Military Engineer Services-MES has published Tender For Special Repairs To 4(T) Mess Of Mtti And Provn Of Roof Shed For Kerosene Kerbside Pump For Sls At 23 Ed, Shot Blasting Machine At Painting Bay At 8 Brd And Improvement Of Toilet Near T/34 At Af Stn Avadi Under Ge Avadi. Submission Date for this Tender is 14-01-2023. Blasting Machine Tenders in avadi Tamil Nadu. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 07-Jan-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 14-01-2023 |
| Sl. No. | Item Description |
| 1 | Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles tostore and rubbish off the premises all as directed. |
| 2 | M&L for Non Skidceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.11 but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchlaid over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 3 | M&L for Non Skidceramic coloured tiles 7 to 8mm thick (square/rectangular) area of each tile exceeding 0.18 but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to matchlaid over 15mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 4 | M&L for coloredglazed ceramictiles area of tile 350 x 250 mm/450 x 350 mm and 7mm thick on vertical surfaces such as skirting, dado, walls etc set and jointedin neat cement slurry and pointed in whiteor coloredcementto match the tile colours including 10 mm thickbacking coat in cement mortar1:4 complete all as specified and directed |
| 5 | Demolition of stone slabs and tiles of any description or thickness in floors, aprons laid dry or laid dry and pointed completed all as specified and directed. |
| 6 | M&L for Machine cut Kota stone slab flooring 20-25 mm thich laid over 20 mm thick cement screed bed in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polioshing complete all as specified and directed |
| 7 | M&L for Granite (of any type) tiles 20mm thick machine cut, bedded over 20mm thick cement mortar 1:6 and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete all as specified and directed |
| 8 | Taking down cement or cement lime plaster of any descriptionon brickor stone walls/ceiling includingrackingout joints hackingfor key, scrubbingdown withwater etc completed all as directed |
| 9 | M&L for 5 mm thick ceiling plaster in CM 1:3 on fair faces of concrete surfaces finished even and fair complete all as specifed and directed |
| 10 | M&L for three coats of colour washing including preparation of newly plastered surfaces of ceiling complete all as specifed and directed |
| 11 | M&L for 10 mm thick rendering in CM 1:6on othe than fair faces of Brick work or concrete wall surfaces finished even and smooth without using extra cement all as specified and as directed. |
| 12 | M&L for 5 mm thick cement plaster in CM 1:4 with WPC over 10 mm thick plaster in CM 1:6 on fair faces of brick or concrete wall surfaces, finished even and smooth without using extra cement complete all as specified and direcrted. Note: water proofing compound paid and measured separately. |
| 13 | Taking down chowkats or frames not exc 1.5 Sqm each with shutters (without taking off shutters from the frames), complete all as specified and directed. |
| 14 | All as per item No 13 above but refixing in the same opening |
| 15 | S&F Pressed steel frames of size165 x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete, as specified and directed |
| 16 | S&F factory made2nd class hard wood fitted to chowkats 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edge of framing plain, chamfered or rounded, fitted with cut and mitred beds for securing glass, etc.; sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a); supplied and fitted to chowkats complete all as specified and directed |
| 17 | S & F 2nd class Hard wood factory made 35mm thick Plain framed, panelled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated etc complete all as specified and directed |
| 18 | S&F 100 mm long Butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified |
| 19 | S&F 200mm long aluminium, anodised, barrel tower bolts of extruded section and fixed with SS screws etc complete all as directed |
| 20 | S&F 150mm long double action spring hinges, mild steel with steel wire spring, stove enamelled, black fixed with SS screws etc complete all as directed |
| 21 | S&F 150mm long extruded aluminium alloy handles, fabricated type anodised fixed with SS screws etc complete all as directed |
| 22 | S&F 2nd class hard wood small fittings such as brackets of any type, latch and hinge blocks, shaped door and window stops and the like including all necessary labours; articles n exc 200 cu. cm each fixed with SS screws etc complete all as directed |
| 23 | S&F MS Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook and pintle hinges; largehasps and staples; chains; hand made sliding bolts; clamps; hold fasts; will ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe410-0 or Fe 310-0 complete all as directed |
| 24 | M&L for PCC 1:3:6 type C1 using 20mm graded stone aggregate as in bed plates for holdfast etc including necessary formwork all as specified and as directed. |
| 25 | S&F 300 mm long Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed with SS screws all as specified and directed |
| 26 | S&F powder coated aluminium frame for doors, windows, ventilators, partition with one or more rebates including joining cleat for fixing etc., complete all as specified and directed |
| 27 | S&F powder coated aluminium door shutters, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminium snap beading, screws etc. complete all as specified and directed |
| 28 | S&F powder coated aluminium sliding window and ventilator shutters,without sash bar, aluminium section weighing 0.55kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and directed |
| 29 | S&F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction. |
| 30 | S&F in repairs Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples etc complete all as specified and directed |
| 31 | S&FStainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staplesetc complete all as specified and directed |
| 32 | S&F brass rebated Mortice Lock vertical type of size 100mm four Lever complete all as specified and as directed |
| 33 | S&F Aluminium (Die cast) body door closer hydraulically regulated desination No 3, universal type suitable for door shutters of 851 to 1000mm in width and of weight between 61 to 80Kgand fixed with brass screws etc complete all as directed |
| 34 | S&F 150mm longfloor door stopper Aluminium alloy body and tongue,anodised,with hard drawn steel spring fixed in floor complete all as directed |
| 35 | S&F 9 mm thick prelaminated particle board exterior grade prelaminated one side with decorative choice lamination ans other side balancing white lamination fixed with screws to timber frame work etc complete all as specified and directed |
| 36 | S&F 5 mm thick sheet glass ordinary quality and glazing with oil putty/ glazing clips in square/rectangle exc 0.5 sqm each pane all as specified and directed |
| 37 | S&F 4.0 mm thick sheet glass ordinary quality and glazing with oil putty/glazing clip in square/rectangle n exc 0.5 sqm each paneall as specified and directed |
| 38 | M&L for Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings all as directed |
| 39 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed wih self tapping screws as specified and directed |
| 40 | M&L for Demolition of brick work or stone /boulder masonery built in cement mortar or cement lime mortar including all quions, arches, pillars etc but excluding ashlar facing all as specified and directed. |
| 41 | M&L for Brickwork with fly ash old size bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 all as specifed and directed |
| 42 | M&L for prepration of new plastered wall surface and applyingtwo coats of oil bound distemper over a coat of primer on 3 mm thick wall care Putty complete all as specified and directed |
| 43 | M&L for prepration of newly plastered wall surface and applying two coats of exterior weather coat over a coat of Primer on 3 mm thick wall care putty complete all as specified and directed |
| 44 | S&F rolled mild steel sections as in main and cross beams, hip and jack rafters; purlins where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates of Fe-410-W(Gde-E-250) quality A complete all as specified and directed |
| 45 | Supply only integral Water proofing compound. |
| 46 | M&L for Dismantling wrought iron work or mild steel of any description not otherwise provided complete all as specified all as directed. |
| 47 | S&F Framed work such as grills,gratings, etc with ends of bars shouldered and/ or riveted, or forged into spikes; framed guard barsand similar work conforming to Fe.290. Gde-E-165 |
| 48 | Dismantling of partialy Reinforced cement concrete of any description and in any position not otherwise specifically provided for complete all as directed |
| 49 | S&F Gl wire netting 0.90mm dia and 12mm mesh lathing to wood or metal studding, joists, etc. in walls. Ceilings, stanchions, beams, etc. including all laps, cutting and waste etc complete all as specified and directed |
| 50 | M&L for RCC 1:2:4, type B0 using 12.5mm graded stone aggregate in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, water troughs and the like including weathering, slightly rounded for chamfered angles and throating, including form work all as specified and as directed |
| 51 | M&L for milid steel TMT bars 6mm dia to 8mm , cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) or securing with clips etc complete all as specified and directed |
| 52 | M&L for taking up or down existing steel tubing 15 mm bore and connections complete all as specified and directed. |
| 53 | All as item No 52 above but for 20mm bore |
| 54 | S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floor all as specified and directed |
| 55 | S&F 75 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints laid in trenches or in floors all as specified and directed |
| 56 | M&L for laying 20mm CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors (spout) complete all as specified. |
| 57 | S&F in repairs 15 mm dia angleStop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed |
| 58 | S&F20 mm dia Stop valves, cast copper alloy screwed pressure, with crutch of butterfly handle, screwed both ends for iron pipe for unions and fixed complete all as specified and directed |
| 59 | S&F in repairs vitreous china squatting pan "Orissa" pattern size 580mmx440mm white with integral foot rests including including provision of lime/cement concrete all as specified and directed |
| 60 | S&F in repairs 10 ltrs capacity PVC valveless, syphonic action typelow level flushing cistern white ISI marked with inlet ball valve, float valve and handle including Flush pipe of polyethylene of low or high density or PVC. 32 mm dia complete all as specified and as directed. |
| 61 | S&F Vitreous China urinals, half stall type with PVC waste/ flush pipes, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and Union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) all as specified and directed |
| 62 | S&F in repair 15mm bore pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered "hot" or "cold" with long screwed shanks and flynuts, screwed for iron pipe and fixed complete all as specified and directed |
| 63 | S&F in repairs chromium plated shower roses 125mm dia with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed |
| 64 | S & F in repairs vitreous china wash basin white flat back of size 550 x 400mm including brackets,cutting for and pinning in ends of brackets for erecting stand including 32 mm dia PVC waste pipeetc complete all as specified and directed |
| 65 | S&F PVC connections 15mm size with PTMT nuts of length 300mm all as specified. |
| 66 | M&L for PVC (SWR) floor trap with 75mm dia outlet, plain with grating including jointing with solvent cement etc complete all as specofoed and directed |
| 67 | S&F 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers etc complete all as specified and directed |
| 68 | M&L for RCC 1:2:4 type B1 using 20 mm graded bore aggregate as in slabs supported on walls,beams and columns in floors, roofs, landings, balconies, canopies, deck slabs in shelves and like etc all as specified and directed |
| 69 | M&L for Demolition of cement concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as directed |
| 70 | M&L for 75 mm thick PCC 1:3:6 type C1 using 20 mm graded stone aggregate as in plinth protection complete all as specified and directed |
| 71 | M&L for 75 mm thick PCC 1:4:8 Type D2 using 40 mm graded stone aggregate as in Sub base all as specified and directed |
| 72 | M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry with gray cement and no pigments as in floors including 15mm thick screed bed in cement mortor 1:6 etc complete all as specified and directed |
| 73 | M&L for preparation of old decorated wall surfaces by complete removal of existing treatment and applying two coats of color wash over a coat of white washall as specified and as directed. |
| 74 | M&L for preparation of old decorated wall surfaces by complete removal of existing treatment and treating with two coats of oil bound distemper over a coat of primer & 3 mm thick wall care putty all as specified and directed |
| 75 | M&L for preparation of new wooden surfaces of any description, not otherwise described over 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primeretc complete all as specified and directed |
| 76 | M&L for preparing old steel surfaces of any description, over 10cm width or girth or otherwise described and applying two coats of synthetic enamel paints etc complete all as specified and directed |
| 77 | S&F in repair curtain rods of Harrison rails, of anodised aluminium with fixing brackets, stops, rollers etc.complete all as specified and directed |
| 78 | Cutting holes into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 Type B-1 as required superficial area exc 150 sq. cm but n exc 400 sq. cm all as directed |
| 79 | M&L forPCC 1:3:6 type C-0 using 12.50 mm graded stone aggregate as in coping/bed plates, steel door frame etcall as specified and as directed. |
| 80 | S&F Expanded metal, cut to length, bent to shape required and tying with and including annealed mild steel wire not less than 0.9mm dia or fixing with galvanised steel staples supplied and fixed complete to wood or steel members weight n exc 4 kg per Sqm etc complete all as specified and directed |
| 81 | S&F 125 mm long cold rolled mild steel Butt hinges of medium weight fixed to steel frames with SS screws all as specified and directed |
| 82 | M&L for preparation of newly plastered ceiling surfaces and applying three coats of white wash all as specified and directed |
| 83 | M&L for Disconnecting existing tanks, setting aside (or lowering if required) for repairs, cleaning, etc. and hoisting if required reconnecting and re-fixing in position. (Cleaning repairing, etc. measured separately) for tank capacity exc 500 and n.exc 1000 ltr etc complete all as directed |
| 84 | M&L for Cleaning and removing all scale and dirt, etc, from tanks of capacitynot exc. 1000lts ltrs and dirts from mouths of circulating pipes, etc. all as directed |
| 85 | M & L for TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips and completed all as specified and directed. |
| 86 | M & L for pre cast man hole cover slab in RCC 1:2:4, type B1, using 20mm graded stone aggregate, set in cement mortar 1:6 including necessary form work complete all as specified. Note : Reinforcement steel will be measured and paid separately. |
| 87 | S& F CPVC fittings Brass elbow 20mm dia all as specified and as directed. |
| 88 | S& F CPVC fitting Brass T 20mm dia all as specified and as directed. |
| 89 | S&F in repairs 15 mm dia Bib taps,chromium plated cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed |
| 90 | Cleaning of wall tiles using acid and making good joints using white cement all as directed. |
| 91 | M&L for preparation of old decorated wall surfaces by complete removal of existing treatment and applying two coats of exterior weather coat with a coat of primer applied over 3 mm thick wall care putty all as specified and directed |
| 92 | Surface excavation not exc 30 cm deep and averaging 15 cm deep and getting out in hard/ dence soil all as specified and directed. |
| 93 | Excavation in post holes or (Similar holes) each n.exc 0.5cum, getting out, returning filling in and ramming earth or broken rubber mixed with earth around in layers, n.exc 25 CM watering and removing surplus soil to a distance n.exc 50m and making good surfaces in hard/ dense soil all as specified and as directed. |
| 94 | M&L for PCC 1:3:6 type C2 using 40mm graded Stone aggregate as in foundation of post holes filling and mass concrete all as specified and directed. |
| 95 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 complete all as specified and directed. |
| 96 | M&L for two coat of synthetic enamel paint over a coat of red oxide primer on newly prepared steel surfaces over 10cm in width or girth not otherwise described. |
| 97 | M&L for 100 mm thick PCC 1:4:8 type D2 using 40 mm graded stone aggregate as in subbase all as specified and asdirected. |
| 98 | M&Lfor 100 mm thick PCC 1:2:4 type B1 using 20mm graded stone aggregate as in floor finished even and fair complete all as specified and as directed. |
| 99 | S&F 38 mm wide glass dividing strips, 3 mm thick inserted in position conform to design complete all as specified and directed. |
| 100 | Taking down chowkats or frames exc 1.5 Sqm and not exc. 4 Sqm each with shutters (without taking off shutters from the frames),complete all as specified and directed. |
| 101 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm thick plain colour PVC sheet reinforced with 19mm MS square tube of 19 gauge mitre cut at two corners and joined by inserting two Nos of 150mm long brackets of 15mmx15mm MS squaretube inside the 19mm MS square tube and suitably screwed complete all as specified and as directed. |
| 102 | Supply & fixing factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for style and plain colour PVC sheets for top rail & bottom rail Paneling plain colour PVC sheet to be fitted in MS frame welded/sealed to the stile & rails with suitable PVC sheet beading as per specification & shown on drawing in SSRPt II of 2010 incl pvc hinges100 mm size – 3 Nos for each shutter complete all as specified. |
| 103 | S&F in repair Vitreous China wash down water closet pan (pedestal pattern) white(excluding flushing cistern and flush pipe) including connection to drain or out going pipe and flush pipe anti symphonize pipe etc complete all as specified and as directed. |
| 104 | S&F Bib tap, cast copper alloy Chromium plated,fancy type, screwed down high pressure with crutch or butterfly handle for 15mm bore. |
| 105 | S&F GI tube 15mm bore medium grade including all fittings fixed to walls all as specified. |
| 106 | S&F PVC connection consisting of PVC ferrule, at both end bore of funnel15 mm, length 450 mm all as specified. |
| 107 | Taking down carefully unserviceable point wiring copper / aluminium (light, fan, socket or power) complete, including removal of batten / conduit / gutties / wooden board etc., including fittings and fixtures such as switches, ceiling roses, regulators, sockets, light fittings, fans etc.,removal from site under Sch of credit and removal of unserviceable items out of site and making good the disturbed surfaces of walls, ceilings etc.,complete all as specified and as directed. |
| 108 | Point wiring on stone / brick masonry wall complete with two 1.5 sqmm single core PVC insulatedFRLSH ,1100 volts grade unsheathed cable confirming to IS-694, 1977 with multistranded copper conductor, drawn through and including non-metalic rigid PVC conduit, conduit fittings and conduit accessories not less than 20 mm dia concealed in walls and fixed with suitable clamps on ceiling / roof trusses etc., and including provision ofone 1.5 sqmm PVC insulated single core multistranded copper conductor FRLSH green in colour as earth continuity conductor and connected to common earth dolly,including steelbox of required module for modular switches/sockets and regulators all as specified completefor:- Note: Cost of terminal box and cutting chases for concealing pipes is deemed to be included in the item rates quoted for point wiring. |
| 109 | one light point controlled by one switch. |
| 110 | One Exhaust fan point controlled by one switch. |
| 111 | One ceiling fan point controlled by one switch and regulator |
| 112 | One wall mounted fan point controlled by one switch |
| 113 | One switch socket outlet 3 pin 5 Amps on same board along with other switches |
| 114 | One switch socket outlet 3 pin 5 Amps on independent board. |
| 115 | All as per item No 108 here-in-before but for point wiring with two 4.0 sqmm single core copper conductor multistranded FRLSH cable and one 4.0 sqmm PVC insulatedsingle coremultistranded cable as earth continuity conductor green in colour for one 3 pin switch socket outlet, 15 Amps, on independent board and industrial socket complete all as specified and as directed. (15A Socket-20 + Industrial Socket-04) |
| 116 | S&F Switch piano flush type, single pole,5 Amps, 240 volts complete all specified. |
| 117 | S&F Switch socket 3 pin 5 amps , multi pin , flush type,complete all specified. |
| 118 | S&F Switch socket 3 pin 15 Amps, multipurpose, flush type complete all specified. |
| 119 | S&F ceiling rose 65 X 50 mm , three terminals ,bakelite , surface complete all specified. |
| 120 | S&F electronic fan regulator, flush type phenolic laminated sheet etc; as required. |
| 121 | Supply and fixing 240V, 10 KA "B" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified. |
| 122 | Supply and fixing 240V, 10 KA "B" curve miniature circuit breaker (MCB) of single poles and current carrying capacity 40 AMP, in the MCB DBComplete with connection testing and commissioning complete all as specified. |
| 123 | Supply and fixing 240V, 10 KA "B" curve miniature circuit breaker (MCB) of SPN and current carrying capacity 40-63 AMP, in the MCB DBcomplete with connection testing and commissioning complete all as specified. |
| 124 | Supply and Fixing of Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps complete all as specified. |
| 125 | Surface and wall mounted LED tube light fitting, 20 W, batten type, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser andintegrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply, and including connecting up with PVC sheathed 1.0sqmm 3 core copper conductor flexible wire from ceiling rose to fitting with the following parameters,complete all as specified and as directed. Make:- C&S (LTTB4F20WLED/W) /Crompton :- CCS-103-20-65-SL-DP-NWH / Havells :-LUMILINEPLUSSBS20WLED865SPCSS |
| 126 | Supply and fixSurface and wall mounted LED double tube fixture, 2 x 22 Watts, universal batten for T5 and T8 lamps, including all accessories includingUltra bright glass LED Tubelight 20W, with very high efficancy suited for installation inT8/T5 fitting with G13 lamp holders complete all as specified andsuitable to operate on AC 230V, 50 Hz supply,pre wired including connecting up with PVC sheathed 1.0 sqmm 3 core copper conductor flexible wire complete all as specified and as directed. Make : Havells:- Cat No:- REGALBATTENT8UPTO2X22WSSBSWH/CRYSTAL 1213T8DSTL18WLED865SGLASS / Bajaj,Cat No:-BLRB-DB 218/BLRB 18W CW LED/ Crompton : Cat no :- IGP162LT8-16/LT8-20-865-(2) |
| 127 | Supply and fixing Surface and wall mounted mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser andintegrated electronic driver complete with all accessories , suitable for operation on AC, single phase 220 / 230 Volts , 50 Hz supply, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting complete all as specified and as directed. |
| 128 | Supply and fix Decorative ECO bulkhead luminaire capacity 10/12W, environmental friendly ultra modern energy saving surface mounted, LED luminaire comprising of high brightness and including connecting up with twin core twisted flexible copper conductor cable with suitable size of 230V, 50 HZ includint taking down fitting complete all as specified. Make :- Luker :-Eco Bulkhead (LBKOVSL12) /Crompton :- LBHP-10-CDL / Surya:-SLE BH 10W |
| 129 | S&FLED energy saving industrial type tube light fitting for capacity 40watt,6000k,IP65 withhigh efficancy integrated electronic driver ,dust and water proof corrosion and impact resistant batten with polycarbonate housing complete including connection from ceiling rose to light fitting with suitable size of connection cable including taking down the old unserviceable fitting complete all specified and directed by the Engineer-in-Charge. Make :-Jaguar ( LPRDO1X040C) /Havells :- MAGNUMGRANDNEOIP6640WLED865SPC /Crompton :- CIS-300-40-57-SL-DP-NGR |
| 130 | Supply and fix LED building security street light 25W, made up of pressure die cast housing with toughed glass and individual high power LEDs with secondary optics, IP66 protection and impact resistance of IK07 incuding drivers, connecter block etc complete pre wired & connecting up with suitable twin core flexble copper wire and suitable bracket all as per dirtected including taking down old light complete all as specified. Make :-C&S ( INDUS-i/25W) / Bajaj :- BCLST 25W LED I V2 /Crompton:- LSTS-25-CDL-M |
| 131 | Supply and fix Flood light luminaries LED energy saving 50 Watt, LED exlusive innovative designed, long life versatile pressure die-cast aluminium IP 65 flood light with high pressure die cast aluminium housing and impact resistant polycarbonate lens complete with all accessories and glass cover with suitable bracket or with grouted spring pressure fasterner/steel rawal plugs as directed by Engineer in Charge including connection from juction box to lilght fittings with 1.5 Sqmm 2 single core PVC insulated and unsheathed, multi stranded FRLS copper conductor cable drawn in flexible conduit including taking down the old unserviceable fitting complete all specified and directed by the Engineer-in-Charge. Make :-Jaguar ( LFLD04S050XC) /Havells :- JETA QUANTOPLUSFLP50WLED757SYMLENS /Crompton :-CFS-50-57-60D-SL-GL-NSG |
| 132 | Taking down carefully Power / Sub main wirings with PVC aluminum conductor cables in PVC/STEEL conduits / TW battens up to 2 runs of 6 Sq.mm removing materials from site, taken ascredit ,making good thedisturbed surfaces all as specifiedand as directed. |
| 133 | Power / Sub-main wiring with PVC insulated unsheathed, FRLSH ,1100 volts, grade multistranded copper conductor, two runs of single core 6 sqmmconforming to IS-694, drawn through and includingsuitable dia rigid PVCconduit, conduit fittings and conduit accessories alongwith one run 6 sqmm PVC insulated single core multistrandedcopper conductorcable (green) asearth continuity conductor concealed in walls and fixed with suitable clamps on ceiling / roof trusses etc. and connecting tocommon earth dolly complete all as specified and as directed. |
| 134 | S & F Power / Sub-main wiring with PVC insulated unsheathed, FRLSH ,1100 volts, grade multistranded copper conductor, four runs of single core 10 sqmmconforming to IS-694, drawn through and includingsuitable dia rigid PVCconduit, conduit fittings and conduit accessories alongwith two run 10 sqmm PVC insulated single core multistrandedcopper conductorcable (green) asearth continuity conductor concealed in walls and fixed with suitable clamps on ceiling / roof trusses etc. and connecting tocommon earth dolly complete all as specified and as directed. |
| 135 | S&F MCB DB SPN 8 way, doubledoor, powder coated, 240 volts, AC, 50Hz, IP 43 protected, with provision for MCBdouble pole as incomer andSP MCBs as outgoing with tinned copper bus bar, neutral link, earth linkand connecting up complete all as specified and as directed. Note : Incomingand Outgoing MCB measured separately relevent items. |
| 136 | S&F MCB DB SPN 4 way, doubledoor, powder coated, 240 volts, AC, 50Hz, IP 43 protected, with provision for MCBdouble pole as incomer andSP MCBs as outgoing with tinned copper bus bar, neutral link, earth linkand connecting up complete all as specified and as directed. Note : Incomingand Outgoing MCB measured separately relevent items. |
| 137 | S&F Load line MCB DB TP&N 4 way, vertical, doubledoor, powder coated, 415 volts, AC, 50Hz, IP 54 protected, fixed on wall semi flush with provision for FP MCCB 100 Amps as incomer and SP MCBs 40 / 63 Amps as outgoing with tinned copper bus bar, neutral link, earth linkand connecting up complete all as specified and as directed. Note : Incoming MCCB and Outgoing MCB measured separately relevent items. |
| 138 | S&F MCCBs100 Amps 415V,16KA, 4 Pole complete all as specified . |
| 139 | Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) all as specified and as directed. |
| 140 | Exhaustfan, heavy duty, 450mm sweep, 1370 RPM, with louvers, metal body conforming to IS-2312-1967, AC singlephase, 240 Volts, 50 Hzand connecting including provision of two way PVC connectors, 1 sqmm flexible three core multistranded copperconductorcablefromceilingroseor connectorto fan including earthing and fixing arrangements like louvers and accessories and writing MES No.20mm height with synthetic enamel paint black complete all as specified and as directed. |
| 141 | Exhaustfan, heavy duty, 300mm sweep, 1370 RPM, with louvers, metal body conforming to IS-2312-1967, AC singlephase, 240 Volts, 50 Hzand connecting including provision of two way PVC connectors, 1 sqmm flexible three core multistranded copperconductorcablefromceilingroseor connectorto fan including earthing and fixing arrangements like louvers and accessories and writing MES No.20mm height with synthetic enamel paint black complete all as specified and as directed. |
| 142 | Taking down unserviceable ceiling fan(1200mm/1400mm) from site (Serviceing of ceiling fan) and re-fixing in position duly rectifying the defects (replacing of ball and bearing, oiling / greasing,etc.) and make it serviceable in all respect including painting and marking MES No complete all as specified and as directed. |
| 143 | Taking down unserviceable ceiling fan (1200mm /1400mm) from site (Complete winding of ceiling fan) and re-fixing in position duly rectifying the defects (replacing of ball and bearing, oiling / greasing,winding etc.) and make it serviceable in all respect including painting and marking MES No complete all as specified and as directed.. |
| 144 | Taking down unserviceableExhaust fan450mmfrom site and re-fixing in position duly rectifying the defects (replacing of ball and bearing, oiling / greasing,winding etc.) and make it serviceable in all respect including painting and marking MES No complete all as specified and as directed. |
| 145 | Taking down unserviceableExhaust fan450mmfrom site (Serviceing of exhaust fan)and re-fixing in position duly rectifying the defects (replacing of ball and bearing, oiling / greasing,etc.) and make it serviceable in all respect including painting and marking MES No complete all as specified and as directed. |
| 146 | Supply and fixed on wall or steel trusses for cable XLPE Insulated screenedPVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 sq mm 4 core including fixing materials like lugs,cable glands etc complete all as specified and directed. |
| 147 | Material and labour for earth continuity conductor or main earthing lead fixed to valve on batten or recess or chases or burried in ground or drawing in conduit or any other situation for loop earthing etc as reqd 4 mm dia galvanized steel wire all as specified and directed. |
| 148 | Earthing complete with galvanised iron earth plate electrode 600mm X600mm X 6mm thick, with and including earthing of 4mm dia GI wire protected by 15mm dia GI pipe light grade upto a length of 7.5m. The plate shall be buried directlyin ground vertically to a depth not lessthan2.25 metres below ground level with top edge of the earth plateat a depth not less than1.5 metres belowgroundlevel, connectedto earth leadasdescribedhere-in-beforebymeansofbolts,nuts, washers and checknuts made out ofgalvanised iron or mild steel, earthingleadprotectedby asdescribedhere-in-beforeand connected to main switch board or main control board or electric poleall asshownonelectricalplate No.3of MES Sch Part-Iincluding necessaryearth work and excavation in any type ofsoil,plain cementconcrete1:3:6,typeC1 chamber,reinforcedcement concretecover slab with locking arrangement and handle of 10mm dia MS round bars 450mm long, 1:2:4 type B1, 50mm thick with 8mm diaTMT barsat140mmcentreto centrebothways, GI pipe of bore 20mm medium grade for watering with funnel, wiremesh, salt, charcoal, lugsincluding testing complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
