|
| 1 | Clearing grass and removal of the rubbish upto a dncetance of 50 m outside the periphery of the area cleared. |
| 2 | Dismantling old plaster or skirting raking out & cleaning the surface for re-plaster i/c disposal of rubbish to the dumping ground within 50 metres. |
| 3 | Removing white or colour wash by scraping and sand papering the surface including necessary repairs to the scratches etc. |
| 4 | Repairing to plaster of thickness 12mm to 20 mm in patches of area 2.5 sq. meter and under including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete including disposal of rubbish to the dumping ground within 50 m lead |
| 5 | (a) With cement mortar 1:4 (1 cement: 4 fine sand) |
| 6 | 12 mm cement plaster finished with a floating coat of neat cement of mix 1:3 (1 cement: 3 fine sand) |
| 7 | Providing and appying white cecent based putty of average thickness 1mm, of approved brand and manufcture, over the plastered wal surface to prepare the surface even and smooth complete. |
| 8 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic compound) content |
| 9 | Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade |
| 10 | One or more coats on old work |
| 11 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade |
| 12 | One or more coats on old work |
| 13 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade |
| 14 | old work (one or more coats) |
| 15 | Providing and fixing aluminium work for doors, windows,ventilators and partitionswith extruded built up standard tubularsections/ appropriate Z sections and other sections of approvedmake conforming to IS: 733 and IS : 1285, fixed with rawl plugs andscrews or with fixing clips, or with expansion hold fastenersincluding necessary filling up of gaps at junctions, at top, bottomand sides with required EPDM rubber/ Neoprene gasket etc.Aluminium sections shall be smooth, rust free, straight, mitred andjointed mechanically wherever required including cleatangle,Aluminium snap beading for glazing / panelling, C.P. brass /stainless steelscrews, all complete as per architectural drawingsand the directions of Engineer-in-charge. (Glazing and panelling tobe paid for separately): |
| 16 | Anodised aluminium (anodised transparent or dyed to requiredshade according to IS: 1868, Minimum anodic coating of grade AC15) |
| 17 | Providing and fixing glazing aluminiun window, ventilators shutters and aprtition etc. with EPDM rubber/neoprne gasket etc. complete as per architectural drawings and the directions of Engineer in charge (Costofa aluminium snap beading shall be paid in basic item) |
| 18 | C) With float glass panes of 4.0 mm thickness |
| 19 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering |
| 20 | All work upto plinth level |
| 21 | 1:4:8 (1 cem : 4 C/sand : 8 graded stone aggrt 40mm) |
| 22 | 1:2:4 (1 cem : 2 C/sand : 4 graded stone aggrt 20mm) |
| 23 | Reinforcement for RCC work i/c straightening, cutting, bending, placing in position and binding all complete. Above plinth level |
| 24 | TMT bars |
| 25 | Suspended floors, roofs,landings, balconies and access platform |
| 26 | Reinforced cement concrete work in beam, suspended floors, roof having slope up to 15\" landing, balconies,shelves , chajjas, lintal, bands,plain window sill, stair cases, and spiral stair cases up to floor five level excluding the costof centering and shuttering , finishing and reinforcement with |
| 27 | 1:1.5:3 (1 cem 1.5 c/sand: 3 draded stone aggrt 20 mm mom size) |
| 28 | Providing and laying polished granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone alab over 20mm (average) thick base of cement mortar 1:4 (1 cem :4 C/sand) laid and pointing with cement slurry admixed with pigment of matching shade i/c rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-charge. |
| 29 | Polished Granite stone slab jet black, cherry red, elite brown, cat eye or equvalent. |
| 30 | Providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc. including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete. i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge,(for payment purposed only weight of stainless steel members shall be considered excluding fixing accessories such as nuts,bolts,fasteners etc.) |
| 31 | Earth work in excavation by mechanical means (Hydraulic Excavator)/ manual neans in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms lift upto 1.5 metres including getting out the excavated soil and disposal of surplus excavated soil as directed within a lead of 50 metres |
| 32 | All kinds of soil |
| 33 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering-All work upto plinth level |
| 34 | 1:4: 8 ( 1 cement : 4 coarse sand : 8 graded stone aggrt. 40mm nominal size). |
| 35 | ii).1 :2: 4 (1cem :2 c/sand : 4 graded stone aggrt. 20 mm nominal size. |
| 36 | Neat cement punning |
| 37 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved stell primer using steel etc. as required. |
| 38 | 1)In grating, frames, guard bar, railing, brackets and similar works. |
| 39 | Steel work in built up tubular (round, square or rectangular tubes etc.) trusses etc., including cutting, hoisting fixing in position and applying a priming coat of approved steel primer, including welding and bolted including special shaped washers etc. complete. |
| 40 | Hot finished welded type tubes |
| 41 | Foundation footing bases of column etc. mass concrete. |
| 42 | Brick work with 1sst class common burnt clay F.P.S. (non modular) bricks in foundation and plinth in |
| 43 | Cement mortar 1:4 (1 cem: 4c/sand) |
| 44 | Providing and fixing precoated galvanised iron profile sheets (sizes, shape and pitch of corrugation as approved by Engineer-in-charge) with Zinc coated 120 grams per sqm as |
| 45 | Precoated galvanised iron profile sheets 0.35mm thick |
| 46 | Finishing wall with water proofing cement paint of required shade |
| 47 | old work (one or more coats @ 2.2 kg/10 sqm) complete. |
| 48 | Two or more coats glue sizing with spar varnish or an under coat of flatting varnish. |
| 49 | Providing & fixing door, windows & cl/ window framed, shutters glazed as directed by the Engineer in charge |
| 50 | Providing and fixing panelled or panelled and glazed shutters for doors, windows and |
| 51 | 35mm thick shutters |
| 52 | Providing and laying rectified Glazed Ceramic floor tiles 300x300mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in all colours, shades, except white, ivory, grey, fume, red Brown, laid on 20mm thick cement Mortar 1:4 (1 cement:4 coarse sand) including pointing the joints with white cement and matching pigments etc. complete. |
| 53 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,having thermal stability for hot & cold water supply including allCPVC plain & brass threaded fittings This includes jointing of pipes& fittings with one step CPVC solvent cement, trenching, refilling &testing of joints complete as per direction of Engineer in Charge. |
| 54 | Renewing glass panes, with putty and nails wherever necessary |
| 55 | Float glass panes of thickness 4 mm |
| 56 | Providing and relaying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. (without cost of pavar block) |
| 57 | 60 mm thick C.C. paver block of M-30 grade with approved color design and pattern. |
| 58 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. (without cost of pavar block) |
| 59 | 60 mm thick C.C. paver block of M-30 grade with approved color design and pattern. |
| 60 | Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for allheights and all levels etc. including: |
| 61 | b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers,cleats, weather silicone sealant, backer rods etc. |
| 62 | Providing and fixing UPVC( unplasticized polyvinyl chloride) work for doors, windows, ventilators and partitions with extruded built up standard sections 65x100 MM, 60x75MM extrudwd styles and rails etcfixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides including handles, locking arrangement, all complete as per the directions of Engineer-in-charge using 12mm thick glazing glass of approved brand. |
| 63 | Dismantling aluminum partition/gypsum partition, doors, windows, fixed glazing and false ceiling including including disposal of unserviceable surplus material and staking of serviceable material within 50metre lead as diected by Engineer-in-charge. |
| 64 | Half brick circular tree guard, in 2nd class Brick, internal diametre 1.25 metres, and height 1.2 metre, above ground and 0.20 metre below ground ( half brick circular tree guard, in 2nd class brick, internal diametre 1.25 metre, and height 1.2 metre, above ground and 0.20 meter below ground, bottom two courses laid dry, and top three courses in cement mortar 1:6 (1 cement 6 sand) and the intermediate courses being in dry honey comb masonry, as per design specification. |
| 65 | Planting of trees and their Maintenance for one year (planting of trees by the road side (avenue trees) in 0.60m dia holes, 1m deep dug in the ground, mixing the soil with decayed farm yard/sludge mannure, planting the saplings, backfilling the trench, watering,fixing the tree guard and maintaining the plant for one year |
| 66 | Dismantling wooden boardings in lining of walls and partitios, excluding supporting members but including stacking within 50m lead |
| 67 | upto 10mm thick |
| 68 | Providing wood work in frames of false ceiling, partition etc. swan and put up in position. |
| 69 | Local best quality uningthou wood |