Military Engineer Services-MES has published Tender For Addn / Altn To Certain Omqs At 1 Wing Air Force Station Srinagar. Submission Date for this Tender is 14-01-2023. Civil Work Tenders in srinagar Jammu And Kashmir. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 26-Dec-2022 | BOQ | BOQ | 07-01-2023 |
| 2 | 07-Jan-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-01-2023 |
| Sl. No. | Item Description |
| 1 | Taking down Shutters of any descriptionarea exc 1 Sqm and not exc 2 Sqm each, etc all as specified and directed by Engineer-in-Charge. |
| 2 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) not exc 1.50 Sqm each complete all as specified and as directed by the Engineer-in-Charge |
| 3 | Taking down chowkhats or frames with shutters (without taking off shutters from the frames) exc 1.50 Sqm but n exc 4.00 Sqm each complete all as specified and as directed by the Engineer-in-Charge. |
| 4 | Taking down & refixing of shutters of any descreption after easing and adjusting also refixing builders hardware as required including renewal of unserviceable screws, etc area of shutters n.exc 1 sqm each in same opening complete all as specified and directed. |
| 5 | Taking down & refixing of shutters of any descreption after easing and adjusting also refixing builders hardware as required including renewal of unserviceable screws, etc area of shutters exc 1 sqm and n exc 2 sqm each in same opening complete all as specified and directed. |
| 6 | M&L for Pressed steel frames of size 125 mm x 60 mm for doors with one or more rebates including necessary fixing lugs, lock strike plates complete, providing mild steel 6 mm dia thresh old bar and filling hollow of frame with plain cement concrete Type C-0, 1:3:6 (using 12.5 mm graded crushed stone aggregate) complete, all as specified. |
| 7 | M&L for PCC 1:3:6 type C1 using 20 mm graded stone aggregate as for fixing of holdfasts, etc including necessary formwork, complete all as specified and directed by Engineer-in-Charge |
| 8 | S&F Factory made Glazed and skeleton shutters 35 mm thick, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded,edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass/gauzeetc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); in second class hardwood, Complete all as specified and directed by Engineer-in-Charge |
| 9 | S&F 35 mm thick Factory made Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated, Complete all as specified and directed by Engineer-in-Charge |
| 10 | S&F Solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube and fixing in opening as specified and directed. |
| 11 | S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing all as directed. |
| 12 | S&F Powder Coated (minimum thickness of powder coating 50 micron) aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified. |
| 13 | S&F powder coated of any colour (Thickness or powder coating not less than 50 micron) aluminium window and ventilator shutters, side hung type without sashbars / Sliding windows, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays 150 mm long (1 no.) hinges type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified. |
| 14 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design / pattern, with approved standard section and fixed to the existing window frame with C.P. brass / stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge |
| 15 | S&F in repair 18 /19 mm thick Block boards, grade 2 quality, interior grade, commercial type, fixed with screwsto timber frame-work as in Kitchen drawers, Cupboard shuttersetc. |
| 16 | S&F 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer"s instructions |
| 17 | S&F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised., width of flaps when open in 30 mm, complete all as specified and directed by Engineer-in-Charge. |
| 18 | S&F Aluminium alloy, anodised, sliding door bolt 300 mm length with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy, complete all as specified and directed by Engineer-in-Charge |
| 19 | S&F 150 mm long Aluminium anodised, handle of extruded section fabricated type anodised and fixed complete all as specified and directed. |
| 20 | S&F Aluminium, anodised, barrel tower bolts 150 mm size of extruded section, complete all as specified and directed by Engineer-in-Charge. |
| 21 | S&F 125 mm long Aluminium anodised, handle of extruded section fabricated type anodised and fixed complete all as specified and directed. |
| 22 | S&F Aluminium, anodised, barrel tower bolts 125 mm size of extruded section, complete all as specified and directed by Engineer-in-Charge |
| 23 | S&F Butt hinges, stainless steel, 100 mm size, complete all as specified and directed by Engineer-in-Charge. |
| 24 | S&F 300 mm long mild steel ordinary rat tail rod pattern, door spring including roller and roller plate complete all as specified and as directed by Engineer-in-Charge. |
| 25 | S&Fsheet glass 3 mm thick, ordinary quality and glazing with oil putty / wooden beads in square or rectangular in section, n exc 0.5 sqm in each pane complete all as specified and directed by Engineer-in-Charge. |
| 26 | S&F Stainless steel wire cloth0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples |
| 27 | S&FFigured Glass pin head type 4 mm thick n exc 0.5 Sqm and glazing with oil putty,Complete all as specified and directed by Engineer-in-Charge. |
| 28 | S&F Floor door stopper of aluminium alloy body 140 mm cover plate and tounge, anodised with hard-drawn steel spring fixed in floor. |
| 29 | S&F 100 mm size hasp and staple, mild steel including bolt to hinge plate and fixed with screws complete all as specified and as directed by Engineer-in-Charge. |
| 30 | S & F 40 mm dia, cupboard knobs fixed with nut, screw and washer of brash, bright finished, complete all as specified and directed by Engineer-in-Charge. |
| 31 | S&F 100 mm size stainless steel handle fancy type for drawer etc, projecting drop (50 mm to 65mm) on screwed plate. |
| 32 | S&F in repair Stainless Steeldrapory rod 25 mm dia, fency type inculdingstainless steel finials and stainless steel brackets, Complete all as specified and directed by Engineer-in-Charge. |
| 33 | Dismantling wrought iron or mild steel work of any description not otherwise provided for |
| 34 | S&F Framedwork such as grills, gratings, etc. with ends of bars shouldered and / or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framedbalusters; walk ways; railings; framework of water tanksand similar work conforming to Fe.290.Gde-E-165 including dismentling of old steel work complete. |
| 35 | Dismantling wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards / slabs / blankets, any thickness, including cover fillets, & snap grid etc, complete all as specified. |
| 36 | M & L for Gl frame work for seamless ceiling comprising of Gl perimeter channnel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre/intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre, fixed in repairs, complete all as specified and directed by Engineer-in-Charge. |
| 37 | M&L for Providing and fixing Gypsum Board 12 mm thick (water proof) in ceiling fixed with screw or as per manufacturers instructions including necessary jointing and taping, complete all as specified and directed by Engr-in-Charge. |
| 38 | M&L for 6 mm thick Non asbestos fibre cement building fixed or laid / inserted to timber / GI / Aluminium framework with screws to ceiling flat or sloping, fixed in repair complete all as specified and directed by Engineer-in-Charge. |
| 39 | M&L for preparation of new or previouly untreatedplaster/ AC sheet surfacesof ceiling board including cornices and applying two coats of oil bound distemper over one coat primer and 1 mm thick cement base putty complete all as specified and directed by Engineer-in-Charge. |
| 40 | Dismantling of Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed by Engineer-in-Charge |
| 41 | S&F Pre- painted (In camouflage pattern) galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 42 | S & F Pre-painted (In camouflage pattern) galvalume aluminum zinc coating GI based Plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws complete all as specified and directed by Engineer-in-Charge. |
| 43 | S&F Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channelor flat sections) includingdistance pieces, cleats etc of quality-A, complete all as specified and directed by Engineer-in-Charge. |
| 44 | Demolition of RCC selves / cooking plateform (reinforement cut as required to facilitate demolition) and similar suspended work and removing debries form site all as specified and directed. |
| 45 | Use & waste form work to soffits & side of selves / cooking plateform flat, fair finished surfaces of concrete not exceeding 100 mm thick complete all as specified & directed. |
| 46 | M&L for RCC 1:2:4 using, type B0, using 12.5 mm graded stone aggregate as in selves / cooking plateform and similar work complete all as specified & directed. |
| 47 | M&L for mild steel TMT bars 10 mm dia and over cut to length bent to shape including cranking bending spirallay for hooping for columns hooking end and binding with and including mild steel wire (annelead) not less than 0.9mm dia or scuring with clips. |
| 48 | M & L for preparation of new wooden surface and applying two coats of synthetic enamel paint over a coat ofpink primer complete all as specified and directed by Engineer-In-Charge. |
| 49 | Demolition of floor, hearth or wall tiling or stone slab laid, bedded & pointed in any mortar including demolition of cement mortar bedding or backing coat, including rubbish off the premises, all as specified.. |
| 50 | M&L for20 mm thick granite (of any type) work (table rubbed and polished) as in steps, jambs, pillars, window cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over screed bed including half moulding of granite edgescomplete all as specified and directed. |
| 51 | M&L for 20 mm thick screed or bedding layer in cement mortar (1:4) for laying floor finishes, complete all as specified. |
| 52 | M&L 15 mm thick screed or bedding layer in cement mortar (1:4) for laying floor finishes, complete all as specified. |
| 53 | M&L for 10 mm thick rendring / backing coat in cement mortar (1:3) to receive wall tiles, complete all as specified. |
| 54 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set in neat cement slurry, making uniform 3 mm wide joint using spacer and filling the joint with epoxy grout to match the shade of tiles, laid over screed bed. |
| 55 | M&L for double charged colour vitrified ceramic tiles 10 mm thick (square) polished, area of each tiles n.exc 0.36 sqm in floors etc set in neat cement slurry, making uniform 5 mm wide joint using spacer and filling the joint with epoxy grout to match the shade of tiles, laid over screed bed. |
| 56 | All as peritemNo 55 above here-in-before but fixing of tiles as in in skirting / dado etc. |
| 57 | M&L for Non - skid Ceramic coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11sqm but not exceeding 0.18 sqm, in floors etc. set in neat cement slurry, making uniform 5 mm wide joint using spacer and filling the joint with epoxy grout to match the shade of tiles, laid over screed bed. |
| 58 | All as peritemNo 57 above here-in-before but fixing of tiles as in in skirting / dado etc. |
| 59 | M&L for coloured glazed ceramic tiles of size 600 x 300 x 7-8 mm thick, in vertical surfaces set in neat cement slurry, making uniform 3 mm wide joint using spacer and filling the joint with epoxy grout to match the shade of tiles, laid over screed bed. |
| 60 | M&L machine cut kota stone slab 20-25 mm thick as in floor, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed by Engineer-in -Charge. |
| 61 | M&L machine cut kota stone slab 18 - 20 mm thick as in dado / skirting, risers of steps laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing, complete all as specified and directed by Engineer-in -Charge. |
| 62 | Demolition of cement concrete (unreinforced) in ground floor and in paving n exc 15 cm thickness (below or above ground level), complete all as specified. |
| 63 | M&L for 75 mm thick cement concrete 1:3:6, type C-2, using 40 mm graded stone aggregate, as in Sub base for path / flooring complete all as specified and as directed. |
| 64 | M&L for rubbur molded glossy finish Chequered cement concrete tiles of size 30 cm x 30 cm x 25 mm thick, in white cement with pigment, set, jointed in neat cement slurry & pointed in coloured cement, as in floors / path / hardstanding, laid over screed bed complete all as specified and directed. |
| 65 | Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches, pillars, etc. and removing debries from site all as specified and directed. |
| 66 | M&L for brick work with sub class "B" Bricks (using old size bricks) straight or curved on plan exc 6m mean radius, built in CM 1:6, complete all as specified and as directed. |
| 67 | All as peritemNo 66 above here-in-before but except bricks. Note:- Old brick retrieved vide item No 65 above shall be reused. |
| 68 | M&L for Brick work with sub class "B" (using old size bricks) straight or curved of on plan to any radius in halfbrick thick walls built in CM 1:4 complete all as specified. |
| 69 | Taking down cement plaster of any description on brick or stone masonary wall, etc including racking out joints, hacking for key, scrubbing down with water etc, all as specified. |
| 70 | M&L for Rendering 10 mm thick in cement and sand mortar 1:6 on brick work or cement concrete surfaces of walls including finishing the surface even and smooth with using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 71 | M&L for Rendering 15 mm thick in cement and sand mortar 1:4 on brick work or cement concrete surfaces of walls including finishing the surface even and smooth with using extra cement complete all as specified and as directed by Engineer-in-Charge. |
| 72 | M&L for Rendering 5 mm thick in cement and sand mortar 1:3 onconcrete surfaces of ceiling, including finishing the surface even and smooth without using extra cement complete all as specified. |
| 73 | Complete removal of exsting treatment from wall surface including pilister & cornice etc of any descreption including cleaning brooming down or with steel wire brushing, scrapping down smooke soot, moulds, mossand efflorescent salts etc complete all as specified and as directed. |
| 74 | M&L for applying 3 mm thick cement base wall care putty in two coats on plastered surface of wall, and making the surafce even & smooth for reciving distemper / paint of any descreption all as specified & directed. |
| 75 | M&L forpreparation of newly applied putty surfaces of wall and applying two coats ofoil bound distemper over one coat of primer all as specified and directed. Note:- Cement base wall care putty where ever directed will be applied and will be measured & paid seperatly |
| 76 | M&L for Preparation ofold decorated surfaces of walls, pillars, cornices by brooming down or steel brushing, scraping down smoke roots. moulds , moss and efflorescence salts, trading oil greasy spots etc. andapplying one coat of oil bound distemper after removal of nails & filling nail hole with putty complete all as specified and directed by Engineer-in-charge. |
| 77 | M&L for applying 2 mm thick cement base wall care putty on plastered surface of ceiling, and making the surafce even & smooth for reciving distemper / paint of any descreption all as specified & directed. |
| 78 | M&L forpreparation of newly applied putty surfaces of ceiling and applying two coats ofoil bound distemper over one coat of primer all as specified and directed. Note:- Cement base wall care putty where ever directed will be applied and will be measured & paid seperatly |
| 79 | M&L for preparation of new plastered surfcae of wall surface including pilister & cornice etc of any descreption or surface obtained after complete removal of existing treatment and applyingtwo coats of exterior emulsion paintapplied as per manufacturer instruction over one coat of water based primer sutable for weather proof exterior emulsion paint, complete. Note:- This item will be executed over new plaster surface / surfcae obtained after complete removel of existing treatment. |
| 80 | Demolition of PCC of any description and in any position other than ground floor exc 15 cm thickness from sunken portions of toilet complete all as specified and directed. |
| 81 | M&L for plain cement concrete 1:5:10, type E-2, using 40 mm graded brick coarse aggregate, as in filling in sunken portion of toilet / mass concrete complete all as specified anddirected. |
| 82 | M&L for 25 mm thick PCC 1:2:4 type B0 (using 12.5mm graded stone aggregate) as in sub base for floor complete all as specified and directed. |
| 83 | M&L for 15 mm thick renderingin cement mortar 1:3 on sunken portion of toilet including mixing only liquid water proofing compound as per manufacturers instruction, finished the surface even and smooth without using extra cement complete. Note:- Liquid water proofing compound will be measured & paid separately. |
| 84 | Supply only Liquid water proofing compound |
| 85 | M&L for preparation of new plastered surface of sunken portion of toilet and applying 3 mm thick in two coats seamless epoxy water proofing coating on the entire surface, all as specified and directed. Make:- SHALIMAR SUPERCRETE / NITOBOND or equivalent as approved by GE |
| 86 | S & F 40 mm bore mild steel galvanised iron "medium grade" tubing, cut to size and fixed as spout pipe in sunken floor of toilet, fixed in cement mortar 1:3 complete. |
| 87 | Taking up or down 15 mm bore steel tubing and connections, from walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge. |
| 88 | Taking up or down 20 mm bore steel tubing and connections, from walls, floors or ceiling etc complete all as specified and as directed by Engineer-in-Charge. |
| 89 | M&L for Refixing of old 15 mm bore steel tubing and connections in new or old position on walls, ceiling or floors etc after cleaning including provn of new fittings all as directed by Engineer-in-Charge (old steel tubing retrived from item No 87 above shal be reused). |
| 90 | M&L for Refixing of old 20 mm bore steel tubing and connections in new or old position on walls, ceiling or floors etc after cleaning including provn of new fittings all as directed by Engineer-in-Charge (old steel tubing retrived from item No 88 above shal be reused). |
| 91 | S&F 15 mm bore tubes, "medium grade", galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified. |
| 92 | S&F 20 mm bore tubes, "medium grade", galvanised, with all fitting; (such as bends, elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps, plugs, unions etc) and fixed to wall / ceiling with clips, wall hooks, wooden plugs or laid in floors, complete all as specified. |
| 93 | M&L for cutting chases pinning in making good to facing where required and pointing in cement mortar (1:3) for concealed water tubing in brick walls cutting n.exc 10 cm girth. complete all as specified and directed. |
| 94 | M&L for Lagging to pipes 20 mm bore used in external water supply or plumbing all around with 50 mm thick bonded mineral wool pre-formed ‘SNAP ON’ pipe sections of density 144 Kg /Cum conforming to IS 9842 provided with chicken mesh wire netting 25 gauge 20 mm mesh complete all as specified and directed by Engineer-in-Charge |
| 95 | Supply and fix in repair white vitreous China wash hand basin (Flat back) of size 550 x 400 mm with full pedestal, fixed on and including new brackets complete including, 32 mm size brass chromium plated waste coupling, chain and plug and porcelain stopper, etc complete. |
| 96 | S&F in repair PVC connections 15mm size with PTMT nuts of length 600 mm, complete all as specified and as directed. |
| 97 | S&F in repair PVC waste pipe flexible for WHB of 32mm size complete all as specified and directed by Engineer-in-Charge. |
| 98 | S&F in repair 600 mm x 450 mm size bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC buildg board or commercial plywood and fixed to wooden plugs with CPbrass screws and cup washers complete all as specified and directed. |
| 99 | S&F in repair Mirror cabinet selected quality of size 450 mm x 600 mm PVC box type complete all as specified and as directed by Engineer-in-Charge. Make:-Prayag or equvallent make approved by GE. |
| 100 | Supply and fix in repairs white vitreous china squatting pan ‘ORISSA’ pattern of size 580mm x 440 mm white with integral foot rests with ‘P’ or ‘S’ trap, front or back inlet including all connection and provision of lime concrete base complete all as specified and as directed.. |
| 101 | S&F in repairs white Vitreous china wash down water closet (pedestal pattern) fixed in position with fixing bolt, including all connection complete. |
| 102 | S&F in repair PVC low level flushing cistern, duel type, valveless, syphonic action type, double push botton, 10 litres capacity with inlet, ball valve float and handle with and including brackets & PVC bend pipe 32 mm dia of required length and makingconnection complete complete all as specified. |
| 103 | S&F in repair white Plastic water closet seat cover, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device complete. |
| 104 | S&F in repair sinks with drainage board made of stainless steel 1mm thick for kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm including waste assembly, complete all as specified and directed. |
| 105 | S&Fin repairs stainless steel sink, 1.00 mm thick for kitchen or laboratory, with plug, washers, waste pipe including bedding in cement mortar on to draft wall or including fixing cantilever brackets, connecting union to pipe etc, overall size 495 mm x 420 mm, with bowl size 405 mm x 355 mm x 178 mm, including waste assembly, complete all as specified and directed. |
| 106 | S&F in repairs for 15 mm size bib taps, long body, fancy type, cast copper alloy chromium plated, with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed, all as specified. |
| 107 | S&F in repairs for 15 mm size two way bib taps fancy type, cast copper alloy chromium plated, with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed, all as specified. |
| 108 | S&F in repairs for 15 mm size angle cock fancy type, cast copper alloy chromium plated, with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed, all as specified. |
| 109 | S&F in repairs for 15 mm size two way angle cock fancy type, cast copper alloy chromium plated, with capston head, screwed down, screwed for iron pipe or for brass ferrule and fixed, all as specified. |
| 110 | S&F in repair brass chromium plated shower roses with swil joints, 80 mm sizein square with long shank arm including fixing to steel pipe or union, complete all as specified and as directed. |
| 111 | S & F in repairs 15 mm size sink mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge. |
| 112 | S & F in repairs 15 mm size central hole basin mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe including 450 mm long braided connection pipe complete all as specified and directed by Engineer-in-Charge. |
| 113 | S & F in repairs 15 mm size wall mixer for mixing hot & cold water, cast copper alloy chromium plated with capstan heads, high pressure, with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engineer-in-Charge. |
| 114 | S&F in repair brass chromium plated Jet Spray of Standard size for EWC alongwith CP connection and all fittings as fixed, complete all as specified and directed by Engineer-in-Charge. |
| 115 | S&F in repairs barss chromium palted Health faucet fixed with spring action and lever along with PVC flaxible pipe 1.2 mtr for supply of water fitted in the existing water connection in the toilets,Complete all as specified and directed by Engineer-in-Charge. |
| 116 | S&F in repairs, brass chromium plated towel ring of minimum dia 200 mm, complete all as specified and directed by Engineer-in-Charge. |
| 117 | S&F in repair Glass Shelf of size 500 mm x 125 mm wide with stainless steel wire guard fixed on wall with and including bracket and brass screws and wooden / plastic cleats. |
| 118 | S&F in repair Corner Glass Shelf of size 300 mm with stainless steel wire guard fixed on wall with and including bracket and brass screws and wooden / plastic cleats. |
| 119 | S&F in repair Tubular towel rail stainless steel chromium plated 20 mm dia D-type 60 cm long between flanges, including brackets and fixed to walls, complete all as specified and as directed by Engineer-in-Charge. |
| 120 | S&F in repairs, 100 mm dia stainles steel chromium plated grating, fixed in position with white cement Complete. |
| 121 | S&F in reapir Toilet paper holder cast copper alloy chromium plated fixed to walls with chromium platedbrass screws, complete all as specified and as direted by the Engr-in-Charge |
| 122 | S&F in repairs stainless steel chromium plated Soap dish, fixed to wall with plugs with cadmium plated brass screws complete all as specified and directed by Engineer-in-Charge. |
| 123 | S&F in repair 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, with PVC clamp all as specified. |
| 124 | S&F in repair 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls, with PVC clamp all as specified. |
| 125 | S&F in repair 75 mm dia PVC floor trap, with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete. |
| 126 | S&F 75 mm size PVC (SWR) bends of any radius, with access door, complete all as specified. |
| 127 | S&F 110 mm size PVC (SWR) bends of any radius, with access door, complete all as specified. |
| 128 | S&F in repairs 125 mm size PVC (SWR) "P’ trap complete all as specified and directedby Engineer-in-Charge. |
| 129 | S&F in repair Stainless steel plate rack made of 0.8 mm thick sheet, overall size 600 x 750 mm, with partitions, fixedto wall with PVC gutties and screws of suitable sizes, , complete all as specified and as directed by Engineer-in-Charge. |
| 130 | Supply and fix in repair 500 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete |
| 131 | Supply and fix in repair 1000 litres capacity double layer, rotational moulded, polythene water storage tank (Cylindrical vertical with closed top) hoisted and fixed on roof in position, including all fitting such as connection pieces with GI tank nipple for inlet, outlet, washout and overflow etc and including 20 mm size Ball valves high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe complete |
| 132 | S&F in repairs 20 mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. |
| 133 | M&L for Preparation of old painted wood and wooden base surfaces of any descriptionover 10 cm width or girth andpainting with one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 134 | M&L for Preparation of old painted steelsurfaces of any descriptionexc 10 cm width or girth andpainting with one coat of synthetic enamel paint complete all as specified and directed by Engineer-in-Charge. |
| 135 | Supply & Fix 100 mm size stainless steel handle, fancy type complete all as specified and directed. |
| 136 | Supply & fix 60 mm size stainless steel hinge, self closing, Italian pattern suitable for wooden cabinet door opening / closing operation complete all as specified and directed Make : Evershine / Olive / Godrej |
| 137 | Supply & fix 3 mm thick, PVC edge lipping, fixed with nails for 18/19 mm thick pre-laminated partical board & shutters etc, all as specified and as directed. |
| 138 | S & F Magnetic type catch fixed with screws to door frame complete all as specified and directed by Engineer-In-Charge. |
| 139 | Supply & Fix stainless steel telescopic channel of size25 mm x 12 mm,450 mm lenth (when closed) with male female rolling brackets suitable for baskets complete all as specified and directed, Make : Evershine, Olive or equivalent approved by GE |
| 140 | Supply & Fix Stainless steel, 304 grade, perforated cutlery basket of size 520 mm width, 485 mm depth and 100mm height completeall as specified. Make : Evershine, Sleek or equivalent approved by GE |
| 141 | Supply & Fix Stainless steel, 304 grade, Cup & Saucer basket of size 520 mm width, 485 mm depth and 100 mm height complete all as specified and directed. Make : Evershine, Sleek or equivalent approved by GE |
| 142 | Supply & Fix Stainless steel, 304 grade, designer Pull out detergent basket of size 100 mm width, 485 mm depth and 430 mm heightcomplete all as specified and directed. Make : Evershine, Sleek or equivalent approved by GE |
| 143 | Supply & Fix Stainless steel, 304 grade, designer plate basket of size 520 mm width, 485 mm depth and 150 mm heightcomplete all as specified and directed. Make : Evershine, Sleek or equivalent approved by GE |
| 144 | Supply & Fix Stainless steel, 304 grade designer pull out basket of size 810 mm width, 485 mm depth and 200 mm height complete all as specified and directed. Make : Evershine, Sleek or equivalent approved by GE |
| 145 | Supply & FixStainless steel, 304 grade designer Gas removal mesh of size 200 mm width and 100 mm height complete all as specified and directed. Make : Evershine, Sleek or equivalent approved by GE |
| 146 | M&L for second class hard wood plain fillets, square in section, clean sawn, secured with screws section area exc 13 Sqcm but n.exc 25 Sqcm, complete all as specified and as directed. |
| 147 | M&L for french polishing on surface of any description width or girth including cleaning and preparingthe surface including a coat of wood filler on new works with two or more coats,complete all as specified and directed by Engineer-In-Charge. |
| 148 | Taking down copper / aluminium point wiring (light, fan, socket & power) complet incl fixtures and fittings such as switches, ceiling rose, pendent holdes, regulators, sockets, etc and making good disturbed surface of wall, floor etc complete as specified and directed. |
| 149 | Material & Labour for point wiring for one light / Fan point controlled by one, one way switch complete with 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable 1100 volts grade ISI marked drawn and including PVC rigid conduit not less than 20 mm dia, including all accessories like bend, tees, junction boxes etc., 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed, fire retardant low smoke cable as a earth wire connected to common earth dolly, etc and including sunken type pressed steel terminal box of suitable size for modular type switch with cover plate & frame complete. Note - Colour code of cable Phase-Red Neutral- Black and Earth -Green) |
| 150 | All as per item No 149 above but point wiring for one light point controlled by two Nos two way switch on independent board |
| 151 | All as per item No 149 above but point wiring for one bell on independent board controlled by one bell push switch. |
| 152 | All as per item No 149 above but point wiring for one 5 / 6 Amps socket outlet on independent board controlled by one-way switch. |
| 153 | All as per item No 149 above but point wiring for one 5 Amps socket outlet on same board controlled by one-way switch. |
| 154 | All as per item No 149 above but wiring with 2.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable and 1.5 Sqmm multi-stranded copper conductor PVC insulated, unsheathed fire retardant low smoke, cable as earth wire connected to common earth dolly for 15 Amps multipurpose socket outlet on independent board, controlled with one way switch. |
| 155 | S&F modular one way switch 6 Amp 240 volt marked light / fan suitable for one moduel etc complete as specified and directed. |
| 156 | S&F modular two way switch 6 Amp 240 volt suitable for one moduel etc complete as specified and directed. |
| 157 | S&F modular bell push switch 6 Amp 240 volt suitable for one moduel etc complete as specified and directed. |
| 158 | S&F Modular 6 Amp 5 pin universal socket suitable for two moduel , 250 volts complete all as specified and directed. |
| 159 | S&F modular switch one way 16 Amps 240 volts suitable for one moduel complete as specified and directed. |
| 160 | S&F Modular 6 /16 Amp socketsuitable for two moduel , 250 volts complete all as specified and directed. |
| 161 | S&F modular step type two moduel fan regulator suitable for 120 watt 250 volts complete as specified and directed. |
| 162 | M&L for ceiling rose with three terminal as per relevant IS complete as specified and directed |
| 163 | M&L for call Bell ding dong AC 230 Volts, single pole. |
| 164 | S&F in repair energy efficient LED tube light fitting with built in LED & integral LED driver 18 to 20 watt, channel housing & diffuser of length 1200 mm (approx) with all accessories, fixing arrangement internally pre-wired,fixed in position & connecting complete all as specified and directed by Engg –in-charge. |
| 165 | S&F in repair energy efficient LED tube light fitting with built in LED & integral LED driver 10 watt, channel housing & diffuser of length 600 mm (approx) with all accessories, fixing arrangement internally pre-wired,fixed in position & connecting complete all as specified and directed by Engg –in-charge. |
| 166 | S&F in repair surface mounted round type energy saving ceiling mounted decorative LED 8 watt luminair with opal diffuser for soft light with suitable driveretc complete as specified and directed by Engr-in-charge |
| 167 | S&F Energy saving new generation 10 W LED IP 65 bulkhead luminair with opal diffuser etc complete as specified and directed by Engr-in-charge. |
| 168 | S&F modular type batten holder including 10 watt LED retrofit lamp fixed in position complete all as specified and directed. |
| 169 | Taking down unservicable sub main wiring of any descreption from any location with all acessaries complete as specified and directed by Engr-in-charge |
| 170 | Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable of size 6.0 Sqmm, PVC insulated, unsheathed, fire retardant low smoke, drawn through and including heavy duty rigid PVC conduit not less than 20 mm dia with all necessary fitting and including one run single core multistranded copper conductor cable, of size 6.0 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling, complete. Note: (i) 2 Runs of main cable and one run earth wire with conduit will be measured as one Unit for payment. |
| 171 | Material & Labour for sub main wiring with 2 run single core multistranded copper conductor cable of size 10.0 Sqmm, PVC insulated, unsheathed, fire retardant low smoke, drawn through and including heavy duty rigid PVC conduit not less than 20 mm dia with all necessary fitting and including one run single core multistranded copper conductor cable, of size 10.0 Sqmm, PVC insulated, unsheathed, fire retardant low smoke as earth wire, fixed on wall / ceiling, complete. Note: (i) 2 Runs of main cable and one run earth wire with conduit will be measured as one Unit for payment. |
| 172 | Disconnecting the electric line from existing old DB and taking down old DB with all fitting fixture, complete, all as specified & directed by Engineer-in-Charge. |
| 173 | Supply & fix AC control box with plug & scocket and inbuilt 25 Amps MCB SPN in sheet steel enclouser, fixed concealed in wall complete all as specified & directed by Engineer-in-Charge. Make:- Havells Cat No DHDDCDP025202503 or equvallent of make L&T / C&S / Legrand. |
| 174 | S&F epoxy powder coated or polystrene insulated material sheet metal enclosure factory made (double door)12 way SPN suitable for MCB with 200 Amps rated busbar, neutral & earthing link bar, flush / surface mounting complete all as specified anddirected |
| 175 | S&F Epoxy powder coated or polystrene insulated material sheet metal enclosure, factory made (double door)4 way VTPN (IP54) suitable for incommer MCCB with 200 Amps rated busbar, neutral and earthing link bar, flush / surface mounting,complete all as specified and directed by Engineer-in-Charge. |
| 176 | S&F MCBsingle pole `C" series working on 240 Volts 50 HZ AC supply for incomming and out goingcontrolling cercuit of capacity 6-32 Amp breaking capacity 10 KA etc all as specified and directed. |
| 177 | S&F MCBsingle pole "C" seriesworking on 240 volts 50Hz AC supply for incomming & out going controlling system of capaicty40 Amps 10 KA breaking capacity etc all as specified and directed. |
| 178 | S&F MCBsingle pole and neutral `C" seriesworking on 240 volts 50HZ AC supply for incomming & out going controlling system of capaicty63 Amps 10 KA breaking capacity etc all as specified and directed. |
| 179 | S&F MCCBthree pole working on 415 volts 50 Hz AC supply for incomming & out going controlling system of capaicty100 Amps, 16 KA breaking capacity lcs=100 % lcu etc all as specified and directed. |
| 180 | Disconnecting all water and electric connections of geysers and taking down carefully storage type electric geysers of 50 litre capacity of any make / type / size (horizontal / vertical) lowering and setting aside, complete overhauling by opening geysers, examining and checking thoroughly, tighting of all water and electric connection, removing all scale and dirt de-scaling of deposited in inner copper tank and outer tank and heating elements with descaling solution or aqua clear pedilite solution, thermostat, indicator lamp, assemble checking electrical connection, stopping of minor leaking by soldering / brazing of the inner copper tank, re-fixing geyser in its original location including hoisting, connecting to water & electric connection and testing for proper functioning of geysers including earthing to the entire satisfaction of the Engineer-in-Charge. |
| 181 | Note - (i) Contractor will Employ proper skilled electrician and helpers with necessary tools, safety equipments for attending geyser complaint as directed by EIC. (ii) Supply only flexible pipe & Painting of geyser will be measerd and paid seperatly. |
| 182 | M&L for preparation of old painted outer surface of geyser of capacity 50 Litres by scraping, cleaning, knotting and stopping including rubbing with ammery paper and applying one coat duco paint (first quality) by spray painting machine to achieve glossy finish, re write MES No. on the body of geyser with black synthetic enamel paint (letters and figures 2 cm high) complete all as specified & directed. |
| 183 | Supply only Fiber reinforced PVC flexible pipe (Flexi connection pipe), heavy duty size 450 mm long15 mm bore with brass chromium plated nut on both end, with rubber washers. |
| 184 | Taking down carefully ceiling fan of any sweep and make, for overhauling by dismantling of blade, opening and examining motor winding, cleaning of dust / dirt, greasing of ball bearing and bushes with fresh oil / grease, checking of capacitor, reassembling of fan, hanging in original location after replacemnet of rubber real, 3 core copper connecting cable of size 1.5 Sqmm and testing ceiling fan for smooth functioning complete all as specified & directed. Note:- Painting of fan will be measured & paid seperatly. |
| 185 | Taking down carefully exhaust fan of any sweep and make, for overhauling by dismantling of blade, opening and examining motor winding, cleaning of dust / dirt, greasing of ball bearing and bushes with fresh oil / grease, checking of capacitor, reassembling of fan, fixing in original location, after replacemnet of 3 core copper connecting cable of size 1.5 Sqmm and testing ceiling fan for smooth functioning complete all as specified & directed. Note:- Painting of fan will be measured & paid seperatly. |
| 186 | M&L for prepation of old painted surface of ceiling fan of any sweep with emmery paper, and applying one coat of synthetic enamel paint with spray painting machine & rewriting MES No. with black paint complete. |
| 187 | M&L for prepation of old painted surface of exhaust fan of any sweep with emmery paper, and applying one coat of synthetic enamel paint with spray painting machine & rewriting MES No. with black paint complete. |
| 188 | Material and labour for renewal of earthing complete with galvanized iron earth plate electrode 600 mm x 600 mm x 6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m deep below normal ground connected togalvanized steel wire of size 4 mm dia by means of bolts nuts check nuts and washer of galvanized steel, watering pipe of 20 mm bore, galvanised iron, medium grade, and 15 mm bore galvanised iron light grade for earth strip protection, including all excavation earth work in any type of soil, covering the plate with alternate layer charcoal (250 kg) & salt (200 Kg), PCC pit in PCC 1:2:4 type B-1 and RCC 1:2:4, type B1 for precast chamber cover 50 mm thick, reinforced with welded steel wire fabric or XPM Jali (weight not less than 4.00 Kg / sqm), funnel, complete all as shown in the electrical plate No 3 of SSR part –I and testing on completion. |
| 189 | Note:- Quoted rates shall be deemed to include for earth wire with protection pipe up to 7.5 M length. |
| 190 | Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth, for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n. exc 10 sqm on plan and n exc 1.5 m in depth and getting out in soft / loose soil for foundation of pole, stay, laying of cable and pipe in any type of soil, complete all as specified and directed. |
| 191 | Returning filling in including spreading, levelling, watering and well ramming in layers n.exc 25cm thick using excavated soil complete all as specified and directed by Engineer-in-Charge. |
| 192 | Removing excavated material n exc. 50 m and depositing where directed at a level n. exc 1.5 m above the starting point, complete all as specified and directed. |
| 193 | M&L for providing dry river sand as in sand cushioning below and above cable thickness as specified in SSR to under ground cable including punning down of sand in layer all as specified and directed by Engg-in-Charge. Note: for measurement purpose punned thickness of sand will be considered. |
| 194 | M&L for laying of bricks well burnt, sub class B (old pattern), laid flat for cable protection width equal to the length of bricks complete all as specified and directed |
| 195 | Supply & laying XLPE insulated, PVC inner sheathed, armored with galvanised steelstrip or wire, heavy duty, LT underground cable with aluminium multistranded conductor of size 35 Sqmm 3.5 Core, 1100 volt grade conforming to IS 1554 part I / ISI marked,laid in trenches / duct passing through pipe / duct/ concealed in walls or fixed along pole and connecting and testing including taking down old cable complete. Note:- Earthwork, sand cushion, cable cover will be measured and paid separately under respective items of this Schedule. |
| 196 | S&F in repair 40 mm bore mild steel galvanised tubing, light grade, with all fittings and fixed to walls or laid in floors / fixed to poles / or passing under road crossing, for protection of XLPE cable, complete all as specified and directed by Engr-in-Charge. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
