Food Corporation Of India-FCI has published Tender For Annual Repair And Maintenance Of External And Internal Electrification Works Of Godowns And Ancillaries Such As Office Block, Weighbridge Cabin, Security Barrack, Female Lavatory Block Etc Improvement Of Illumination Inside Godowns At Fsd Ukhru. Submission Date for this Tender is 22-12-2022. Electrification Work Tenders in ukhrul Manipur. Bidders can get complete Tender details and download the document.
Sl. No. | Item Description |
1 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed steel conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. |
2 | Group B |
3 | Dismantling and refixing of following sizes of steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required. |
4 | 20 mm Dia. |
5 | 25 mm Dia. |
6 | Supplying and fixing of following sizes of ISI make steel conduit along with accessories in surface/recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit including dismentling of old conduit as required.. |
7 | 20 mm |
8 | 25 mm |
9 | Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/recessed steel/ PVC conduit including removing of old wires as required. (Polycab / Finolex / RRKabel / Havells) |
10 | 3 x 1.5 sq. mm |
11 | 4 x 1.5 sq. mm |
12 | 5 x 1.5 sq. mm |
13 | 6 x 1.5 sq. mm |
14 | 3x 2.5 sq. mm |
15 | 4 x 2.5 sq. mm |
16 | 3 x 6 sq. mm |
17 | Supplying and fixing 4 way (4 + 12), Double door prewired TP&N MCB distribution board of steel sheet for 415 volts on surface/ recess complete with loose wire box, terminal connectors for all incoming and outgoing circuits, duly prewired with suitable size FR PVC insulated copper conductor up to terminal blocks, tinned copper bus bar, neutral link, earth bar, din bar, detachable gland plate, interconnections, powder painted including earthing etc. as required.(But without MCB/ RCCB/ Isolator) |
18 | Supplying and fixing 63A rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
19 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of single pole and neutral(SPN) in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
20 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
21 | Supplying and fixing 8 way, Double door , single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
22 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), having a sensitivity current 30 mA in the existing MCB DB complete with connections, testing and commissioning etc. as required.(25 A) |
23 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, SP miniature circuit breaker suitable for inductive load of single poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. |
24 | Supplying and fixing of 600mmX 600 mm size metallic frame cover fabricated with 35mm X 35 mm x 5 mm thick angle iron welded construction frame structured and 1.6 mm thick M.S sheet cover plate with double hinges and knobe type locking arrangement including painting , making recess in wall , masonary, plastering and finishing the good (As per drawing) |
25 | Supplying and fixing metal box of 200 mm X 150 mm X 75 mm deep sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. |
26 | Supplying and fixing of 300mmX 300 mm size metallic frame cover fabricated with 25mm X 25 mm x 3 mm thick angle iron welded construction frame structured and 1.6 mm thick M.S sheet cover plate with double hinges and knobe type locking arrangement including painting , making recess in wall , masonary, plastering and finishing the good (As per drawing) |
27 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (5/6A) |
28 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (5/6A) |
29 | Dismantling of existing all types lighting fixture i/c fixing/bracket arrangement from the location complete with all accessories and tube etc. from ceiling, wall, metalic structure including connection etc as required. (Other then credit to estimate items) |
30 | Supplying of 18-22 watt LED lumunar fixture complete with LED retrofit metallic lampbatten fixture powder coated box type body i/c marking of Text and number as required. |
31 | Supplying of aesthetically designed 40 wattLED Well glass Luminare with single piece die cast aluminium housing, (including driver) with IP rating of IP66, complete with internal wiring, with extremely precision designed heat sink suitable for top open for easy maintenance, complete with IP66 protection Class, with polycarbonate cover .The fixture should be suitable formounting. |
32 | Supplying of Outdoor aesthetically designed 50 wattLED Street Light Luminare with single piece die cast aluminium housing, (including driver) with IP rating of IP66, complete with internal wiring, with extremely precision designed heat sink suitable for top open for easy maintenance, complete with IP66 protection Class, with polycarbonate cover .The fixture should be suitable for pole / bracket mounting. |
33 | Supplying and fixing of 32 mm dia X 1.00 metres long G.I. pipe (medium class) bracket for mounting of all type of street light fitting on pole / wall / structure including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required. |
34 | Supplying and fixing out door type loop in loop out cable junction box (200 mm X 150 mm X100 mm)fabricated from 1.6 mm MS sheet enclosed wheather proof, dust proof, water proof and locking arrangement internally embedded gasket with bottom cable entry plat through cable glands. Seperate for incoming and out goingcables and wires duly fitted with following in it. HD Connector for 10 to 16 sqmm-4 Nos. 6 amp SP "C" curve 10 KA MCB-1 No. fixing Clamps-2 Nos. |
35 | Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32amps 240 volts “C” curve DP MCB complete with connections, testing and commissioning etc. as required. |
36 | Supply,Installation,Testing and Commissioningof 300 mmexhaust fanfor 230 V,50Hz complete with all accessories like blade ,canopy, condenser ,regulator,internal wiring of the following makecat . confirming to ISI with up to date amendment etc (Market Rate) |
37 | Installation, testing and commissioning of pre-wired, all types lighting fittings, complete with all accessories and tube etc. directly on ceiling / wall / bracket, including connection with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable and earthing within fitting, within bracket & within loop box/point (Except conduit) etc. as required. |
38 | Wiring for circuit/ submain wiring alongwith earth wire with 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in GI Pipe as required. |
39 | Supplying of XLPE insulated and PVC tape innersheated aluminiumaluminium conductor armoured cable of 1.1 KV grade of following sizes confirming to IS:7098 (Part- I) 1988 with up to date ammendment as required. (Polycab, Finolex, Havells) |
40 | 2x10 sqmm |
41 | 4X16 sqmm |
42 | 4X25 sqmm |
43 | 3.5X50 SQ MM |
44 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of size up to 35 sqmm in the existing masonry open duct as required. |
45 | Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size up to 35 sqmm on wall / pole / steel structure surface as required. |
46 | Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of size up to 35 sqmm in ground including excavaation, sand cushioning , protective covering and refiling the trench etc as required |
47 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade at over head with 8 SWG dia GI wire, Shackle insulator, clamp, nut bolt cable clips etc as required. |
48 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing masonry open duct as required. Above 35 sq. mm and upto 95 sq. mm . |
49 | Laying and fixing of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of FOLLOWING SIZE in ground including excavaation, sand cushioning , protective covering and refiling the trench etc as required( Above 35 sq. mm and upto 95 sq. mm) |
50 | Supplying and fixing of light class G.I. pipe of following size in mm dia. (nominal) 3 meter length along the pole for protection of under ground cable as required. |
51 | 50 mm dia. (nominal). |
52 | Supplying and making end termination with brass compression gland and aluminium lugs for FOLLOWINGsizeof PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. |
53 | 2 X10 sq. mm (19mm) |
54 | 4X16sqmm(28 mm) |
55 | 4X25sqmm(28 mm) |
56 | 3½ X 50 sq. mm (35 mm) |
57 | Supplying and fixing cable route with 10cmX10cmX5mm thick GI plate with inscriptionthere on ,bolted /welded to 35mmX35mmX6mm angle iron ,60cm long and fixing the same in ground as required |
58 | Providing and fixing M.V danger notice plate of 200mm X150mm, made of mild steel at least 2mm thick and vitroeus enameled white on both sides and with inscription in single red color on front side as required |
59 | Supplying, Installation, Testing & Commissioning of cubical type weather,water & dust proof feeder panel for 415 V, 3 Phase, 4 Wire 50 Hz AC supply system having front surface area 02.00 to 2.25 Sq. Mtr. (Approx.) fabricated in compartmentalized (preferably) design from CRCA sheet steel of 2 mm thick for frame work and covers, 3 mm thick for gland plates i/c cleaning & finishing complete with 7 tank process for powder coating in approved shade and shall be dust proof, verm proof, removable cobers, gasketed all around multy tire formation and seperate removable gland plate for each verticle section mounting of MS angle base frame. (Specification, design and mountings as per attached sheet in technical bid) with 125 A Four Pole MCCB-01 Nos.,63AFP MCB-04 Nos.,32A FP MCB-01 nos and 32 A DP MCB-02 Nos. |
60 | Supplying, installing, testing and commissioning of wheather proof, dust proof, water proof 32 Amp. capacity 4 way TPN distribution tap off box made of 1.6mm thick sheet steel enclosure duly painted with powder coating on existing rising mains complete with Incoming 32 Amp ISI marked HRC fuse, 4 Nos. 100 Amp capacity Aluminium bus bars with accessories and "C" curve 10 Ka capacity 5 Nos. 16 amp TPN & 3 Nos 16 amp DP MCB, interconnections, earthing etc. as required. |
61 | Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
62 | Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. |
63 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
64 | The items like wires, cable pices, lighting fixtures, loop boxes, metal articles etc. are to be dismentalled during the work and take away by the giving the credit to the work estimate |
65 | Lighting fixtures, cable, wires, switch gears etc. |
66 | Supplying and fixing of 1200 mm sweep capacitor type A.C ceiling fan including fan regulator fixing at modular switch board complete with 30 cm down rod withhangingshackle , blade canopy suitable for 230/240 volt, 50 cycles/sec., single phase supply conforming to ISI of make Bajaj/ Crompton/orientas amended from time to time. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail