Military Engineer Services-MES has published Tender For Repair/Replacement Of Gi/Ci Water Supply Distribution Pipe Line, Cleaning Of Rain Water Sump, Clear Water Sump And Bp Tanks And Other Connected Works At Yol Cantt. Submission Date for this Tender is 09-01-2023. Pipe Laying Tenders in Kangra Himachal Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 02-Jan-2023 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-01-2023 |
| Sl. No. | Item Description |
| 1 | SCHEDULE "A" PART-I :- Excavation in trenches n.exc 1.5 metre wide and n.exc 1.5 metre deep and getting out in any type of soil, all as specified. |
| 2 | Returning filling in including spreading leveling, watering and well ramming in layers n. exc 25cm, all as specified. |
| 3 | Removal of excavated material to be distance n.exc 50 metres and depositing where directed at a level n.exc 1.5m high from the starting point, all as specified. |
| 4 | Cutting of roads for laying of pipe of any type and size and making good roadby providing soling with broken boulders or quarried stone, WBM of existing thickness and finally topping with bituminous macadum of existing thickness (bituminous macadum comprising of stone chipping and cold emulsion as per manufacturer"s instructions) including necessary compaction by rolling etc.to match existing complete all as specified and directed. |
| 5 | Cleaning of surrounding area of water storage tanks/sump/ BP tanks hoisted on various buildings by cleaning mud, fungs plants and vegetation with steel brushes etc complete all as specified and directed. |
| 6 | Cleaning of uderground storage water tanks/ sump having dia 18 metres and depth 3 metres of capacity 2/1.5 lakhs gallons from inside taking out algee scale, dirt and gravel deposited at bottom of tank and to be disposed off to a distance not less than 15 metres from top circumference of tank including cleaning and removing sludge, algee from existing gallery of beds and removing moulds, fungus etc with water mixed with bleaching powder complete all as specified. |
| 7 | All as per Srl item No 6 above but of sizeof tank 25.70 metres x 45 metres and height 5.70 metres of capacity 9.24 lakhs gallon complete, all as specified. |
| 8 | All as per Srl item No 6 above but of size of tank 18.80 metres x 12.60 metres and height 2.90 metres with partition walls of capacity 75000 lakhs gallons including back wash tank and intake chambers complete, all as specified. |
| 9 | All as per Srl item No 6 above but set of 4 Nos of sedimentation tank of capacity 75,000 gallons complete, all as specified. |
| 10 | All as per Srl item No 6 above but semi underground main water reservior of capacity 20,00,000 gallons complete, all as specified. |
| 11 | Painting of Valve Pit cover, doors windows, including filtration bed wall with requisite colour marking good condition including preparing surface by cleaning, rubbing and making surface smooth for painting and applying one coat of synthetic enamel paint, complete all as specified and directed by Engr-in-Charge. |
| 12 | Painting the existing CI pipe 250/200/150/100/80mm dia with sluice valve including preparing surface by cleaning, rubbing and making the surface smooth for painting and applying one coat of synthetic enamel paint, complete all as specified Engr-in-Charge. |
| 13 | Supply only best quality bleaching powder grade "A" ISI marked for water treatment purppose complete all as specified and directed . Make:- DCM Shree Ram / Declibac Technologies / Shre Rayaseema or as approved by MES. |
| 14 | Supply only Best quality AQUA FIT(Calcium based granular disinfectant for water treatment, more stable than chlorine gas and stronger than bleaching powder) in 45Kg packing plastic drum. Make:- Declibac/Purichlor or equivlant in makes as approved by MES. |
| 15 | Plain cement concrete M-10, nominal mix, C-2, using 40mm graded mechanically crushed stone aggregate as support of main line from Ekko Khad intake point to main water reservoir including entire camp area complete all as specified Engr-in-Charge. |
| 16 | Taking up AC/GI/ cast iron water mains (including all fittings), with spigot and socket ends/ flanged ends and lead joints including burning out joints and recovering lead, including disconnecting pipes and fittings complete of size 150mm dia, all as specified. |
| 17 | Taking up AC/GI/ cast iron water mains (including all fittings), with spigot and socket ends/ flanged ends and lead joints including burning out joints and recovering lead, including disconnecting pipes and fittings complete of size 100mm dia, all as specified. |
| 18 | Taking up AC/ GI/ cast iron water mains (including all fittings), with spigot and socket ends/ flanged ends and lead joints including burning out joints and recovering lead, including disconnecting pipes and fittings complete of size 80mm dia, all as specified. |
| 19 | Taking up AC/ GI/ cast iron water mains (including all fittings), with spigot and socket ends/ flanged ends and lead joints including burning out joints and recovering lead, including disconnecting pipes and fittings complete of size 50mm dia, all as specified. |
| 20 | Taking up AC/ GI/ cast iron water mains (including all fittings), with spigot and socket ends/ flanged ends and lead joints including burning out joints and recovering lead, including disconnecting pipes and fittings complete of size 40mm dia, all as specified. |
| 21 | Mild steel galvanised iron water tubing 150mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. laid in trenches in old existing or new routes or under roads, complete, all as specified and directed. |
| 22 | Mild steel galvanised iron water tubing 100mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. laid in trenches in old existing or new routes or under roads, complete, all as specified and directed. |
| 23 | Mild steel galvanised iron water tubing 80mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. laid in trenches in old existing or new routes or under roads, complete, all as specified and directed. |
| 24 | Mild steel galvanised iron water tubing 50mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. laid in trenches in old existing or new routes or under roads, complete, all as specified and directed. |
| 25 | Mild steel galvanised iron water tubing 40mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. laid in trenches in old existing or new routes or under roads, complete, all as specified and directed. |
| 26 | Cast ironSluice valvefor water supply purpose with C.I. drilled flangedends (integrally cast), class PN-1.6 conforming to IS-780,ISI marked with stainless steelspindle andironwheel including jointing materialcomplete such asrubber insertion packing rings with adequate size and requisite numbers nut, bolt and washer complete of the of size 150mm bore, including taking out old valve, any type, all as specified. |
| 27 | Cast ironSluice valvefor water supply purpose with C.I. drilled flangedends (integrally cast), class PN-1.6 conforming to IS-780,ISI marked with stainless steelspindle andironwheel including jointing materialcomplete such asrubber insertion packing rings with adequate size and requisite numbers nut, bolt and washer complete of the of size 100mm bore,including taking out old valve , any type,all as specified. |
| 28 | Cast ironSluice valvefor water supply purpose with C.I. drilled flangedends (integrally cast), class PN-1.6 conforming to IS-780,ISI marked with stainless steelspindle andironwheel including jointing materialcomplete such asrubber insertion packing rings with adequate size and requisite numbers nut, bolt and washer complete of the of size 80mm bore,including taking out old valve , any type,all as specified. |
| 29 | Run lead joint to socket and spigot pipe and pipe fittings for 150 mm bore of pipe coming main line from Ekko khad to Yol cantt complete all as specified and directed by Engr-in-Charge. |
| 30 | Run lead joint to socket and spigot pipe and pipe fittings for 100 mm bore of pipe coming main line from Ekko khad to Yol cantt complete all as specified and directed by Engr-in-Charge. |
| 31 | Run lead joint to socket and spigot pipe and pipe fittings for 80 mm bore of pipecoming main line from Ekko khad to Yol cantt complete all as specified and directed by Engr-in-Charge. |
| 32 | Cast iron fittings for spigot and socketed pipe i.e. bends (any type radius and angle) tapers any type (straight, bend, increasing decreasing or double socket etc) all sockets or socker and spigot collars, caps and plugs up to 150mm dia all as specified. |
| 33 | Renewal joint with rubber or fibre board gasket for jointing flanged pipe and fittings of 150mm bore with nut, bolt & washers of appropriate size complete, all as specified. |
| 34 | Renewal joint with rubber or fibre board gasket for jointing flanged pipe and fittings of 100mm bore with nut, bolt & washers of appropriate size complete, all as specified. |
| 35 | Renewal joint with rubber or fibre board gasket for jointing flanged pipe and fittings of 80mm bore with nut, bolt & washers of appropriate size complete, all as specified. |
| 36 | Repacking stuffing box of sluice valve spindle including taking apart and reassembling ensuring no water leakage by providing new gaskets, gland dori, nuts & bolts etc for smooth functioning of valve of size 150mm, all as specified. |
| 37 | Repacking stuffing box of sluice valve spindle including taking apart and reassembling ensuring no water leakage by providing new gaskets, gland dori, nuts & bolts etc for smooth functioning of valve of size 100mm, all as specified. |
| 38 | Repacking stuffing box of sluice valve spindle including taking apart and reassembling ensuring no water leakage by providing new gaskets, gland dori, nuts & bolts etc for smooth functioning of valve of size 80mm, all as specified. |
| 39 | Brick masonry valve pit of size 120x120x120cms (internal dimension) with earth work in any type of soil, plain cement concrete M-10 type C-2 as in foundation, brick work in cement mortar 1:6 (01 cement : 06 coarse sand) 23cms thick, 15mm thick plaster in cement mortar 1:4 (01 cement : 04 coarse sand) internally and externally flush pointed in same mortar as the work proceeds flooring shall be 40mm thick in plain cement concrete M-15 (Nominal mix) laid over 75mm thick hard core top cover shall be made out of mild steel sheet 3.15mm thick fixed in angle iron frame made out of angle size 40x40x6mm with two number of hinges on one side and locking aggangement at other side with 50mm pad lock complete including painting with two coats of sythetic enamel pait over a coat of red oxide primer complete all as specified. |
| 40 | D-Shaped clamp, made out of 3mm thick MS Sheet, 2" wide, with rubberfibre board gasket complete fixed with nuts, bolts and washers of appropriate size to make the joint completely leak proof to to avoid leakage at various points, suitable for 150mm bore of pipe, complete all as specified. |
| 41 | D-Shaped clamp, made out of 3mm thick MS Sheet, 2" wide, with rubberfibre board gasket complete fixed with nuts, bolts and washers of appropriate size to make the joint completely leak proof to to avoid leakage at various points, suitable for 100mm bore of pipe, complete all as specified. |
| 42 | D-Shaped clamp, made out of 3mm thick MS Sheet, 2" wide, with rubberfibre board gasket complete fixed with nuts, bolts and washers of appropriate size to make the joint completely leak proof to to avoid leakage at various points, suitable for 80mm bore of pipe, complete all as specified. |
| 43 | D-Shaped clamp, made out of 3mm thick MS Sheet, 2" wide, with rubberfibre board gasket complete fixed with nuts, bolts and washers of appropriate size to make the joint completely leak proof to to avoid leakage at various points, suitable for 50mm bore of pipe, complete all as specified. |
| 44 | D-Shaped clamp, made out of 3mm thick MS Sheet, 2" wide, with rubberfibre board gasket complete fixed with nuts, bolts and washers of appropriate size to make the joint completely leak proof to to avoid leakage at various points, suitable for 40mm bore of pipe, complete all as specified. |
| 45 | Strainer suitable for 150mm bore of pipe (AC/CI) with 3mm thickness 30mm hole making on overall surface with 100mm pitch distance maintain from one hole to nother in any direction and length 1200mm, fixed in poistion, complete all as specified and directed. |
| 46 | Strainer suitable for 100mm bore of pipe (AC/CI) with 3mm thickness 30mm hole making on overall surface with 100mm pitch distance maintain from one hole to nother in any direction and length 1200mm, fixed in poistion, complete all as specified and directed. |
| 47 | Strainer suitable for 80mm bore of pipe (AC/CI)with 3mm thickness 30mm hole making on overall surface with 100mm pitch distance maintain from one hole to nother in any direction and length 1200mm, fixed in poistion, complete all as specified and directed. |
| 48 | Gun metal globe or gate valves (ISI-marked) with iron wheel head, screwed both ends for iron pipe 50mm bore and fixed, fixed in repair, all as specified. |
| 49 | Gun metal globe or gate valves (ISI-marked) with iron wheel head, screwed both ends for iron pipe 40mm bore and fixed, fixed in repair , all as specified. |
| 50 | 25mm bore stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions suitable complete, fixed in repair, all as specified. |
| 51 | 20mm bore,stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions suitable complete, fixed in repair all as specified. |
| 52 | 15mm bore,stop valve, cast copper alloy, screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions suitable complete, fixed in repair all as specified. |
| 53 | Taking up or down steel tubing & connections of size 25 mm dia and removing from site, all as specified. |
| 54 | Taking up or down steel tubing & connections of size 20 mm dia and removing from site, all as specified. |
| 55 | Taking up or down steel tubing & connections of size 15 mm dia and removing from site, all as specified. |
| 56 | Mild steel galvanised iron water tubing 25mm bore with screwed & socket joints, medium grade, galvanised, with all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. laid in trenches in old existing or new routes or under roads, complete, all as specified and directed. |
| 57 | Mild steel galvanized iron water tubing 20mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed. |
| 58 | Mild steel galvanized iron water tubing 15mm bore with screwed & socket joints, medium grade, in short lengths, with and including all fittings, such as sockets, bends, elbows, unions, tees, diminishing pieces etc. Fixed to wall or ceiling or laid in floor complete, all as specified and directed. |
| 59 | 15mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms), fixed in repair, all as specified. |
| 60 | 20mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 20mm-125gms), fixed in repair, all as specified. |
| 61 | Supply only alum crystal solid material best quality for water treatmet purpose, complete all as specified. |
| 62 | Supply only best quality nylon PVC 3mm dia with 30 RM of each roll for grass cutting thread for operation of bush cutter, complete all as specified. |
| 63 | Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work conforming to Fe.290.Gde-E-165, including two coats of synthetic enamel paint over a coat of primer, complete all as specified. |
| 64 | Plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment including necessary welding, complete all as specified. |
| 65 | Supply & fixed in repair Lead Ring of size 250 mm dia (6.10KG of each Ring) for water supply pipe line joint complete all as specified and as directed by Engr-in-charge. |
| 66 | Supply & fixed in repair Lead Ring of size 150 mm dia (3.40KG of each Ring) for water supply pipe line joint complete all as specified and as directed by Engr-in-charge. |
| 67 | Supply & fixed in repair Lead Ring of size 100 mm dia (2.20KG of each Ring) for water supply pipe line joint complete all as specified and as directed by Engr-in-charge. |
| 68 | Supply & fixed in repair Lead Ring of size 80 mm dia (1.80KG of each Ring) for water supply pipe line joint complete all as specified and as directed by Engr-in-charge. |
| 69 | Supply & fixed in repair Lead Wool for water supply pipe line joint complete all as specified and as directed by Engr-in-charge. |
| 70 | Supply & fixed in repair CI Coller of size 250 mm dia (55.0KG of each) for water supply pipe line joint complete all as specified and as directed by Engr-in-charge. |
| 71 | Supply & fixed in repair CI Collerof size 150 mm dia (28.0KG of each ) for water supply pipe line joint complete all as specified and as directed by Engr-in-charge. |
| 72 | Supply & fixed in repair CI Coller of size 100 mm dia (17.0KG of eash) for water supply pipe line joint complete all as specified and as directed by Engr-in-charge. |
| 73 | Supply & fixed in repair CI Coller of size 80 mm dia (14.0KG of each) for water supply pipe line joint complete all as specified and as directed by Engr-in-charge. |
| 74 | Supply & fixed mild Steel Bolt, Nuts & Washers (Bolt size 100mm length, 10mm dia with suitable size of Nuts & 2-Nos Washers, Weight of each set = 0.129KG) complete all as specified and as directed by Engr-in-charge. |
| 75 | Supply & fixed mild Steel Bolt, Nuts & Washers ( Bolt size 100mm length, 12mm dia with suitable size of Nuts & 2-Nos Washers, Weight of each set = 0.247KG) complete all as specified and as directed by Engr-in-charge. |
| 76 | Supply & fixed mild Steel Bolt, Nuts & Washers ( Bolt size 100mm length, 16mm dia with suitable size of Nuts & 2-Nos Washers, Weight of each set = 0.409KG) complete all as specified and as directed by Engr-in-charge. |
| 77 | Supply & fixed mild Steel Bolt, Nuts & Washers ( Bolt size 100mm length, 20mm dia with suitable size of Nuts & 2-Nos Washers, Weight of each set = 0.897KG) complete all as specified and as directed by Engr-in-charge. |
| 78 | Supply & fixed mild Steel flanged joint with coller (02 Nos) including internal threading of size 80 mm dia, six holes with including suitable size of Bolt, Nuts, washer and Gaskits (01 Set complete) suitable for jointing of water supply pipe line complete all as specified and as directed by Engr-in-charge. |
| 79 | Supply & fixed mild Steel flanged joint with coller (02 Nos) including internal threading of size 100 mm dia, six holes with including suitable size of Bolt, Nuts, washer and Gaskits (01 Set complete) suitable for jointing of water supply pipe line complete all as specified and as directed by Engr-in-charge. |
| 80 | Supply & fixed mild Steel flanged joint with coller (02 Nos) including internal threading of size 150 mm dia, six holes with including suitable size of Bolt, Nuts, washer and Gaskits (01 Set complete) suitable for jointing of water supply pipe line complete all as specified and as directed by Engr-in-charge. |
| 81 | Water testing report provide through IPH Lab at Dharamsala for raw water collection from Main Reservior-01 sample, drinkable water collection from 02 different location in Cantt area for one time (sample collection 01-Raw water, 2nd - drinkable water, 3rd -drinkable water (01 Glass Jar IPH officeand next in plastic bottle 01 ltrs) and send for Physical, Chemical and bactiological test through own arrangement and provide water testing report from IPH and submitted to Garrison Engineer office. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
