|
| 1 | Mechanical repair and allied works.(component-1) |
| 2 | Complete machining of Engine block; including fitting of crank-shaft to cylinder block, straightening of crank-shaft & finishing of crank-shaft, fitting of connecting rod bushes, setting of main & connecting rod bearings, cylinder head seat cutting, fitting of new valve guides, head seats, finishing & setting of inlet & exhaust valves. The job also includ leak testing of cylinder heads and allied works. |
| 3 | Repairs to Tail Piece by way of remetalling & finishing to required size and as per sample. |
| 4 | Finishing & turning of Bushes (back-wheel) to appropriate size and as per sample. |
| 5 | Finishing & turning of Front Wheel Bushes to appropriate size and as per sample. |
| 6 | Finishing & turning of Pinion Bushes to appropriate size and as per sample. |
| 7 | Finishing & turning of Housing bushes to appropriate size and as per sample. |
| 8 | Repairs to damaged rear axle by way of remetalling, welding and finishing to desired size. |
| 9 | Repairs to clutch unit by way of remetalling, welding and finishing of clutch link lever, driving pin, clutch slide bush etc . |
| 10 | Fabrication of driver’s seat & back Rest of required size & Thickness for Diesel Road Rollers to ensure ease of operation. |
| 11 | Drilling of 40 No. holes on circumference of driving ring as per sample. |
| 12 | Repairs to radiator assembly by way of cleaning, descaling, washing for detecting leakage. The job also includes testing of radiator at desired pressure. |
| 13 | Repairs to the radiator by way of replacement of damaged tubes, brazing at leakage spots. The job also includes testing of radiator at desired pressure. |
| 14 | Repairs to Self Starter 12 Volt by way of providing and fitment of following : (component-2) |
| 15 | Self Starter Bush Set. (Make: Lucast) |
| 16 | Carbon Brush Set ( 04 pcs) (Make: Lucast) |
| 17 | Carbon Brush Holder .(Make: Lucast) |
| 18 | Solenoid Switch 12 Volt (Make: Lucast) |
| 19 | Bender as per sample. (Make: Lucast) |
| 20 | Field Coil set (4 Pcs) (Make: Lucast) |
| 21 | Armature Assembly (Make: Lucast) |
| 22 | Brush Cup (Make: Lucast) |
| 23 | Self Housing (Make: Lucast) |
| 24 | Self Starter Shifter/Folk (Make: Lucast) |
| 25 | Repairs to Alternator Assembly (Make: Lucast) 12 Volt by way of providing and fitment of following (component-2) : |
| 26 | Rectifier Plate |
| 27 | Cut Out |
| 28 | Carbon Brush set ( 04 pcs) (Make: Lucast) |
| 29 | Carbon Brush Holder |
| 30 | Stator Assembly |
| 31 | Rotor Assembly |
| 32 | Bearing 6202 |
| 33 | Bearing 6203 |
| 34 | Bearing 6205 |
| 35 | Alternator Cup |
| 36 | Alternator Pulley as per sample |
| 37 | Alternator Holder set |
| 38 | Starting Switch with Key |
| 39 | Ampere Meter |
| 40 | Starting Switch Push Button Type |
| 41 | Repairs to Self Starter (12 Volt) and Alternator by way of Providing and Fitting of following: Tandem Vibratory Roller (TVR) & Soil Compactor (component-3) |
| 42 | Solenoid Switch 12 Volt (Make: Mico Bosch) |
| 43 | Self Bendex (Make: Mico Bosch) |
| 44 | Self Bush (Set of 04Pcs) |
| 45 | Carbon Brush Set ( 04 pcs) (Make: Mico Bosch) |
| 46 | Rocker(Make: Mico Bosch) |
| 47 | Armature(Make: Mico Bosch) |
| 48 | Coil (Make: Mico Bosch) |
| 49 | Cut Out(Make: Mico Bosch) |
| 50 | Rectifier Plate (Make: Mico Bosch) |
| 51 | Armature Stator (Make: Mico Bosch) |
| 52 | Armature Rotor (Make: Mico Bosch) |
| 53 | Alternator Complete assembly (Make: Mico Bosch) |
| 54 | Bearing No: 6203/ 6204 (Make: SKF or eqvt) |
| 55 | Providing and fitting of High Pressure Hydraulic hoses(OEM recommended make) |
| 56 | Providing and fitting of bearing no: 16028.(Make: SKF/ OEM recommended) |
| 57 | P4 Pump (component-4) |
| 58 | Complete overhauling of F.I. pump |
| 59 | Providing and fitting ofElement |
| 60 | Providing and fitting of Delivery valve |
| 61 | Providing and fitting of Camshaft 400 |
| 62 | Providing and fitting of Nozzle |
| 63 | Pump calibration |
| 64 | For s4 Engine (component-5) |
| 65 | Complete overhauling of F.I. pump (S4) |
| 66 | Providing and fitting ofElement |
| 67 | Providing and fitting ofDelivery valve |
| 68 | Providing and fitting of Nozzle |
| 69 | Providing and fitting ofDistance piece |
| 70 | Providing and fitting ofPump service kit |
| 71 | Pump calibration |
| 72 | 6 Cylinder inclined pump(component-6) |
| 73 | Complete overhauling of F.I. pump |
| 74 | Providing and fitting ofElement |
| 75 | Providing and fitting ofDistance piece |
| 76 | Providing and fitting of Nozzle |
| 77 | Providing and fitting ofFlyweight Assembly 9413 035 256 |
| 78 | Pump calibration |
| 79 | Providing and fitting ofwater pump complete with part No. 851124 for TVRHD85 complete with hose, nipples, fittings etc as deemed fit for operation of pump |
| 80 | Providing and fitting ofsprinkler nozzles compatible with part No. 394297 of TVR HD85 |
| 81 | Providing and fitting ofHose pipe compatible with TVR HD85 part No. 107441 with clamps etc |
