Tender For Repairs Maintenance Of Misc Furniture Issued To Married Accn Under Bso Of Ge Bengdubi Mil Stn
Tender Value
45 Lakhs
Estimated cost
Bid Submission
11 Jan 2023
0 days left
EMD
90000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
bengdubi → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repairs Maintenance Of Misc Furniture Issued To Married Accn Under Bso Of Ge Bengdubi Mil Stn
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 04-Jan-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 11-Jan-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | ALMIRAH LARGE/MEDIUM /SMALL STEEL(Drg Nos -FD-67(M) / 104 (M)339/340 350/351/1031/ 1033,FD-114(M), FD-243, FD-1032, FD-1034)S&F in repairs legs ofAlmirah Large Steel and providing newby welding made out of 1mm MS Sheetinto required shape for Almirah large, rest complete all as specified, directed and shown on drawing. |
| 2 | S&F in repairs legs ofAlmirah Medium/Small steel and providing newby welding made out of 1mm MS Sheetinto required shape for almirah medium/small steel, rest complete all as specified, directed and shown on drawing. |
| 3 | S & F in repairs replacement of brass 6 lever locks iron body with duplicate keys chromium plated to Almirah Large/Medium/Small steel , rest complete all as specified, directed and shown on drawing. |
| 4 | S&F in repairs handle Chromium plated of size 150 mm grip length with both sides screwed toAlmirah Large/Medium/Small steel, rest complete all as specified, directed and shown on drawing. |
| 5 | Repairs to door of Almirah Large/Medium/Small steel as specified including replacement of hinges rest complete all as specified, directed and shown on drawing. |
| 6 | Repair to existing shelf including welding if required rest complete all as specified, directed and shown on drawing. |
| 7 | Removal of existing worn out paint from inside & outside including preparation of surface complete of the Almirah large steel and M&L for applying two coats of 1st quality synthetic enamel paint of approved colour and make over a coat of red oxide primer complete all as specified, directed and shown on drawing. |
| 8 | All as peritem Sl no 1.06 here-in-before but Almirah Medium/small steel. |
| 9 | BED HARD/BED PLY TOP ( Drg No-FD/E6/MAP/08(R), FD-246 or similar)S&F 12mm thick plywood BWR Grade, approved quality in single piece as per drawing without any joint to the bed frame with suitablenut bolt/screws including removal of damaged ply wood complete all as specified, directed and shown on drawing. |
| 10 | S&F in repairs to 1st qualityteak wood long rail 35mm x 90mm in section as per existing size of Bedincluding removal of damaged long rail complete all as specified, directed and shown on drawing. Note:-Each long rail will be measured as single unit. |
| 11 | All as per item No. 2.01,but short rail size 60mmx60mm complete all as specified, directed and shown on drawing. Note:-Each short rail will be measured as single unit. |
| 12 | S&F in reapirs to new 1st quality teak wood stiffeners of size 40 x 60mm complete including removal of damaged stiffiners complete all as specified, directed and shown on drawing. |
| 13 | S&F in reapirs 4mm thick one side teak finished plywoodof size 780 x 340mm including 12mm dia half cut teak wood beading of both side of head board including removal of damaged ply complete all as specified, directed and shown on drawing. |
| 14 | S&F in reapirs 4mm thick one side teak finished plywood of size 780 x 180mm including 12mm dia half cut teak wood beading of both side of foot board including removal of damaged ply complete all as specified, directed and shown on drawing. |
| 15 | S&F in replacement hard rubber shoes at the bottom of leg of Bed hard steel complete all as specified, directed and shown on drawing. |
| 16 | M&L for Welding to broken joints of bed hard complete all as specified, directed and shown on drawing. |
| 17 | Removal of existing worn out paint including preparation of surface complete of the bed hard steel and M&L for applying two coats of 1st quality synthetic enamel paint of black colour over a coat of red oxide primer rest complete all as specified, directed and shown on drawing. |
| 18 | CHAIR VERANDAH/CHAIR VERANDAH PVC ( Drg No-FD-256,FD-333, FD-359 & FD/MAP-II/06 or similar)Repair/replacement of broken Leg, each one piece made of MS conduit pipe 16G, 19/20mm dia including weldingrest complete all as specified, directed and shown on drawing. |
| 19 | M&L for Welding joints of broken leg of 19/20mm MS tube & other jointscomplete all as specified, directed and shown on drawing. |
| 20 | M&L for Hard PVC/Nylon shoes complete all as specified, directed and shown on drawing. |
| 21 | Removal of existing worn out paint and Re-Painting to the entire frame of chair verandah with white colour synthetic enamel paint over a coat of primer of approve make including removing old unserviceable cane/plastic newar from seat & backand recaning the seat & back of complete chair including handles etc with approved 4mm white plastic caneas per Matt Pattern complete all as specified, directed and shown on drawing. |
| 22 | Removal of existing worn out paint and Re-Painting to the entire frame of chair verandah with white colour synthetic enamel paint over a coat of primer of approve make including removing old unserviceable PVC seat and fixing new PVC seat4mm thick wt. of seat & back not less than 1.85 kg.) of approved make complete all as specified, directed and shown on drawing. |
| 23 | Removal of existing worn out paint and Re-Painting to the entire frame of chair verandah with white colour synthetic enamel paint over a coat of primer of approve make including removing old unserviceable PVC backand fixing new PVC back 4mm thick (wt. of seat & back not less than 1.85 kg.) ofapproved make complete all specified on drawing or as directed by Engineer-in-charge. |
| 24 | CHARPOY G I PIPE PLY TOP/CHARPOY WITH PLYWOOD TOP :( Drg No-FD-220/MAP or similar) S&F in repairs 12mm thick plywood BWR Grade,single piece ofapproved quality with suitable steel screw and cup washer including removal of damaged plywood, rest complete all as specified, directed and shown on drawing. |
| 25 | S&Fin repairs GI Elbow 32 mm dia three way medium grade of approved make suitable for fixing the long rail/short rail/legs rest complete all as specified, directed and shown on drawing. |
| 26 | M&L for Welding to broken joints of Charpoy complete all as specified, directed and shown on drawing. |
| 27 | S&F in replacement hard rubber shoes at the bottom of Charpoy with hard top complete all as specified, directed and shown on drawing. |
| 28 | Removal of existing worn out paint including preparation of surface complete of the charpoy hard steel and M&L for applying two coats of 1st quality synthetic enamel paint of black colour and make, over a coat of red oxide primer, rest complete all as specified, directed and shown on drawing. |
| 29 | CHAIR DINING/CHAIR DINING PVC SEAT (440MMx430MMx890MM) ( Drg No-FD-228/FD-279/FD/MAP-II/05 or similar) Removing the existing unserviceable rear leg and S&F new Teak wood rear leg of size 30x55x890 mm complete all as specified, directed and shown on drawing. |
| 30 | Removing the existing unserviceable front leg and S&F new Teak wood front leg of size 30x55x460mm complete all as specified, directed and shown on drawing. |
| 31 | Removing the existing unserviceable back rest and S&F new Teak wood back rest of size 45x15 slightly curved out of size 45x35mm complete all as specified, directed and shown on drawing. |
| 32 | Removing the existing unserviceable front rail and S&F new Teak wood front rail of size 30x65mm drilling holes at 12.5 mm C/C complete all as specified, directed and shown on drawing. |
| 33 | Removing the existing unserviceable rear rail of size and S&F new Teak wood rear rail of existing size including drilling holes at 12.5 mm C/C complete all as specified, directed and shown on drawing. |
| 34 | Removing the existing unserviceable side rails and S&F new Teak wood side rails of size 30x65 mm including drilling holes at 12.5mm C/C complete all as specified, directed and shown on drawing. |
| 35 | Removing of old unserviceable/broken PVC seat from chair dining and S&F new PVC seat 4mm thick in single piece all as per shape and size complete all as specified, directed and shown on drawing. |
| 36 | Recaning of repaired chair dining with best quality of approved plastic cane 2mm wide, 0.4mm thickand border with 3x0.60 mm cane of white or cream ivory complete all as specified, directed and shown on drawing. |
| 37 | CHAIR DINING OFFICERS (Drg No-FD/E6/MAP/10(R) or similar in MAP )Removing the existing unserviceable rear leg from chair dining officers and S&F new Teak wood rear leg of size 25x50x1200 mm complete all as specified, directed and shown on drawing. |
| 38 | Removing the existing unserviceable front leg from chair dining officers and S&F new new Teak wood front leg of size 25x50x450mm complete all as specified, directed and shown on drawing. |
| 39 | Removing the existing unserviceable front rail and S&Fnew Teak wood front rail of size25x50x450mm complete complete all as specified, directed and shown on drawing. |
| 40 | Removing the existing unserviceable rear rail of size and S&F newTeak wood rear rail of size 25x50x450mm complete all as specified, directed and shown on drawing. |
| 41 | Removing of old unserviceable/damaged existing cushioned Seat from chair and S&F newseat made of75mm thick 40 density foam cushion over 12mm thick commercialplywood BWR grade duly covered with best quality tapestry complete all as specified, directed and shown on drawing. Note:-Sample of tapestry shall be approved by GE. |
| 42 | CHAIR WRITING (535MMx470MMx890MM) ( Drg No-FD-202/FD-250/FD-280) Removing the existing unserviceable rear leg and S&F new Teak wood rear leg of size 55x30x890mm complete all as specified, directed and shown on drawing. |
| 43 | Removing the existing unserviceable front leg and providing and S&F new Teak wood front leg of size 55x30x660mm complete all as specified, directed and shown on drawing. |
| 44 | Removing the existing unserviceable back restand and S&F new Teak wood back rest of size 50 x 15mm slightly curved made out of 50x35mm complete all as specified, directed and shown on drawing. |
| 45 | Removing the existing unserviceable front rail and and S&F new Teak wood front rail of size 30x65mm including drilling holes at @ 12.5 mm C/C complete all as specified, directed and shown on drawing. |
| 46 | Removing the existing unserviceable rear rail and and S&F new Teak wood rear rail of size 30x65mm including drilling holes @ 12.5 mm C/C complete all as specified, directed and shown on drawing. |
| 47 | Removing the existing unserviceable side rails and and S&F new Teak wood side rails of size 30x65mm including drilling holes @ 12.5mm C/C complete all as specified, directed and shown on drawing. |
| 48 | Removing the existing unserviceable broken arm rest of size 60x25 mm and and S&F new Teak wood arm rest complete all as specified, directed and shown on drawing. |
| 49 | Recaning of repaired chair writing with best quality of approved plastic cane 2mm wide, 0.4mm thick and border with 3x0.60mm cane of white or cream/ivory complete all as specified, directed and shown on drawing. |
| 50 | CHAIR EASY ( Drg No-FD-229 or Similar)Removing the existing unserviceable rear leg and and S&F new Teak wood rear leg of size 55x25 mm complete all as specified, directed and shown on drawing. |
| 51 | Removing the existing unserviceable front leg and and S&F new Teak wood front leg of size 50x25mm complete all as specified, directed and shown on drawing. |
| 52 | Removing the existing unserviceable broken arm rest andand S&F new Teak wood arm rest of size 65x25x610mm complete all as specified on drawing or as directed by Engineer-in-charge. |
| 53 | Removing the existing unserviceable front frame and and S&F new Teak wood front frame of size 55x25 mm including drilling holes @ 12.5 mm C/C complete all as specified, directed and shown on drawing. |
| 54 | Removing the existing unserviceable front rail and and S&F new Teak wood front rail of size 50x25 mm complete all as specified, directed and shown on drawing. |
| 55 | Removing the existing unserviceable rear rails and and S&F new Teak wood rear rails of size 50x25mm complete all as specified, directed and shown on drawing. |
| 56 | Recaning of repaired chair easy seat and back of approved quality white or cream ivory with 2mm wide, 0.4mm thick cane and border with 3x0.60 mm cane complete all as specified, directed and shown on drawing. |
| 57 | CHAIR WOODEN BOTTOM WITHOUT ARMS ( Drg No-FD-225, FD-285)Removing of existing unserviceable seat and and S&F new seat made out of 6mm thick plywood commercial BWR grade to Chair wooden bottom with wood/steel screws, rest complete all as specified, directed and shown on drawing. |
| 58 | Removing the existing unserviceable rear leg and and S&F new Teak wood rear leg complete all as specified, directed and shown on drawing. |
| 59 | Removing the existing unserviceable front leg and and S&F new Teak wood front leg ccomplete all as specified, directed and shown on drawing. |
| 60 | Removing the existing unserviceable side rail and and S&F new Teak wood side rail complete all as specified, directed and shown on drawing. |
| 61 | Removing the existing unserviceable front rail and and S&F new Teak wood front rail complete all as specified, directed and shown on drawing. |
| 62 | Removing the existing unserviceable rear rail and and S&F new Teak wood rear rail complete all as specified, directed and shown on drawing. |
| 63 | Replacement of unservicable back rest complete all as specified, directed and shown on drawing. |
| 64 | COMMON FOR ALL CHAIRS (FD-228/ 279/280/225/285 or similar) Removing the existing unserviceable stiffeners andS&F new Teak wood 2nd class hard wood stiffeners of size 25x20 mmcomplete all as specified, directed and shown on drawing. |
| 65 | PEG TABLE (450MMx300MMx380MM) (FD-236/FD-277/FD-384 )M&L for removing the existing unserviceable leg and S&F new Teak wood legcomplete all as specified, directed and shown on drawing. |
| 66 | M&L for removing the existing unserviceable top rail (Shorter side) and S&F new Teak wood top railcomplete all as specified, directed and shown on drawing. |
| 67 | M&L for removing the existing unserviceable bottom rail (longer side) and S&F new Teak wood bottom railcomplete all as specified, directed and shown on drawing. |
| 68 | All as per Sl item No 11.00 here-in-before but stiffener of Peg table. |
| 69 | Removing of old unserviceable top from peg table and S&F new top made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved makecomplete all as specified, directed and shown on drawing. |
| 70 | SOFA SET 4/ 5 PERSON WITH CUSHION ( Drg No-FD-281/FD-373) Removing the existing unserviceable cushion of sofa set, tapastry cloth and replacing with new foam cushion 40 density 100mm thick of size 558mm x 533mm x 100mm duly covered with new tapastry cloth including mulmul completly stiched, rest complete all as specified, directed and shown on drawing. Note :- (i) Each cushion for seat or back will be measured as single unit. (ii)The tapastrycloth shall be mat finish and shall not less than Rs. 390/- per Sq metre and as approved by GE. |
| 71 | Removing the existing unserviceable tapastry cloth of sofa set and replacing with new tapastrycloth mat finish of size 558mm x 533mm x 100mmwith mulmul cloth complete all as specified, directed and shown on drawing. Note : tapastry cloth costing not less than Rs. 390/- per Sq metre and as approved by GE. |
| 72 | Removing the existing unserviceable front leg from Sofa and S&F new first class teak wood ofleg size 70mm x 35 mm x 495mm, rest complete all as specified, directed and shown on drawing. |
| 73 | Removing the existing unserviceable rear leg from Sofa and S&F newfirst class teak wood leg size 70mm x 35 mm x 495mm, rest complete all as specified, directed and shown on drawing. |
| 74 | Removing existing unserviceable Arm restfrom Sofa and S&F newfirst class teak wood Arm Rest of size 35mm x 70mm x 725mm, rest complete all as specified, directed and shown on drawing. |
| 75 | Removing existing unserviceable side railfrom Sofa and S&F newfirst class teak wood side rail of size 35 mm x 100mm x 585mm, rest complete all as specified, directed and shown on drawing. |
| 76 | Removing existing unserviceable bearerfrom Sofaand S&F newfirst class teak wood bearer of size 40mm x 40mm x 725mm, rest complete all as specified, directed and shown on drawing. |
| 77 | Removing existing unserviceable battensfrom Sofa and S&F newfirst class teak woodbattens of size 50mm x 20 mm, rest complete all as specified, directed and shown on drawing. |
| 78 | Removing existing unserviceable front railfrom Sofa three seater and S&F newfirst class teak wood front rail of size 35mmx 100mm x 1590 mm, rest complete all as specified, directed and shown on drawing. |
| 79 | Removing existing unserviceable front rail from Sofa single seaterand S&F new first class teak woodfront rail of size 35mm x 10mm x 530 mm, rest complete all as specified, directed and shown on drawing. |
| 80 | TABLE DRESSING GENTS/MIRROR DRESSING GENTS (Drg No-FD-230/FD-379 or similar in MAP)Replacement of existing unserviceable drawerfor Table dressing gents made out of well seasoned teak wood second class complete all as specified, directed and shown on drawing. Note- Each drawer shall be measured as single unit. |
| 81 | S& F in repairs new mirror 5mm thick of approved make with full frame complete all as specified, directed and shown on drawing. |
| 82 | TABLE DRESSING LADIES ( Drg No- FD-251 or similar) Replacement of existing unserviceable drawerfor Table dressing ladies made out of well seasoned teak wood second class complete all as specified, directed and shown on drawing. Note-Each drawer shall be measured as single unit. |
| 83 | S&F in repairs new Glass shutters of Table dressing ladies complete all as specified, directed and shown on drawing. Note:- Each glass shutter shall be measured as single unit. |
| 84 | Removing the existing unserviceable Aluminium channel and S&F in repairsAluminium Channel complete all as specified, directed and shown on drawing. |
| 85 | S&F in repairs new back support made out of 6 mm thick plywood for mirror of Table dressing ladies complete all as specified, directed and shown on drawing. |
| 86 | S&F in repairs new mirror5 mm thick for Table dressing ladies ofapproved make with complete frame back complete all as specified, directed and shown on drawing. |
| 87 | Removing of existing unserviceable/broken PVC Shoes,and M&L for fixing of PVC shoes superior quality of 20mm dia with suitable screw at the bottom of the leg in the following furniture items complete all as specified, directed and shown on drawing for the followings.Chair Dining, Chair Writing, Chair easy, Chair Wooden bottom without arms,Table centre,Teapoy, Table Peg & Table 3\"x2\" with/without drawer |
| 88 | S&F of Knob of aluminium anodized dark brown in shade as approved by GE in the following furniture items with screws complete all as specified & as directed for the followings.Table Dressing Gents/Ladies, Side Board, Table 3\"x2\" with drawer, Table Writing |
| 89 | TEAPOY WOODEN (Drg No-FD-278/FD-382 or similar)Replacement of existing unserviceable top for Teapoy made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make complete all as specified, directed and shown on drawing. |
| 90 | S&F in repairs to unserviceable damaged legs from teapoy made out of hard wood (Teak) complete rest complete all as specified, directed and shown on drawing. |
| 91 | S&F in repairs to unserviceable damaged bottom stiffners (both short & long) from teapoy made out of hard wood (Teak) rest complete all as specified, directed and shown on drawing. |
| 92 | TABLE DINING 6/4 PERSONS( Drg No- FD-239/FD-273 or similar) S&F in repairs unserviceable damaged legs from Tabledining 8/6/4 persons made out of hard wood (Teak)complete, rest complete all as specified, directed and shown on drawing. |
| 93 | S&F in repairs unserviceable damaged side short rails from Tabledining 6/4 persons made out of hard wood (Teak)complete, rest complete all as specified, directed and shown on drawing. |
| 94 | Replacement of existing unserviceable table top for Table dining 6 persons made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make complete all as specified, directed and shown on drawing. |
| 95 | S&F in repairs to unserviceable damaged front/back long rails from Tabledining 6 persons made out of hard wood (Teak) , rest complete all as specified, directed and shown on drawing. |
| 96 | Replacement of existing unserviceable table top for Table dining 4 persons made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make complete all as specified, directed and shown on drawing. |
| 97 | S&F in repairs to unserviceable damaged front/back long rails from Tabledining 4 persons made out of hard wood (Teak)complete, rest complete all as specified, directed and shown on drawing. |
| 98 | Common for Table dining 6/4 persons ( Drg No- FD-239/FD-273 or similar)S&F in repairs Triangular wooden bracket 100X100X20mm thick hard wood (Teak) for all types of tables between leg & stiffners for extra strengthrest complete all as specified, directed and shown on drawing. |
| 99 | TABLE WRITING (Drg No-FD-249/FD-275 or similar) Replacement of existing unserviceable table top for Table writing made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make complete all as specified, directed and shown on drawing. |
| 100 | S&F in repairs replacement of unserviceable damaged legs from Table writing with new leg made out ofhard wood (Teak) rest complete all as specified, directed and shown on drawing. |
| 101 | S&F in repairs replacement of unserviceable damaged foot rest from Table writing with new foot made out ofhard wood (Teak) rest complete all as specified, directed and shown on drawing. |
| 102 | S&F in repairs replacement of unserviceable damaged stiffner (longer) from Table writing with new stiffner made out ofhard wood (Teak) rest complete all as specified, directed and shown on drawing. |
| 103 | Replacement of damaged back ply in repair complete all as specified, directed and shown on drawing. |
| 104 | S&F 18mm thick prelaminated particle board Cabinet door along with locking arrangement and handles complete all as specified, directed and shown on drawing. |
| 105 | TABLE CENTRE( Drg No-FD-235/FD-274) Replacement ofexisting unserviceable table top for Table centre made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved makecomplete all as specified, directed and shown on drawing. |
| 106 | S&F in repairs to unserviceable damaged legs from Table centre made out of hard wood (Teak) restcomplete all as specified, directed and shown on drawing. |
| 107 | S&F in repairs to unserviceable damaged top rail (long side) from table centre made out of hard wood (Teak) restcomplete all as specified, directed and shown on drawing. |
| 108 | S&F in repairs to unserviceable damaged bottom rail (short side) from table centre made out of hard wood (Teak) restcomplete all as specified, directed and shown on drawing. |
| 109 | TABLE WITH DRAWER/TABLE WITHOUT DRAWER 900x 600 x 760mm Removing of existing unserviceable table top for Table and providing new table top made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved makecomplete all as specified, directed and shown on drawing. |
| 110 | S&F in repairs to unserviceable damaged legs from Table with drawer 900x600x760mm made out ofhard wood (Teak) size 60x30x740mm restcomplete all as specified, directed and shown on drawing. |
| 111 | S&F in repairs to unserviceable damaged side short rails from Table without drawer 900x600x760mm made out ofhard wood (Teak)restcomplete all as specified, directed and shown on drawing. |
| 112 | S&F in repairs to unserviceable damagedlong rails from Table with drawer 900x600x760mm made out ofhard wood (Teak)restcomplete all as specified, directed and shown on drawing. |
| 113 | S&F in repairs to unserviceable damaged bottom stiffners (short side) from Table with drawer 900x600x760mm made out ofhard wood (Teak)restcomplete all as specified, directed and shown on drawing. |
| 114 | S&F in repairs to unserviceable damaged drawers from Table with drawer 900x600x760mm made out ofhard wood (Teak) including providing 6mm thk commercial ply to bottom of drawerrestcomplete all as specified, directed and shown on drawing. |
| 115 | Hat Stand with mirror( Drg No- FD-233) S&F in repairs new mirror5 mm thick with side beadings for Hat stand with mirror ofapproved make complete all as specified, directed and shown on drawing. |
| 116 | Removing of existing unserviceable Back of Hat stand with mirror and S&Fnew Back of 6mm thickplywood commercial fixed with headless nail, rest complete all as specified, directed and shown on drawing. |
| 117 | S&F of brass pegswith brass screw in place of broken/ lost pegs in hat stand with mirror, rest complete all as specified, directed and shown on drawing. |
| 118 | TEAPOY VERANDAH ( Drg No- FD-208/FD-255 or MAP Drg) Replacement of frame of top (without top) of Teapoy Verandah and applying two coat of synthetic enamel paint white colour over a coat of red oxide primer complete all as specified, directed and shown on drawing. |
| 119 | M&L forwelding of broken jointsof Teapoy varandah rest complete all as specified, directed and shown on drawing. |
| 120 | Replacement of existing unserviceable table top for Teapoy verandah in repairs andS&F of new top made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make complete all as specified, directed and shown on drawing. |
| 121 | Replacement of existing unserviceable table top for Teapoy verandah MAP in repairs, S&F of new top made out of 18mm thick exterior grade particle board (ISI marked) duly post formed (PFT) with 0.6mm thick laminates and 2mm thick edging on two sides (colour shade as approved by GE) of approved make complete all as specified, directed and shown on drawing. |
| 122 | S&F Hard PVC/Nylon shoes round/square complete all as specified, directed and shown on drawing. |
| 123 | M&L preparation of old wooden surfaces by scraping and filling bore holes with putty and finally rubbing with sand paper/ abbrasive cloth throughly for smooth and clean surface and applying two coat of french polishover a coat of mension wax polish till the smooth finishing complete all as specified, directed and shown on drawing for the following furniture articles:- |
| 124 | Bed plywood top (Drg No- FD-246 or Similar) |
| 125 | Chair dining/Chair dining PVC Seat ( Drg No- FD-228/279 or Similar) |
| 126 | Chair dining Cushioned(Drg No-FD/E6/MAP/10 (R) or similar in MAP) |
| 127 | Chair Easy (Drg No-FD-229 or Similar) |
| 128 | Chair Writing ( Drg No-FD-280 or Similar) |
| 129 | Chair wooden bottom (Drg No-FD-225/285 or Similar) |
| 130 | Hat Stand with mirror (Drg No-FD-233) |
| 131 | Sofa Set 3 Pcs 5 Seater ( Drg No-FD-281/373) |
| 132 | Sofa Set 4 Seater (Drg No-FD-281/373) |
| 133 | Table dressing Gents with Mirror/Mirror Dressing Gents ( Drg No-FD-230 or Similar in MAP) |
| 134 | Table dressing Ladies with Mirror/Table Dressing Ladies with Stool (DRg No-FD-251) |
| 135 | Peg Table ( Drg No-FD-277/FD-384 or Similar) |
| 136 | Table with/without drawer 900 x 600 x 760mm ( Drg No-FD- 283/284 or Similar) |
| 137 | Table dining 6/4 persons(Drg N0-FD-273 or Similar in MAP) |
| 138 | Teapoy wooden (Drg No-FD-278/382 or Similar) |
| 139 | Table writing ( Drg No-FD-275 or Similar) |
| 140 | Table centre ( Drg No-FD-274 / 235 or Similar) |
| 141 | Schedule of Credit refer to Ser Page No 34 of Tender |
AI Tender Summary
Tender Timeline
Jan 04, 2023
11:30 IST
Tender Published
Tender notice published.
Completed
Jan 11, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJan 11, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 13, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender