Tender For Asphalting Of Road From Futala Overflow Point To Vayusena Nagar
Tender Value
78.21 Lakhs
Estimated cost
Bid Submission
22 Dec 2022
0 days left
EMD
79000
Bank guarantee accepted
Document Fee
1180
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
nagpur → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Asphalting Of Road From Futala Overflow Point To Vayusena Nagar
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 21-Dec-2022 | Defect Liability Period will be 2 Years for This Tender | Other | 22-Dec-2022 |
BOQ
| Sl. No. | Item Description |
| 1 | Asphalting of Road |
| 2 | Scarifyingtheexistinggranularroadsurfacetoadepthof50mm and disposal of scarified material within all lifts and leads upto 1000 metres. |
| 3 | Excavation for roadway in earth, soil of all sorts, sand, gravel or soft murum includingdressingsectiontotherequiredgrade,camber andsideslopesandconveyingtheexcavatedmaterials with all lifts uptoaleadof50m.andspreadingforembankmentorstackingas directed. |
| 4 | Providing and applying tack coat on the prepared surface heating byfamesinBoilerand spraying bitumen withsprayer on Dry / HungryB.T.surface3Kilogram/10SquareMetre.(VG-30bulkbitumen rates are considered to arrive at rates) |
| 5 | BITUMINOUSMACADAM:--Providingandlayingbituminous macadamusingcrushed aggregate of Grading 1, premixed with bituminousbinder, transportedatsitewithVTS,laid over a previously preparedsurface,finishedtotherequiredgrade,level, alignment,androllingto achievethedesired density for 80/100mm compactedthicknesswithdrummixtypehotmixplantwithSCADA having complying essential features of Hot mix plant as per IRC- 272009 specified conditions and attachments such as electronic load sensor based beltconveyers,automaticsynchronizationofbitumenand aggregatefedder,builtindustcontrollersystemandPLCforDrumMix plant ,Sensor paver,and Vibratory roller excluding prime/Tack coat etc. complete --Bitumen3.30% of specified grade (VG-30 bulk bitumen ratesare considered to arrive at rates) |
| 6 | BITUMINOUSCONCRETE:-Providingandlayingbituminousconcrete usingcrushed aggregates of grading 1, premixed with bituminous [email protected],transportedto sitewithVTS,laidoverapreviouslypreparedsurface,finishedtothe requiredgrade,level,alignment,androllingtoachievethedesired compaction for50mmcompacted thicknesswith specifiedgradeof Bitumen,Excluding prime / tack coat.For Bitumen of specified grade -- USINGBatchmixtypehotmixplantwithSCADA,SensorPaver, VibratoryrollerwithStoneDustfiller.(VG-30bulkbitumenratesare consideredto arrive at rates) |
| 7 | RoadMarkingwithHotAppliedThermoplasticCompoundwith ReflectorizingGlassBeadsonBituminousSurface-Providingandlaying ofhotappliedthermoplasticcompound2.5mmthickincluding reflectorizing glassbeads@250 gmsperSquareMetrearea,thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface tobe level, uniform and free from streaksand holes.complete. |
| 8 | Supplying and Fixing of Molded Shank Raised Pavement Markers / Cat\"sEye madeof polycarbonateandABSmouldedbodyand reflectivepanelswithmicroprismaticlenscapableofproviding total internal reflection of the light entering the lens face andshall support a load of 16000Kilogramtested in accordance to ASTM D 4280Type H and complying toSpecifications of Category Aof MORTH Circular No RW/NH/33023/10-97 DO III Dt 11.06. 1997. The height, width and length shallnot exceed 50 mm, 100 mm and 102 +/-2 mm and with minimumreflectiveareaof13Sqcmoneachsideandtheslopetothe base shall be 35 +/- 5 degree. The strength of detachment of the integrated cylindrical shanks, (of diameter not less than 19 +/- 2 mm and height not less than 30+/- 2 mm) from the body is to be a minimum value of500Kilogram.Fixingwillbebydrillingholesontheroadforthe shanks to go inside, without nails and using epoxy resin based adhesive as per manufacturer\"s recommendation and complete as directed by the engineer.Thecontractorshallsubmitatwoyearwarranty for satisfactoryfieldperformanceincludingstipulatedretro-reflectanceof the reflecting panel, to the Engineer. |
| 9 | Providing and applying two coats of synthetic enamel paint of approved colourtonew/oldstructuralsteelworkandwoodworkinbuildings, includingscaffoldingifnecessary,cleaningandpreparingthesurface (excluding primer coat) etc. complete. |
| 10 | Providing and fixing Cautionary/Warning sign boards in Equilateral Trianglesizeof mmmadeoutof mmaluminumsheetbonded with white retro reflective sheeting of Class B ( Type IV High intensity micro-prismatic grade sheeting-HIP) having pressure sensitive/heat activated adhesive retoreflective specified background, borderand backsideretoreflctive symbols,letters,numerals,arrowasper IRC:67-2012TableNo8.3Supportedwithback support frame 25mm x 25mmx3mm,dulypaintedonbacksidewithgreystoveenamelpaint and supported on one Number of M. S. angle iron post of size 65 mm X 65 mm X 6 mm,3.45 m long, duly painted with with flat oil paint having alternate black andwhitebandsof25cmwidthincludingG.I.fixturesetc;fixingthe boardsinM25gradeconcreteblockofsize60cm X 60cm X 75cm includingtransportationetc;complete.ClassB(TypeIVHigh intensitymicro-prismaticgrade sheeting-HIP) shallhave 7yearswritten warrantyfromthemanufacturerandauthoriseddistributor/convertor issued for field performance including the screen printed areas and cut- out sheeting and cut-out durable transparent overlay film and this warrantycertificateinoriginalshouldbesubmittedtotheEngineer |
| 11 | Transportation of Material obtained from debries of various sorts includingnecessaryexcavation/loosingincludingloading,unloading and conveying and disposing as directed. |
AI Tender Summary
Tender Timeline
Dec 21, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Dec 22, 2022
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedDec 22, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 23, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender