Tender For Periodical Services To Buildings Of Md Accn At Hpp Dunn Marg Area Of Age Br Ii Under Ge Mis Mhow
Tender Value
30 Lakhs
Estimated cost
Bid Submission
07 Jan 2023
0 days left
EMD
60000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
Indore → Madhya Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Periodical Services To Buildings Of Md Accn At Hpp Dunn Marg Area Of Age Br Ii Under Ge Mis Mhow
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 31-Dec-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 07-Jan-2023 |
BOQ
| Sl. No. | Item Description |
| 1 | M&L for complete removal of existing treatment fromwall /roof projections including facia, cornices etc by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etc by skilled labour complete all as specified and directed. |
| 2 | M&L for providing and applying wall care putty(minimum 2mm thick )over prepared surface ofany decription and finishthe surface even and smooth for painting. |
| 3 | M&L for priming plastered and other wallsurfaces with alkali resistant priming paintNote: Application of primer shall be carried out through air less sprayingMachine ( By using Mechanical method) |
| 4 | M&L for priming plastered and other wallsurfaces with alkali resistant priming paint .Note: Application of primer shall be carried out throughroller |
| 5 | M&L for applying twocosts of 100% Premium arcylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance , dirt resistance exterior paint of required shade (Company Depot Tinted ) with silicon additives @ 1.43 litre / 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm Note- Application ofEmulsion shall be carried out through air less spray machine (Mechanical means) |
| 6 | M&L for applying twocosts of 100% Premium arcylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance , dirt resistance exterior paint of required shade (Company Depot Tinted ) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm |
| 7 | M&L for complete removalof existing treatment on old decorated surface of wall and applying two coats of oil emulsion distemper white/coloured over acoat of birla wall carebased putty(ifrequired at site )all as specified and directed by Engineer-in-Charge. Note:-Putty shall be measured and paid seperately under relevant item. |
| 8 | M&L for preparation of old decorated surfaces of wall including brooming, washing, roubbing scraping down smoke spot, moss, efflorescent salts, trading oil, grasy spotsand stopping nails marks and applyingone coat of oil emulsion distemper all as specified and directed. |
| 9 | M&L for preparation old treated surface of wall and applying two coats of cement base paintcomplete all as specified and directed. |
| 10 | M&L for preparation of old surfaces of wall and applying two coats of white washcomplete all as specified and directed. |
| 11 | M&L for preparation of old treated surfaces of ceiling and applying two coatsof white wash complete all as specified and directed. |
| 12 | M&L for preparation of old treated steel surfaces of any description exceeding 10cm in width or girth and applying one coat of synthectic enamel paint complete all as specified and directed. |
| 13 | M&L for preparation of old treated wood or woodbased surface of any description exceeding 10cm in width or girth and applying one coat of synthectic enamel paint complete all as specified and directed. |
| 14 | M&L for taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key scrubbing down with water etc and rendering 15 mm thick in two layers each of 10mm and 5mmthick in CM 1:4 mixed with PD Proof 101 LW (+) of Dr fixit or otherequivalant integral water proofing admixture @ 200ml / bag and applyingtwo coats of super latex 302 of Dr fixit or otherequivalant in the ratio (1:4:7) , ( one part super latex, 4 part water and 7 parts of cement) @ 1.50kg of homogenious mixture/sqm in two coats and finish the surface even and smooth (without using extra cement) for external wall complete all as specificed and directed.Note :- WPC PD Proof and super latexshall be measured and paid separately under relevant item. |
| 15 | M&L for taking down cement plaster on brick or concrete surfaces including racking out joints hacking for key scrubbing down with water etc and rendering 15 mm thick in CM 1:6 mixed with PD Proof 101 LW (+) of Dr fixit or other equivalant integral water proofing admixture @ 200ml / bag and applyingtwo coats of super latex 302 of Dr fixit or other equivalant in the ratio (1:4:7) , ( one part super latex, 4 part water and 7 parts of cement) @ 1.50kg of homogenious mixture/sqm in two coats and finish the surface even and smooth (without using extra cement) for internal wall complete all as specificed and directed.Note :- WPC PD Proof and super latex shall be measured and paid separately under relevant item. |
| 16 | Supply only Liquid water proofing compound (Pidi proof 101 LW(+) |
| 17 | Supply only Integral water proofing compound(super latex 302) |
| 18 | M&L for removal of plants /trees of girth not exceeing30 cm from roof /sides ofexternal walls of buildings , chajjas, wall junctions, junctions of rain water/ CI soil /waste pipe junction including taking out the roots entered in wall /slab surfaces and making good the disturbed surface withPCC (1:2:4) type B0 or cement mortar (1:2) including making goodGI / CI /PVCpipe joints if damaged during tree cuttingprocess to match with the existing and alsofinishing the distrurbedsurfaceto match with existing finishes including necessary scaffolding /staging upto a height of 15.00 m from the ground level complete all as specified as directed by Engineer-in-Charge .Note : (i) If any CI/AC/PVC pipes or pipe fitting damage during the process of work shall be replaced with ew one without any extra cost of the department andthe decision of the GE on this regard shall be final and binding.(ii) The debris including vegetation plant / trees shall be disposed off to a distance exc 0.5 Km and n.exc 1.00 Kmall as directed by Engineer-in- charge.(iii) For deciding the girth of the plan t/ tree the height shall be measuredat 30 cm above the slab / wall.(iv) The labour employed by the contractor for carrying out the work shall be provided with safety equipment and quoted shall be deemed to be inclusive of the same. |
| 19 | M&L for taking down cement plaster of ceiling including racking out joints hacking for key scrubbing down with water etc and rendering 5 mm thick in CM 1:3 and finish the surface even and smooth (without using extra cement) |
| 20 | M&L for preparation of newly plastered surfaces ofCeiling,chajja and applying three coats of white washall as specified |
| 21 | Taking down loose and damaged concrete/cement plaster from column,beams,chajja and soffits of roof projection including exposed surface ofreinforcement and removal rust from old reinforcement by rubbing with wire brush or emery paper all as specified |
| 22 | M&L for applyingone coat ofDr Fixit rust remover (rust removing chemical) or Defroster or other equivalent chemical as approved to old rusted reinforcementbars/section after necessary preparation of surface by brush application complete all as specified and as directed by Engineer-in-Charge. |
| 23 | M&L for priming the old /new steel reinforcement bars / section with one coat of Fosroc\"Nitozinc primer or Dr Fixit Epoxy zinc primer or other equivalent as approved by brush application complete all as directed by Engineer-in-charge. |
| 24 | M&L for bonding the entire exposed surface with one coat of Fosroc Nitbond SBR or other equivalent chemical as approved as per Manufacture instruction complete all as specified and as directed by Engineer-in- charge. |
| 25 | S & F Mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including crancking, bendingspirally for hooping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.90 mm dia or securing with clips complete as directed and specified. |
| 26 | S&F welded steel wire fabric not exc 4 kg /sqm complete all as specified and as directed by Engineer-in-Charge. |
| 27 | M&L forfilling of cracks on wall surfaces by cutting V-groove in crack width upto 10 mm and fillingwith approved crack filler and make surface even and smooth complete all as specified and directed. |
AI Tender Summary
Tender Timeline
Dec 31, 2022
11:30 IST
Tender Published
Tender notice published.
Completed
Jan 07, 2023
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJan 07, 2023
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJan 09, 2023
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender