|
| 1 | Electrical cable \"ISI\" marked - control /power |
| 2 | Power cable, 70smm , 4 core, aluminium , PVC armoured, 1100 volts, ISI mark |
| 3 | control cable 1.5sqmm 24 core 1100 volts, ISI mark, Copper |
| 4 | Sensor cable 1.5sqmm , 4 core, screen cable, 24 volt DC, copper, ISI mark |
| 5 | Mist motor unit - horizotal centrifugal pump with min. 90 KW, 2 pole, IE2 class, class F insulation, copper winding induction motor of reputed make along with base frame, coupling , coupling guard and foundation boltssuitable for following condition head: min. 147.5 mtrs , discharge: min. 500 US GPM, starter :Fully automatic star delta starter with timer and relay suitable for the system , 415 volts , 50Hz water proofwith all safety features |
| 6 | MMIC (Microwave /millimeter wave monolithic integrated circuit) sequential timer based sensor actuated control system, components reputed make, consisting of switch fuse unit, aux contactor, transformer, power contactors, sequential timer, on delay timer, suitable to control 192 nos auto mist solenoid valve 110VAC in sequence. |
| 7 | Micro strainer (Body -GI, strainer stainless steel, ISI mark |
| 8 | Dense Mist rain gun 360 degree/30 mtr Dia., type -Impact, Pressure 7-10 kgf/cm2 |
| 9 | Auto mist valve/1.5N /(CF-8/SS-304) normally closed pilot operated diaphram type solenoid valve screwed end 40mm, operating voltage 110V AC |
| 10 | Pressure relief valve, 40mm dia, 6-12 kgf/cm2 adjustable control, brass make |
| 11 | Sensor set reputed make, 15-20 mtr range through beam type, 10- 30 volts DC |
| 12 | Mist discharge header unit 65mmx 2500 mtr. LengthGI medium class, ISI mark as per IS-1239, as per annexure-A & drawing-1 |
| 13 | Mist discharge header unit 100mmx 6000 mtr. LengthGI medium class, ISI mark as per IS-1239 |
| 14 | Mist discharge header unit 150mmx6000 mtr. LengthGI medium class, ISI mark as per IS-1239 |
| 15 | Spray riser support system with fittings with MS angle & anti climbing device (made of steel material)as per annexure-B & drawing-2 |
| 16 | Mild steel water tank 20000 Ltr capacity complete with top cover, painting and concrete base, as per annexure-C & drawing-3 |
| 17 | Pre- fabricated system room 2x5x2.6 mtr with PCC foudation made of CGI sheet , angle , channel, room should be water proof, PCC flooring, PCC foundation for pump motor set, control panel & starter, annexure-D & drawing-4 |
| 18 | Mist control valve 40mm ball valve/100 sluice valve/100mm NRV/150mm sluice valve. |
| 19 | Mist control ball valve 40mm size, PN20, SS/bronze |
| 20 | C.I sluice valve 100mm heavy duty, PN-20 |
| 21 | C.I non return valve 100mm, heavy dduty, PN-20 |
| 22 | C.I Sluice valve 150mm heavy duty, PN-20 |
| 23 | Pressure guage ISI marked, 0-12 bar, 4\" dia |
| 24 | Fabrication, installation, commissioning and testing including required misc. material & trial run of the system for 30 days(annexure-E) |
| 25 | AMC for operation and maintenace of the system for 730 days (ie., 2years) after trail run(1 skilled & 1 unskilled labour in each shift, for 03 shifts per day) |
| 26 | Total impact of GST for the purpose of CTC |
