Bids Are Invited For Proposed Furniture Estimate For The Construction Of Ware House For 2500 & 5000 Evms Godown In Total Quantity : 148, Bhopal-Madhya Pradesh

Bids Are Invited For 1 Providing And Placing of Executive Mid back Chair : The chair seat shall be made up of 1.2 +/- 0 .1 cm. thick hot pressed plywood measured as per QA method described in OCP- QLTA-PL14-18. The back assembly shall be made up of powder coated (DFT 40-60 microns) tubular frame of ida 2.54 +/- 0.03 cm. X 0.2 +/- 0.016 cm thick. MS ERW tube designed with contoured lumbar support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn. Seat size: 47.0 cm(W) X 48.0 cm(D). BACK SIZE: 46.5 cm(W) X 60.5 cm(H). HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR Polyurethane foam is moulded with 45 +/- 2 kg/m^3 and Hardness 16 +/- 2 kgf as per IS: 7888 for 25% compression. ARMRESTS: The armrests shall be one- piece armrests are injection moulded form black Co- Polymer Polypropylene.CENTRE TILT SYNCRO MECHANISM: The mechanism shall be designed with the following features: 360° revolving type, Upright position locking , Seat/back tilting ratio of 1:3 & Tilt tension adjustment (6 DEG SEAT TILT/18 DEG BACK TILT). PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment shall have an adjustment stroke of 11.0 +/- 0.3 cm. TELESCOPIC BELLOW ASSEMBLY: The bellow shall be 3-piece telescopic type and it is injection moulded in black Polypropylene. PEDESTAL ASSEMBLY: The pedestal is injected moulded in black 33% glass filled Nylon -66 and fitted with 5 twin wheel castors. The pedestal shall be 66.3cm. pitch-centre dia. (76.3 cm with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon.Seat Size: 47.0 cm(W) x 48.0 cm(D) Back size 46.5 cm(W) x 60.5cm(H). Approved Furniture Make - Godrej (CII GREEN PRO/SCS INDOOR ADVANTAGE GOLD/GRIHA Certified product) Design as approved by Engineer-In-charge. 4 2 Providing And Placing of Executive Visitor Chair : The chair seat shall be made up of 1.2 +/- 0 .1 cm. thick hot pressed plywood measured as per QA method described in OCP- QLTA-PL14-18. The back assembly shall be made up of powder coated (DFT 40-60 microns) tubular frame of ida 2.54 +/- 0.03 cm. X 0.2 +/- 0.016 cm thick. MS ERW tube designed with contoured lumbar support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn. Seat size: 47.0 cm(W) X 48.0 cm(D). BACK SIZE: 46.5 cm(W) X 60.5 cm(H). HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR Polyurethane foam is moulded with 45 +/- 2 kg/m^3 and Hardness 16 +/- 2 kgf as per IS: 7888 for 25% compression. ARMRESTS: The armrests shall be one- piece armrests are injection moulded form black Co- Polymer Polypropylene. TUBULAR FRAME: The powder coated(DFT 40-60 microns) tubular frame is cantilever type & made of dia 2.54 +/- 0.03 X 0.2 +/- 0.016 cm thick M.S. E.R.W. tube. Approved Furniture Make - Godrej (CII GREEN PRO/SCS INDOOR ADVANTAGE GOLD/GRIHA Certified product) Design as approved by Engineer-In-charge. 4 3 Providing And Placing of MAIN TABLE WITH PEDESTAL : The Main Table should be of Size - 1350 x 600 x 750 should be made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security. Approved Furniture Make - Godrej(CII GREENPRO/UL GREENGUARD/ GRIHA/ SCS INDOOR ADVANTAGE GOLD/ Greenguard Certified Product) Design as approved 4 4 Providing And Placing OF STORAGE UNIT : It should have multi bend construction with interlocking design and full length over lapping doors and sides. It should have three way bolting mechanism. All steel components should undergo eight tank anti rust treatment and oven baked epoxy polyester powder coated with 50-60 dry film thickness. The CRCA steel sheet used for the body is of 20 SWG / guage, as per IS-513 1994. It has 5 shelves made of 22 SWG / guage CRCA steel sheet. It has six lever Mazak Zinc Plated Godrej Lock. It has scratch hardness of 3 Kgs as BS-3900 part E2 1970, IS-101. It sustains salt spray test of 1000 hrs. as per IS 101. It should have 4 shelves made of 0.8 mm thick CRCA steel sheet. It should have six lever Mazak Zinc Plated Godrej Lock. It should sustain salt spray test of 1000 hrs. as per IS 101. Overall size: 198.0 cm (H) x 91.5 cm (W) x 48.5S cm (D). Approved Furniture Make - Godrej (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. 3 5 Providing And Placing including transportation and maintenance charges during performaance period of MULTIPURPOSE CHAIR PLASTIC SHELL with four leg frame : 1. SHELL : The single piece seat back shell is made up of injection moulded high impact strength glass filled polypropylene polymer compound. UNDERSTRUCTURE should be powdercoated (DFT 50±10 microns) welded tubular frame is made from 0 2.22 ± 0.03 cm x 0.16 ± 0.0128 cm M.S. E.R.W tube. The 0.16 ± 0.008 cm thk CRCA sheet is welded to tubes for fixing shell to the frame. The shoe is made of high impact strength polypropylene polymer compound and are fitted at the end of the tubular frame. Overall Size - WIDTH (W) : 51.5CM, DEPTH (D) : 52.5 CM,HEIGHT (H) : 81.8 CM. Approved Furniture Make - Godrej (Greenguard/BIFMA Certified Co.) Design as approved by Engineer-In-charge. 120 6 Providing And Placing of Executive Mid back Chair : The chair seat shall be made up of 1.2 +/- 0 .1 cm. thick hot pressed plywood measured as per QA method described in OCP- QLTA-PL14-18. The back assembly shall be made up of powder coated (DFT 40-60 microns) tubular frame of ida 2.54 +/- 0.03 cm. X 0.2 +/- 0.016 cm thick. MS ERW tube designed with contoured lumbar support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn. Seat size: 47.0 cm(W) X 48.0 cm(D). BACK SIZE: 46.5 cm(W) X 60.5 cm(H). HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR Polyurethane foam is moulded with 45 +/- 2 kg/m^3 and Hardness 16 +/- 2 kgf as per IS: 7888 for 25% compression. ARMRESTS: The armrests shall be one- piece armrests are injection moulded form black Co- Polymer Polypropylene.CENTRE TILT SYNCRO MECHANISM: The mechanism shall be designed with the following features: 360° revolving type, Upright position locking , Seat/back tilting ratio of 1:3 & Tilt tension adjustment (6 DEG SEAT TILT/18 DEG BACK TILT). PNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment shall have an adjustment stroke of 11.0 +/- 0.3 cm. TELESCOPIC BELLOW ASSEMBLY: The bellow shall be 3-piece telescopic type and it is injection moulded in black Polypropylene. PEDESTAL ASSEMBLY: The pedestal is injected moulded in black 33% glass filled Nylon -66 and fitted with 5 twin wheel castors. The pedestal shall be 66.3cm. pitch-centre dia. (76.3 cm with castors). TWIN WHEEL CASTORS: The twin wheel castors are injection moulded in Black Nylon.Seat Size: 47.0 cm(W) x 48.0 cm(D) Back size 46.5 cm(W) x 60.5cm(H). Approved Furniture Make - Godrej (CII GREEN PRO/SCS INDOOR ADVANTAGE GOLD/GRIHA Certified product) Design as approved by Engineer-In-charge. 4 7 Providing And Placing of MAIN TABLE WITH PEDESTAL : The Main Table should be of Size - 1350 x 600 x 750 should be made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security. Approved Furniture Make - Godrej(CII GREENPRO/UL GREENGUARD/ GRIHA/ SCS INDOOR ADVANTAGE GOLD/ Greenguard Certified Product) Design as approved 4 8 Providing And Placing of Executive Visitor Chair : The chair seat shall be made up of 1.2 +/- 0 .1 cm. thick hot pressed plywood measured as per QA method described in OCP- QLTA-PL14-18. The back assembly shall be made up of powder coated (DFT 40-60 microns) tubular frame of ida 2.54 +/- 0.03 cm. X 0.2 +/- 0.016 cm thick. MS ERW tube designed with contoured lumbar support for extra comfort. The back shall be upholstered using Net fabric with high tenacity yarn. Seat size: 47.0 cm(W) X 48.0 cm(D). BACK SIZE: 46.5 cm(W) X 60.5 cm(H). HIGH RESILIENCE (HR) POLYURETHANE FOAM : The HR Polyurethane foam is moulded with 45 +/- 2 kg/m^3 and Hardness 16 +/- 2 kgf as per IS: 7888 for 25% compression. ARMRESTS: The armrests shall be one- piece armrests are injection moulded form black Co- Polymer Polypropylene. TUBULAR FRAME: The powder coated(DFT 40-60 microns) tubular frame is cantilever type & made of dia 2.54 +/- 0.03 X 0.2 +/- 0.016 cm thick M.S. E.R.W. tube. Approved Furniture Make - Godrej (CII GREEN PRO/SCS INDOOR ADVANTAGE GOLD/GRIHA Certified product) Design as approved by Engineer-In-charge. 4 9 Providing And Placing of MAIN TABLE WITH PEDESTAL : The Main Table should be of Size - 1350 x 600 x 750 should be made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Pedstal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestal is provided with lock for security. Approved Furniture Make - Godrej(CII GREENPRO/UL GREENGUARD/ GRIHA/ SCS INDOOR ADVANTAGE GOLD/ Greenguard Certified Product) Design as approved Total Quantity : 148

Refer document

INR 20000.0 /-

Refer document