|
| 1 | BASKET BALL COURT |
| 2 | Excavation work by mechanical means (Hydraulic excavator) / manual means in foundation trenches ordrains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming ofbottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soilsas directed, within a lead of 50 m.Ordinary rock (2.9.1) |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas(exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavatedearth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds ofsoil(2.6.1) |
| 4 | Providing and laying in position cement concrete of specified grade excluding the cost of centering andshuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40nominal size) (4.1.8) |
| 5 | Providing and laying in position specified grade of reinforced cement concrete, excluding the cost ofcentering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarsesand :3 graded stone aggregate 20 mm nominal size (5.1.2) |
| 6 | Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases ofcolumns, etc for mass concrete (5.9.1) |
| 7 | Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position andbinding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more (5.22.6) |
| 8 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., includingcutting, hoisting, fixing position and applying a priming coat of approved steel primer, including weldingand bolted with special shaped washers etc. complete.Hot finished welded type tubes (10.16.1) |
| 9 | Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer all complete.(10.1) |
| 10 | Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applyinga priming coat of approved steel primer, including welding and bolted with special shaped washers etc.complete (50.10.2) |
| 11 | Providing and fixing precoated galvanised iron profile sheets (size, shape andpitch of
corrugation as approved by Engineer-in-charge) 0.450 mm ( TATA Make ) (+0.05%), totalcoated thickness
with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7microns epoxy primer on
both side of the sheet and polyester top coat 15-18 microns. Sheet shouldhave protective guard film of 25
microns minimum to avoid scratches during transportation andshould be supplied in single length upto 12
metre or as desired by Engineer-in-charge. The sheetshall be fixed using self drilling/self tapping screws of
size (5.5x55mm) with EPDM seal, completeupto any pitch in horizontal/ vertical or curved surfaces,
excluding the cost of purlins, rafters andtrusses and including cutting to size and shape wherever required.
Details of cost for 216.14 sqm |
| 12 | Providing & fixing Poly carbonate corrugated sheet 0.8 mm thick as approved by the Engineer in chargeand should be supplied in a single length of 12 M or as decide by the Engineer in charge. The sheetsshall be fixed using self drilling / self tapping screw of size (5.5x55 mm) with EPDM seal complete uptoany pitch in horizontal/ vertical/ curved surface, but excluding the cost of purlins, rafters, trusses, andincluding cutting to size shapes where ever required.(50.12.2.1) |
| 13 | Providing and fixing Granite of any colour and shade for Name board of required size laid over base ofcement mortar 1:4 (1Cement and 4 coarse sand) including all charges etc. complete a all levels includinglettering and fixing (od179087/2022_2023) |
