Tender For Repair, Renovation Up Gradation Works For Infrastructure Strengthening Of Sub Centre To Be Upgraded To Suswsthya Kendras At Rambha Sc To Hwc Under Gopiballavpur-I Block, Jhargram .(Civil And Electrical Works)
Tender Value
7.52 Lakhs
Estimated cost
Bid Submission
23 Dec 2022
0 days left
EMD
15100
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
rambha → West Bengal
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Repair, Renovation Up Gradation Works For Infrastructure Strengthening Of Sub Centre To Be Upgraded To Suswsthya Kendras At Rambha Sc To Hwc Under Gopiballavpur-I Block, Jhargram . ( Civil And Electrical Works )
BOQ
| Sl. No. | Item Description |
| 1 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. Toilet area |
| 2 | I) Cement concrete with graded stone ballast (40 mm size excluding shuttering)(A) [Pakur Variety] |
| 3 | Repairing crack in wall by cement grout ing (1 : 2) including widening the crack on the surface (into V section) cleaning and packing the same with cement mortar (1 : 2) andfinishing off to match with adjacent surface. (Cement-69 Kg/100 m) |
| 4 | At Gr. Fl. |
| 5 | At 1st. Fl. |
| 6 | (A) Stitching crack in brick wall by carefully cutting out face brick 125 mm. deep into the wall, cleaning the gap and filling up the same with precast cement concrete block carefully set in cement mortar (1:3) including |
| 7 | (i) With plain cement concrete blocks(1:1½:3) with stone chips. |
| 8 | (a) Block size 250 x 125 x 75 mm.,In GR.Fl |
| 9 | Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing rubbish within a lead of 75m as directed. |
| 10 | Total Gr. Fl............. ( |
| 11 | Total1st. Fl............. ( |
| 12 | Dismantling artificial stone flooring upto 50 mm. thick by carefully chiselling without damaging the base and removing rubbish as directed within a lead of 75 m. |
| 13 | a) In Gr. floor |
| 14 | In 1st Floor |
| 15 | Dismantling all types of masonry excepting cement concrete plain or reinforced, stacking serviceablematerials at site and removing rubbish as directed within a lead of 75 m. |
| 16 | In Ground Floor , Store wall |
| 17 | In 1st Floor |
| 18 | Dismantling all types of plain cement concrete works, stacking serviceable materials at site andremoving rubbish as directed within a lead of 75 m. |
| 19 | In ground floor including roof. |
| 20 | (a) upto 150 mm. thick |
| 21 | In 1st Floor |
| 22 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes., |
| 23 | a) Pakur Variety |
| 24 | In ground Fl |
| 25 | In 1st Fl |
| 26 | Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes. In Gr.Fl |
| 27 | (i) Pakur Variety, Beam |
| 28 | In 1st Floor |
| 29 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction. Gr.Fl |
| 30 | i) Tor steel/Mild Steel,( Sail/Tata) |
| 31 | In 1st Floor |
| 32 | Hire and labour charges for shuttering with centering and necessary staging upto 4 m using approved stout props and thick hard wood planks of approved thickness with required bracing for concrete slabs, beams and (upto roof of ground floor) |
| 33 | (a) 25 mm to 30 mm thick wooden shuttering as per decision & direction of Engineer-In- Charge., |
| 34 | In 1st Floor, Lintel Beam |
| 35 | Brick work with 1st class bricks in cement mortar (1:6) |
| 36 | (b) In superstructure, ground floor |
| 37 | (c) In superstructure, 1st floor |
| 38 | 125 mm. thick brick work with 1st class bricks set in cement, sand mortar (1:4) in ground floor. |
| 39 | In 1st Floor |
| 40 | Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfer ing corners as directed , Gr.Fl (i) With 1:4 cement mortar |
| 41 | (b) 10 mm thick plaster, |
| 42 | (i) With 1:6 cement mortar |
| 43 | (c) 15 mm thick plaster, |
| 44 | (i) With 1:6 cement mortar |
| 45 | (c) 15 mm thick plaster, |
| 46 | In 1st Floor |
| 47 | (i) With 1:4 cement mortar |
| 48 | (b) 10 mm thick plaster, |
| 49 | (c) 15 mm thick plaster, 1:6 |
| 50 | (i) With 1:6 cement mortar |
| 51 | (c) 15 mm thick plaster, |
| 52 | Artificial stone in floor, dado, staircase etc with cement concrete (1:2:4) with stone chips, laid in panels as directed with topping made with ordinary or white cement (as necessary) and marble dust in proportion (1:2) including smooth finishing and rounding off corners including raking out joints or roughening of concrete surface and application of cement slurry before flooring works using cement @ 1.75 kg/sq.m all complete including all materials and labour. |
| 53 | In ground floor. 3 mm. thick topping (High polishing grinding on this item is not permitted with ordinary cement). |
| 54 | (ii) 25 mm. thick, In Gr.Fl |
| 55 | (iii) Colouring pink, cream, yellow, green |
| 56 | Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM (B) light colour |
| 57 | In Gr. Floor |
| 58 | In 1st.Floor |
| 59 | Supplying, fitting & fixing 1st quality Ceramic tiles in walls and floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. |
| 60 | With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m. |
| 61 | C) In Gr. Floor |
| 62 | In 1st Floor |
| 63 | With Sand Cement Mortar (1:3) 15 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @0.20kg/Sq.m. |
| 64 | (b) Area of each tile above 0.09 Sq.m |
| 65 | (ii)Other than Coloured decorative incl white |
| 66 | Wall, 1st. Fl |
| 67 | Supplying, fitting and fixing 18 mm. to 22 mm. thick kota stone slab in wall, dado in 15 mm thick [avg] cement mortar (1:3) including making suitable polishing all complete as per direction of Engineer-in-charge including cost of materials, labour, scaffolding, staging, curing complete.[Using cement slurry for bedding @4.4 kg/Sq.m and forjointing @1.8 kg/Sq.m] |
| 68 | In 1st Floor, Lab |
| 69 | Supplying, fitting & fixing granite slabs 15mm to 18 mm. thick with uniform texture & without decorative veins in columns, wall, facia etc. with 15 mm thick [avg] cement mortar (1:2) including making suitable arrangements to hold the stones [Using cement slurry at back side of granite @ 4.4 kg/sq.m & white cement slurry for joint filling @ 1.8 kg/sq.m] |
| 70 | In 1st Floor, Lab |
| 71 | Labour for taking out door and window frame including shutter for repair or replacement of different parts of the frame & refixing the same including mending good all damaes complete. (Concrete and brick work for mending damage will be paid separately) (a) Upto area 2.5 Sq.m |
| 72 | In Gr.Fl |
| 73 | In 1st.Fl |
| 74 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). |
| 75 | (h) Neem,Jam In Gr.Fl |
| 76 | (h) Neem, Jam In 1st.Fl |
| 77 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and otherfittings |
| 78 | a) 35 mm thick shutters (single leaf |
| 79 | In Gr floor. |
| 80 | in 1st floor. |
| 81 | Door |
| 82 | Supplying, fitting and fixing M.S. clamps for door and window frame made of flat bent bar, end bifurcated with necessary screws etc. by cement concrete(1:2:4) as per direction. (Cost of concrete will be paid separately) |
| 83 | (b) 40mm X 6mm, 200mm Length |
| 84 | Iron butt hinges of approved quality fitted and fixed with steel screws, with ISI mark. |
| 85 | (vi) 100mm. X 50mm. X 1.25mm. |
| 86 | i) Iron hasp bolt of approved quality fitted and fixed complete (oxidised) with 16mm dia rod with centre bolt and round fitting. |
| 87 | (a) 200mm long |
| 88 | A) Iron door ring of approved quality fitted and fixed with nut and washer complete. |
| 89 | (ii) 75mm dia. |
| 90 | Anodised aluminium Aldrop / Sliding bolts of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 2681/66) fitted and fixed complete. |
| 91 | (iv) 300mm x 19mm dia. bolt. |
| 92 | Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: |
| 93 | (iii) 100 mm grip x 12 mm dia rod. |
| 94 | Supplying fitting and fixing in position approved P.V.C. door frame (Matt finish) made of extruded P.V.C. multichamber hollow section having dimensions 60mm x 50mm x 2mmcarriage of all materials, taxes and |
| 95 | In Gr & 1st Floor |
| 96 | Supplying, Fitting & Fixing 30 mm thick both side prelaminated Factory made solid Panel PVC Door Shutter consisting of outer frame made out of M.S. tubes of 19 gauge thickness and size 19 mmx19 mm for styles, top and bottom rails, M.S. frame shall have cost of steel primers of which 75mm shall be flat and 20 mm |
| 97 | shall be tapered on both sides to form lock rail. |
| 98 | Supplying,fitting & fixing of 2-Track / 3-Track Aluminium sliding Window of all Aluminium sections viz. window frame (top,bottom & side frame), shutter (top, bottom, side & interlock member) made of aluminium alloy extrusions conforming to IS 733-1983 & IS 1285-1975, annodised conforming to IS 1868-1983, fitted with all other accessories viz. PVC roller, EPDM gasket, 10-12 Micron thickness Annodizing filmNatural white |
| 99 | Supplying, fitting & fixing of partly glazed partly panelled or fully glazed single leaf Aluminium swing door of all aluminium sections viz door frame ( top and side frame), shutter( top rail, bottom rail, lock rail, door with door spring, /aluminium hinges, glass / Panel board all complete as per architectural drawings and direction of Engineer-incharge. ( Excluding cost of glass/ panel board, door spring/ Al hinges, door closer,door stoper, handle, tower bolt and locking arrangment etc) 10-12 Micron thickness Annodizing filmNatural white |
| 100 | Supplying concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction ofEngineer-in-Charge.(b) 250 mm long |
| 101 | B) Supplying 125 mm. Dia acrylic handle for aluminium door as perapproved make & brand.(b) Colour |
| 102 | Supplying 4 lever mortice lock or any approved make and brand as perdirection of the Engineer- in -Charge.ii) 100 mm. |
| 103 | Supplying, fitting and fixing windows & ventilators with or without integarted grills cionforming to I.S. 1038-1975 and manufactured from rolled steel sections conforming to I.S. 7452-1974. |
| 104 | b) Openable steel windows as per I.S. sizes with side hung shutters and horizontal glazing bars, with or without fixed type ventilators ( the rate |
| 105 | In Gr. Fl, for V |
| 106 | In 1st . Fl, for V1 |
| 107 | c) M.S integrated grill as per approved design integrated with steel window or ventilator, joints |
| 108 | continiously welded with M.S flats and bars., Gr.Fl |
| 109 | In 1st Floor |
| 110 | Supplying 1.5mm thick M.S. sheet fitted and fixed on one or both faces of M.S./ W.I. gate etc. with point welding at not more than150mm apart complete in all respect as per design including cost of all labour and materials. |
| 111 | In Gr.Fl Floor |
| 112 | In 1st Floor |
| 113 | (a) M.S.or W.I. Ornamental grill of approved design joints contin uously welded with M.S, W.I. Flats and bars of windows, railing etc. fitted and fixed with necessary screws and lugs in ground floor. |
| 114 | (i) Grill weighing above 10 Kg ./sq .mtr and up to 16 Kg./sq. mtr. |
| 115 | In Gr.floor |
| 116 | In 1st floor |
| 117 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. |
| 118 | i) 4mm thick clear glass. Sliding |
| 119 | Square or hexagonal mesh netting made with 18 B.W.G. galvanised wire, fitted and fixed complete as per design (excluding the supporting framework but including local sal wood battens of size 37.5mmx25mm).In ground floor.. |
| 120 | (b) 25mm mesh |
| 121 | (b) 25mm mesh |
| 122 | (b) Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 123 | i) On Plastered surface ,Gr.Fl.+1st Fl |
| 124 | (a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. |
| 125 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : |
| 126 | iv) Two coats (with any shade except white) |
| 127 | On Plastered surface, Gr.Fl +1st |
| 128 | On Timber surface, Gr.Fl +1st |
| 129 | Other metal Surface, Windows, |
| 130 | Grills Etc. |
| 131 | Scraping of moss, blisters etc.thoroughly from exterior surface of walls necessitating the use of scraper, wire brush etc. (Payment against this item will be made only when this has been done on the specific direction of the Engineer-in-charge) |
| 132 | In Gr. Fl |
| 133 | In 1st. Fl |
| 134 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or cencrete surface old or new surface to receive decorative textured(matt finish) |
| 135 | a) One Coats, Gr. Fl |
| 136 | 1ST Fl. |
| 137 | Protective and Decorative Acrylic exterior emulsion paint of approved quality, as per manufacturer\"s specification and as per direction of EIC to be applied over acrylic primer as required. The rate includes cost of material, labour, scaffolding and all incidental charges but excluding the cost of primer. |
| 138 | In Ground floor (Two Coat) |
| 139 | a) Normal Acrylic Emulsion |
| 140 | In 1stfloor (Two Coat) |
| 141 | Labour for Chipping of concrete surface before taking up Plaster ing work. |
| 142 | 1stfloor roof,deduct mumty |
| 143 | (a) Applying 2 coats of bonding agent with synthetic multi functional rubber emulsion having adhesive and water proofing properties by mixing with waterin proportion (1 bonding agent : 4 water : 6 cement) as per Manufacturer\"s specification 1ST Fl. |
| 144 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as perrelevant IS codes. 1st Fl. |
| 145 | Extra rate for using water proofing and plasticising admixture @ 0.2% by weight of cement (or at manufacturer\"s specified rate) for concrete of variousgrades. |
| 146 | 1.5 mm thick Net cement finish in wall, dado,outside washing |
| 147 | Main signageof Vinyle Board with ACP Boarder 1800X1200 mm |
| 148 | 10 nos Name plate ( 300x150mm) |
| 149 | S & P work |
| 150 | Supplying P.V.C. water storage tank of approved quality with closed top with lid (Black) - Multilayer a) 1000 ltr capacity |
| 151 | Labour for hoisting plastic water storage tank. i) Upto 1500 litre capacity. |
| 152 | Labour for punching hole in plastic water storage tank upto 50 mm dia. |
| 153 | Supplying, fitting and fixing Orissa pattern water closet in white glazed vitreous chinaware of approved make in position complete excluding \"P\" or \"S\" trap (excluding cost of concrete for fixing). i) 580 mm X 440 mm |
| 154 | Supplying, fitting and fixing Anglo-Indian W.C. in white glazed vitreous china ware of approved make complete in position with necessary bolts,nuts etc. (a) With \"P\" trap |
| 155 | Supplying, fitting and fixing Squating plate with integral flushing in white vitreous chinaware of approved make in cement concrete (6:3:1) with jhama chips complete. (Payment of concrete will be paid seperately). (i) 450 mm X 350 mm |
| 156 | Supplying, fitting and fixing Closet seat of approved make with lid and C.P. hinges, rubber buffer and brass screws complete. (b) Anglo Indian (i) Plastic (hallow type) White |
| 157 | Supplying, fitting and fixing 10 litre P.V.C. low-down cistern conforming to I.S. specification with P.V.C. fittings complete,C.I. brackets including two coats of painting to bracket etc. |
| 158 | Supplying, fitting and fixing white vitreous china best quality approved make Wash basin with C.I brackets on 75 mm x 75 mm wooden blocks, C.P. waste fittings of 32 mm dia, one approved quality brass C.P. pillar cock of 15 mm dia, C.P. chain with rubber plug of 30 mm dia, approved quality P.V.C waste pipe with C.P. nut 32 mm dia, 900 mmbrackets with two coats of approved paints(ii) 550 mm x 400 mm |
| 159 | Supplying, fitting and fixing stainless steel sink complete with waste fittings and two coats of painting of C.I. brackets. (ii) 530 mm x 430 mm x 180 mm |
| 160 | (iv) Angle back wash basin 400 mm X 400 mm |
| 161 | Wash basin vitreous china of approved make (without fittings) supplied,fitted and fixed in position on 75mm X 75 mm X 75 mm wood blocks and C.I. brackets including two coats of painting of C.I. brackets. (iv) 400 mm x 400 mm |
| 162 | Supplying,fitting and fixing approved brand 32 mm dia.P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. |
| 163 | (ii) 750 mm long |
| 164 | Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia.(ii) 750 mm long |
| 165 | Supplying, fitting and fixing pillar cock of approved make. |
| 166 | f) (i) CP Pillar Cock with 200 mm extended Lever Handle (Equivalent to Code No. 5031 & Model - FLORENTINE of JAQUAR or similar brand). |
| 167 | a) (ii) CP Pillar Cock Super Deluxe with Aerator - 15 mm. (Equivalent to Code No. 508 & Model No. Tropical / Sumthing Special of ESSCO or similar brand). |
| 168 | Supplying, fitting and fixing bib cock or stop cock. |
| 169 | (a) (i) Chromium plated Bib Cock short body (Equivalent to Code No. 511 & Model - Tropical / Sumthing Special of ESSCO or similar brand). |
| 170 | (b) (i) Chromium plated Stop Cock (Equivalent to Code No. 513(A) & 513(B) & Model - Tropical / Sumthing Special of ESSCO or similar |
| 171 | (e) PTMT (Polytetra Bib Cock / Stop Cock ( Prayag or equivalent) 15 mm |
| 172 | Supply of UPVC pipes (B Type) & fittings conforming to IS-13592-1992 |
| 173 | Rain Water Pipe :- |
| 174 | Supply fitting & fixingof UPVC pipes (B Type) & fittings conforming to IS-13592-1992, Single Socketed 3 Meter Length, 75 mm , In mumty room |
| 175 | (B) Fittings |
| 176 | (ii) Plain Tee 110 mm |
| 177 | v) Plain Y 110 mm |
| 178 | x) Bend 87.5º 110 mm |
| 179 | xi) Door Bend (T.S.) 110 mm |
| 180 | xvi) Pipe Clip 110 mm |
| 181 | xxvi) Reducer 110 X 75 mm |
| 182 | xxxi) Plain Floor Trap with Top tile & Strainer 75mm |
| 183 | Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings For Concealed Works |
| 184 | ii) 15 mm dia. medium quality |
| 185 | (ii) 25 mm dia. medium quality |
| 186 | Supplying, fitting & fixing PVC Pipes of approved ( Medium duty)make with all necessary accessories specials viz bent, union cross elbo etc. |
| 187 | (i) 15mm dia midium quality |
| 188 | (ii) 25mm dia midium quality |
| 189 | (iii) 50 mm dia midium quality |
| 190 | Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. |
| 191 | (ii) 600 mm X 450 mm |
| 192 | Supplying, fitting and fixing soap holder. |
| 193 | (b) Fibre glass |
| 194 | Supplying, fitting and fixing towel rail with two brackets. |
| 195 | (i) 25 mm dia. and 600 mm long |
| 196 | Construction of circular soak well 2.5 metre deep in all types of sandy soils with dry brick work upto 1.6 metre from the bottom having 150 mm intermediate cement brick work (1:4) band all round and cement brick work (1:4) upto 0.90 metre from top with 20mm thick cement plastering (1:4) to inside face upto the depth of cement brickwork, 15mm thick cement plaster (1:4) on outer face from top of the well upto G.L. and 6 mm thick cement plaster (1:4) on top of the R.C.C. cover slab including filling bottom 1.00 metre of inside of the well with brick metal (50 mm to 63 mm size) With 250 mm thick dry brick work and 250 mm thick cement brick work (1:6) and1.00m inside dia |
| 197 | Electrical Work |
| 198 | Distribution wiring in 1.1 KV single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in 20mm size PVC rigid conduit \"FR\" (Precision make) incl. necy. fittings as required |
| 199 | 2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC[1(iii). / E-14] |
| 200 | Finishing of the PVC insulated wire ends by socketting with pin/ ring type copper sockets and insulated tapes etc., including supplying sockets, tapes. |
| 201 | 2x56/0.3 (4 sqmm) + 1x36/0.3 (2.5 sqmm) as ECC [9(ii)/F-5] |
| 202 | 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC [9(i)/F-5] |
| 203 | Supplying and fixing PVC casing-capping [Precision Make] on wall or ceiling, incl. necy. PVC fittings etc. and mending good damages to building work (E-13/10(b)) |
| 204 | Wiring in 1.1 KV grade single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. ( Page No. : E-11 Item No. : 1.) |
| 205 | 2 x 36/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC[1(b). / E-11] |
| 206 | 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC[1(c). / E-11] |
| 207 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface] (E-11/2) |
| 208 | Average run 6 mtr (Sub. Item No. : (b)) |
| 209 | Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to 5A 3 pin flush type plug socket with piano key type switch (Anchor make) fixed on sheet steel fabricated CRC MS switch board with bakelite/perspex (wall matching color) top cover of 3 mm thick flushed in wall by housing the board after cutting brick wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface] (Page No. : E-12 Item No. : 6.) |
| 210 | On Board |
| 211 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light point with 2 no. 2 way piano key type switch fixed on sheet steel fabricated switch board with Perspex/bakelite top cover on wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casingcapping and Switch board both on surface] ( Page No. : E-11 Item No. : 3.) |
| 212 | Average run 9 mtr (Sub. Item No. : (a)) |
| 213 | Supplying and fixing Sheet steel Main Switches on flat iron frame on wall |
| 214 | DP 32 A (Page No. D1 item No.1(a)) Make - HPL/Havells |
| 215 | Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection |
| 216 | 25 A DP MCB [Make - Legrand / Schneider] (Page No. D 6 item No.7) [Emergency DB Incomer, 1st floor and Ground Floor Incomer] |
| 217 | 6-20 A SP MCB [Make - Legrand / Schneider] (Page No. D 6 item No.7) |
| 218 | Supplying and fixing double-door SPN MCB DistributionBoard with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. |
| 219 | 2+12 Way enclosure(607712) [Make - Havells/ Legrand / Schneider] (Page No. D 9 item No.13) [Emergency DB] |
| 220 | Supply & Fixing 240 V, 16 A, 3 pin Modular type plug socket (Brand approved by EIC) with 16A Modular type switch, without plug top on 4 Module GI Modular type switch board with top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Page No. E 18, item No. 9(b)) |
| 221 | Supply & Fixing 240 V, 6 A, 3 pin Modular type plug socket (Brand approved by EIC) with 6A Modular type switch, without plug top on 4 Module GI Modular type switch board with 3 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc. (Page No. E 18, item No. 9(a)) (For Television and Exam Light) |
| 222 | Supply & Fixing 240 V, 4 nos. 6 A, 3 pin Modular type plug socket with 4 nos. 6A Modular type switch (Brand approved by EIC), 16A Modular switch type MCB (C-Curve) and Indicator without plug top on 2 row 18 Module GI Modular type switch board with 2 row 18 Module top cover plate flushed in wall incl. S&F switch board and cover plate and making necy. connections with PVC Cu wire and earth continuity wire etc.(Page No. E 18, item No. 12) (For Computer Board CHO ROOM,) |
| 223 | Supply & Fixing Socket type fan regulator (Step type) (Brand approved by EIC) on existing sheet metal switch board with bakelite/perspex top cover by screw after making housing for regulator knob by cutting bakelite/perspex top cover incl. making necy. connections etc.( E-6/18(a)) |
| 224 | Fixing only ceiling fan complete with blades, canopy, fork, rubber bush etc. incl. S&F connecting wire for down rod upto 30 cm incl. painting the rod with approved paint and making necessaryconnection as required by 2x1.5 sqmm flexible copper wire. ( C-3/21(a)) |
| 225 | Fixing only exhaust fan after making hole in wall and making good damages and smooth cement finish etc. as practicable as possible and providing necy. length of PVC insulated wire and making connection for exhaust of following diameter: 30 cm (12\") ( C-4/28) |
| 226 | Supply & Fixing louver shutter on wall with necy.. bolts & nuts (6 mm dia x 62 mm long ) For Al : 30 cm Exhaust fan (12\")( D-14/32(a)) |
| 227 | Fixing only cabin fan on wall/ceiling by S&F rag bolts, nuts & washers (6 mm dia x 62 mm long ) or as reqd. Incl. S&F 24/0.02 PVC insulated Flexible copper wire 0.5 mt.length (C-4/29) |
| 228 | Supply of 48 inch sweep ceiling fan Similar to --Orient New Breeze/Summer King/Usha-Striker make (Rate Analysis at SPMU ) |
| 229 | Supply of 12inch sweep heavy duty exhaust fan Similar to---EPC make/Orient (Rate Analysis at SPMU) |
| 230 | Supply & delivery of single 4ft LED tube light fitting incl. 4ft LED tube (Mas LEDtube 1200mm) , complete with all accessories. [Philips: TMC 501 P 1xT-LED 22W P3241] or equivalent of Havells, Crompton etc. [Rate Analysis at SPMU] |
| 231 | Supply & Delivery at site 9 watt LED Bulb[Make-Crompton] or equivalent of Havells, Philips etc. [Rate Analysis at SPMU] |
| 232 | Supply & Fixing full Metal body AC Cabin fan 16\" sweep with net guard and all accessories ( Make EPC Tempest / cinni / CG) ( Rate taken from PWD Executive Engineer vetting Estimate) |
| 233 | Fixing only single /twin fluorescent light fitting complete with all accessories directly on wall/ceiling/HW round block and suitable size of MS fastener (C-2/14 (b)) |
| 234 | Fixing only lamp(C-2/11) |
| 235 | District Charge for Electrical Schudle Item |
| 236 | Total G.S.T for the whole Work |
| 237 | Total Labour welfare Cess for the whole Work |
AI Tender Summary
Tender Timeline
Dec 15, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 23, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 26, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender