Tender For Rate Contract In A Type B Type And C Type Quarters - Removing White Wash Or Colour Wash By Steel Brushing And / Or Scraping, Sand Papering And Preparing Wall Surface Smooth Including Repairs To Scraches Including Cost Of Labour, Material Complete As Per Specifications 2 Extra For Removing White Wash Or Colour Wash By Steel Brushing And / Or Scraping, Sand Papering The Ceiling And / Or Sloping Roof Surface Smooth Including Repairs To Scraches, Cost Of Material, Labour, Complete As Per Specifications. 3 Providing And Applying White Cement Based Putty Of Average Thickness 1 Mm, Of Approved Brand And Manufacturer, Over The Plastered Wall Surface To Prepare The Surface Even And Smooth Complete As Per Specifications And As Per Directions Of Engineer In Charge 4 Distempering With Oil Bound Washable Distemper Of Approved Brand And Manufacture To Give An Even Shade :New Work ( Two Coats ) Over And Including Water Thinnable Priming Coat With Cement Primer After Thoroughly Brooming The Surface To Remove All Dirt, Dust, Mortar Drops And Foreign Matter Including Preparing The Surface Even And Sand Paper Smooth, Cost Of Materials, Labour Complete As Per Specifications And As Per Directions Of Engineer-In-Charge. 5 Painting With Synthetic Enamel Paint Of Approved Brand And Manufacture To Give An Even Shade :Two Coats On New Work After Thoroughly Brooming The Surface To Remove All Dirt, Dust, Mortar Drops And Foreign Matter Including Preparing The Surface Even And Sand Paper Smooth, Cost Of Materials, Labour Complete As Per Specifications And As Per Directions Of Engineer-In-Charge. 6 French Spirit Polishing :One Coats On Old Work To Give An Even Surface Including Preparing The Surface After Thorougly Cleaning Oil, Grease, Dirt And Foreign Matter, Sand Papering Smooth , Cost Of Materials, Labour Complete As Per Specifications And As Per Directions Of Engineer-In Charge. 7 Finishing Walls With 100% Premium Acrylic Emulsion Paint Having Voc Less Than 50 Gm / Litre And Uv Resistance As Per Is 15489:2004, Alkali & Fungal Resistance, Dirt Resistance Exterior Paint Of Required Shade ( Company Depot Tinted ) With Silicon Additives, New Work ( Two Coats Applied @ 1.43 Litre / 10 M². Over And Including Priming Coat Of Exterior Primer Applied @ 0.90 Litre / 10 M² With Paint Of Approved Quality To Give An Even Shade, After Thoroughly Brooming The Surface To Remove All Dirt, Dust, Mortar Drops And Foreign Matter Including Preparing The Surface Even And Sand Paper Smooth, Cost Of Materials, Labour Complete As Per Specifications And As Per Directions Of Engineer-In-Charge. 8 Repair To Existing Ply Wood Ward-Robes With 19Mm Plywood, Beading, Laminate And All Necessary Including Cost Of Materials Labour, Lead, Lift Complete As Per Specifications 9 Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot And Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I / C Fixing The Pipes With Clamp At 1.0 M Spacing.This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Directions Of Engineer-In-Charge. Internal Work-Exposed On Wall. 25Mm Nominal Diameter Pipes 10 Demolishing Cement Concrete Manually / By Mechanical Means Including Disposal Of Material To The Appropriate Disposal Area As Per Direction Of Engineer-In-Charge 11 Dismantling Of Flushing Cistern Of All Types ( C.I. / Pvc / Vitreous China / Water Closet ) Including Stacking Of Useful Materials Near The Site And Disposal Of Unserviceable Materials To The Appropriate Disposal Area As Per Direction Of Engineer-In-Charge. 12 Providing And Fixing White Vitreous China Pedestal Type Water Closet ( European Type W.C. Pan ) With Seat And Lid, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) , Conforming To Is : 7231, With All Fittings And Fix Tures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required : W.C. Pan With Isi Marked White Solid Plastic Seat And Lid 13 Providing And Fixing Water Closet Squatting Pan ( Indian Type W.C. Pan ) With 100 Mm Sand Cast Iron P Or S Trap, 10 Litre Low Level White P.V.C. Flushing Cistern, Including Flush Pipe, With Manually Controlled Device ( Handle Lever ) Conforming To Is : 7231, With All Fittings And Fixtures Complete, Including Cutting And Making Good The Walls And Floors Wherever Required: White Vitreous China Orissa Pattern W.C. Pan Of Size 580X440 Mm With Integral Type Foot Rest 14 Providing And Laying Cinder Concrete In Cement 1:15 ( 1 Cement : 15 Cinder Of 12.5Mm Nominal Gauge ) On Terraced Roof Or Sunken Slabs, Laid To Slope Compacting, Including Cost Of Materials, Labour, Curing Complete As Per Specifications. 15 Providing And Laying Cement Concrete Flooring 40 Mm Thick With 20 Mm Nominal Size Stone Aggregate Using 1:2:4 ( 1 Cement : 2 Coarse Sand : 4 Graded Stone Aggregate ) Finished With A Floating Coat Of Neat Cement, Including Cement Slurry Complete. 16 Providing And Laying In Position Plain Cement Concrete For Levelling Course For All Works In Foundation. The Granite / Trap / Basalt Crushed Graded Coarse Aggregates And Fine Aggregates As Per Relevant Is Codes Machine Mixed, Laid In Layers Not Exceeding 150 Mm Thickness, Well Compacted Using Plate Vibrators, Including All Lead & Lifts, Cost Of All Materials Of Quality, Labour, Usage Charges Of Machineries, Curing, And All The Other Appurtenances Required To Complete The Work As Per Technical Specifications. ( The Cost Of Steel Reinforcement & Formwork Shall Be Paid Separately ) . Mix 1:3:6 ( M10 ) Using 20 Mm Nominal Size Graded Crushed Coarse Aggregates 17 Dismantling Stone Slab Flooring Laid In Cement Mortar Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material To The Appropriate Disposal Area As Per Direction Of Engineer-In-Charge. 18 Grouting The Joints Of Flooring Tiles Having Joints Of 3 Mm Width, Using Epoxy Grout Mix Of 0.70 Kg Of Organic Coated Filler Of Desired Shade ( 0.10 Kg Of Hardener And 0.20 Kg Of Resin Per Kg ) , Including Filling / Grouting And Finishing Complete As Per Direction Of Engineer-In-Charge. Size Of Tile 500X500 Mm 19 Providing And Applying Pu Based Elastomeric Liquid Applied Pu Waterproofing Membrane Single Component, Cold Applied, Water Based Acrylic Pu Dispersion With Highly Elastic And Uv Resistant Water Proofing Treatment To The Existing Roof Surface / Chajjas / Sunken Portion Of Wc:Bathroom Applied @ 1.2L / Per M2, Having Tensile Strength Greater Than 1.5N / Mm2, Elongation Greater Than 300% With Solid Content Not Less Than 60% In 2 Coats Including Surface Preparation, Priming The Surface With Water Based Acrylic Primer @0.1 L / M2, And Spreading 60 Gsm Geotextile Between Two Top Coats Completely As Per Specification.The Finished Cost To Include Surface Preparation, Making Coving At Junction, Bore Packing, Treatment Of Construction Joints Completely As Per Specification & With A 10 Years Warranty On Product & Work From Certified Manufacturers As Per The Direction Of The Engineer In Charge. 20 Cutting Out Cracks Of Roof Terrace To V - Section Cleaning Out, Wetting, Grouting With Cement And Sand Slurry 1:3 ( 1 Cement, 3 Sand ) Including Cost Of Materials, Labour, Complete As Per Specifications. 21 Extra For Providing And Mixing Water Proofing Material In Cement Plaster Work In Proportion Recommended By The Manufacturers Including Cost Of Material Etc As Per Specifications And As Per Directions Of The Engineer-In-Charge 22 Finishing Walls With Water Proofing Cement Paint Of Required Shade :New Work ( Two Coats Applied @ 4.84 Kg / 10 M² ) To Give An Even Shade After Thoroughly Brooming The Surface To Remove All Dirt, Dust, Mortar Drops And Foreign Matter Including Preparing The Surface Even And Sand Paper Smooth, Cost Of Materials, Labour Complete As Per Specifications And As Per Directions Of Engineer-In-Charge. 23 Repair To Plaster Of Thickness 12Mm To 20 Mm In Patches Of Area 2.5 M² And Under, Including Cutting The Patch In Proper Shape, Raking Out Joints And Preparing Plastering The Wall Surface With White Cement Based Polymer Modified Self Curing Mortar, Including Disposal Of Rubbish, All Complete As Per The Direction Of Engineer-In-Charge. 24 Providing And Fixing In Position Honnewood Fully Panelled Shutters For Windows With Stiles And Rails Of 35Mm. Thick, 75Mm Wide In Two Halves With Panels Of 25Mm Thick Including Cost Of Materials, Labourcharges, Usage Charges Complete As Per Specifications. 25 Providing And Fixing In Position Windows Half Paneled Shutters At Bottom And Half Glazed At Top For Window Shutters With Honne Wood Stiles And Rails Of 30Mm. Thick, 75Mm Wide In Two Halves With Panels Filled With Mdf Of 18Mm Thick, 3Mm Thick Reeded Glass For Top Panels Fixed With Wooden Beading Including Cost Of Materials, Labour Charges, Usage Charges Complete As Per Specifications. ( Excluding Cost Of Fixtures ) 26 Providing And Fixing In Position Fully Glazed For Windows Shutters With Honne Wood Stiles And Rails Of 35Mm. Thick 75Mm Wide In Single Shutters With 4Mm Thick Plain Glass Fixed With Wooden Beading Including Cost Of Materials, Labour Charges, Usage Charges Complete As Per Specifications. ( Excluding Cost Of Fixtures ) 27 Providing And Fixing In Position Fully Glazed Shutters For Ventilators Side Hung Or Central Pivoted With Honne Wood Stiles And Rails Of 30Mm Thick 50Mm Wide And Central Divider Of 30Mm. Wide, 3Mm Thick Reeded Glass Fixed With Wooden Beading Of Size 10Mm Wide Flushed To The Thickness Of The Frame Including Cost Of Materials, Labour Charges, Usage Charges Complete As Per Specifications. ( Excluding Cost Of Fixtures ) 28 Providing And Fixing Flush Door Shutter Made Out Of Solid Core Block Board Type, Well Seasoned , Chemicaly Treated Hard Wood Battens And Internal Frame With Minimum 45 Mm Wide Wooden Frame Around Door Shutters Covered With Cross Bonded Wooden Sheets ( Core Veneer ) Hot Pressed And Fastened On Both Sides Of The Door Useing Liquid Phenol Formaldehyde Resin As Per Is Specifications 2202 ( Part-I ) 1991. From Manufacturer Complete As Per Specification. -Do- 30 Mm Thick Both Side Teak 29 Providing And Fixing Flush Door Shutter Made Out Of Solid Core Block Board Type, Well Seasoned , Chemicaly Treated Hard Wood Battens And Internal Frame With Minimum 45 Mm Wide Wooden Frame Around Door Shutters Covered With Cross Bonded Wooden Sheets ( Core Veneer ) Hot Pressed And Fastened On Both Sides Of The Door Useing Liquid Phenol Formaldehyde Resin As Per Is Specifications 2202 ( Part-I ) 1991. From Manufacturer Complete As Per Specification. -Do- 30 Mm Thick Both Side Commercial 30 Providing & Fixing 30Mm Thick Factory Made Rigid Foam Prelam Panelled Door Shutters Made From M.S. Tube Of 19X19mm, 19 Gauge For Stiles And 15X15mm For Top & Bottom Rails, Covered With Heat Moulded Prelaminated Pvc C Channel Of 5Mm Thick Sheet & 30X50mm Wide To Form Stiles &5Mm Thick & 75Mm Wide Prelaminated Pvc Sheets For Top Rail, Lock Rail& Bottom Rail On Either Side & 5Mm Thick, 20Mm Wide Cross Pvc Sheet As Gap Insert For Top Rail & Bottom Rail, Panelling Of 5Mm Thick Pvc Sheet Prelaminated On Either Side Fitted In The M.S. Frame, Sealed To The Stiles & Rails With Pvc Designer Beading On Either Side & Joined Together With Solvent Cement Adhesive Etc., Complete As Per Manufacturers Specification & Direction Of Engineer-In-Charge Fixed To Frames With 3 Nos Of 75Mm Aluminium Hinges. With Bothsides Prelam. 31 Float Glass Panes Of Nominal Thickness 5 Mm ( Weight Not Less Than 12.5Kg / M² ) 32 Dismantling Doors, Windows And Clerestory Windows ( Steel Or Wood ) Shutter Including Chowkhats, Architrave, Holdfasts Etc. Complete And Stacking To The Appropriate Disposal Area As Per Direction Of Engineer In-Charge. Of Area 3 M² And Below 33 Repairing Door And Window Frames With Available Wood To The Required Size. 34 Repairing And Fixing Shutters ( Panelled Or Glazed ) To Doors, Windows, Ventilators And Cupboards. 35 Taking Out Existing Wooden Door Shutter, Repair By Cutting, Painting Etc. And Refixing Of Repaired Door Shutters To Existing Door Frames, Including Replacement Of Hinges With Screws, Etc. As Required, All Complete As Per The Direction Of The Engineer-In-Charge. 36 Dismantling Tile Work In Floors And Roofs Laid In Cement Mortar Including Stacking Material To The Appropriate Disposal Area As Per Direction Of Engineer-In-Charge. For Thickness Of Tiles 10 Mm To 25 Mm 37 Providing And Laying Vitrified Tiles In Different Sizes ( Thickness To Be Specified By Manufacturer ) , With Water Absorption Less Than 0.08 % And Conforming To I.S. 15622, Of Approved Make, In All Colours & Shade, Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement: 3 Coarse Sand ) , Jointing With Grey Cement Slurry @ 3.3 Kg / M2 Including Grouting The Joint With White Cement & Matching Pigments Etc. Complete. Size Of Tile 600X600 Mm 38 Providing And Laying Ceramic Glazed Floor Tiles Of Size 300X300 Mm ( Thickness To Be Specified By The Manufacturer ) Of 1St Quality Conforming To Is : 15622 Of Approved Make In Colours Such As White, Ivory, Grey, Fume Red Brown, Laid On 20 Mm Thick Cement Mortar 1:4 ( 1 Cement: 4 Coarse Sand ) , Jointing With Grey Cement Slurry @ 3.3 Kg / M2 Including Pointing The Joints With White Cement And Matching Pigment Etc., Complete 39 Providing And Fixing 1St Quality Ceramic Glazed Wall Tiles Conforming To Is: 15622 ( Thickness To Be Specified By The Manufacturer ) , Of Approved Make, In All Colours, Shades Except Burgundy, Bottle Green, Black Of Any Size As Approved By Engineer- In-Charge, In Skirting, Risers Of Steps And Dados, Over 12 Mm Thick Bed Of Cement Mortar 1:3 ( 1 Cement : 3Coarse Sand ) And Jointing With Grey Cement Slurry @ 3.3Kg Per M2, Including Pointing In White Cement Mixed With Pigment Of Matching Shade Complete. 40 Providing And Fixing Bright Finished Brass Hanging Type Floor Door Stopper With Necessary Screws, Etc. Complete 41 Providing And Fixing Aluminium Tower Bolts, Isi Marked, Anodised ( An Odic Coating Not Less Than Grade Ac 10 As Per Is : 1868 ) Transparent Or Dyed To Required Colour Or Shade, With Necessary Screws Etc. Complete 42 Providing And Fixing 600X450 Mm Beveled Edge Mirror Of Superior Glass ( Of Approved Quality ) Complete With 6 Mm Thick Hard Board Ground Fixed To Wooden Cleats With C.P. Brass Screws And Washers Complete. 43 Cleaner 44 Plumber 45 Carpenter Class I 46 Unskilled Mazdoor Light 47 Hydrochloric Acid 48 Wire Mesh 50Mm X 50Mm Size Of 3Mm Wire 49 Tractor-Trolley 50 Providing And Fixing Double Scaffolding System ( Cup Lock Type ) On The Exterior Side Of Building / Structure, Upto 25 Metre Height, Above Ground Level, Including Additional Rows Of Scaffolding In Stepped Manner As Per Requirement Of Site, Made With 40Mm Dia M.S. Tube, Placed 1.5 Metre Centre To Centre, Horizontal & Vertical Tubes Joint With Cup & Lock System With M.S. Tubes, M.S. Tube Challis, M.S. Clamps And Staircase System In The Scaffolding For Working Platform Etc. And Maintaining It In A Serviceable Condition For Execution Of Work Of Cleaning And / Or Pointing And / Or Applying Chemical And Removing It Thereafter. The Scaffolding System Shall Be Stiffened With Bracings, Runners, Connecting With The Building Etc, Wherever Required, If Feasible, For Inspection Of Work At Required Locations With Essential Safety Features For The Workmen Etc., Complete As Per Directions And Approval Of Engineer-In-Charge. Note:- The Elevational Area Of The Scaffolding Shall Be Measured For Payment Purpose. 51 Providing And Laying Polished Granite Stone Flooring In Required Design And Patterns, In Linear As Well As Curvilinear Portions Of The Building All Complete As Per The Architectural Drawings With 18 Mm Thick Stone Slab Over 20 Mm ( Average ) Thick Base Of Cement Mortar 1:4 ( 1 Cement : 4 Coarse Sand ) Laid And Jointed With Cement Slurry And Pointing With White Cement Slurry Admixed With Pigment Of Matching Shade Including Rubbing , Curing And Polishing Etc. All Complete As Specified And As Directed By The Engineer-In-Charge. ( Black Colour ) 52 Dismantling C.I. Or Asbestos Rain Water Pipe With Fittings And Clamps Including Stacking The Material To The Appropriate Disposal Area As Per Direction Of Engineer-In-Charge.100Mm Diameter Pipe 53 Providing And Fixing Wall Face Unplasticised Rigid Rain Water Pipes Conforming To Is 13592 Type A Including Jointing With Seal Ring Conforming To Is 5382 Leaving 10Mm Gap For Thermal Expansion ( I ) Single Socketed 100Mm Diameter 54 Providing And Fixing Brass Bib Cock Of Approved Quality : 20 Mm Nominal Bore 55 Providing And Fixing Ptmt Bib Cock Of Approved Quality And Colour. 15 Mm Nominal Bore, 122Mm Long, Weighing Not Less Than 99 G 56 Providing And Fixing Ptmt Bib Cock Of Approved Quality And Colour. 15 Mm Nominal Bore, 90 Mm Long, Weighing Not Less Than 93 G 57 Providing And Fixing C.P. Brass Angle Valve For Basin Mixer And Geyser Points Of Approved Quality Conforming To Is:8931 58 Providing And Fixing Ptmt Stop Cock Of Approved Quality And Colour 20 Mm Nominal Bore, 89 Mm Long, Weighing Not Less Than 88 G 59 Providing And Fixing P.V.C. Waste Pipe For Sink Or Wash Basin Including P.V.C. Waste Fittings Complete. Flexible Pipe 40 Mm Dia 60 Providing And Fixing 100 Mm Sand Cast Iron Grating For Gully Trap. P.V.C. Waste Fittings Complete. 61 Providing And Fixing In Position 25 Mm Diameter Mosquito Proof Coupling Of Approved Municipal Design. P.V.C. Waste Fittings Complete. 62 Providing And Fixing Ptmt Towel Ring Trapezoidal Shape 215 Mm Long, 200 Mm Wide With Minimum Distances Of 37 Mm From Wall Face Withconcealed Fittings Arrangement Of Approved Quality And Colour, Weighing Not Less Than 88 G. 63 Providing And Fixing Ptmt Towel Rail Complete With Brackets Fixed To Wooden Cleats With Cp Brass Screws With Concealed Fittings Arrangement Of Approved Quality And Colour. 600 Mm Long Towel Rail With Total Length Of 645 Mm, Width 78 Mm And Effective Height Of 88 Mm, Weighing Not Less Than 190 G. 64 Providing & Fixing Of 2-Track X 2-Panel Sliding Windows Made Out Of Multi Chambered Upvc ( Matching To Ral-9016 ) Sections And With Minimum Tio2 ( Titanium Dioxide ) At 6Phr With Tpe ( Thermo Plastic Elastomer ) And Lead Free, Gaskets -Grey Colour Having Isolated Drainage And Reinforced With Galvanized Iron Profile Through-Out The Window Frame. The Outer Frame Having A Overall Size Of 60Mm Width X 45Mmheight With Reinforcement Of 1Mm Thickness And Sash With Overall Size Of 39Mm X 58Mm With Gi Reinforcement Of 1Mm For The Frame And 1.5 Mm For The Sash. Coextruded Glazing Bead For Fixing Of Glass Shall Be Of Size 20Mm X 24Mm. Windows Shall Be Provided With 5Mm Plain Float Glass, Standard Hardware& Single Point Locking System With Touch Lock. Wall Thickness Of Frame & Sash Shall Be Of 2-2.5 Mm. Maximum Possible Size – 1819Mm X 1819Mm ( The Cost Is Inclusive Of All Fixtures And Separate Charges For Minor T&Ps Shall Not Be Made ) 65 Providing 15 Mm Cement Plaster On The Rough Side Of Single Or Half Brick Wall Of Mix 1:4 ( 1 Cement: 4 Fine Sand ) Including Rounding Off Corners Wherever Required Smooth Rendering, Providing And Removing Scaffolding, Including Cost Of Materials, Labour, Curing Complete As Per Specifications And As Per Directions Of Engineer-In Charge. 66 Providing 12 Mm Cement Plaster With Cement Mortar 1:4 ( 1 Cement:4 Fine Sand ) To Brick Masonry Including Rounding Off Corners Wherever Required Smooth Rendering, Providing And Removing Scaffolding, Including Cost Of Materials, Labour, Curing Complete As Per Specifications And As Per Directions Of Engineer-In-Charge. 67 Providing And Injecting Chemical Emulsion For Pre-Constructional Anti-Termite Treatment, Creating Continuous Chemical Barrier Under And Around The Column Pits, Walls, Trenches, Basement Excavation, Top Surface Of The Plinth Filling, Junction Of Wall And Floor, Along The External Perimeter Of Building, Expansion Joints, Over The Top Surface Of Consolidated Earth On Which Apron Is To Be Laid, Surrounding Of Pipes And Conduits With Chlorpyriphos 20% E.C. / Lindane 20% E.C. @3.19 L / M2 Including Cost Of Chemical, Diluting In Water To One Percent Concentration, Labour, Usage Charges Of Machinery, Complete As Per Specifications.Providing, Diluting And Injecting Chemical Emulsion For Post-Constructional Antitermite Treatment With Chlorpyriphos / Lindane E.C. 20% With 1%Concentration 68 Providing And Fixing Wash Basin With C.I. Brackets, 15 Mm Ptmt Pillar Cock, 32 Mm Ptmt Waste Coupling Of Standard Pattern, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required. White Vitreous China Flat Back Wash Basin Size 550X400 Mm With Single 15 Mm Ptmt Pillar Cock. 69 Providing And Fixing C.P. Brass Shower Rose With 15 Or 20 Mm Inlet To Wooden Cleats With Cp Brass Screws With Concealed Fittings Arrangement Of Approved Quality And Colour. 100 Mm Diameter Effective Height Of 88 Mm, Weighing Not Less Than 190 G. 70 Providing And Fixing Stainless Steel A Isi 304 ( 18 / 8 ) Kitchen Sink As Per Is:13983 With C.I. Brackets And Stainless Steel Plug 40 Mm, Including Painting Of Fittings And Brackets, Cutting And Making Good The Walls Wherever Required : 610X510 Mm Bowl Depth 200 Mm 71 Providing And Laying Red Oxide Flooring 40 Mm Thick, With An Under Layer Of 30Mm Thick M-15 Cement Concrete And Top Layer Of 10Mm Thick Plaster With 1:3 Cement Mortar Mixed With Red Oxide Finished With Floating Coat Of Neat Cement Mixed With Red Oxide ( Mix Of Same Proportion ) , Including Cost Of Materials, Labour, Curing, Complete As Per Specifications. 72 Providing Flooring With 25Mm Thick Polished Cuddapah Slabs Using Cement Mortar 1:6, 25Mm Thick Over Existing Cement Concrete Bed Or Top Of Roof Laid To Line And Level And Jointed With Cement Slurry Mixed With Pigment To Match The Shade Of The Slab , Including Cost Of Materials, Labour, Curing, Polishing Complete As Per Specifications. 73 Providing & Fixing Corrugated G.S. Sheet Roofing Including Vertical / Curved Surface Fixed With Polymer Coated J Or L Hooks, Bolts And Nuts 8 Mm Diameter With Bitumen And G.I. Limpet Washers Or With G.I. Limpet Washers Filled With White Lead, Including A Coat Of Approved Steel Primer And Two Coats Of Approved Paint On Overlapping Of Sheets Complete As Per Design Drawings ( Up To Any Pitch In Horizontal / Vertical Or Curved Surfaces ) , Excluding The Cost Of Purlins, Rafters And Trusses And Including Cutting To Size And Shape Wherever Required As Per The Direction Of Engineer In Charge.0.63 Mm Thick With Zinc Coating Not Less Than 275 G / M² 74 Providing And Fixing Steel Work In Built Up Tubular ( Round, Square Or Rectangular Hollow Tubes Etc. ) Trusses Etc., Including Cutting, Hoisting, Fixing In Position And Applying A Priming Coat Of Approved Steel Primer, Including Welding And Bolted With Special Shaped Washers Etc.Complete. Hot Finished Welded Type Tubes Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications And As Per Directions Of The Engineer-In-Charge. 75 Providing And Fixing Angle Iron Frames For Doors, Windows And Ventilators Of Mild Steel Angle Sections Of Size 35X35x5 Mm, Joints Mitred And Welded By Angle Iron 35X35x5 Mm Or 35X 5 Mm Flat Pieces To The Existing T-Iron Frame Or To The Wall With Dash Fastener, Including Fixing Of Necessary Butt Hinges And Screws And Applying A Priming Coat Of Approved Steel Primer, All Complete As Per The Direction Of Engineer-Incharge Including Cost Of Materials, Labour, Usage Charges Of Machinery Complete As Per Specifications. 76 Galvanised Steel J Or L Hooks 8 Mm Dia 77 Uv Stabilised 2 Mm Thick Corrugated Frp Sheet 78 Providing Cement Mortar 1:4 ( 1 Cement : 4 Fine Sand ) Including Cost Of All Materials, Labour And Usage Charges Of Machinery Complete As Per The Direction Of Engineer Incharge Of Work. 79 Mason Or Brick Layer Class -1 80 Raking Out Joints Of Stone Masonry Surface To The Required Width And Depth, With Due Care And Precaution, By Mechanical / Manual Means, Including Preparing And Cleaning The Surface For Re-Pointing / Refilling Of Joints, Including Disposal Of Rubbish To The Dumping Ground To Nearest Area. 81 Cleaning And Desilting Of Gully Trap Chamber, Including Removal Of Rubbish Mixed With Earth Etc. And Disposal Of Same, All As Per The Direction Of Engineer-In- Charge. 82 Disconnecting Damaged Overhead / Terrace Pvc Water Storage Tank Of Any Size From Water Supply Line And Removing From The Terrace Including Shifting At Ground Level As Per Direction Of Engineer-In-Charge. 83 Providing And Fixing Chlorinated Polyvinyl Chloride ( Cpvc ) Pipes, Having Thermal Stability For Hot And Cold Water Supply, Including All Cpvc Plain & Brass Threaded Fittings, I / C Fixing The Pipes With Clamp At 1.0 M Spacing.This Includes Jointing Of Pipes & Fittings With One Step Cpvc Solvent Cement And Testing Of Joints Complete As Per Directions Of Engineer-In-Charge. Internal Work-Exposed On Wall. 20Mm Nominal Diameter Pipes 84 Supplying Pvc Ringtite Pipes Conforming To Is 4985:2000 With Latest Amendments And Conveying To Worksite, Rolling And Lowering Into Trenches, Laying True To Line And Level And Perfect Linking At Joints, Testing And Commissioning, Including Loading Unloading At Both Destinations And Cuts Of Pipes Wherever Necessary Including Jointing Of Pvc Pipes And Specials ( Excluding Cost Of Specials ) With Jointing Of Approved Type, With All Labour With All Lead & Lift Including Encasing The Pipe Alround To A Depth Of Not Less Than 15 Cms. With Soft Gravel Or Selected Earth Available From The Excavation Etc. Complete And Giving Necessary Hydraulic Test To The Required Pressure As Per Iss ( Contractor Will Make His Own Arrangements For Procuring Water For Testing ) Etc. For: Pvc Pipes 75Mm Dia., 6 Kg / Sqcm & Class 3 85 Supplying Pvc Ringtite Pipes Conforming To Is 4985:2000 With Latest Amendments And Conveying To Worksite, Rolling And Lowering Into Trenches, Laying True To Line And Level And Perfect Linking At Joints, Testing And Commissioning, Including Loading Unloading At Both Destinations And Cuts Of Pipes Wherever Necessary Including Jointing Of Pvc Pipes And Specials ( Excluding Cost Of Specials ) With Jointing Of Approved Type, With All Labour With All Lead & Lift Including Encasing The Pipe Alround To A Depth Of Not Less Than 15 Cms. With Soft Gravel Or Selected Earth Available From The Excavation Etc. Complete And Giving Necessary Hydraulic Test To The Required Pressure As Per Iss ( Contractor Will Make His Own Arrangements For Procuring Water For Testing ) Etc. For: Pvc Pipes 110Mm Dia., 6 Kg / Sqcm & Class 3 86 Providing And Fixing Brass Full Way Valve Gate With C.I. Wheel Of Approved Quality ( Screwed End ) : 25 Mm Nominal Bore 87 C.P. Brass Stop Cock ( Concealed ) 15 Mm 88 Welder 89 Demolishing Brick Work Manually / By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material To The Appropriate Disposal Area As Per Direction Of Engineer-In-Charge. In Cement Mortar 90 Demolishing R.C.C. Work Manually / By Mechanical Means Including Stacking Of Steel Bars And Disposal Of Unserviceable Material To The Appropriate Disposal Area As Per Direction Of Engineer-In-Charge. => Limited
