Tender For Conversion Of Ht Over Head Line To Underground Ht Cable (2 Run) From Pole No. F-59 (Near Sub-Station No. 10) To Pole No. F-127 (Near A-5 Section/Sub-Station No.7) Inside Factory At Ofk.
Tender Value
59.65 Lakhs
Estimated cost
Bid Submission
28 Dec 2022
0 days left
EMD
1.14 Lakhs
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
khamaria → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Conversion Of Ht Over Head Line To Underground Ht Cable (2 Run) From Pole No. F-59 (Near Sub-Station No. 10) To Pole No. F-127 (Near A-5 Section/Sub-Station No.7) Inside Factory At Ofk.
BOQ
| Sl. No. | Item Description |
| 1 | Excavating in trenches not exceeding 0.50 m wide and 1.0m depth for HT cables and getting it out in hard/dense soil for laying of U/G cable. Complete all as specified & directed. Note: Digging by JCBs are not allowed. |
| 2 | Sand cushioning in cable trenches 20 cm thick for HT cable including material & labour. |
| 3 | Supplying& laying un-reinforced precast concrete cable cover class HVPtype 2 peak size 450mmx180mmx40mm with identification of cable cover with material & labour. |
| 4 | Returning filling in, including spreading,levelling,watering and well ramming in layers not exceeding 25 cm. |
| 5 | GI pipe medium grade 100mm dia with all fittings and fixed completelyto poles & laid in trenches with material & labour. |
| 6 | Demolition & dismantling Cement concrete in ground floors & pavings not exceeding 15 cm thick below or above ground level. |
| 7 | M&L PCC Type B2, mixed by volume 1:2:4 with 40 mm normal size graded coarse aggregate. |
| 8 | Excavating over areas, not exceeding 0.5 m deep and getting out Hard/dense soil. Complete all as specified & directed. |
| 9 | Brick work with subclass \"B\" bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:4. |
| 10 | Hardcore of gauge not exc. 63 mm, deposited, spread and levelled in layers not exc. 8 cm thick, watered and rammed to a true surface broken stone or boulders with M&L. Complete all as specified & directed. |
| 11 | Shingle filling in floors or pavings, laid in layers n exc. 2.5 cm thick, spread, levelled, and blinded with earth and rammed including watering. Complete all as specified & directed. |
| 12 | Cement concrete type B-1, 1:2:4 (20 mm graded aggregate) 145mm thick, foregoing for reinforced,Finishing cement concrete surface even and smooth without using extra cement.Complete all as specified & directed. |
| 13 | Mild steel TMT bars 6mm to 8mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not lass than 0.9 mm dia or securing with clips. Complete all as specified & directed. |
| 14 | Renderig 15mm thick on for fair faces of brick work or concrete sur-face cement plaster 1:4 & rendering is to be finished even and smooth (without using extra cement). Complete all as specified & directed. |
| 15 | Supply & fixing Cable jointing kit for 11 KV (Earthed ) grade cable for outdoor terminationheat shrinkable type complete with jointing material and accessories suitable for 3 core XLPE armoured alluminium conductor cableof size 120 to 185 Sq.mmmaterial & labour.Make: M seal/Raychem/Cabseal or equivalent. |
| 16 | S & F Lighting arrester expulsion type complete with all fittings, transmission class, discharge capacity 65 kilo amps, 11000 volts including material & labour.Make.:Pactil/Elpro/ABB/CG/Areva/Atlas or equivalent. |
| 17 | Danger Notice plate of 1.6 mm thick mild steel sheet vitreous enamelled white with letters,figures and conventional skull and bones in signal red colour and fixed with M.S.clamps, bolts and nuts of approved size for HT 25x20 cm size as per IS 2551 with material & labour. |
| 18 | Supply & fixingcross arm of MS channel bracings,supports,clamps and back plates fabricated from structural steel section including nuts & bolts, washers,welding,bending, cold or hot, drilling holes for bolts in any shape or size as indicated or directed & inclusive of one primer coat, one under coat & one finishing coat of paint with material & labour.Note:- Required for fixing of AB switch, L.A., clamping of GI pipe on pole etc. |
| 19 | Dismatling cross arm of MS channels or angle section etc complete and setting aside for reuse. |
| 20 | Dismantling insulator any type any size. |
| 21 | Dismantling of earth wire orcopper conductor, service feeder or distributor span. |
| 22 | S & L of XLPE insulated screened PVC bedded galvanized steel strip or wire armoured, electric power cable (Heavy duty) with aluminium conductor 11000 Volt grade size 185 Sq.mm 3 core including termination of both the ends with proper lugs withlabour. Make of cable: Unistar/Finolax/Havells/Sterlite/KEI/V-guard/Polycab or equivalent. Note:- cable should be joint free. |
| 23 | Supply & fixing Cable route marker of Cast Iron size 150mm x 100mm x 3mm thick, embosing 11000 volt, U/G HT cable & size, fixed with nuts & bolts on MS angle iron size 40mmx40mmx5 mm,length 1700 mm, burried 500mm in the groundwith cement concrete (1:3:6) of size (200mmx200mmx300mm) with material & labour. |
| 24 | Boring holes/ auguring not exceeding 150mm dia 1m deep for passing HT/LT under ground cable across the road/gantry. complete all as specified & directed. |
| 25 | Earthing complete (including excavation of soil) with GI plate electrode 600x600x6.0mm thick burried directly in ground (earth plate not less than 2.25m below ground level) with top edge of the plate not less than 1.5m below normal ground level and duly filled with alternate layer of char coal & salt from 150mm below the plate to 150mm above the plate (total 900mm thick) connected to GI earth strip size 25x4mm in GI protection pipe of size 40mm dia upto 7.5m long by means of nuts, bolts, washers, check nuts of GI steel, fitted with funnel complete all as per procedure and as shown in SSR electrical plate No. 3 connected to earth test point/earth bus (to be provided near incoming mains) all as specified and testing including RCCearth pit chamber duly cement plaster finished and RCC pit cover 1mX1mX150mm, PCC hard standing surrounding the earth pit chamber, location of the earth pit marked on the nearest wall to be written with paint (for distance & value of earth pit) with material and labour. Earth pit chamber will be made 0.5m above the ground level. |
| 26 | Dismantled/scrap copper conductor(CREDIT ITEM). |
| 27 | Dismantled/scrap ms Cross arms, ms channels, ms angles etc. (CREDIT ITEM). |
AI Tender Summary
Tender Timeline
Dec 13, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 28, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 29, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender