|
| 1 | Dismentaling tiles floor including stacking of dismetaled materials as directed by Engineer in charge with a distance of 60 mtrs (200 ft)Sl 698. |
| 2 | S/F of 100 mm HEP make H.C.I. pip heavy quality with all fittings such as coller socket, rose head,bend etc complete with all labour and material. |
| 3 | P/FG.I.Pipes complete with G.I.fittings and clamps i/c making good the walls etc.cancealed pipe .15 mm dia nominal bore.18.11.1. |
| 4 | P/F white vitreous china pedestal type water closet (Casket type W.C pan) |
| 5 | P/F white vitreous china water closet squatting pan(Indian type) orrisa pattern W.C. pan of size 580x440 mm.17.13.2. |
| 6 | Providing and laying rectified Glazed ceramic floor tiles of size 300x300 mm or more (thickness to be specified by the manufacturer) of 1st quality conforming to IS: 15622 of approved make in colours White, lovry GreyFume Red Brown laid on 20 mm thick cement mortar 1:4 (1 cement :4 Coarse sand) jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc complete. 11.39 |
| 7 | Providing and fixing 1st quality ceramic, glazed wall tiles conforming to IS 15622 (thickness to be specified by the manufacturer) of approved make in all colours, shades except burgundy, bottle green black of any size as approved by Engineer-in-charge, in skirting, risers of steps and dados, over 12 mm thck bed of cmeent mortar 1:3 ( 1 cement 3 coarse sand) and jointing with grey cmeent slurry @ 3.3 kg per sqm, including pointign in white cement mixed with pigment of matching shade complete. 8.31 |
| 8 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet 100 mm diameter.18.22.1. |
| 9 | Providing and fixing C.P. brass long nose bib cock of approved quality confirming to IS standard and weighting npt less than 810 gms.15 mm nominal bore.18.50.1. |
| 10 | P/F C.P. brass Angle Valvefor basin mixture and geyser points ofapproved quality confirming to IS:8931.15 mm nominal bore.18.53.1. |
| 11 | Providing and fixing 600x450 mm bevelled edge mirror of superior glass of approved quality complete with 6 mm thickhard board groung fixed to wooden cleats with C.P. brass screws and washers complete.17.31 |
| 12 | P/F Wash Basin with C.I.brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern white vitrous china wash basin size 630x450 mm with a pair of 15 mm cp brass piller taps.17.7.1. |
| 13 | P/F stainless steel A ISI 304(18/8) kitchen sink with C.I. brackets and stainless steel plug 40 mm .kitchen sink with drain board .510x 1040 mm depth 250 mm.17.10.1.1. |
| 14 | Structual Steel work riveted bolted or welded in built up section, trusses, Builds up gates,framed work lncluding cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. Sl.N0-10.2, (Rs-75) |
| 15 | Providing and fixing ISI marked 35 mm thick flush door Shutters Conforming to IS : 2202 (Part I)non decorative type core of block board construction with frame lst class hard wood and well matched commercial 3 ply Veneening with vertical graints or cross brand and face veneers on both faces of shutters. DAR N0-9.21.1 |
| 16 | Providing and Fixing of aluminium work for doors, window, Ventilators and Partitions with extruded built up standard tubular sections appropriate Z sections and other sections of approved make conforming to IS:733 and ISl;1285, Fixing with dash fasteners of required dia and size, including necessary filling up the gape at junctions, i.e. at top, bottom and sides with required EPDM rubber/neorapan gascket etc. aluminium section shall be smooth rust free straight mistred and jointed machanically whrever required including clear angle, aluminium snap beading for glazing/Paneling, C.P. Brass/Stainless Steel Screws, all complete as per architectural Drawing and the directions of Engineer-in-charge. (Glazing, Paneling and dash fasteners to be Paid for Separately) (For Fixed Portion) Power coated Aluminium (minimum thickness of power Coating 50 micron) DAR-21.1.2.2, (Rs-309) |
| 17 | Providing and Fixing of glazing in Aluminium door/ window, Ventilator shutter and Partitions etc. with EPDM Rubber/ neoprene gasket etc. complete as per the architectural drawings and the direction of Engineer-in-Charge. (Cost of aluminium Snap beading shall be paid in basic item). with Float glass panes of 5 mm thickness. (weight not less than 12.50 kg/sqm) DAR-21.3.2,(Rs-903) |
| 18 | Providing And Fixing Float Glass Panes 6.00 mm thick Glass Panes, (DAR-9.7.7.2) Rs-1452/- |
| 19 | Providing and fixing S.S. pipe curtain rods with S.S brackets and other fittings 20 mm dia (heavy type). |
| 20 | Providing and fixing18 mm thick gang saw cut mirror polished premoulded and prepolished matchine cut for kitchen plateform laid over 20 mm thick base of cement mortar 1:4(1 cement :4 coarse sand)complete.Granite of any colour and shade. Area of slab over 0.50 sqm.8.2.2.2. |
