Tender For Construction Of Anganwadi Building At Manaloor Village And Panchayat
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Dec 2022
0 days left
EMD
27140
Bank guarantee accepted
Document Fee
27140
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
sankarankovil → Tamil Nadu
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Construction Of Anganwadi Building At Manaloor Village And Panchayat
BOQ
| Sl. No. | Item Description |
| 1 | CONSTRUCTION OF ANGANWADI BUILDING AT MANALOOR VILLAGE AND PANCHAYAT - SANKARANKOVIL BLOCK -AGAMT 2022 - 2023 |
| 2 | Earth work excavation and depositing on bank with in initial lead of 10 m and initial lift of 2m in hard stiff clay, stiff black cotton soil, hard red earth,earth mixed with small sized boulders and hard gravelly soil as per SS 20B |
| 3 | Collection and supply of sandand filling in to the basement including cost and conveyanceto the siteand all labour charges for filling as per standard specifications |
| 4 | Cement concrete 1:4:8 mix using 40mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing,laying and curing etc complete |
| 5 | Reinforced Cement concrete 1:1.5:3 using 20mm ISS HBG metal for all RCC item of works excluding cost of Rein forcement and fabricating charges, centering and shuttering but including curing and providing fixtures like fan clamps in the RCC floor or roof slabs wherever necessary and bearing surfaces of walls , sides and bottom of the slabs, beams etc.,as directed by the departmental officers complete complying with standard specifications. |
| 6 | Below basement |
| 7 | Super Structure |
| 8 | Brick work in CM 1:5 mix using country bricks ground moulded of size 83/4\"x41/4\"x21/4\" for the following including curing etc., complete complying with standard specifications. Rate for 10m3 |
| 9 | Below basement |
| 10 | Super Structure |
| 11 | Supplying and fabrication of steel including cost and conveyance of bending to shape and tying in position and forming grills for all R.C.C works including cost and conveyance of all materials to site and all labour charges for mixing, laying, and curing |
| 12 | Supplying and erecting centeringshuttering includingnecessary supportsforplane etc., complete. |
| 13 | Grade Beam |
| 14 | For Roof slab, lintel, beam |
| 15 | ForSunshade & Column |
| 16 | Floor finish with granolithic flooring in CC 1:2:4 mix using 10 to 12mm chips including cost and conveyance of all materials and labours etc., complete |
| 17 | Paving the Floor with scratch proof Colour design ceromic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete |
| 18 | Paving the floor with pre-polished concrete anti-skid tiles (Required shape and design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three Sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. |
| 19 | Dadooing walls with Glazed tiles of any colour and any size laid in CM 1:2, 10mm thick. and pointing with white cement 0.4 Kg per sqm mixed with colouring pigment to siut the colour of the tiles including finishing the joints neatly complying with the standard specifications and as directed by the departmental officers. The Glazed tiles should be got approved from the Departmental officers before execution. |
| 20 | Refilling the basement with excavated earthother than sandcomplying the Standard specification |
| 21 | Brick jelly lime concrete using 20mm brick jelly with slacked lime in the ratio of 32:12.5 including cost andconveyance of all materials to site and all labour charges for mixing , laying ,and finishing etc complete. |
| 22 | Finishing the top of Roof with one course of Pressed Tiles of size 23cm x 23cm x 2 cm laid in Cement mortar 1:3 mix, 12 mm thick mixed with water proofing compound etc., complete |
| 23 | Plastering with cement mortar 1:5 mixto12mmthick including cost and conveyance of all materials to site and all labour charges etc |
| 24 | Plastering with cement mortar 1:3 mixto 10 mm thick including cost and conveyance of all materials to site and all labour charges etc complete |
| 25 | Distembering two coats with best approved distemberincluding cost and conveyance of all materials to site and all labour charges etc complete |
| 26 | Exterior Emulsion painting two coats with best approved quality and colourpaint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete. |
| 27 | Supplyingof steel doors, windows, ventilators etc., withbest approved best qualityetc., complete complying with standard specifications and as directed by the departmental officers. |
| 28 | Doors D1(0.90x2.10)m |
| 29 | Doors D(0.75x2.10)m |
| 30 | Doors D2(1.10x2.10)m |
| 31 | Window W(1.20x1.30)m |
| 32 | Ventilator V (0.90 x 0.45m) |
| 33 | Rcc Jolly 0.60 x 0.45 m |
| 34 | Painting two coats over new iron works using ready mixed enamel paint including cost and conveyance of paint and all labour charges etc complete |
| 35 | Labour Charges for Fixing the Doors inculding all Charges etc.. |
| 36 | Labour Charges for Fixing theSteel Window inculding all Charges etc.. |
| 37 | Supplying & fixingwith cuddapah slabs 20-30mm thick for cup board including all cost and conveyance and all labour charges etc .compl. |
| 38 | Cost and supply of Oriya type Indian baby friendly water closetwith \"P\" or \"S\" trap etc., complete. ( White ) |
| 39 | Cost and supply of European water closetwith \"P\" or \"S\" trap with double flapped seat and seat cover with bran hinges and 10 litre capacity PVC low level flushing tank with all internal fittings etc., complete. ( White ) |
| 40 | Supplying and fixingP.V.C rainwater down fall pipe of 110mm diawith necessary shoes, bends,& clamps etc., |
| 41 | Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutor cable of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wallwith3 mm thick Hylum sheet cover withTW boxAnd 5 A FT switch with continuous earth connection of 14 SWG TC wire for making good ofthe concealed portion with suitable colour for PVC Open Light point / fan point (For electronic Regulator) SD 18 |
| 42 | Wiring with 2 X 1.5 Sq.mm (22 / 0.3) PVC insulated SC unsheathed Copper conducutorof 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories inflush with wallwith150 mm X 100 mm X 113 mm TW switch boxwith3 mm thick Hylum sheet cover for 5 A 3 pin non interlocking CS plugwith continuous earth wire connection of 14 SWG TC wire for making good ofthe concealed portion with suitable colour forconcealed PVCplugpointSD 36 |
| 43 | Supply and run of 2 of 1.50 sq.mm (22/0.30) PVC insulated SC unsheathed copper Conductor of1100 V grade on 7/20GI bearer wire for service connection mains SD 64 |
| 44 | Supply and run of 2 X 1.5 sq.mm(22 / 0.30) PVC insulated SC unsheathed copper Conductor of1100 V grade in 25 mm dia GI pipe( Class \" B \" ) suitably bent at both ends with necessary angle iron upright and end supports for mains. SD 69 |
| 45 | Supply and fixing of WT bulk head fitting with guard ( Philips / Bajaj / Crompton / K Lite ) suitable for incandescent lamp with 60 W bulb.SD 84 |
| 46 | Supply and fixing of CFL bulb SD 80 |
| 47 | Supply and fixing of single box type 4\"40 W flu fitting complete with copper choke and condensor with conduit pipe suspension from the ceiling with PVC unsheathed copper leads from terminals tot he fitting with tube SD88 |
| 48 | Supply and fixing of 1200 mm ( 48\") AC ceiling fan complete with stepped electronic 300 W regulator with 300 mmdown rod on the existing clamp. SD 110 |
| 49 | Supply and fixing of 16 Amps DPIC Switch of 500 V with fuse and neutral (Side Handle) on suitable TW box PWD EarthingSD 142 |
| 50 | Supply and fixing of TNEB Meter boardSD 125 |
| 51 | Supply and Delivery of 25mm UPVC Pipe10 KSC |
| 52 | Supply and delivery and fixing of 500lit. HDPE Tank as per IS 12701/1996 including loading, unloding, transportation and labour charges for fixing of the G I Pipes and specialsetc., complete. |
| 53 | supply and delivery of 25 mm GM Gate valve etc., complete. |
| 54 | supply and delivery of brass nalli etc., complete. |
| 55 | GST Amount for providing Service to Government Contract Works for the above RENEWALWorks. { GST Amount is the Total GST Amount for overall quoted amountabove this row in column \"BB\" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD) |
AI Tender Summary
Tender Timeline
Dec 12, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 17, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 17, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender