Tender For Purchase Of Furniture Items For Eoc Building. Leh, Leh-Jammu And Kashmir

Purchase Of Furniture Items For Eoc Building. Leh , Conference Table 12 Seater 3600 X 1500 X 740 Work Top--Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping.Soft Closing Dual Access Flap Provided For Access To Power Supply And Data Cables.Understructure-The Under-Structure Consists Of Mixture Of 25Mm And 18Mm Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Anodised Aluminium Alloy 63400 - Wp Profile Is Added At Bottom Edges For Improving The Aesthetics. The Product Has A Knock-Down Construction.Wire Management-A Wire Raiser Made Of 0.8Mm Crca Ms Is:513. It Is Epoxy Polyester Powder Coated ( Dft 40-60 Microns ) For Flow Of Wires And Cables. A Power Box With 2 Cutouts On Either Sides For Standard 8 Module Anchor Roma Is Provided. Beside Each Cutout, An Additional Cutout With Plate Is Provided For Mounting Audio Visual Cables ( Eg. Hdmi, Vga-A, Etc ) . The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Mingle10 Seater Mem Offiering With Tobacco Ash. ) ( Approved Brand Highquality ) , Officers Mesh Back Chair With Headrestseat / Back Assembly:The Cushioned Seat Assembly Consshould Be Ts Of Seat Outer ( Material-30% Glass Fiber Nylon ) & Upholstered Seat Inner ( Material- Poly Propylene ) With Moulded Polyurethane Foam & Polyster Fabric. The Netback Should Bemade Up Of Back Outer ( Material-Glass Fiber Filled Nylon ) & Back Inner ( Material- Pp ) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Full Back Size: 46.5 Cm. ( W ) X 60.0 Cm. ( H ) Seat Size : 51.0 Cm. ( W ) X 49.0 Cm. ( D ) High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density = 45 + / - 2 Kg / M³ And Hardness Load 12 + / - 2 Kgffor 25% Compression. Back Spine: The Support Spine Should Bemade Up Of High Pressure Die Cast Polished Hed Aluminum. Armrests : The Armrest Should Behaving Two Adjustment, Height ( 6.0±0.5Cm ) And Depth ( 6.0±0.5Cm ) . Height Adjustment Should Beprovided In Aluminum Structure Of Armrest Which Should Beconnected To Aluminum Back Spine And Should Beoperated By Button. The Depth Adjustment Should Beprovided In Pad Which Should Befixed To Armrest Structure. Armrest Top Should Bemade Up Of Pu Molded Over Plastic Inner. Active Bio-Synchro Mechanism: The Adjustable Tilting Mechanism Should Bedesigned With The Following Features: • 360° Revolving Type • Front-Pivot For Tilt With Feet Resting On Ground & Continuous Lumber Support Ensuring More Comfort • Tilt Tension Adjustment Can Be Operated In Seating Position • 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair • Seat / Back Tilting Ratio Of 1:2 • The Mechanism Housing Should Bemade Up Of Hpdc Aluminum & Black Powder Coated ( Dft 40 To 60 Micron ) Seat Depth Adjustment: Seat Depth Adjustment Should Beintegrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Beof 3.75±0.1 Cmlumbar Support Assembly: The Lumbar Support Assembly Should Consistof Lumbar Spine ( Material-Glass Fiber Filled Nylon ) Which Should Befixed Toaluminum Back Spine. The Lumbar Pad ( Material- Poly Propylene ) Should Befixed To Lumbar Spine Through Lumbar Pad Support. Lumbar Support Assembly Has Height Adjustment Of 5.0±0.5Cmpneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0 ± 0.3Cm. Pedestal Assembly With Castors:The Pedestal Should Behigh Pressure Die Cast Polishedaluminum And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be65.0 ± 0.5Cm. Pitch-Center Dia. ( 75.0 ± 1.0Cm. With Castors. ) Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Pp Having 6.0± 0.1Cm Wheel Diameter.The Neckrest Assembly Consshould Be Ts Of Upholstered Neckrest Inner ( Material-Polypropylene ) With Moulded Polyurethane Foam And Polyster Fabric.Upholstered Inner Should Befixed To Neckrest Cover.Neckrest Should Befixed To Back Assembly Through Neckrest Spine .Neckrest Assembly Has Height Adjustment Of 5.5 + / - 0.5Cm And Rotation Adjustment Of Overall 20° + / - 2°. Overall Dimensions Of Chair Seat Height - Min 45.5 To Max 55.5Cm.Height - Min 95.5 To Max 105.5 Cm. Width & Depth Of Chair As Measured From Pedestal - Width-75.0 Cm And Depth-75.0 Cm. The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Acefull Back With Headrest ) ( Approved Brand Highquality ) , Officers Chairseat / Back Assembly:The Cushioned Seat Assembly Consshould Be Ts Of Seat Outer ( Material-30% Glass Fiber Nylon ) & Upholstered Seat Inner ( Material- Poly Propylene ) With Moulded Polyurethane Foam & Polyster Fabric. The Netback Should Bemade Up Of Back Outer ( Material-Glass Fiber Filled Nylon ) & Back Inner ( Material- Pp ) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Full Back Size: 46.5 Cm. ( W ) X 60.0 Cm. ( H ) Seat Size : 51.0 Cm. ( W ) X 49.0 Cm. ( D ) High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density = 45 + / - 2 Kg / M³ And Hardness Load 12 + / - 2 Kgffor 25% Compression. Back Spine: The Support Spine Should Bemade Up Of High Pressure Die Cast Polished Hed Aluminum. Armrests : The Armrest Should Behaving Two Adjustment, Height ( 6.0±0.5Cm ) And Depth ( 6.0±0.5Cm ) . Height Adjustment Should Beprovided In Aluminum Structure Of Armrest Which Should Beconnected To Aluminum Back Spine And Should Beoperated By Button. The Depth Adjustment Should Beprovided In Pad Which Should Befixed To Armrest Structure. Armrest Top Should Bemade Up Of Pu Molded Over Plastic Inner. Active Bio-Synchro Mechanism: The Adjustable Tilting Mechanism Should Bedesigned With The Following Features: • 360° Revolving Type • Front-Pivot For Tilt With Feet Resting On Ground & Continuous Lumber Support Ensuring More Comfort • Tilt Tension Adjustment Can Be Operated In Seating Position • 5 Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair • Seat / Back Tilting Ratio Of 1:2 • The Mechanism Housing Should Bemade Up Of Hpdc Aluminum & Black Powder Coated ( Dft 40 To 60 Micron ) Seat Depth Adjustment: Seat Depth Adjustment Should Beintegrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Beof 3.75±0.1 Cmlumbar Support Assembly: The Lumbar Support Assembly Should Consistof Lumbar Spine ( Material-Glass Fiber Filled Nylon ) Which Should Befixed Toaluminum Back Spine. The Lumbar Pad ( Material- Poly Propylene ) Should Befixed To Lumbar Spine Through Lumbar Pad Support. Lumbar Support Assembly Has Height Adjustment Of 5.0±0.5Cmpneumatic Height Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0 ± 0.3Cm. Pedestal Assembly With Castors:The Pedestal Should Behigh Pressure Die Cast Polishedaluminum And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be65.0 ± 0.5Cm. Pitch-Center Dia. ( 75.0 ± 1.0Cm. With Castors. ) Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Moulded In Black Pp Having 6.0± 0.1Cm Wheel Diameter. Overall Dimensions Of Chair Seat Height - Min 45.5 To Max 55.5Cm. Height - Min 95.5 To Max 105.5 Cm. Width & Depth Of Chair As Measured From Pedestal - Width-75.0 Cm And Depth-75.0 Cm. The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Kareena High Back ) ( Approved Brand Highquality ) , Officers Visitor Chair 1. Seat / Back Assembly:The Cushioned Seat Assembly Consshould Be Ts Of Seat Outer ( Material-30% Glass Fiber Nylon ) & Upholstered Seat Inner ( Material- Poly Propylene ) With Moulded Polyurethane Foam & Polyster Fabric. The Netback Should Bemade Up Of Back Outer ( Material-Glass Fiber Filled Nylon ) & Back Inner ( Material- Pp ) And Upholstered Using Polyester Mesh Fabric With High Tenacity Yarn. Full Back Size: 46.5 Cm. ( W ) X 60.0 Cm. ( H ) Seat Size : 51.0 Cm. ( W ) X 49.0 Cm. ( D ) 2. High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Should Bemoulded With Density = 45 + / - 2 Kg / M³ And Hardness Load 12 + / - 2 Kgffor 25% Compression. 3. Back Spine: The Support Spine Should Bemade Up Of High Pressure Die Cast Polished Hed Aluminum. 4. Lumbar Support Assembly: The Lumbar Support Assembly Should Consist Of Lumbar Spine ( Material-Glass Fiber Filled Nylon ) Which Should Befixed Toaluminum Back Spine. The Lumbar Pad ( Material- Poly Propylene ) Should Befixed To Lumbar Spine Through Lumbar Pad Support. Lumbar Support Assembly Has Height Adjustmentof 5.0±0.5Cm5. Tubular Frame ( 3012Ax ) : The Powder Coated ( Dft 40-60 Micron ) Tubular Frame Should Becantilever Type & Made Of Ø2.54±0.03 Cm X 0.2±0.016 Cm Thk Ms Erw Tube. Overall Dimensions Of Chair Seat Height - 48.5Cm. Height - 99.5Cm. Width-65.5 Cm And Depth-58.2 Cm. The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Ace Visitor ) ( Approved Brand Highquality ) , Training Room Chairs1 ) Seat / Back: The Seat Sub-Assembly Should Bemade Up Of 1.2±0.1Cm Thk Plywood Upholstered With Moulded Foam And Polyester Fabric And Covered With An Injection-Moulded Polypropylene Outer Cover. The Seat Can Tip-Up When Not In Use And Thshould Befeature Can Be Used While Stacking The Chairs Horizontally The Back Sub-Assembly Should Bemade Up Of Injection-Moulded Polypropylene Inner Upholstered With Moulded Foam And Polyester Fabric And Covered With An Injection-Moulded Polypropylene Outer Cover. The Contoured Back With Width Extension At The Bottom Should Be A Should Bedesigned To Give Comfort To Lower Back. The Back Flexing Features Allows The Back To Tilt By 9C±2 To Aid The User In Adopting A Comfortable Reclining Posture. Both These Sub-Assemblies Should Befixed To The Tubular Structure, Back Size: 45.2Cm ( W ) X 44.6Cm ( I-I ) Seat Size: 47.0Cm ( W ) X 50.0Cm ( D ) 2 ) Tubular Frame Structure: The Powder-Coated 4 Leg Structure Should Bemade Of 2.2 ±0.03Cm Dia X 0.25 ±0.02Cm Thk M.S. E.R.W. Tube Front And Rear Leg Welded Along With Connecting Tube Made Of 1.9 ±-0.02Cm Dia X 0.2 ±0.016Cm Thk M.S. E.R.W. Tube To Form The Tubular Frame Assembly. The Legs Should Beprovided With Injection-Moulded Adopter Bush In Black Nylon And Brake-Loaded Castors Enabling Easy Maneuvering While Not In Use And Stable Sitting While In Use_ The Chairs Can Be Stacked Horizontally When Not In Use_ 3 ) Polyurethane Foam: The Polyurethane Foam Should Bemoulded With Density = 70.0 ±8.0 Kg / M3 And Hardness = 20 ±2 For Seat & 16 ±2 For Back At 25% Compression. 4 ) Armrests: The Armrest Structure Should Bemade Up Of 2.2 ±0.03Crn Dia X 0.25 ±0.02Cm Thk M.S. E R.W. Tube Welded To The Tubular Frame Structure And Having A Scratch-Resistant Tant Abs Arm Top. 5 ) Full Desklet: The Full Desklet Assembly Should Beflip-Up Type And Should Bemade Up Of Extension Tube Of 1.9 ±0.02Em Dia X 0_2 ±0.016Cm Thk Pas. E.R.W. Tube And A Support Tube On L.H. Side Of 1.6 ±0.02Cm Dia X 0.2 ±0.016Cm Thk M.S. E.R.W. Tube On Which An Scratch Resistant Tant Abs Desklet Top Should Befixed And Covered On Bottom Side With A Bottom Cover. 6 ) Brake-Loaded Castors : The Brake-Loaded Castors Should Beassembled To The Chair Legs, To Give A Free Movement For Maneuvering The Chair When Not In Use And It Will Brake The Movement When Load Should Beapplied ( While In Use ) To Give A Stable Feel. The Twin Wheel Castors Should Beinjection Molded In Black Polypropylene. Overall Dimensions Of Chair Seat Height - 47.5 Cm. Height - 89.0Cm. Width & Depth Of Chair As Measured From Base - Width-66.5Cm And Depth-84.0 Cm. The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Approved Brand Highquality ) , Center Table 1 ) Side Table & Center Table Glass: It Is 10 ±0.3 Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade For Focing With Understructure. 2 ) Side & Center Table Understructure: It Is A Welded Assembly Made In Ss202 Grade Dia. 12±0.04 As Per Is:1762. Width Of Table= 112.0 Cm, Depth=60.0 Cm, Height=34.9 Cm. ( Pisa Center Table ) ( Approved Brand Highquality ) , Sofa 3 Seater1 ) Seat Foam : The Seat Is Made Up Of Pu Foam In Density 28 ±2 Kg / Cu.Mtr With An Additional Top Layer Of Supersoft Pu Foam In Density 32 ± 2 Kg / Cu, Upholstered With Fabric Or Leatherette. 2 ) Back Foam : The Back Is Made Up Of Pu Foam In Density 28 ± 2 Kg / Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 32±2 Kg / Cu. Mtr, Upholstered With Fabric Or Leatherette. 3 ) Understructre : Understructure Is Made Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood [ Moisture Resistance & Termite Proof As Per Is:303 ] & Pinewood Of Cross Sections Devoid Of Major Knots & Surf Defects. 6 Nos. Per Seat & 3.8Mm Dia Zigzag Spring Assembly Is Mounted Over Understructure For Cushioning Purpose. 4 ) Leg Assembly : It Is A Welded Assembly Made In Stainless Steel ( Grade Ss 202 ) Tube & Plate With Plastic Endcap. Width ( W ) : 206.0 Cm. Depth ( D ) : 90.5 Cm. Height ( H ) : 85.5 Cm. Seat Height ( Sh ) : 45.0 Cm. ( Pisa 3 Seater ) ( Approved Brand Highquality ) , Workstations - 1500 X 600Providing And Placingspine And Fin Based Modular Workstation, With Partition Thickness As 52.4 Mmthk And Ht -1200 Including Powder Coated Aluminium Trims. Fin:Out Of 22.5 Mm Thk Panel Formed Out Of Blocks Which Are 18 Mm Thk Plb Boards Wrapped With Laminateat Intermediate Level. Top Block Finished In Fabric Finish. Bottom Block Is Finished In Metal Finish. Tiles On Main Spine: Combination Of Top Tiles Are Fabric Tile. Bottom Tiles - Plain Metal. Intermediate Blocks On Main Spine Intermediate Blocks Are Given In Dl + Dl Finsh. Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Worksurf - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1500 Mm W X 600 Mm D. Pedestals- Nova Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File. Cpu Trolley - With Castors. Kbpt Without Mousetray - Metal. Note: All Partitions And Side Panels Have Levelling Screws For Adjustment In Case Of Uneven Floor To Take Care Of + / - 40 Mm Of Uneven Flooring. The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Approved Brand Highquality ) , Staff High Back Chair1. Seat / Back Assembly: The Cushioned Seat Assembly Consists Of Seat Base Moulded In Glass-Filled Poly-Amide, Moulded Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric. The Cushioned Back Assembly Consists Of Back Inner Moulded In Polypropylene In-Situ Moulded With Polyurethane Foam & Upholstered With High Stretch Knitted Polyester Fabric. Back Size : 45.5 Cm. ( / 1 / ) X 53.0 Cm. ( H ) Seat Size : 48.5 Cm. ( W ) X 49.0 Cm. ( D ) 2. High Resilience ( Hr ) Polyurethane Foam: The Hr Polyurethane Foam Used In Seat And Backcushion Is Moulded In Density Min 48 Kg / M3, And Hardness Load 15 ± 2 Kgf As Per Is:7888 For 25% Compression. 3. Tilt Mechanism, Spines & Spine Connector: The Seat And Back Are Firmly Connected To The Base Frame And Are Cantilevered In Such A Way That It Gives A Multi-Dimensional Movement Possibility Just With A Simple Lean On The Sides Or Back, Without Need For Complex Manual Adjustments. The Cantilevered Seat Offers Impact Cushioning While Sitting And Synchronises With The Back Movement During Posture Changes. The S Shaped Spines Moulded In High Strength Glass-Filled Poly-Amide And The Spine Connector Moulded In Glass-Filled Poly-Amide Form The Back-Spine Structure Involved In Multi-Dimensional Recline Motion. The Variable Tilt Angle Recline Motion Can Be Adjusted With 3 Position Tilt Limit Featurewhich Should Be Inbuilt In Seat Base And The Tension ( Return Force ) Should Be User Weight Dependent. 4. Adjustable Armrests: The Assembly Consists Of Armrest Housing Sliding Over The Armrest Structure, Both Moulded In Glass-Filled Poly-Amide: The Height Adjustment Feature Should Be Button Operated Having Adjustment Of 6.6±0.5Cm. The Armrest Top Should Be Made Up Of Integral Skin Pu Moulded Over Plastic Inner Moulded In Glass-Filled Poly-Amide. 5, Pneumatic Height Adjustment: The Seating Height Can Be Adjusted With A Pneumatic Gas-Lift Having An Adjustment Stroke Of 9.2 ± 0.3 Cm 6. Pedestal Assembly: The Pedestal Should Be Injection Moulded In Glass-Filled Poly-Amide And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be 66.0±0.5 Cm. Pitch Centre Diameter And 76.0±1.0 Cm. With Castors 7. Twin Wheel Castors :5 Nos. Twin Wheel Castos Are Injection Moulded In Poly-Amide Having 5.0 ± 0.1 Cm Wheel Diamter Assembled To The Pedestal. Overall Dimensions Of Chair Seat Height - Min 44.5 To Max 53.8 Cm. Height - Min 99.5 To Max 108.8 Cm. Width & Depth Of Chair As Measured From Pedestal - Width-76.0 Cm And Depth-76.0 Cm. The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Approved Brand Highquality ) , Penta Workstations - 1500 X 1500 X 600 Providing And Placingpanel & Tile Based Modular Workstation, With Partition . Thickness As 52.4 Mmthk And Ht -1200 Including Powder Coated Aluminium Trims. Fin:Out Of 22.5 Mm Thk Panel Formed Out Of Blocks Which Are 18 Mm Thk Plb Boards Wrapped With Laminateat Intermediate Level. Top Block Finished In Fabric Finish. Bottom Block Is Finished In Metal Finish. Tiles On Main Spine: Combination Of Top Tiles Are Fabric & Fabric Magnetic Tile. Bottom Tiles - Plain Metal. Split Tiles On Main Spine: Combination Of Two Finishes For The Top Tiles On The User Side Shall Be Split Fabric Tackable Along With Split Fabric White Board.Intermediate Blocks On Main Spine Intermediate Blocks Are Given In Dl + Dl Finsh. Wire Management Through Main Spine- Wires Shall Be Taken Into The System Through Cable Ducts From The Junction Boxes And It Is Carried Upto The Panels Through Concealed Conduits Inside The Blocks. Worksurf - Out Of 25 Mm Thk Prelam Particle Board With Flat Pvc Lipping Edge Banding Of Size 1500 Mm W1 X 1500 Mm W2 X 600 Mm D. Pedestals- Nova Pedestal Flat Metal Front, Full Ht Free Standing Central Locking Of Size 390 Mm W X 435 Mm D X 646 Mm Ht 3Dr = 2Box+1File.Cpu Trolley - With Castors. Kbpt Without Mousetray - Metal The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Penta 1500Mm*1500Mm ) ( Approved Brand Highquality ) , Officers Table 2100X2250x7502100x2250x750 Primary Work Surf Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Soft Closing Access Flap With In-Build Power Box Are Provided On Work Surf For Wire Management Secondary Work Surf Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Modesty Panel Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Under Structure Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Integrated Pedestal Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Drawer Fronts Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top Pedestal Construction Is Box-Box-File Type Which Uses Powder Coated 400 Mm Long Metal Panel Drawer Slides. Drawer Extension Is 325 Mm. Drawers Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening. Pedestals Are Provided With Lock For Security. The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Approved Brand Highquality ) , 1800X500x750 Top Panel-Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Slide Door Unit-Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Confirming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping For Body Panels Like Side, Bottom, Back And Shelves. Shutters Are Made Of 25Mm Thick Mdf One Side Pre-Laminate Board Confirming To Is-14587:1998 With 0.4Mm Pvc Membrane Pressed On To Top. Shutters Have A Soft Closing & Anti Slam Mechanism. Handles Are Provided For Ease Of Opening.Storage Is Provided With Lock For Security. The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Approved Brand Highquality ) , Leather High Back Chairseat / Back Assembly : The Cushioned Seat Should Bemade Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Beupholstered With Pure Leather And Moulded High Resilience ( Hr ) Polyurethane Foam Of Density 45±2 Kg / M3, And Hardness Load 16 ± 2 Kgffor 25% Compression.The Cushioned Back Should Bemade Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Pure Leather. Seat Size : 47.6 Cm. ( W ) X 49.2 Cm. ( D ) Back Size : 47.5 Cm. ( W ) X 77 Cm. ( D ) Armrests: The Armrest Top Should Bemoulded From Polyurethane ( Pu ) , Upholstered In Pure Leather And Mounted On To A Drop Lift Adjustable Type Tubular Armrest Support Made Of 03.81±0.03 Cm X 0.2±0.01 Cm Thk M.S E.R.W Tube Having Chrome Plated Finish.The Armrest Height Adjustable Up To 6.5±0.5Cm In 5 Steps. Active Bio-Synchro Mechanism: The Adjustable Tilting Mechanism Should Bedesigned With The Following Features: • 360° Revolving Type. • Front-Pivot For Tilt With Feet Resting On Ground And Continuous Lumbar Support Ensuring More Comfort. • Tilt Tension Adjustment Can Be Operated In Seating Position. • 5-Position Tilt Limiter Giving Option Of Variable Tilt Angle To The Chair. • Seat / Back Tilting Ratio Of 1: 2 • The Mechanism Housing Should Bemade Up Of Hpdc Aluminium Black Powder Coated. Seat Depth Adjustment: Seat Depth Adjustment Should Beintegrated In The Seat Through A Sliding Mechanism. Seat Depth Adjustment Range Should Beof 6.0±0.5 Cm. Adjustable Back Support: Back Frame Should Beconnected To The Up / Dn Mechanism Housed In Plastic T Spine. It Can Be Adjusted In The Range Of 7.42±0.5 Cm For The Comfortable Back Support To Suit Individual Need. Pneumatic Ht. Adjustment: The Pneumatic Height Adjustment Has An Adjustment Stroke Of 10.0±0.3 Cm. Pedestal Assembly The Pedestal Should Behigh Pressure Die Cast Polishedaluminium And Fitted With 5 Nos. Twin Wheel Castors. The Pedestal Should Be65.0 ± 0.5Cm. Pitch-Center Dia. ( 75.0 ± 1.0Cm. With Castors. ) Twin Wheel Castors:The Twin Wheel Castors Should Beinjection Mouldedin Black Polypropylene. Overall Dimensions Of Chair Seat Height -44.5 To 54.5 Cm. Height -114.0-131.5 Cm. Width & Depth Of Chair As Measured From Base - Width-76.1 Cm And Depth-76.1 Cm. The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( La Sedehigh Back ) ( Approved Brand Highquality ) , Leather Visitor Chair1 ) Seat / Back Assembly : The Cushioned Seat Should Bemade Of Injection Molded Plastic Outer & Inner. Plastic Inner Should Beupholstered With Pure Leather And Moulded High Resilience ( Hr ) Polyurethane Foam Of Density 45±2 Kg / M3, And Hardness Load 16 ± 2 Kgffor 25% Compression.The Cushioned Back Should Bemade Of Pu Foam With Insitu Molded Ms E.R.W Round Tube Of Size 1.9±0.03Cm X 0.16 ±0.0128Cm. It Upholstered With Pure Leather. Seat Size : 47.6 Cm. ( W ) X 49.2 Cm. ( D ) Back Size : 46.5 Cm. ( W ) X 59.5 Cm. ( D ) 3 ) Visitor Tubular Frame: The Tubular Frame Should Becantilever Type And Made Of Ø2.54± 0.03 Cm X 0.02 ± 0.016Cm Thick Ss 202 Tube. The Back Should Beconnected To Frame Through Chrome Plated High Pressure Die Case Connector Piece. Overall Dimensions Of Chair Seat Height -46.2 Cm. Height -98.2 Cm. Width & Depth Of Chair As Measured From Base - Width-60.9 Cm And Depth-64.7 Cm. The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Approved Brand Highquality ) , Sofa 2 Seater 1 ) Seat Foam : The Seat Is Made Up Of Pu Foam In Density 28 ±2 Kg / Cu.Mtr With An Additional Top Layer Of Supersoft Pu Foam In Density 32 ± 2 Kg / Cu, Upholstered With Fabric Or Leatherette. 2 ) Back Foam : The Back Is Made Up Of Pu Foam In Density 28 ± 2 Kg / Cu. Mtr With Two Additional Top Layer Of Supersoft Foam Of Density 32±2 Kg / Cu. Mtr, Upholstered With Fabric Or Leatherette. 3 ) Understructre : Understructure Is Made Up Of 1.2±0.1 Cm. Thick Hot Pressed Plywood [ Moisture Resistance & Termite Proof As Per Is:303 ] & Pinewood Of Cross Sections Devoid Of Major Knots & Surf Defects. 6 Nos. Per Seat & 3.8Mm Dia Zigzag Spring Assembly Is Mounted Over Understructure For Cushioning Purpose. 4 ) Leg Assembly : It Is A Welded Assembly Made In Stainless Steel ( Grade Ss 202 ) Tube & Plate With Plastic Endcap. Width ( W ) : 146.0 Cm. Depth ( D ) : 90.5 Cm. Height ( H ) : 85.5 Cm. Seat Height ( Sh ) : 45.0 Cm. ( Approved Brand Highquality ) , Corner Table1 ) Side Table & Center Table Glass: It Is 10 ±0.3 Mm Thick Black Tinted Toughened Glass Uv Glued With Bushes Made In Ss 202 Grade For Focing With Understructure. 2 ) Side & Center Table Understructure: It Is A Welded Assembly Made In Ss202 Grade Dia. 12±0.04 As Per Is:1762. Width Of Table= 60.0 Cm, Depth=60.0 Cm, Height=34.9 Cm. ( Approved Brand Highquality ) , Conference Table Square 1000 X 1000 X 740 Work Surf-Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Soft Closing Access Flap Provided For Access To Power Supply And Audio Cables. Work Top Is Available In Two Shapes Square And Pebble ( Round ) Side Panel-Made Of 25Mm Thick Pre-Laminated Twin Board Of E1-P2 Grade And Approved Shade Conforming To Is-12823:1990 Matching To The Worktop, Edge Banded With Matching 2 Mm Thick Pvc Lipping. Cutout With Gromet Provided For Routing Cables In Case Any Audio Visual Equipment Is To Be Fixed Later. Understructur-The Under-Structure Consists Of An Inner Tube Assembly With Top For Worktop Mounting And Base Plate With Levellers. The Top Plate Is Made Of 5Mm Thk Hot Rolled Steel Plates ( Hr ) ( As Per Is: 2062 ) & The Bottom Plate Is Made Of 8Mm Thk Hot Rolled Steel Plates ( Hr ) ( As Per Is:2062 ) . The Inner Tube Assembly Is Made Of 25.4Mmx 25.4Mm X 1.2Mm Thk Round Electric Resistant Welded Tube ( Erw ) ( As Per Is:7138 ) Welded Together Using Tungsten Inert Gas Welding. The Whole Structure Is Epoxy Polyester Powder Coated ( Dft 40-60 Microns ) . The Product Has A Knock-Down Construction. Cutout For Standard Anchor Roma 6 Module Is Provided For Electrical Fittings.An Additional Cutout With A Plate Is Provided For Mounting Audio Visual Cables ( Eg Hdmi, Vga-A, Etc. ) Removable Panel-The 3D Removable Panels Are Provided For Ease Of Servicibility. It Also Provides Easy Access To Internal Sp In Case Of Any Audio Visual Equipment Is To Be Added Later. It Is Made Of 1.2Mm Crca Ms Is:513 And Epoxy Polyester Powder Coated ( Dft 40-60 Microns ) . The Product Must Be Either Greenguard Or Bifma Level Or Iaq Or Griha Certified. The Certificate Must Be Attached Along With The Technical Bid. The Certificate Must Mention The Manufacturers Name As Well As Model Name. The Certificate Must Be From An Authorised Issuing Agency Only. The Certificate Must Be Verifiable From The Valid Issuers Website. ( Approved Brand Highquality )

INR 1000 /-

INR 79950.0 /-

INR 39.97 Lakhs /-

Name of Work:- Purchase of furniture items for EOC Building.Leh

Sl. No.	Item Description
1	Conference Table 12 Seater 3600 X 1500 X 740 Work top--Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping.Soft closing dual access flap provided for access to power supply and data cables.Understructure-The Under-structure consists of mixture of 25mm and 18mm Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Anodised aluminium alloy 63400 - WP profile is added at bottom edges for improving the aesthetics. The product has a knock-down construction.Wire Management-A wire raiser made of 0.8mm CRCA MS IS:513. It is epoxy polyester powder coated (DFT 40-60 microns) for flow of wires and cables. A Power box with 2 cutouts on either sides for standard 8 module Anchor Roma is provided. Beside each cutout, an additional cutout with plate is provided for mounting Audio Visual Cables(eg. HDMI,VGA-A,etc). The product must be either Greenguard or Bifma Level or IAQ or Griha certified. The certificate must be attached along with the technical bid. The certificate must mention the manufacturer"s name as well as Model name. The certificate must be from an authorised issuing agency only. The certificate must be verifiable from the valid issuer"s website.( Mingle10 seater MEM Offiering with Tobacco Ash.)(Approved brand HighQuality)
2	Officers Mesh back chair with HeadrestSEAT/BACK ASSEMBLY:The Cushioned seat assembly consshould be ts of seat outer (material-30% Glass Fiber Nylon)& upholstered Seat inner (material- Poly Propylene) with moulded Polyurethane foam & polyster fabric. The NetBack should bemade up of Back outer (material-Glass Fiber Filled Nylon)& Back inner (material- PP) and upholstered using Polyester Mesh fabric with high tenacity yarn. Full Back Size: 46.5 cm. (W) x 60.0 cm. (H) Seat Size : 51.0 cm. (W) x 49.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should bemoulded with density = 45 +/- 2 kg/m³ and Hardness load 12 +/- 2 kgffor 25% compression. BACK SPINE: The support spine should bemade up of High Pressure Die cast polished hed Aluminum. ARMRESTS : The armrest should behaving two adjustment, Height (6.0±0.5cm) and Depth (6.0±0.5cm). Height adjustment should beprovided in Aluminum structure of armrest which should beconnected to Aluminum Back spine and should beoperated by button. The depth adjustment should beprovided in pad which should befixed to armrest structure. Armrest Top should bemade up of PU molded over plastic inner. ACTIVE BIO-SYNCHRO mechanism: The adjustable tilting mechanism should bedesigned with the following features: • 360° revolving type • Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort • Tilt tension adjustment can be operated in seating position • 5 position Tilt limiter giving option of variable tilt angle to the chair • Seat / back tilting ratio of 1:2 • The mechanism housing should bemade up of HPDC Aluminum & black powder coated (DFT 40 to 60 micron) SEAT DEPTH ADJUSTMENT: Seat depth adjustment should beintegrated in the seat through a sliding mechanism. Seat depth adjustment range should beof 3.75±0.1 cmLUMBAR SUPPORT ASSEMBLY: The Lumbar support assembly should consistof lumbar spine (material-Glass Fiber Filled Nylon) which should befixed toAluminum Back spine. The Lumbar pad (material- Poly Propylene) should befixed to lumbar spine through lumbar Pad support. Lumbar Support Assembly has height adjustment of 5.0±0.5cmPNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3cm. PEDESTAL ASSEMBLY WITH CASTORS:The pedestal should beHigh Pressure Die cast polishedAluminum and fitted with 5 nos. twin wheel castors. The pedestal should be65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.)TWIN WHEEL CASTORS:The twin wheel castors should beinjection moulded in black PP having 6.0± 0.1cm wheel Diameter.The neckrest assembly consshould be ts of upholstered Neckrest inner(material-PolyPropylene) with moulded Polyurethane foam and Polyster fabric.Upholstered inner should befixed to Neckrest cover.Neckrest should befixed to Back assembly through Neckrest spine .Neckrest assembly has height adjustment of 5.5 +/- 0.5cm and Rotation adjustment of overall 20° +/- 2°. Overall Dimensions of Chair Seat Height - min 45.5 to max 55.5cm.Height - min 95.5 to max 105.5 cm. Width & Depth of Chair as measured from pedestal - Width-75.0 cm and Depth-75.0 cm.  The product must be either Greenguard or Bifma Level or IAQ or Griha certified. The certificate must be attached along with the technical bid. The certificate must mention the manufacturer"s name as well as Model name. The certificate must be from an authorised issuing agency only. The certificate must be verifiable from the valid issuer"s website. (ACEfull Back with Headrest )(Approved brand HighQuality)
3	Officers ChairSEAT/BACK ASSEMBLY:The Cushioned seat assembly consshould be ts of seat outer (material-30% Glass Fiber Nylon)& upholstered Seat inner (material- Poly Propylene) with moulded Polyurethane foam & polyster fabric. The NetBack should bemade up of Back outer (material-Glass Fiber Filled Nylon)& Back inner (material- PP) and upholstered using Polyester Mesh fabric with high tenacity yarn. Full Back Size: 46.5 cm. (W) x 60.0 cm. (H) Seat Size : 51.0 cm. (W) x 49.0 cm. (D) HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should bemoulded with density = 45 +/- 2 kg/m³ and Hardness load 12 +/- 2 kgffor 25% compression. BACK SPINE: The support spine should bemade up of High Pressure Die cast polished hed Aluminum. ARMRESTS : The armrest should behaving two adjustment, Height (6.0±0.5cm) and Depth (6.0±0.5cm). Height adjustment should beprovided in Aluminum structure of armrest which should beconnected to Aluminum Back spine and should beoperated by button. The depth adjustment should beprovided in pad which should befixed to armrest structure. Armrest Top should bemade up of PU molded over plastic inner. ACTIVE BIO-SYNCHRO mechanism: The adjustable tilting mechanism should bedesigned with the following features: • 360° revolving type • Front-pivot for tilt with feet resting on ground & continuous lumber support ensuring more comfort • Tilt tension adjustment can be operated in seating position • 5 position Tilt limiter giving option of variable tilt angle to the chair • Seat / back tilting ratio of 1:2 • The mechanism housing should bemade up of HPDC Aluminum & black powder coated (DFT 40 to 60 micron) SEAT DEPTH ADJUSTMENT: Seat depth adjustment should beintegrated in the seat through a sliding mechanism. Seat depth adjustment range should beof 3.75±0.1 cmLUMBAR SUPPORT ASSEMBLY: The Lumbar support assembly should consistof lumbar spine (material-Glass Fiber Filled Nylon) which should befixed toAluminum Back spine. The Lumbar pad (material- Poly Propylene) should befixed to lumbar spine through lumbar Pad support. Lumbar Support Assembly has height adjustment of 5.0±0.5cmPNEUMATIC HEIGHT ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0 ± 0.3cm. PEDESTAL ASSEMBLY WITH CASTORS:The pedestal should beHigh Pressure Die cast polishedAluminum and fitted with 5 nos. twin wheel castors. The pedestal should be65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS:The twin wheel castors should beinjection moulded in black PP having 6.0± 0.1cm wheel Diameter. Overall Dimensions of Chair Seat Height - min 45.5 to max 55.5cm. Height - min 95.5 to max 105.5 cm. Width & Depth of Chair as measured from pedestal - Width-75.0 cm and Depth-75.0 cm. The product must be either Greenguard or Bifma Level or IAQ or Griha certified. The certificate must be attached along with the technical bid. The certificate must mention the manufacturer"s name as well as Model name. The certificate must be from an authorised issuing agency only. The certificate must be verifiable from the valid issuer"s website. (Kareena High back)(Approved brand HighQuality)
4	Officers Visitor Chair 1. SEAT/BACK ASSEMBLY:The Cushioned seat assembly consshould be ts of seat outer (material-30% Glass Fiber Nylon)& upholstered Seat inner (material- Poly Propylene) with moulded Polyurethane foam & polyster fabric. The NetBack should bemade up of Back outer (material-Glass Fiber Filled Nylon)& Back inner (material- PP) and upholstered using Polyester Mesh fabric with high tenacity yarn. Full Back Size: 46.5 cm. (W) x 60.0 cm. (H) Seat Size : 51.0 cm. (W) x 49.0 cm. (D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR Polyurethane foam should bemoulded with density = 45 +/- 2 kg/m³ and Hardness load 12 +/- 2 kgffor 25% compression. 3. BACK SPINE: The support spine should bemade up of High Pressure Die cast polished hed Aluminum. 4. LUMBAR SUPPORT ASSEMBLY: The Lumbar support assembly should consist of lumbar spine (material-Glass Fiber Filled Nylon) which should befixed toAluminum Back spine. The Lumbar pad (material- Poly Propylene) should befixed to lumbar spine through lumbar Pad support. Lumbar Support Assembly has height adjustmentof 5.0±0.5cm5. TUBULAR FRAME (3012AX): The powder coated (DFT 40-60 micron) tubular frame should becantilever type & made of Ø2.54±0.03 cm x 0.2±0.016 cm thk MS ERW tube. Overall Dimensions of Chair Seat Height - 48.5cm. Height - 99.5cm. Width-65.5 cm and Depth-58.2 cm. The product must be either Greenguard or Bifma Level or IAQ or Griha certified. The certificate must be attached along with the technical bid. The certificate must mention the manufacturer"s name as well as Model name. The certificate must be from an authorised issuing agency only. The certificate must be verifiable from the valid issuer"s website. (ACE Visitor)(Approved brand HighQuality)
5	Training Room Chairs1) SEAT / BACK: The seat sub-assembly should bemade up of 1.2±0.1cm thk Plywood upholstered with moulded foam and polyester fabric and covered with an injection-moulded polypropylene outer cover. The seat can tip-up when not in use and thshould befeature can be used while stacking the chairs horizontally The back sub-assembly should bemade up of injection-moulded polypropylene inner upholstered with moulded foam and polyester fabric and covered with an injection-moulded polypropylene outer cover. The contoured back with width extension at the bottom should be a should bedesigned to give comfort to lower back. The back flexing features allows the back to tilt by 9c±2" to aid the user in adopting a comfortable reclining posture. Both these sub-assemblies should befixed to the tubular structure, BACK SIZE: 45.2cm (W) X 44.6cm (I-I) SEAT SIZE: 47.0cm (W) X 50.0cm (D) 2) TUBULAR FRAME STRUCTURE: The powder-coated 4 leg structure should bemade of 2.2 ±0.03cm dia x 0.25 ±0.02cm thk M.S. E.R.W. Tube front and rear leg welded along with connecting tube made of 1.9 ±-0.02cm dia x 0.2 ±0.016cm thk M.S. E.R.W. Tube to form the tubular frame assembly. The legs should beprovided with injection-moulded adopter bush in black Nylon and brake-loaded castors enabling easy maneuvering while not in use and stable sitting while in use_ The chairs can be stacked horizontally when not in use_ 3) POLYURETHANE FOAM: The Polyurethane foam should bemoulded with density = 70.0 ±8.0 kg/m3 and Hardness = 20 ±2 for Seat & 16 ±2 for back at 25% compression. 4) ARMRESTS: The armrest structure should bemade up of 2.2 ±0.03crn dia x 0.25 ±0.02cm thk M.S. E R.W. Tube welded to the Tubular Frame structure and having a scratch-resistant tant ABS Arm top. 5) FULL DESKLET: The Full Desklet assembly should beFlip-up type and should bemade up of extension tube of 1.9 ±0.02em dia x 0_2 ±0.016cm thk PAS. E.R.W. Tube and a support tube on L.H. side of 1.6 ±0.02cm dia x 0.2 ±0.016cm thk M.S. E.R.W. Tube on which an scratch resistant tant ABS desklet top should befixed and covered on bottom side with a bottom cover. 6) BRAKE-LOADED CASTORS : The brake-loaded castors should beassembled to the chair legs, to give a free movement for maneuvering the chair when not in use and it will brake the movement when load should beapplied (while in use) to give a stable feel. The twin wheel castors should beinjection molded in black Polypropylene. Overall Dimensions of Chair Seat Height - 47.5 cm. Height - 89.0cm. Width & Depth of Chair as measured from base - Width-66.5cm and Depth-84.0 cm. The product must be either Greenguard or Bifma Level or IAQ or Griha certified. The certificate must be attached along with the technical bid. The certificate must mention the manufacturer"s name as well as Model name. The certificate must be from an authorised issuing agency only. The certificate must be verifiable from the valid issuer"s website. (Approved brand HighQuality)
6	Center Table 1) SIDE TABLE & CENTER TABLE GLASS: It is 10 ±0.3 mm thick black tinted Toughened glass UV glued with bushes made in SS 202 grade for focing with understructure. 2) SIDE & CENTER TABLE UNDERSTRUCTURE: It is a welded Assembly made in SS202 grade Dia. 12±0.04 as per IS:1762. Width of table= 112.0 cm, Depth=60.0 cm, height=34.9 cm.(Pisa Center Table )(Approved brand HighQuality)
7	Sofa 3 Seater1)SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. 2)BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. 3)UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surf defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. 4)LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. Width (W): 206.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM.(Pisa 3 seater) (Approved brand HighQuality)
8	WORKSTATIONS - 1500 x 600Providing and placingspine and fin based modular workstation, with partition thickness as 52.4 mmthk and ht -1200 including powder coated aluminium trims. FIN:out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminateat intermediate level. Top block finished in fabric finish. Bottom block is finished in metal finish. Tiles on main spine: Combination of top tiles are fabric tile. Bottom tiles - Plain metal. INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in DL + DL finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Worksurf - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500 mm w x 600 mm d. Pedestals- Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file. CPU trolley - with castors. KBPT without mousetray - metal. Note: All partitions and side panels have levelling screws for adjustment in case of Uneven floor to take care of +/- 40 mm of uneven flooring. The product must be either Greenguard or Bifma Level or IAQ or Griha certified. The certificate must be attached along with the technical bid. The certificate must mention the manufacturer"s name as well as Model name. The certificate must be from an authorised issuing agency only. The certificate must be verifiable from the valid issuer"s website. (Approved brand HighQuality)
9	Staff High Back Chair1. SEAT/BACK ASSEMBLY: The cushioned seat assembly consists of seat base moulded in glass-filled Poly-amide, moulded Polyurethane foam & upholstered with high stretch knitted polyester fabric. The cushioned back assembly consists of back inner moulded in Polypropylene in-situ moulded with Polyurethane foam & upholstered with high stretch knitted polyester fabric. Back Size : 45.5 cm. (/1/) x 53.0 cm. (H)Seat Size : 48.5 cm. (W) x 49.0 cm. (D) 2. HIGH RESILIENCE (HR) POLYURETHANE FOAM: The HR polyurethane foam used in seat and backcushion is moulded in Density Min 48 kg/m3, and hardness load 15 ± 2 kgf as per IS:7888 for 25% compression. 3. TILT MECHANISM, SPINES & SPINE CONNECTOR: The seat and back are firmly connected to the base frame and are cantilevered in such a way that it gives a multi-dimensional movement possibility just with a simple lean on the sides or back, without need for complex manual adjustments. The cantilevered seat offers impact cushioning while sitting and synchronises with the back movement during posture changes. The ""S"" shaped spines moulded in high strength glass-filled Poly-amide and the spine connector moulded in glass-filled Poly-amide form the back-spine structure involved in multi-dimensional recline motion. The variable tilt angle recline motion can be adjusted with 3 position Tilt Limit featurewhich should be inbuilt in seat base and the tension (return force) should be user weight dependent. 4. ADJUSTABLE ARMRESTS: The assembly consists of armrest housing sliding over the armrest structure, both moulded in glass-filled Poly-amide: The height adjustment feature should be button operated having adjustment of 6.6±0.5cm. The Armrest Top should be made up of integral skin PU moulded over plastic inner moulded in glass-filled Poly-amide. 5, PNEUMATIC HEIGHT ADJUSTMENT: The seating height can be adjusted with a pneumatic gas-lift having an adjustment stroke of 9.2 ± 0.3 cm 6. PEDESTAL ASSEMBLY: The pedestal should be injection moulded in glass-filled Poly-amide and fitted with 5 nos. twin wheel castors. The pedestal should be 66.0±0.5 cm. pitch centre diameter and 76.0±1.0 cm. with castors 7. TWIN WHEEL CASTORS :5 nos. twin wheel castos are injection moulded in Poly-amide having 5.0 ± 0.1 cm wheel diamter assembled to the pedestal. Overall Dimensions of Chair Seat Height - min 44.5 to max 53.8 cm. Height - min 99.5 to max 108.8 cm. Width & Depth of Chair as measured from pedestal - Width-76.0 cm and Depth-76.0 cm. The product must be either Greenguard or Bifma Level or IAQ or Griha certified. The certificate must be attached along with the technical bid. The certificate must mention the manufacturer"s name as well as Model name. The certificate must be from an authorised issuing agency only. The certificate must be verifiable from the valid issuer"s website.(Approved brand HighQuality)
10	PENTA WORKSTATIONS - 1500 X 1500 X 600 Providing and placingpanel & tile based modular workstation, with partition . thickness as 52.4 mmthk and ht -1200 including powder coated aluminium trims. FIN:out of 22.5 mm thk panel formed out of blocks which are 18 mm thk PLB boards wrapped with laminateat intermediate level. Top block finished in fabric finish. Bottom block is finished in metal finish. Tiles on main spine: Combination of top tiles are fabric & fabric magnetic tile. Bottom tiles - Plain metal. SPLIT Tiles on main spine: Combination of two finishes for the top tiles on the user side shall be split fabric tackable along with split fabric white board.INTERMEDIATE BLOCKS on main spine Intermediate blocks are given in DL + DL finsh. Wire Management through main spine- Wires shall be taken into the system through cable ducts from the junction boxes and it is carried upto the panels through concealed conduits inside the blocks. Worksurf - out of 25 mm thk prelam particle board with flat pvc lipping edge banding of size 1500 mm w1 X 1500 MM w2 x 600 mm d. Pedestals- Nova pedestal flat metal front, full ht free standing central locking of size 390 mm w x 435 mm d x 646 mm ht 3dr = 2box+1file.CPU trolley - with castors. KBPT without mousetray - metal The product must be either Greenguard or Bifma Level or IAQ or Griha certified. The certificate must be attached along with the technical bid. The certificate must mention the manufacturer"s name as well as Model name. The certificate must be from an authorised issuing agency only. The certificate must be verifiable from the valid issuer"s website. (Penta 1500mm*1500mm)(Approved brand HighQuality)
11	Officers Table 2100x2250x7502100x2250x750 Primary Work Surf Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Soft closing access flap with in-build power box are provided on work surf for wire management Secondary Work Surf Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Modesty Panel Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Under structure Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Integrated Pedestal Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Drawer fronts made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top Pedestal construction is BOX-BOX-FILE type which Uses powder coated 400 MM long metal Panel Drawer Slides. Drawer extension is 325 MM. Drawers have a soft closing & anti slam mechanism. Handles are provided for ease of opening. Pedestals are provided with lock for security. The product must be either Greenguard or Bifma Level or IAQ or Griha certified. The certificate must be attached along with the technical bid. The certificate must mention the manufacturer"s name as well as Model name. The certificate must be from an authorised issuing agency only. The certificate must be verifiable from the valid issuer"s website.(Approved brand HighQuality)
12	1800x500x750 Top Panel-Made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Slide Door Unit-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade confirming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping for body panels like side, bottom,back and shelves. Shutters are made of 25mm thick MDF one side pre-laminate board confirming to IS-14587:1998 with 0.4mm PVC membrane pressed on to top. Shutters have a soft closing & anti slam mechanism. Handles are provided for ease of opening.Storage is provided with lock for security. The product must be either Greenguard or Bifma Level or IAQ or Griha certified. The certificate must be attached along with the technical bid. The certificate must mention the manufacturer"s name as well as Model name. The certificate must be from an authorised issuing agency only. The certificate must be verifiable from the valid issuer"s website.(Approved brand HighQuality)
13	Leather High Back ChairSEAT/BACK ASSEMBLY : The Cushioned seat should bemade of Injection molded Plastic outer & inner. Plastic Inner should beupholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgffor 25% compression.The Cushioned back should bemade of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather. Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D) BACK SIZE : 47.5 cm. (W) x 77 cm. (D) ARMRESTS: The armrest top should bemoulded from polyurethane(PU), upholstered in pure leather and mounted on to a drop lift adjustable type tubular armrest support made of 03.81±0.03 cm x 0.2±0.01 cm thk M.S E.R.W tube having chrome plated finish.The armrest height adjustable up to 6.5±0.5cm in 5 steps. ACTIVE BIO-SYNCHRO mechanism: The adjustable tilting mechanism should bedesigned with the following features: • 360° revolving type. • Front-pivot for tilt with feet resting on ground and continuous lumbar support ensuring more comfort. • Tilt tension adjustment can be operated in seating position. • 5-position Tilt limiter giving option of variable tilt angle to the chair. • Seat/back tilting ratio of 1: 2 • The mechanism housing should bemade up of HPDC Aluminium black powder coated. SEAT DEPTH ADJUSTMENT: Seat depth adjustment should beintegrated in the seat through a sliding mechanism. Seat depth adjustment range should beof 6.0±0.5 cm. ADJUSTABLE BACK SUPPORT: Back Frame should beconnected to the Up/Dn mechanism housed in Plastic T spine. It can be adjusted in the range of 7.42±0.5 cm for the comfortable back support to suit individual need. PNEUMATIC HT. ADJUSTMENT: The pneumatic height adjustment has an adjustment stroke of 10.0±0.3 cm. PEDESTAL ASSEMBLY The pedestal should beHigh Pressure Die cast polishedAluminium and fitted with 5 nos. twin wheel castors. The pedestal should be65.0 ± 0.5cm. pitch-center dia.(75.0 ± 1.0cm. With castors.) TWIN WHEEL CASTORS:The twin wheel castors should beinjection mouldedin Black Polypropylene. Overall Dimensions of Chair Seat Height -44.5 to 54.5 cm. Height -114.0-131.5 cm. Width & Depth of Chair as measured from base - Width-76.1 cm and Depth-76.1 cm. The product must be either Greenguard or Bifma Level or IAQ or Griha certified. The certificate must be attached along with the technical bid. The certificate must mention the manufacturer"s name as well as Model name. The certificate must be from an authorised issuing agency only. The certificate must be verifiable from the valid issuer"s website.( La Sedehigh Back ) (Approved brand HighQuality)
14	Leather Visitor Chair1) SEAT/BACK ASSEMBLY : The Cushioned seat should bemade of Injection molded Plastic outer & inner. Plastic Inner should beupholstered with pure leather and moulded High Resilience (HR) Polyurethane foam of Density 45±2 kg/m3,and hardness load 16 ± 2 kgffor 25% compression.The Cushioned back should bemade of PU Foam with insitu molded MS E.R.W Round Tube of size 1.9±0.03cm x 0.16 ±0.0128cm. It upholstered with Pure Leather. Seat SIZE : 47.6 cm. (W) x 49.2 cm. (D) BACK SIZE : 46.5 cm. (W) x 59.5 cm. (D) 3) Visitor TUBULAR FRAME: The tubular frame should becantilever type and made of Ø2.54± 0.03 cm X 0.02 ± 0.016cm thick SS 202 tube. The back should beconnected to frame through chrome plated high pressure die case connector piece. Overall Dimensions of Chair Seat Height -46.2 cm. Height -98.2 cm. Width & Depth of Chair as measured from base - Width-60.9 cm and Depth-64.7 cm. The product must be either Greenguard or Bifma Level or IAQ or Griha certified. The certificate must be attached along with the technical bid. The certificate must mention the manufacturer"s name as well as Model name. The certificate must be from an authorised issuing agency only. The certificate must be verifiable from the valid issuer"s website.(Approved brand HighQuality)
15	Sofa 2 Seater 1)SEAT FOAM : The seat is made up of PU foam in Density 28 ±2 kg/cu.mtr with an additional top layer of supersoft PU foam in Density 32 ± 2 kg/cu, upholstered with fabric or leatherette. 2)BACK FOAM : The back is made up of PU foam in Density 28 ± 2 kg/cu. mtr with two additional top layer of supersoft foam of density 32±2 kg/cu. mtr, upholstered with fabric or leatherette. 3)UNDERSTRUCTRE : Understructure is made up of 1.2±0.1 cm. thick hot pressed plywood [moisture resistance & termite proof as per IS:303] & pinewood of cross sections devoid of major knots & surf defects. 6 nos. per seat & 3.8mm Dia zigzag spring assembly is mounted over understructure for cushioning purpose. 4)LEG ASSEMBLY : It is a welded Assembly made in Stainless steel (grade SS 202) tube & plate with plastic endcap. Width (W): 146.0 CM. Depth (D): 90.5 CM. Height (H): 85.5 CM. Seat Height (SH): 45.0 CM.(Approved brand HighQuality)
16	Corner Table1)SIDE TABLE & CENTER TABLE GLASS: It is 10 ±0.3 mm thick black tinted Toughened glass UV glued with bushes made in SS 202 grade for focing with understructure. 2) SIDE & CENTER TABLE UNDERSTRUCTURE: It is a welded Assembly made in SS202 grade Dia. 12±0.04 as per IS:1762. Width of table= 60.0 cm, Depth=60.0 cm, height=34.9 cm.(Approved brand HighQuality)
17	Conference Table Square 1000 x 1000 x 740 Work Surf-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990, Edge banded with matching 2 mm thick PVC lipping. Soft closing access flap provided for access to power supply and audio cables. Work top is available in two shapes Square and Pebble (Round) Side Panel-Made of 25mm Thick Pre-laminated twin board of E1-P2 grade and approved shade conforming to IS-12823:1990 matching to the Worktop, Edge banded with matching 2 mm thick PVC lipping. Cutout with Gromet provided for routing cables in case any Audio Visual equipment is to be fixed later. Understructur-The Under-structure consists of an Inner Tube Assembly with Top for Worktop Mounting and Base plate with levellers. The Top Plate is made of 5mm thk hot rolled steel Plates (HR) (As per IS: 2062) & the bottom plate is made of 8mm thk hot rolled steel Plates (HR) (As per IS:2062). The Inner Tube Assembly is made of 25.4mmx 25.4mm x 1.2mm thk round electric resistant welded tube (ERW)(As per IS:7138) welded together using Tungsten inert gas welding. The whole structure is epoxy polyester powder coated (DFT 40-60 microns). The product has a knock-down construction. Cutout for standard Anchor Roma 6 Module is provided for electrical fittings.An additional cutout with a plate is provided for mounting Audio Visual Cables( eg HDMI,VGA-A,etc.) Removable panel-The 3D removable panels are provided for ease of servicibility. It also provides easy access to internal sp in case of any Audio Visual equipment is to be added later. It is made of 1.2mm CRCA MS IS:513 and EPOXY POLYESTER Powder Coated (DFT 40-60 microns). The product must be either Greenguard or Bifma Level or IAQ or Griha certified. The certificate must be attached along with the technical bid. The certificate must mention the manufacturer"s name as well as Model name. The certificate must be from an authorised issuing agency only. The certificate must be verifiable from the valid issuer"s website. (Approved brand HighQuality)