Food Corporation Of India-FCI has published Tender For Modernization/Improvement Of Illumination And Standardization Of Electrification At Bsc, Gudivada For The Year 2022-23. Submission Date for this Tender is 26-12-2022. Electrical Maintenance Tenders in gudivada Andhra Pradesh. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Earthing with 60mm outer dia ,2 mtr length GI earthing electrode, completely filled with conductive crystalline compound ,fitted with minimum of 40x6x2000mm GI strip including 50 kgs of eco friendly maintenance free earthing compound to enhance soil conductivity and providing masonry enclosure with cover plate having locking arrangement etc at the site of work as specified by the engineer incharge. |
2 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
3 | Supplying, installation, Testing and commissioning of70W LED Street light fitting made up of pressure die cast alluminium housing and fixing on wall/truss/pole with suitable clamps and nut bolts including giving connection etc., at site of work as required.(NABL certified as per ISO/IEC specification) (RatingIP66,Luminare efficacy>120Lm/W,CRI>80). |
4 | Supplying and fixing of Hot press moulded SMC junction Box of size 140x140x95 with 6A SP MCB, 2/4 way strip connector including testing commissioning etc. as reqd.(NABL certified as per ISO/IEC specification) |
5 | Supplying, installation, testing andcommissioningof 1200mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC) motor, class of insulation: B, 3 no.s blades, 30 cm long down rod, 2 no.s canopies, shackle kit, safety rope, copper winding, power factor not less than 0.9, Service value (CMM/W) minimum 6.85, Air delivery minimum 215 CMM, 350 RPM (tolerance as per IS : 374-2019), THD less than 10%, remote or electronic regulator unit forspeed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max), insulation resistance more than 2 mega ohm, suitable for 230v, 50Hz, single phase AC supply, earthing etc. complete as required. |
6 | Supplying, installation, testing andcommissioningof 20W LED T8 tube with AI body, PC diffuser and inbuilt driver with efficacy min of 100 lumens/W along with Highly robust box type luminare suitable for single T8 LED tube and fixing on wall/ceiling by using necessary clamps and also dismantling the existing fitting at the site of work as required. (NABL certified as per ISO/IEC specification) |
7 | Supplying and fixing of single phase, 230V,50Hz, 300mm dia sweep, 4 blade Exhaust fan with bird screen for protection against birds & foreign material and fixing on the wall surface including giving connections etc. at site of work as required. (NABL certified as per ISO/IEC specification) |
8 | Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required. |
9 | Supplying and laying of 1.1 KV grade Aerial Bundled Cable (three phase conductors of 35 sq.mm and insulated reduced neutral conductor around bare supporting messenger) including giving connection etc at site of workas required. |
10 | Providing M.V. danger notice plate of 200 mm X 150mm, made of mild steel, at least 2 mm thick, and vitreous enameled white on both sides, and with inscription in single red colour on front side as required. |
11 | Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6 mm thick G.I. base plate including holes etc. complete as required |
12 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For horizontal run) |
13 | Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required.(For vertical run) |
14 | Supply of 2m x 1m x 6mm thick corrugated rubber mat as required conforming to relevant ISI specification (suitable for electrical application) |
15 | CREDIT ITEMS |
16 | Dismantled ACSR conductor |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail