Tender For Special Repairs To Or Md Accn For Bldg No P-02 Of 554 Asc Bn And Or Single Living Barrack For Bldg No T-55 Of 60 Coy Asc Under Ge South Secunderabad
Tender Value
48.12 Lakhs
Estimated cost
Bid Submission
12 Jan 2023
0 days left
EMD
96240
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
secunderabad → Telangana
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Special Repairs To Or Md Accn For Bldg No P-02 Of 554 Asc Bn And Or Single Living Barrack For Bldg No T-55 Of 60 Coy Asc Under Ge South Secunderabad
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 26-Dec-2022 | amendment No -1 | Other | 05-Jan-2023 |
| 2 | 05-Jan-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 12-Jan-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L hard core of gauge n exc 63 mmbroken stone or boulders deposited ,spread and levelled in layers n exc 15 cm thick watered and rammed to a true surface. |
| 2 | M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in base of water tank on roof surface complete all as specified and as directed. |
| 3 | M&L PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in hold fast and similar work. |
| 4 | Supply only integral water proofing compound. |
| 5 | M&L brick work with subclass B bricks ,straight or curved on plan exc 6m mean redius built in cm 1;6 |
| 6 | M&L brick work with sub class \"B\" bricks straight or curved on plan to any radius in half brick thick wall built in cement motor 1:4 |
| 7 | Cutting chases, pinning in brick walls, making good to facing where reqd and pointing in CM 1:3 to ends of edges of landing etc and cutting chases for concealed water tubing and making good cutting exc 10 cm but n.exc 20 cm girth. |
| 8 | Material & labour 2nd class hardwood plain, solid straight chowkhats and frames, wrought, framedrebated on the solid,rounded or chamfered, puttogether with glue pinned at joints, 2nd class HW. |
| 9 | S &F2nd class hardwood 35mm thick glazed and skeleton shutters open rebated and prepared to receive glass gauze etc divided into squares, with plain, chamfered or rounded mitred and rebated sash bars any number edges of framing plain, chamfered or rounded, fitted with cut and metered beads for securing glass etc size of members of shutters as specified in SSR Part I Sec 8 clause 8.24 (a) and stainless steel wire cloth 0.36 mm nominal dia of wire complete all necessary fitting complete all as specified and as directed |
| 10 | S&F 35mm thick 2nd class hard wood factory made plain, framed,panelled shutter (two panel) with lock rail & panel of 9mm BWP commercial ply seasoned & chemically pressure treated/12mm veneered, particle board with commercial veneering on both faces.The size of rail & steel as per IS : 1003 (Part I) kiln seasoned & chemically pressure treated. |
| 11 | Taking down frames with shutters (without taking off shutters from the frame ) area not exc 1.5 Sqm Each incl iron mangery complete. |
| 12 | Taking down frames with shutters (without taking off shutters from the frame) area exc 1.5 Sqm but n.exc 4 Sqm Eachincl iron mangery complete. |
| 13 | supply and fixing factory made solid panel PVC door shutter 30 mm thick (style)consisting of frame made out of MS tubes for top and bottom rail. MS frame shall be covered with heat moulded plain colour PVC \"C\" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the M.S frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling & fixing in the frame at site as per specification and drawing. |
| 14 | S&F PVC door frame of size 50x47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube all as directed |
| 15 | S & F 100mm longAluminium anodisedbarrel tower bolt of extruded section . |
| 16 | S & F alluminium anodized barrel tower bolts, 150mm long of extruded section complete all as specified and directed. |
| 17 | S & F 200 mm longAluminium anodisedbarrel tower bolt of extruded section . |
| 18 | S & F 300 mm long mild sliding door bolt, plate type, stove enameled black with bright bolt not less than 12 mm dia with including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate complete all as specified as directed |
| 19 | S & F 100mm size mildSteel butt hinges medium weight cold rolled. |
| 20 | S & F 100 mm long extruded Aluminium alloy anodised Butt hinges with galvanized mild steel hingepin type C 21. |
| 21 | S & F 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish orelectro galvanised. |
| 22 | S&F 300 mm ordinary mild steelrat rail rod pattern spring including roller and roller plate complete |
| 23 | S & F extruded aluminium alloy handles, fabricated type anodized 125 mm size complete all as specified and directed. |
| 24 | S&F 100 mm lengthAluminiumhandles fabricated type anodised |
| 25 | S&F 150 mm lengthAluminiumhandles fabricated type anodised |
| 26 | S&F for aluminium anodised 100mm hasp and staple, safety type, brass with mild steel hing pin incl bolt to hinge plate and fixed with screws. |
| 27 | S & F fancy type teak wood finished curtain rod with fancy type braket.Braket to be fixed with (0.075x0.085x0.075)mm teak wood girth insert to wall with cement mortar 1:3 |
| 28 | S&F in repairs anodised aluminium alloy curtain rail, cromium plated with fixing brackets, stops, roller etc complete all as specified and directed. |
| 29 | S&F in repairs 600mm long tubular tower rail brass chromium plated 20mm dia, D type 60cm longfixedwith two plugs (Gutties) of 2nd class hard woodembeded in cement mortor 1:3 with MS screwscomplete all as specified. |
| 30 | S & FFloor door stopper 150mm long of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor |
| 31 | S & F Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples complete all as specified and directed |
| 32 | M&L forMild Steel flat ironas in hold fast supplied and fixed including tarring complete. |
| 33 | S & F Rolled sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters (beam, tee, angle, channel or flat section) including distance pieces cleats etc confirming to grade Fe-410 W E250 quality A. all as specified and as directed . |
| 34 | S & F, steel windows double shutter (one side glazed type and other side gauzed type) with pressed steel frame and side hungshutters including projecting or box type hinges with steel handle & steel peg stay, complete with glazing bars, dovetailed or welded with stainless steel wire cloth 0.36mmnominal dia of wire and fixing of sheet glass ordinary quality 3 mm thick fitted with beeding/putty oil complete all as specified and as directed. |
| 35 | M&L for pressed steel frames for doors with one or more rebates including necessaryfixing lugs, hinges, lock strike plate etc.complete , of frame size 125 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified |
| 36 | M&L for pressed steel frames for doors with one or more rebates including necessaryfixing lugs, hinges, lock strike plate etc.complete , of frame size 105 x 60 mm, including one shop coat of red oxide zinc chrome primer complete all as specified |
| 37 | M&L for PCC for filling hollow of steel frames type B0 (1:3:6 )(using 12.5mm graded aggregate etc complete all as specified and directed. |
| 38 | S & F anodised aluminium snap grid size of grid 605 X 605mm frame work for false ceiling all as specified and directed. |
| 39 | M & L Hangers 6mm dia GI (upto 1200mm length) adjusting level fixed to roof slabs by means of ceiling cleats made out of GI flat 40 x 3mm size 60mm long and expansion hold fasteners 12.5mm dia, 40mm long complete all as specified. |
| 40 | M&L Pre painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of anycolour having tensile strength of 550 Mpa as in roof covering/ cladding towall, fixed with self tapping screws complete all as specified and directed. |
| 41 | S&FPre painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strengh of 550 mpa as on roof covering/ridgesfixed with self tapping screws complete all as specified and directed. |
| 42 | S & F 18/19 mm thick Prelaminated Particle Board, interior grades, prelaminated one sides with decorative choice laminated & other sides balancing white lamination, fixed to screws to timber frame work |
| 43 | M&L for machine cut kota stone slab flooring 20-25 mm thick in riser of steps, skirting, dado and pillar laid over cement screed andjointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified. |
| 44 | M & L for cement concrete 1:3:6 type C-1, 75 mm thick using 20mmgraded stone aggregates as in plinth protection finished fair and even with using extra cement. |
| 45 | M&L for25 mm thick PCC 1:2:4 type B0 using 12.5mm graded aggregate as in level course on floor etc complete all as specified and as directed. |
| 46 | M&L Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed. |
| 47 | M&L for non skid colouredtiles 7 to 8 mm thick area of each tile exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointedin white or coloured cement to match. |
| 48 | M&L for non skid coloured tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exc 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointedin white or coloured cement to match. |
| 49 | All as per item No 48 abovebut on vertical surfacesas in skirting/dado level etc. |
| 50 | Dismantling floor hearth or wall tiling including cement mortar bedding but not backing. |
| 51 | M&L for rendering 10 mm thick in CM 1:4 mixed with integral water proofing compound as per manufacture\"s instructions as in roof and chajjas, finished the surface fair and even .(Note : Supply of water proofing compound will be measured and paid separately .) |
| 52 | M&L for 15 mm thick screed bed in cement mortar 1:6 for layingfloor finishes under floor. |
| 53 | Taking down cement plaster and raking out joints, hacking for key,scrubbing down with water built in cement mortar any description. |
| 54 | S & F 3mm thick sheet glass, ordinary quality, glazing with oil putty or fixed with wooden beads or in steel windows in square n.exc. 0.50sqm each pane complete all as specified & directed |
| 55 | M & L preparation of new or previously untreated wooden surfaces of any description, not other wise described over 10 cm width or grith and apply two coat of synthetic enamel paint over a coat of pink primer all as specified and directed |
| 56 | M & L for two coats of synthetic enamel paint on steel surface of any description over 10cm width or grith including preparation of new surfaces and applying one coat of Red oxide primer |
| 57 | Taking up or down GI tubing 15mm dia. |
| 58 | Taking up or down GI tubing 20mm dia. |
| 59 | S&F GI tubing of 15mm bore medium grade with all fittings completely fixed to walls or laid in floors etc. |
| 60 | S&F GI tubing of 20mm bore medium grade with all fittings completely fixed to walls or laid in floors etc. |
| 61 | S&F in repair rotational moulded polyethylene water storage tanks 500 lts(cylinderical vertical with closed top) hoisted and fixed in position all as specified in SSR part 1. |
| 62 | S&Frepairs CPStop valves cast copper alloy,fancy type,with iong shank and cup,bore15mm, fixed in repairs. |
| 63 | S & F Gun metal globe or gate valve 20mm , with iron wheel head screwed both ends for iron pipe and loud in repairs. |
| 64 | S&F 20mm ball valve high pressure with polythylene float valve and fly nut complete screwed for iron pipe PTMT. |
| 65 | S&F in repairs PVC connection 15mm dia and 45cm long with two Nosof brass checknuts and washers complete. |
| 66 | S&F110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall. |
| 67 | S&F75 mm PVC (SWR) pipes single socket in any lenth with rubber ring joints fixed to wall. |
| 68 | S&F 110 mm PVC (SWR) vent cowl. |
| 69 | Dismantling of cast iron drain pipe 75mmdia from floor/walls etc and taking out oftrenches/floors. |
| 70 | S & F 75mm dia, PVC (SWR) floor trap, plain with grating including jointing with solvent cement in repair complete all as specified and as directed. |
| 71 | PVC (SWR) gully trap 125/110 mm, settting and jointing with solvent cement in repair. |
| 72 | S&F Sheet glass shelf assembly consisting of 5.5mm thicksheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long |
| 73 | S&F in repairs sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm compete all as specified and directed. |
| 74 | S&F600mm X450 mm bevelled edge mirror of selected quality glass mounted on 6 mm thick building board or commercial plywood and fixed to wooden pluge as in repairs. |
| 75 | Demolition of Brickwork or stone / boulders masonry laid drybuilt in cement mortar |
| 76 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. |
| 77 | Demolition of cement concrete (unreinforced) in ground floors and pavings n.exc 15 cm thick above or below ground level. |
| 78 | Demolition cement concrete (unreinforced) in ground floor and paving n exc 15 cm thickness (below or above ground level). |
| 79 | Demolition of cement concrete of any description and in any position not otherewise specifically provided for as in sunken floor, roof incl tarfelt etc complete all as specified and as directed. |
| 80 | Dismantling timber scantling 40 Sqm and over in sections in any position unframed work. |
| 81 | Dismanting Asbestos cement (corrugated, semi corrugated, etc) sheets in roof convenings |
| 82 | Dismantling of Asbestos cement (corrugated, semicorrugated, etc) sheets in roof covering incl ridges complete all as specified and directed. |
| 83 | Dismanting Wall and ceiling boards (fibre,pulp, insulation,insulation etc.) or boards/ slabs/ blankets, any thickness, including cover fillets ) |
| 84 | Dismantling of cast iron drain pipe 100 mmdia from floor/walls etc and taking out oftrenches/floors. |
| 85 | S & F 4mmthick non asbestos fibre cement buildings boards fixed or laid/inserted to timber/GI/aluminium frame work in ceiling with screws including two coats of OBD ove a coat of primer complete all as specified and directed. |
| 86 | M&L for machine kota stone slab flooring 20-25mm thick over cement slurry base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and mirror polishing complete including 15mm thick screed bed in CM 1:6. |
| 87 | M&L for machine cut Kota stone stone slab 10-15mm thick as skirting, dado etc laid & jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing & polishing and treating the surface with Mirror polish including 10mm thick cement plaster in CM 1:4complete all as specified and directed. |
| 88 | Material and labour polished cuddappa stone slab flooring thickness of stone slab varying from 20mm to 30 mm thick laid over 20mm thick cement screed in CM 1:6 and jointed with grey cement slurry mixed with pigment to match the shade the slabcomplete all as specified and directed. |
| 89 | M&L for PCC 1:2:4 type B1 using 20mm graded aggregate as in paddingon roof surface averaging 40mm thick etc complete all as specified and as directed. |
| 90 | M&L for rendering 15mm thick in CM 1:6 on fair faces of brick/concrete finished even and smooth without using extra cement complete all as specified and as directed. |
| 91 | M&L for rendering 5 mm thick on ceiling in CM 1:3finished even and smooth without using extra cement complete all as specified and as directed. |
| 92 | M&L for 15 mm thick rendering on fair faces of brick work or cement concrete surfaces in cement mortar 1:4, finished fair and even without using extra cementincl mixing of water proofing compound complete all as specified. (Note: Water Proofing compound shall be measured and paid for separately) |
| 93 | M&L for 20 mm thick screed bed in cement mortar 1:6 for layingfloor finishes under floor. |
| 94 | M&L for preparation of new plastered or un- plastered surfaces and walls including cornices, pilasters etcand applying two Coats of cement base paint over a coat of primer complete all as specified. |
| 95 | M & L for applying two coats of OBD including priming with alkali resistant primming paint over 3mm thick wall care putty and preparation of new surface complete all as specified and as directed. |
| 96 | M&L of applying three coat of white wash on ceilingon new plastered surfaces etc complete all as directed by Engr-in-charge. |
| 97 | M & L prepration of new plastered surfaces of walls and applyingtwo coats of cementbase paint over one coat of primer all as specified and as directed |
| 98 | M & L for preparing new plastered surfaces and applying 2 coats of OBD over a coat of primer on new surface of walls over 3mm thick wall care putty complete all as specified and directed |
| 99 | S&F CP Bib taps fancy typeChromium platedcast copper alloy with crutch or butterfly handle, screwed for iron pipe of dia 15mm, fancy type fixed in repairs. |
| 100 | S&F 110 mm PVC (SWR) bends any redius with access door. |
| 101 | S&F 75 mm PVC (SWR) bends any redius with access door. |
| 102 | S&F 110 mm PVC (SWR) branch piece, (singal T) equal or unequal with access door. |
| 103 | S&F 75 mm PVC (SWR) branch piece, (double T) equal or unequal with access door. |
| 104 | S&F in repairVitreous china squatting pan, Orissa pattern of size 580 x 440mm, white complete with integral foot rests and PVC low level flushing cistern of 10 Ltr capacity and PVC flush pipe and including provn of lime concrete bedding including CI \"P\" trap 100mm complete all as specified and directed. |
| 105 | S&F in repairs vitreous china wash basin white flat back size 550x400 mm including cutting for and pinning in ends for bracket, fitting with piller tap 15 mm bore, cast copper alloy, with capstan heads, chromium plated,screwed down, high pressure, with or with out letter \"Hot\" or \"Cold\" with long screwed shanks and fly nuts, screwed for iron pipefancy type and waste fittings 32 mm including waste pipe, brass chromium plated with long screwed shanks and fly nuts, flange end bedded in red lead cement and other endfixed complete all as specified and as directed |
| 106 | S&F in repairs brass Choromium plated shower rose with or without swivel joints 125mm size includingfixing to steel pipe or union complete. |
| 107 | Supply and fixing of soap-dish chromium plated (Approximate size 160x160x90mm) all as specified |
| 108 | M&L for (a)applying a coat of 85/25 bitumen based primer over the plastered surfaces @0.30Ltr/Sqm (b) Providing and laying APP based polymeric membrane of 3mm thickness of weight not less than 3.50kg/sqmon primed surfaces by means of torch application with side overlap of 100 mm both longitudinally and transversely(c) Over APP membrane applying a coat of bitumen primer of 85/25 grade @1.20Ltr/Sqm and over thissolar reflective bitumninous aluminium [email protected]/sqmcomplete all asspecified and directed |
| 109 | M&L for chequered cement concrete desiner tile 300 mm x 300 mm x 25 mm thick setjointed andpointed in neat cement slurry in floor with grey cement and pigment and including 20 mm thick screed bed cement mortar 1;6 all as specified and directed. |
| 110 | S&FCPangle valves cast copper alloy,fancy type,with iong shank and cup,bore15mm, fixed in repairs. |
| 111 | Taking down existing unserviceable point wiring of any description/type/ size of light/ fan/tube/power/two way/bell point etc on TW batten/conduit includingremovalof batten / conduit / gutties / wooden boards / switches / sockets / regulators/ light fittings etc and removal of unserviceable material out of site and making good the disturbed surfaces of wall/ceiling so as to match with the existing finishes all as specified. |
| 112 | M & L for Concealed Conduit Point wiring with 1.5 Sq mm copper conductor single core PVC insulated cable FRLS type 1100 V multistranded drawn through conduit and including rigid PVC conduit and conduit accessories of suitable dia medium grade and pressed steel terminal boxes of 1 mm thick MS duly painted with red oxide metal primer including fixing/grouting sunken/ surface as per site requirement covered with 3 mm thick laminated hylam sheet including running up of 1.5 Sq mm copper conductor PVC insulated cable as earth continuity conductor along with wiring and connecting to the common earth dolly for fixing the switches/ sockets/ regulators etc all as specified for:(a) One light point controlled by one, one way switch 5A, SP |
| 113 | (b) One ceiling / exhaust fan point controlled by one, one way switch |
| 114 | (c) One 2/3 pin 5 Amps switch socket outlet point controlled by one switch on the same board. |
| 115 | (d) One 3 Pin 5 Amps switch socket Independt board. |
| 116 | (e) OneBell point controlled by one bell push. |
| 117 | Description all as per item No 3 here-in-before but using 4 Sq mm single core copper conductor cable of multistranded PVC insulated FRLS 1100 Volts grade for 5/15 Amps switch socket combination point including running of 4 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly. |
| 118 | Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete. |
| 119 | Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete. |
| 120 | S & F LED light fitting 1x9W/1X10Wbulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size. |
| 121 | S & F lamp holder insulated body with back plate for angle/batten fittingsfixed with wooden round blocks complete all as specified. |
| 122 | S & F Switch pianotype single pole one way flush type 5 Amps capacity 230 volts. |
| 123 | Supply and fix switch flush type 16 Amps, 230 Volts complete all as specified. |
| 124 | S&F bell ding dong working on 230 volts AC Supply. |
| 125 | Supply and fix socket outlet flush type multipurpose 2/3 pin 5 amps, 230 volts all as specified. |
| 126 | Supply and fix switch socket combination flush type multipurpose 2/3 pin5 Amps, 230 Volts complete all as specified. |
| 127 | Supply and fix switch socket combination flush type multipurpose 5 in 1,5/16 Amps, 230 Volts complete all as specified. |
| 128 | S & F single pole and neutral sheet metal enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp complete all as specified and directed by Engineer in charge |
| 129 | S & F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified. |
| 130 | Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth earth lead 4 mm dia, by means of nuts, bolts,check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe med grade 15mm bore from earth elelctrode to test pointincl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipemed grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of Part-I and connection to earth test point all as specified incl testing on completion. Note :- Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4 mm size and protection pipe of 15 mm bore GI light grade. |
| 131 | S & Fix ceilingfan regulator step type AC 240 voltsuitable for 1200mm sweep. |
| 132 | M & L for Submain wiring with two single core 4 Sq mm PVC insulated cable FRLS type copper conductor multistranded 1100 Volts grade drawn through andincluding rigidPVC conduit and conduit accessories of 25 mm dia medium grade including running up of 4 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly completeincludingremovingtheexistingunserviceablesubmain wiringandmakinggood thedisturbed surfaceto match with the existing all as specified.Note:-two runs of cable, one run of earth contuinity conductor and one run of conduit shall bemeasured and paid as one unit length. |
| 133 | M & L for Submain wiring with two two core 6 Sq mm PVC insulated FRLS copper conductor multistranded 1100 Volts grade drawn through andincluding rigidPVC concealed conduit and conduit accessories of 25 mm dia medium grade including running up of 6 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the commonearth dolly completeincludingremovingtheexistingunserviceablesubmain wiringandmakinggood thedisturbed surfaceto match with the existing all as specified.Note:-Two runs of cable, one run of earth contuinity conductor and one run of conduit shall bemeasured and paid as one unit length. |
| 134 | S & F exhaust fan of metal body 300 mm sweep with metallic louver including connecting up of PVC insulated copper conductor multistranded cable of suitable size as recommended by the manufacturer from ceiling rose to connector complete including provision of HDPE high grade plastic net 800 GSM, hole size one inch , thickness 3 mm green colour on the outside wall all as specified and as directed by Engr-in-charge. |
| 135 | Taking down the existing unserviceable main switch / cut out / DBs of any type / capacity / description as per existing at site including making good the disturbed surfaces to match with the existing finishes all as specified. |
| 136 | Provn of cable TV socket outlet point including conduit 20mm dia upto 15m long to reach out the intake point |
| 137 | S & F down rods of 20mm dia including threads holes for suitable length complete suitable for ceiling fans of size 1200 mm sweep including clamps, nut & bolts as specified and as per site requirement. |
| 138 | M & L for cutting on wall in round shape using machine cutting only and making opening, at any height, fixing of premoulded block of required diameter suitable for mounting 300 mm dia exhaust fan including making good the disturbed surface, plastering, matching with existing colour and clearing all debris from work site all as specified and as directed. Note : The contractor should check the site requirement for proper execution of work. The quoted rate includes for all/any number of openings required at any place for proper ventilation of the site. |
| 139 | Disconnecting and removingceiling fan of 1200/1400 mm sweepany height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine and rewinding of the ceiling fan with equivalent new super enamelled copper wire of existing gauge and weight as per manufacturer\"s design and instructions including varnishing for ceiling fan complete including replacement of worn out/defective parts such as capacitor, sealed ball bearing, rubber bushes , split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling and refixing in original position with provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of ceiling fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testing complete all as specified. |
| 140 | S & F Security Lights of 1x15 watt LED light with high power LED and unique peanut lens to ensure uniform distribution and including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and directed by Engg-in-Charge. |
| 141 | S & F Security Lights of 1x25 watt LED light with high power LED and unique peanut lens to ensure uniform distribution and including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box complete all as specified and directed by Engg-in-Charge. |
| 142 | M & L bracket made out of GI pipe of suitable dia not less than 1.2 mtr long and fixed on walls with 2 nos MS clamps made out of MS flat of suitable size thick complete with MS nuts, bolts and washers etc bent to required shape complete all as specified and directed by Engg-in-Charge |
| 143 | S & F Vertical loadline type TPN DB 4 way double door with fixed magnetic setting for bus bar current rating of 160 Amps 16 KA (MCCB 100 A TP volts AC 3 phase50 Hz ) confirming to IS specification made out of CRCA sheet housing duly powder coated & confirming to IS specification complete all as directed by Engr-in-Charge. |
| 144 | S and F sheet metal enclosure MCBDB SPN 8 way with 200 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified. |
| 145 | S and F sheet metal enclosure MCBDB SPN 8 way with 100 Amps rated bus bar 240 Volts double door with magnetic locking system complete all as specified. |
| 146 | S & F MCB SP230V suitable for fixing on MCB DB of capacity 6 to 32 Amps complete all as specifiedand directed by Engg in Charge |
| 147 | S & F MCB SPN 40-63 Amps 240 volts for fixing on MCB DB\"sall as specified |
| 148 | S & F MCB SPN230Vsuitable for fixing on MCB DB of capacity 63 Amps complete all as specified and directed by Engg in Charge |
| 149 | S & F wall mounted box type LED of 18/22 watt with LED Lamp,with 2 Nos round blocks with necessary fixing arrangements and connecting to the point wiring with necessary flexible copper conductor multistranded three core of suitable length & size from fitting to the ceiling rose complete and as directed by Engr-in-Charge. |
| 150 | S & F 9 Watt LED Bulb with lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings. |
AI Tender Summary
Tender Timeline
Jan 05, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Jan 05, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
Completed
Jan 12, 2023
18:00 IST
Corrigendum-2 Issued
Clarifications on tender conditions and amendments issued.
CompletedJan 12, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 14, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender