openable Frame Box Steel Section Used In Outer Frame, Shutter Frame And Central Frame Shall Be Erw Secton Of 16 Gauge With Fixing Lugs To Be Fixed As Per Provision Of Is-1038Except That Top Lugs Shall Not Be Provided , All Shutters Of Windows Shall Be Provided With 4 Nosfriction Free Hinges, 2 Nos 75 Mm Tower Bolts To Each Leaf Of Window One At Top And One At Bottom Welded On 3 Mm Thick Steel Sheet Piece Of Suitable Size Which Shall Be In Turn Welded To Z Section Of Steel Window To Provide Suitable Arrangement Of Using Tower Bolt. Glazed, Gauzedwindow , Mild Steel Casement Stays 300 Mm With Hinged Joint And Two Plates With Studs Complete All As Specifiedwith All Fittings And Fixtures Without Glazing Bars Including 3Mm Thick Sheet Glass Ordinary Quality And Stainless Steel Wire Mesh Of 0.56Mm Nominal Dia And Average Width Of Aperture 1.18 Mm Etc Complete All As Specified And Directed. 42 M&L Forframed Work Such As Grills, Gratings, Etc., With Ends Of Bars Shouldered And / Or Riveted, Or Forged Into Spikes; Framed Guard Bars; Barred Iron Doors; Ladders; Framed Balusters; Walk Ways; Railings; Framework Of Water Tanksand Similar Work Conforming To Fe 290, Gde E-165 Complete All As Specified And Directed. 43 Taking Down Chowkhats Or Framesexc 1.5 Sqmand N.Exc 4 Sqm Each ( Without Taking Off Shutters From The Frames ) And Removing To Store Complete All As Specified And Directed. 44 S&F For Pressed Steel Door Frame Of Size 125X60 Mm With One Or More Rebates Incl Necessary Fixing Lugs, Hinges, Lock And Strike Plate Etc Including Back Filling To Chowkhats In Pcc 1:3:6 Type C-0 Using 12.5Mm Graded Crushed Stone Agregate Complete All As Specified And Directed. 45 S&F For Pressed Steel Frame For Doors With One Or Morerebates Of Size 105X60mm Including Necessary Fixing Lugs, Hinges, Lock And Strike Plate Etc Including Back Filling Of Chowkhats With Pcc 1:3:6 Type C-0 Using 12.5Mm Gradedcrushed Stone Agregate Complete All As Specified And Directed. 46 S&F For Factory Made 2Nd Class Hard Wood 35 Mm Thick Plain Framed Panelled Shutters ( Two Panel ) With Lock Rail And Panel Of 9Mm Bwp Commercial Ply Or 12Mm Veneered Particle Board With Commercial Veneering On Both Faces. The Size Of Rail And Stile As Per Is : 1003 ( Part-I ) , Kiln Seasoned And Chemically Pressure Treated Complete All As Specified And Directed. 47 S&F For Factory Made 35 Mm Thick 2Nd Class Hard Wood Glazed And Skelton Shutters Open Rebated And Prepared To Receive Glass, Gauze Etc ( Without Sash Bars ) Edges Of Framing Plain, Chamfered Or Rounded Fitted With Cut And Mitred Beads For Securing Glass, Etc Sizes Of Members Of Shutters As Specifiedin Ssr Part I, Section 8, Clause 8.24 ( A ) ; Supplied And Fitted To Chowkhats Complete All As Specified And Directed. 48 M&L For300mm Ms Ordinary Rat Tail Rod Pattern Door Springs ( Isi Marked ) Of Approved Make Including Roller And Roller Plate, Complete All As Specified And Directed. 49 M&L Foraluminium Anodized Barrel Tower Bolts 150 Mm Long ( Isi Marked ) Of Extruded Section All As Specified And Directed. 50 M&L Forextruded Aluminium Alloy Handles Size 150 Mm Fabricated Type Anodised ( Isi Marked ) Complete All As Specified And Directed. 51 S&F For 100Mm Long Stainless Steel Butt Hinges Medium Weight Cold Rolled, Fixed To Pvc Doors Complete All As Specified And Directed. 52 M&L For 250Mm Long Mild Steelsliding Door Bolt, Plate Type, Stove Enamelled Black, With Bright Bolt Not Less Than 12Mm Dia With And Including A Minimum Of 6 Bolts And Nuts, Four On Bolt Plate And Two On Staple Plate ( Isi Marked ) Complete All As Specified And Directed. 53 S& F For Stainless Steel Wire Cloth, 0.36Mm Nominal Dia Of Wire And Average Width Of Aperature 1.40Mm And Fixed With Stainless Steel Wire Staples Complete As In Repair All As Specified And Directed. 54 M&L Forpreparation Of Newwooden Surfaces Of Any Description Exc 10 Cm In Width Or Girth And Applying Two Coats Of Synthetic Enamel Paint Over A Coat Of Pink Primer Complete All As Specified And Directed.
