Tender For Construction And Installation Of 3Mtpd Biogas Plant At Kallaraimedu In Kodaikanal Municipality
Tender Value
99.50 Lakhs
Estimated cost
Bid Submission
27 Dec 2022
0 days left
EMD
99500
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
kodaikanal → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction And Installation Of 3Mtpd Biogas Plant At Kallaraimedu In Kodaikanal Municipality
BOQ
| Sl. No. | Item Description |
| 1 | Earthwork for foundations in all soils and subsoils to full depth as may be directed,except in hard rock requiring blasting including shoring, strutting and baling out water wherever necessary and refilling the sides of foundations with excavated earth in layers not exceeding 15 cm thick,well rammed and consolidated and depositing the surplus earth in places shown within initial lead and lift including levelling the site etc. complete complying with standard specifications. (Footings) |
| 2 | Supplying and filling in foundation andbasement with Crushed Stone Sand (M- Sand) in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. |
| 3 | Supplying and filling in foundation and basement with well gravel layer not more than 15cm thick well ramped watered and compacted etc,. Complete with standard specification |
| 4 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 5 | Centering for soffits of RCC Slabs of plane surface like lintels, beams, etc., including strutting 3m high using mild steel sheets of size 90cm x 60cm x and B.G 10 stiffened with M.S angles of size 25mm x 25mm x 3mm laid over silver oak (C.w) joists of size 10cm x 6.5cm (spaced at about 90cm c/c) and supported by casurina props of 10cm to 13cm dia (spaced at 75cm c/c) complying with standard specification and directed - 10m² (P & D) |
| 6 | Providing and laying in position Standardised Concrete Mix M-25 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 350Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of Crushed Stone sand (M- Sand) but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requiremnents of IS standards. |
| 7 | Flooring and Base |
| 8 | Digestor & Feeding Platform |
| 9 | Slurry Tank & Others |
| 10 | Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors. |
| 11 | Brickwork in CM 1:5 (One Cement & Five Crushed Stone Sand (M- Sand) using II class ground moulded bricks of size 9\" X 43/8\"X 2 3/4\" including finishing, curing, etc., complete complying with standard specification - 100CFT |
| 12 | Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications |
| 13 | Paving the floor with best quality Double Charged Vitrified Tiles of size 600 x 600 x 8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification.(The make and brand of the tiles should be got approved by Executive Engineer before use on works) |
| 14 | Supplying and fixing in position best quality PVC soil/waste pipe (6KSC) of various size having ISI marks and providing leakproof joints including fixing to the wall PVC/Ms clamps etc., and making connection to all sanitary fittings, dismandling masonry /RCC works complying with standard specification |
| 15 | 75 mm PVC Pipe |
| 16 | Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. |
| 17 | Painting two coats with ready mixed Plastic Emulsion Paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. - 10 sq.m |
| 18 | Fabricating supplying and fixing of pre painted galvanized iron sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. |
| 19 | Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification |
| 20 | Supply of Gas Holder: UV resistant five layer FRP segments made up of fiber reinforced plastic of five layers 450 emulation glass matt and isopathallic resin and gel coat segments molded in fiber reinforced plastic mould with ribs for strengthening around gas holder, Mild Steel structure inside to support and strengthening the gas holder. |
| 21 | Supply of Slurry Tank Cover: UV resistant five layer FRP segments made up of fiber reinforced plastic of five layers 450 emulation glass matt and isopathallic resin and gel coat segments molded in fiber reinforced plastic mould with ribs for strengthening around gas holder, Mild Steel structure inside to support and strengthening the gas holder. |
| 22 | Supply of H2S Scrubber: UV resistant five layer FRP segments made up of fiber reinforced plastic of five layers 450 emulation glass matt and isopathallic resin and gel coat segments molded in fiber reinforced plastic mould with ribs for strengthening around gas holder, Mild Steel structure inside to support and strengthening the gas holder. |
| 23 | Supply of Conveyor for Feeding -Stainless steel 304 grade, 4m length, 76mm dia shaft, 50mm dia center pipe, 5mm screw plate, 200mm x 200mm pitch, 2ft U trough, 1.5ft topdoor hinge type for easy maintenance, 2HP gear motor |
| 24 | Supply of Food waste shredder -Mild steel 12 gauge / 2.8 mm thickness Customized 5 HP motor grinder with mild steel plate, harden steel blades, grinding size 3mm to 6mm and One set of spare blades. Heavy duty bearing, over load alarm, easy feeding system.Foundation size as per site requirement |
| 25 | Supply of Inlet screw motor -Customized 2 HP, 3 phase motor with speed reduction gear box, Center rotating screw, steel housing with bearing, Bottom supporting with steel ball and ball bearing.9inches(inner dia) Cement pipe |
| 26 | Supply of outlet screw motor -Customized 2 HP, 3 phase motor with speed reduction gear box, Center rotating screw, steel housing with bearing, Bottom supporting with steel ball and ball bearing.9inches(inner dia) Cement pipe |
| 27 | Supply of Hydraulic Agitator for Digestor - Customized Hydro motor, High pressure Rubber hose, Center rotating pipe, steel housing with bearing, Bottom supporting with steel ball and ball bearing |
AI Tender Summary
Tender Timeline
Dec 16, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 27, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 27, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender