Military Engineer Services-MES has published Tender For Repair To Compound Wall Fencing Barbed Wire Concertina Coil Gates Grill Stone Masonry Block Masonry Rcc Retaining Wall Dwarf Wall Etc And Allied Works Age B R Iii At Dssc Wellington. Submission Date for this Tender is 14-01-2023. Masonary Work Tenders in wellington Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 26-Dec-2022 | REVISED BOQ 8291 | BOQ | 07-01-2023 |
| 2 | 07-Jan-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-01-2023 |
| Sl. No. | Item Description |
| 1 | Demolition of brick work or stone / boulder masonry,built in cement mortar, including all quoins, arches, pillars etc but excluding ashlar facing, dressed stone work and precast concrete articles etc complete, all as specified. |
| 2 | Demolition of un-reinforced Concrete of any description and in any position not otherwise specifically provided complete all as specified and directed. |
| 3 | Demolition of reinforced cement Concrete of any description and in any position not otherwise specifically provided for such as RCC post, manholes, landings etc ( reinforcement cut as required to facilitate demolition)complete all as specified |
| 4 | Excavation in trenches, n.exc 1.5m wide and n.exc 1.5m in depth for foundation, or for man holes etc., n.exc 10 sqm on plan and n.exc 1.5m in depth and getting out in hard/ dense soil complete all as specified and directed. |
| 5 | M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete all as specified and as directed. |
| 6 | M&L Precast cement concretetype C1 1:3:6 (Using 20 mm gradedaggregate) block masonrywith solidblocks, exc. 10 cm in width and setting in mortar 1:6 complete all as specified and directed. |
| 7 | Taking down cement plasteron brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc. |
| 8 | M&L for rendering 15 mm thick on stone masonry surfaces/block wall other than fair faces of brick work in cement mortar 1:4 finished fair and even. |
| 9 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc.complete all as specified and directed. |
| 10 | M&L for GraniteTile 10 mm thick machine cut, in skirting/dado laid over cement screedand jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing, includingrendering as backing coat 10 mm thickin CM 1 :3complete all as specified and as directed. |
| 11 | M&L for Granitestone slab in flooring of approved colour 16-18 mm thick machine cut, leather finished, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, laid over and including 20mm thick screed bed in CM (1 :4) complete all as specified and directed by Engr-in-Charge. |
| 12 | Dismantlingwrought iron mild steel work of any description not otherwise provided for such as fencing posts, gates, grills etc complete all as specified and directed. |
| 13 | S&Ffor mild steel angle iron post and struts in fencing including cutting tops to shape as directed , drilling holes, notching for wire etc, flet iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting etc and similar work conforming to Fe-290 Gde E- 165 complete all as specified |
| 14 | All as per item No.13 above but except material |
| 15 | Dismantling of barbed wire and neatly coiled on rough drums complete all as specified and directed. |
| 16 | Excavating in post holes (or similar holes) each n exc 0.5cu. m,getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm,all as specified and directed |
| 17 | M&L Cement concrete in foundations, filling and mass concrete Type C2 1:3:6(40 mm graded) all as specified and directed |
| 18 | Dismantling , steel barbed wire any type complete all as specified |
| 19 | Refixing ofGalvanised 2 strand, steel barbed wire 2.24 mm dia, barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as specified and directed (each line wire to be measured)all as specified and directed |
| 20 | S & F Galvanised 2 strand, steel barbed wire 2.24 mm dia, barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as specified and directed (each line wire to be measured)all as specified and directed |
| 21 | Dismantling chain link fencing, wire mesh, any type complete all as specified |
| 22 | Supply only Chain link MS galvanised fencing, any size or type complete all as specified |
| 23 | Fixing only old / new chain link fencing including line wire mesh,size and type to any type of standard rails straining bolts etc including provision binding wire complete all as specified |
| 24 | Dismantling and refixing of GI concertina coil fencing 450mm dia with 8 to 10 RM PWR coil having minimum 25 Nos of clips each round and weight upto 15.5 Kg per coil approx, when unstreched to be provided on the top of compound wall including clips as per manufacturers instructions complete all as specified and directed. |
| 25 | M & L in repairs for GI concertina coil fencing 450mm dia with 8 to 10 RM PWR coil having minimum 25 Nos of clips each round and weight upto 15.5 Kg per coil approx, when unstreched to be provided on the top of compound wall including clips as per manufacturers instructions complete all as specified and directed. |
| 26 | S&F Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long with dia of neck 5 to 10 mm complete all as specified |
| 27 | S&F Mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips Fe-410-W (Gde.E-250) quality-A or Fe 290 (Gde - E-165) complete all as specified |
| 28 | All as per item No.25 above but except material all as specified and directed |
| 29 | M&L for one coat of aluminium painting (silver colour) onold Gates, mesh etc surfaces including preparation of surfaces10 cm width or girth all as specified and as directed by Engr-in-Charge. |
| 30 | M&L forPreparation ofnew/previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer all as specified and directed |
| 31 | M & L for preparation of old painted surfaces of steel surfaces of any description not other wise described over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed Engr-in-Charge. |
| 32 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 all as specified and directed |
| 33 | M&L walling of random rubble uncoursed well bonded bedded and solidly hearted built in cm 1:6 and pointed the dressed surface with same mortar as the work process all as specified and directed |
| 34 | All as per item No.31 above but except stone. |
| 35 | Racking out joints and any type of pointing to random rubble polygonal rubble uncoursed stonework in old retaining wallin CM 1:4 etc. Complete all as specified and as directed. |
| 36 | Extra over stone walling for Granite or Trap stone for Hammer dressing to faces stones and dressing of face of beds and joints as specified of random rubble walling un coursed or brought up to course with maximum depression on face straight edge held against the dressing surface not exec 40mm all as specified and directed |
| 37 | M&L Raised pointing in cement mortar 1:4 to random or polygonal rubble, uncoursed or brought upto courses including raking out joints to the joints to existing or new surfaces complete all as specified and as directed by Engr-in-Charge. |
| 38 | M&L for PCC (1:2:4) type B1 (using 20mm graded stone aggregate) as in coping, benching etc including necessary form work, weathering, slightly rounded or chamfered angles and throating all as specified and directed by Engr-in-Charge. |
| 39 | S&F for 110mm diaPVC (SWR) pipes single socketted, in any length with rubber ring joints, laid in trenches or in floors all as specified and directed |
| 40 | Removing of bushes, shurbs and vegetation from Block / stone masonry retaining wallsat any height upto 8.00m and making the surface clean by removing wasteand filling with CM 1:6 / PCC 1:2:4 and making good the surface all directed by Engineer- in- Charge. |
| 41 | M&L for preparing surfaces, plastered or unplastered old surfaces of walls and applying one coat of cement base paint any shade as approved all as directed and specified. |
| 42 | M&L Preparing new surfaces of walls and applying two coats of cement base paint over a coat of primer complete all as specified an directed. |
| 43 | M & L for one coat oil emulsion distemper over walls including preparation of old painted surfaces complete all as specified and directed. |
| 44 | M & L for two coats oil emulsion distemper over one coat of primer on plastered surfaces of walls including preparation of new surfaces complete all as specified and directed. |
| 45 | M & L for one coat Exterior weather coat over walls including preparation of old painted surfaces including preparation of surfaces complete all as specified and directed. |
| 46 | M & L for two coats exterior weather coat over one coat of primer on plastered surfaces of walls / RR Masonry / or any cement / concrete surfaces including preparation of new surfaces complete all as specified and directed. |
| 47 | M&L for 75 mm thick Cement concrete type C1, 1:3:6 (using 20 mm gradedaggregate) inplinth protection/hard standingfinish even and fair complete all as specified and directed. |
| 48 | S&F Factory made machine pressed Chequered cement concrete colour tiles30 cm X30 cm X22 mm thick, with grey cement andpigments, set, jointed and pointed in neat cement slurry in floors , over 20 mm thickscreed bed in CM 1 :4complete all as specified and as directed. |
| 49 | All as per item No. 46 above but on vertical surfaces as in skirting, dados and risers of steps over backing coat 15 mm thick 1:3 in CM complete all as specified and directed. |
| 50 | All as per item No. 46 above but bull nosed as in treads complete all as specified and directed. |
| 51 | M&L for RCCnominal mix 1:1 1/2:3 Type B2 Using 20 mm stone Aggregate all as specified and directed |
| 52 | M&L for TMT bars 10mm dia and over cut to length bent to shape required including cranking bending spirally for hopping for columns, hooking ends and binding with and including MS wire (annealed) not less than 0.90 mm dia confirming to TMT bars complete all as specified. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
