Tender For Works Contract For Rural Kolathur Sectionin Mettur Division -Excavation Of Pole Pit Upto 27 ( 8.0 M ) Pole By Using Jcb 3 Excavation Of Pole Pit For 30 Rcc Pole / 9.00M Psc Pole By Using Jcb Or Manual 4 Stay Pit 4.5 To 5 Depth By Using Jcb Or Manual 5 Erection Of Psc / Rcc Poles Upto 8.00M. ( 27 ) By Using Crane Or Manual Erection Of Psc / Rcc Poles Upto 9.14M. ( 30 ) By Using Crane Or Maual 7 Erection Of Stay Set Complete 8 Fixing Of Ht V Cross Arms ( All Types ) / Channel Cross Arms / Guarding Cross Arms 9 Fixing Of Lt 3 Phase Cross Arms 10 Fixing Of Lt Single Phase Cross Arms 11 Fixing Of Ht / Lt Ti Fittings 12 Ii ) Fixing Of Ht Pin Insulators 11 Kv 13 Fixing Of Ht 11 Kv Strain Disc. 14 I ) Fixing Of Lt Pin Insulator 15 Ii ) Fixing Of Lt Shackle 16 Iii ) Fixing Of Aluminium Knob 17 Paving And Stringing Of 7 / 4.09 Mm Acsr 18 Paving And Stringing Of 7 / 3.35 Mm Acsr 7 / 3.0 Mm Aaac 19 Paving And Stringing Of 7 / 2.59 Mm / Acsr 7 / 2.11 Mm Acsr 20 Erection Of Hvds Complete Inclusive Of Following Works - Excavation Of Pole Pits Sizing 2 X 2 X 6, Erection Of Poles, Erection Of Base Plate, Erection Of Structure Materials , Erection Of Ab Switch And Hg Fuse, Structure Earthing Complete , Pole Concreting ( 2 X 2 X 6 ) For Both Base And Sleeve Including Supply Of Jelly, Sand And Cement By The Contractor In The Ratio Of Concreting 1:3:6 , Plinth Erection With Plastering Ratio 1:2 Including Supply Of Cement And Sand , Fixing Of Open Type Fuse Units, Ht / Lt Las Fixing And Las Earthing Through Pvc Pipe 0.5 , Provision Of Bus-Bar Arrangement, Erection Of Stay Set Complete, Jumpering, Erection Of Support Angles And Insulators If Any , Alteration Of Materials In Lathe Works If Any, Provision Of Danger Board, 3 Nos Earth Pits Including Erection Of Cement Collar , Painting Of Metal Parts, Including Loading, Unloading, Transportation Of All Required Materials From Stores To Site , Road Site To Pit Spot As Per The Directions By The Tangedco Site Engineer ( This Includes Labour For Loading, Unloading, Transporting And Rent For Crane Lorry, All T&P Suchas Crowbars, Siling, Dshackle Etc., That Must Be Brought 21 Erection Of Dt Structure With Ab Switch, Top Channal Cross Bracing Earthing Painting Providing Stay Include Concreating 22 Erection Ofdouble Pole Transformer Structure Complete Inclusive Of Following Works - Excavation Of Pole Pits Sizing 2 X 2 X 6, Erection Of Poles, Erection Of Base Plate, Erection Of Structure Materials , Erection Of Ab Switch And Hg Fuse, Structure Earthing Complete , Pole Concreting ( 2X26 ) For Both Base And Sleeve Including Supply Of Jelly, Sand And Cement By The Contractor , Plinth Erection With Plastering Ratio 1:2 Including Supply Of Cement And Sand , Fixing Of Open Type Fuse Units, Ht / Lt Las Fixing And Las Earthing Through Pvc Pipe 0.5 , Provision Of Bus-Bar Arrangement, Erection Of Stay Set Complete, Jumpering, Erection Of Support Angles And Insulators If Any , Alteration Of Materials In Lathe Works If Any, Provision Of Danger Board, 3 Nos Earth Pits Including Erection Of Cement Collar , Painting Of Metal Parts, Including Loading, Unloading, Transportation Of All Required Materials From Stores To Site , Road Site To Pit Spot As Per The Directions By The Tangedco Site Engineer ( This Includes Labour For Loading, Unloading, Transporting And Rent For Crane Lorry, All T&P Suchas Crowbars, Siling, Dshackle Etc., That Must Be Brought 23 Transport Of Materials. Below 8 Kms. 24 Loading & Unloading Of Line Materials 25 Loading Of Pole 9.14M & 9.00 Mtr ( Rcc&Psc Poles ) 26 Unloading Of Pole 9.14M & 9.00 Mtr ( Rcc&Psc Poles ) 27 Loading Of Pole7.5 / 8.0M ( Rcc &Psc Poles ) 28 Unloading Of Pole 7.5 / 8.0M ( Rcc &Psc Poles ) 29 Loading &Unloading Of Transformer Upto 100Kva 30 Loading & Unloading Of Transformer Above 200Kva 31 Erection Of New Transformer All Capacity 32 Transportation Of Poles From Road Side To Pole Pit Including Loading And Unloading Of Pole By Using Jcb Or Manual Upto 100Mtr 33 Transportation Of Poles From Road Side To Pole Pit Including Loading And Unloading Of Pole By Using Jcb Or Manual Beyand 100Mtr 34 Dismandling Of Rcc / Psg Pole 8.0Mtr / 7.5Mtr 35 Dismandling Of V X Arm, Channel X Arm, Guarding X Arm ( All Types ) 36 Dismandling Of Lt 3 Phase X Arm 37 Dismandling Of Lt Single Phase X Arm 38 Dismandling Of Ht / Lt Ti Fitting 39 Dismandling Of 11Kv Strain Disc 40 Dismandling Of 11K Pin Insulator 41 Dismandling Of Lt Shackle 42 Dismandling Of Lt Pin Insulator 43 Dismandling Of Aluminium Knob 44 Dismandling Of Acsr 7 / 3.35Mm Conductor 45 Dismandling Of Acsr 7 / 2.59Mm / 7 / 2.11Mm Conductor 46 Clearing Of Branch Of Trees 47 Labour Charges For Alternation Of Clamp
