Military Engineer Services-MES has published Tender For Repair Maintenance Of Extrnal Electric Supply System, Incl Street / Security Lights With Connected Items/ Works And Repair/ Maint Of Internal Electrification Work Services Incl Replacement Of Unsv Distribution Main Switch Boards, Submain Wirin. Submission Date for this Tender is 05-01-2023. Electrification Work Tenders in delhi Delhi. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 29-Dec-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-01-2023 |
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exc 1.5m wide and n.exc 1.5m in depth, getting out for electric cable complete in any type of soil complete all as specified and directed |
| 2 | Removing surplus excavated soil to a distance n.exc 50m and depositing where directed at a level n. exc 1.5m above starting point complete all as specified and directed. |
| 3 | Returning, filling in, soil obtained from excavation including spreading, levelling, watering and well ramming in layers n.exc 25cm thick complete all as specified and directed. |
| 4 | Sub class ‘B bricks, old size, brick covering laid dry, flat, transversally along the length of cable on sand cushioning, with width equal to the length of the brick, complete all as specified and as directed |
| 5 | M&L for sand cushioning to under ground cable with a layer of sand 8cm before laying the cable and 15cm after laying the cable (10 cm punned thickness above the top of the upper most cable, total 18 cm), complete all as specified and directed. |
| 6 | Labour only for taking out and relaying/ re-routing old/existing PVC/XLPE armoured aluminium conductor cable after repair complete of following sizes Note :- Excavation & earth work, sand cushioning, bricks protection & GIpipe where required shall be measured & paid seperately :- |
| 7 | Upto size 25 sqmm 2/3.5/4 Core |
| 8 | Size 35 sqmm to 70 Sqmm 3.5 Core |
| 9 | Size 95 sqmm to 150 sqmm 3.5 core |
| 10 | Size 185 sqmm 3.5 core and above |
| 11 | M&L for painting ofsteel tubular poles 9m to 11m length with applying two coats of aluminium paint including cross arms and clamps except embedded portion of pole in ground and concrete after removing old painted surfaces by scraping of poles complete and two coat for making colour band/strip 30 CM with synthetic enamel paint of approved/yellow & black colour up to 1.2 mtr from coping level including numbering of poles complete all as specified and directed |
| 12 | M&L required for checking & locating of fault in underground HT/LT cable of any size by cable fault locator machine complete all as specified and directed |
| 13 | Dismantling & taking out HT/LT burnt cable ends of any size from transformer/LT panel/LT feeder pillar box/trenches any type/size, for repair/making suitable for reconnection to cable, providing lugs to burnt end of cables, preparing fresh terminals and reconnection, fixing the removed portion of cable with transformer/in trenches/along pole/ panel/feeder pillar box, including excavation of loop & refilling complete using old bricks and sand returning filling the excavated soil complete all as specified and directed |
| 14 | M&L in repair for loop junction box, outdoor type, size 30cmx20cmX15cm, made out of engineering plastic one piece moulding type, bus bar rating 63 amps 4 strips aluminium with bus bar mounting colour R, Y, B, N on DMC unbreakable insulator with cable entry main supply from bottom side and pole light connection from back side, simens grey colour, shock proof, rust proof, fire retardant, having front opening and locking arrangementwith MCB SP 10 amps - 01 No, box duly fixedon the pole with flat iron clamp of size 25mm x 3mm with nuts & bolts complete all as specified and directed Note:- Cost of incoming & outgoing cable lugs & glands of suitable size deemed to be included in the quoted rate of this item |
| 15 | M&L (in replacement) for GI tubing light grade with all necessary fittings laid in trenches/under road crossing/fixed on pole/wall/under floor including suitable mild steel FI clamps of required size complete for following sizes :- |
| 16 | 40 mm bore |
| 17 | 50 mm bore |
| 18 | 80 mm bore |
| 19 | Supply and laying in repair cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of following size Note:- Excavation & earth work, sand cushioning, bricks protection & GIpipe where required shall be measured & paid seperately |
| 20 | 10 Sqmm 2 core |
| 21 | 16 Sqmm 4 core |
| 22 | 25 Sqmm 3.5 core |
| 23 | 35 Sqmm 3.5 core |
| 24 | 50 sqmm 3.5 core |
| 25 | 70 sqmm 3.5 core |
| 26 | 95 sqmm 3.5 core |
| 27 | 120 sqmm 3.5 core |
| 28 | 400 sqmm 3.5 core |
| 29 | Making hole below the road by drilling machine or hand drill without damaging road for inserting pipe upto 80 mm dia complete all as specified and directed Note: GI pipe shall be measured & paid separately |
| 30 | Dismantling & taking out defective LT PVC/ XLPE cable from trenches including excavation and earth work, cutting and removing defective parts and supply and fixing straight through joint heat shrink kit complete including jointing material and making connection of LT cables for the following sizes :- |
| 31 | 25 sqmm 3.5 core to 50 sqmm, 3.5 core |
| 32 | 70 sqmm 3.5 core to 120 sqmm, 3.5 core |
| 33 | 150 sqmm 3.5 core to 400 sqmm 3.5 core |
| 34 | Checking all incoming & outgoing connections and Mechanism, cleaning, servicing, overhauling, testing it for proper tripping system complete of 11 KV VCB of Make Crompton Greaves/AREVA/Siemens, installed at sub-station bldg, inspecting, servicingand testing all the connections of control wiring availability of proper DC supply and AC supply, cleaning of contacts, & terminals, using the blower for dusting, servicing of gears, including replacement of faulty control fuses, faulty wiring & faulty indication lamp, checking & closing of tripping system, taking out relay (over current relay and earth fault relay) from the 11 KV VCB and calibrating the relay and proper setting of relay and refixing back in existing position & testing for proper tripping/functioning system complete all as specified & directed. Note:- (i) Necessary certificate for calibration of relay with setting detail shall be submitted by the contractor. (ii) Spare parts will be measured and paid separately |
| 35 | S&F charging handle rod suitable for existing 11 KV VCB 630 amps capacity of make Crompton Greaves/Areva/ABB/Siemens complete all as specified and directed |
| 36 | S&F in repairs Charging Motor assembly set in existing VCB panel of existing make incl all connections & fixing arrangement and testing complete all as specified and directed |
| 37 | S&F in repairs Spring charginggear assembly (big size)for VCB upto 630 Amp as per existing make of VCB complete all as specified and directed |
| 38 | S&F in repairs Spring charginggear assembly (small size)for VCB upto 630 Amp as per existing make of VCB complete all as specified and directed |
| 39 | S&F in repairs power pack unit suitable for 220 volts AC input & 110 volts DC output complete with 12 volts, 7 AH sealed lead acid batteries and suitable voltmeter etc suitable for operation of HT Panel complete all as specified and directed |
| 40 | S&F in repairs Tripping coil assembly 24 V DC for VCB 11 KV as per existing make of VCB as per existing make complete all as specified and directed |
| 41 | S&F in repairs Closing coil assembly 24 V DC for VCB 11 KV as per existing make complete all as specified and directed |
| 42 | S&F in repairs TNC switch (Trip Neutral Close), with 2 NO + 2 NC suitable LT/HT Panel any type/size as per existing as per existing make complete all as specified and directed |
| 43 | S&F in repairs heater, 230 Volt, as per existing wattage suitable for 11 KV HT VCB panel including electric connection as per existing make complete all as specified and directed |
| 44 | Disconnection of all electric connection & taking out old/defective Current Transformer (CT) from 11 KV VCB panel and Supply, fixing, installation & testing of Current transformer, indoor, single phase resin cast CTs of 100-50/5+5 amps ratio, Class 5P-10 with suitable VA burden and accuracy suitable for protection & metering incl making suitable arrangement for fixing in existing VCB panel and connection incl disconnection & taking out old/faulty current transformers (CTs) from 11 KV VCB panel complete all as specified & directed |
| 45 | Disconnection of all electric connection and taking down defective/unsv 11 KV PT and Supply, fixing, installation & testing of Potential transformer (PT) 3 phase, dry and draw out type 11 KV/110 Volt, with suitable VA burden per phase, accuracy class 1.0complete with HT & LTHRC fuses for primary & secondary in VCB complete all as specified & directed Note for item No. 15 to 26:- (i) All the instruments and T&P required for the above jobs shall be arranged by the contractor at site and cost of the deemed to be included in the above rates. (ii) The all above checking, inspection, installation & testing work shall be performed by HT expert/ engineer. |
| 46 | M&L for on line Dehydration of HV/ EHV grade transformer oil including filteration using automatic centrifuging machine minimum three cycles to achieve dielectric strength 50 to 60 KV breaking capacity by absorbing and abolishing all sludge particles as per BS-66-1963 including topping up with new transformer oil as required complete all as directed Note:- - (i)Centrifuging Machine with all T&P & testing machine of oil required for dehydration shall be arranged by the contractor. (ii) Oil required for topping up the transformer will be measured & paid separately. |
| 47 | M&L (in replacement) of silica Gel (Blue colour) in breather of transformer after cleaning of breather. |
| 48 | M&L (in replacement) of breather of transformer of any make/capacity upto 630 KVA with exising size |
| 49 | Supply & filling new transformer oil of having dielectric strenght 60 KVto top up level complete all as specified and directed |
| 50 | M&L for replacement of fibre gasket sheet 3 mm thick to prevent leakage fromtransformer 11/0.433 KV ratio, upto 630 KVA capacity as per existing make complete all as specified and directed |
| 51 | S&F in repairs LT Porcelain bushing with brass stud screwed with brass nuts, bolts and cork washer for transformer of capacity upto 630 KVA as per existing make complete all as specified and directed |
| 52 | S&F in repairs HT 11 KV porcelain bushing with brass stud screwed with brass nuts, bolts and cork washer for transformer of capacity upto 630 KVA as per existing make complete all as specified and directed |
| 53 | M&L for replacement of porcelain insulator with suitable rubber "O" ringfor HT side bushing of transformer upto 630 KVAas per existing make complete all as specified and directed |
| 54 | All as per the description of srl item No 34 above but for LT side bushing |
| 55 | M&L for painting of transformer of capacity upto 400 KVA,outside portion only with one coat with spray painting with synthetic enamel paint after preparation of surface neat and clean for painting including numbering SM/MESNo. withwhite paint as per existing make complete all as specified and directed |
| 56 | M&L in repairs cable jointing kit for 11 KV cable for end termination cold shrink type joint with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable of following size:- |
| 57 | Size 90 sqmm to 185 sqmm, Indoor type |
| 58 | Size 90 sqmm to 185 sqmm, outdoor type |
| 59 | M&L (in repairs) cable jointing kit for 11 KV (Earthed) grade cable for straight through cold shrink type joint with jointing material and accessories suitable for 3 core XLPE armoured aluminium conductor cable complete all as specified & directed for size 70 sqmm to 185 sqmm |
| 60 | Supply & laying in trenches/through pipes/ducts or on poles XLPE armoured cable of following sizes with aluminum conductor, 11 KV `E’ complete all as specified & directed of follwing sizes:- Note:-Excavation & earth work, sand cushioning, bricks protection & GIpipe where required shall be measured & paid seperately |
| 61 | 95 Sqmm, 3 core |
| 62 | 185 Sqmm, 3 core |
| 63 | M&L for chequered plate 5/6mm thick of required size for cable duct cover as required at site incl cutting & weldingincluding painting with two coats of synthetic enamel paint over acoat of red oxide primer as per existing make complete all as specified and directed |
| 64 | Repair of earth pit including required exacavation, earth work and PCC work to make good damaged/disturbed surfaces of earth pit chamber & making new pit cover of RCC 1:2:4 type B-1 using 20mm graded crushed stone aggregate reinforced and lifting handle on RCC cover with 8mm MS bars at 150mm centre to centre both ways incl supply & fixing of wire mesh and funnel including re-connection of earth wire/strip with panel/transformer using GI nut, bolts & washer complete all as specified & directed. |
| 65 | Supply, installation, testing & commissioning (in replacement) of Gang operated air break switch with drop out fuse unit complete with 12 insulator set, HT 11 KV triple pole, 200 amps current rating complete with drop out fibre glass tube fuse, mechanically operated mechanism from ground level consisting of operating rod of 25mm bore medium grade GI pipe of suitable length with locking arrengment, flat iron clamp 50mm x 6mm including MS channel of suitable size and length for fixing GOD including bolts, nuts and washers including jumper connection with copper flexible designed jumper complete all as specified and directed |
| 66 | M&L for spray painting of old/existing LT/HT panel/VCB any size/type with powder coated paint withsmoke grey paint in outer/inner side of complete panel after cleaning and preparing surface complete all as specified & directed |
| 67 | M&L for replacement of door/ MS sheet of old/ existing LT panel board any type/size with cutting, welding & bend to shape and spray painting with powder coated paint with smoke grey paint in outer/inner side over one coat of primer after complete all as directed. |
| 68 | M&L for replacement of lock assembly with key of old/ existing LT panel board any type/size complete all as directed. |
| 69 | M&L for repair/overhauling of old LT panel board of any size/type, cleaning with compressed air, tightening of all electric connections to bus bar & switchgears, replacement of wornout lugs, nut, bolts, proper connection to main earth lead, glands to be provided/replaced as required at cable entries, fixing of door front & back side with proper locking arrangement, repair to PCC foundation as required at site and spray painting with powder coated paint with smoke grey paint in outer/inner side of panel after cleaning and preparing surface including sign writing as per existing make complete all as specified and directed. |
| 70 | Servicing & overhauling of Air Circuit Breaker (ACB) of any capacity by taking out from existing LT panel, cleaning all parts internally and externally, checking of the proper tension of the springs mechanical mechanism, tightening of connection of moving, fixing contact, floating contacts, servicing of motor & charging system including replacement of faulty parts/spares and re-fixing it on its original position and testing complete all as directed Note:- Spare parts will be measured and paid separately under respective item |
| 71 | Supply only following item/spares for Air Circuit Breaker (ACB) :- |
| 72 | Closing release of air circuit breaker |
| 73 | Shunt release of air circuit breaker |
| 74 | Under voltage release with time relay |
| 75 | S&F in repairs 3 pole Power Contactor, MNX type ofrating 32/40 amp AC3, closing coil 220 volt with auxiliary block (1 NO + 1 NC ) including electric connection in existing panel as per existing make complete all as specified and directed. |
| 76 | S&F (in replacement) Capacitor metalized poly propylene heavy duty (MPP-H) for 3 phase 440 volts & 50 Hz system for permissible non- linear load 15% and connectionin existing APFC panel complete of following capacity:- |
| 77 | 5 KVAR |
| 78 | 10 KVAR |
| 79 | 25 KVAR |
| 80 | M&L (in replacement) danger notice plate of 1.6mm thick mild steel sheet, vitreous enamelled white with letters, figures and conventional skull and bones in signal red colour and fixed with M.S clamps, bolts and nuts of approved size for LT/HT 20 x 15 cm size as per existing make complete all as specified and directed |
| 81 | S&F in replacement following items in the existing panel / location and connection with using aluminum lugs including making necessary alteration in panel/door as required for proper fixing & connection complete all as specified and directed :- |
| 82 | MCB 4 pole 63 amps, 10 KA breaking capacity, B"" Series, 415 Volt |
| 83 | MCB 4 pole 100 amps, 10 KA breaking capacity, B"" Series, 415 Volt |
| 84 | MCCB 3 pole 63 amps, 16 KA breaking capacity, 415 Volt |
| 85 | MCCB 3 Pole 100 amps, 16 KA breaking capacity, 415 Volt |
| 86 | MCCB 3 Pole 125 amps, 25 KA breaking capacity, 415 Volt |
| 87 | MCCB 3 Pole 200 amps, 35 KA breaking capacity, 415 Volt |
| 88 | MCCB 4 Pole 200 amps, 25 KA breaking capacity, 415 Volt |
| 89 | MCCB 4 Pole 250 amps, 35 KA breaking capacity, 415 Volt |
| 90 | Volt meter (0 to 500 volts) digital type, three phase of size 96mm x 96mm |
| 91 | Amp meter (0 to 300 amps) digital type, three phase of size 96mm x 96mm with suitable CTs |
| 92 | Indicator lamp, LED type |
| 93 | Multifunction Meter, digital type, three phase, size 80mm x 80mm, accuracy class 1.0 for monitoring of various electric parameters such as voltage, current, wattage, frequency, power factor etc. Make:- Schneider model No EM 6436H or equivalent in L&T/Siemens Note :- (i) MCCB should be properly fited in existing compartmentand operating handle of MCCB should be proper in opening existing cover/door of compartment of LT panel board. |
| 94 | S&F in replacement lightning arrester, metal oxide type (gap less) for out door use complete with all fittings and fixing arrangements, transmission class, discharge capacity 65 kilo amps, suitable for 11000 volts including brackets, clamps, nuts, bolts, washers and connecting to earth wire 4mm dia GI with manufacturers test certificate complete all as specified & directed |
| 95 | S&F in replacement bracket for street light made out of 40 mm bore GI pipe medium grade not less than 1.2m length bent to shape fixed on pole/wall with and including50mm x 6mm FI clamps = 02 Nos with nut bolts, washers including painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified & directed |
| 96 | M&L in replacement for LED street/security light fittings 60 watt, made up of of pressure die cast aluminium housing with toughned glass and individual high power LEDs with secondary optics, IP 66 protection, clamp type suitable for 32-50mm dia bracket pipe, to be mounted on existing/ new GI bracket and connecting the street light fitting using 1.5 Sqmm PVC insulated copper cable complete all as specified & directed Note: - New GI bracket with clamp shall be measured & paid seperately |
| 97 | M&L for LED Flood Light luminaire, energy saving & enviornmental friendly, long lifediecast aluminium, IP65, with high power LED as light source including necessary fixing arrangement with clamps of suitable size and connectionusing 1.5 Sqmm PVC insulated copper cable complete all as directed for following wattage. |
| 98 | 70 Watt |
| 99 | 100 Watt |
| 100 | M&L for earthing complete with galvanised steel earth plate electrode 600mm x 600mm x 6mm thick directly buried in ground (earth pit not less than 2.25 m deep below ground level) with top edge of earth plate not less than 1.5m below the ground level connected to GI strip 32mm x 6mm by means of bolts nuts check nuts and washers of galvanised iron at 2 points & GI pipe 50mm bore light grade for protection of earthing strip PCC chamber 1:3:6 (type C-1) using 20mm graded crushed stone aggregate, watering pipe 20mm bore light grade,funnel with wire mesh, 50 mm thick cover of RCC 1:2:4 type B-1 using 20mm graded stone aggregate reinforced with 8mm MS bars at 150mm centre to centre both ways and charcoal dust and common salt all as shown in electrical plate No. 3 of MES SSR part-I and including excavation & earth work & connecting the earthing point/equipment and testing complete all as specified & directed |
| 101 | All as per the description of the srl item No 57 but for 4mm GI wire & 20mm bore light grade GI protection pipe. |
| 102 | Supply of HT electric rubber mat sheet of size 1m x 2m x 25mm thick, ISI marked |
| 103 | All as per the description of srl No 59 above but for LT 15mm thick |
| 104 | S&F in repairstime switch, digital type having suitable rating street light timer panel including connection as per existing make complete all as specified and directed |
| 105 | S&F in replacement digital over current relay, single phase, 50 Hz suitable for 11 KV VCB panel, including connection with proper setting and testing complete all as specified and directed. |
| 106 | Disconnecting of electric connection and dismantling the UPS for repair and reassembling & connection after replacemnt of following parts:- |
| 107 | Faulty rectifier charging system including rectifier card, capacitor, diode and rectifier plate etc and programming of cardcomplete all as specified and directed. |
| 108 | Faulty invertor card and programming of new cardcomplete all as specified and directed. |
| 109 | Cleaning and Servicing of UPS 10 KVA, 3 phase 4 wire 415 volt with dusting by blower and tightening of nut bolt, screwscomplete all as specified and directed. |
| 110 | Supply, installation, testing & commissioning LT distribution cubical panel outdoor type, double door with rigid hinges, door handle locking arrangement back side openable, compartmentalized design, mounted on suitable PCC blocks, fabricated out of CRCA sheet 3mm thick, suitably spaced, totally enclosed in chamber for reception of 3 phase, 440 volt, 50 HZ, AC supply including all connection with aluminium strips, internal wiring with suitable size of PVC copper conductor wire with lugs panel shall be effectively PVC gasketed and sealed, glands to be provided at cable entries, powder coated painting and sign writing for in/out going connections and bottom support by MS channel MC-75 grouting in PCC 1:2:4 using 20mm graded crushed stone agreagte height 450mm from ground level complete all as specified and directed and comprising of following |
| 111 | (i) 4 Nos bus bars of high conductivity aluminium alloy (ii) 3 Nos for phase (R,Y,B) rating 300 amp rating and 1 No for neutral rating 150 amp, mounted on DMC support with heat shrink sleeve - 01 set. (iii) MCCB 4 pole, 160 amp, 415 volts, 25 KA - 01 No (Incoming) (iv) MCCB 4 pole, 63 amp, 415 volts, 25 KA - 05 Nos (Outging) (v) Indication lamp (R,Y,B),LED type - One set of three |
| 112 | S&F in repairs AC synchronous motor, 240 volt, single phase, 60 RPM @ 50 Hz, type SS-202 of automatic voltage regulator all as specified and directedcomplete all as specified and directed. |
| 113 | Supply only hand gloves for 11 KV systemas approved by engineer in-charge complete all as specified and directed |
| 114 | Supply only digital clamp metercomplete all as specified and directed. |
| 115 | Taking down carefully copper/aluminium point wiring (light/fan/socket or power) complete including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets etc including making good the disturbed surfaces to match with the existingcomplete all as specified and directed. |
| 116 | Taking down unserviceable main switches, DBs including MCBs, bus bars chambers etc from wall / existing main boards and removing from sitecomplete all as specified and directed. |
| 117 | M&L for point wiring with single core FRLS, PVC insulated, unsheathed multi stranded copper conductor of size 1.5 sqmm alongwith 1.5 sqmm earth wire of multi strand copper conductor (with same specification) drawing through existing conduit pipe including replacement of sunk zinc coated pressed steel terminal box of 1.60mm thick with 3mm thick plastic laminated sheet top cover, brass screws, cup washers etc and making good to the disturbed surfaces to match the existing complete for the following :- |
| 118 | One light point controlled by one switch |
| 119 | Oneceiling fan/exhaust fan point controlled by one switch |
| 120 | One socket outlet 5 Amps controlled by one switch on same board |
| 121 | One socket outlet 5 Amps controlled by one switch on independent board |
| 122 | One bell point controlled by one bell push switch |
| 123 | All as per the description of srl item No 70 above but wiring with 2.5sqmm copper wire and 1.5sqmm earth wire for socket out let 16 Amps on independent board |
| 124 | All as per the description of srl item No above but wiring with 4 sqmm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16/20 Amps point and one single core 2.5 sqmm PVC insulated unsheathed copper cable as earth continuity conductor |
| 125 | M&L for point wiring concealed type with 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed FRLS copper conductor cable including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, 1100 Volts grade, multi-stranded, PVC insulated, unsheathed, FRLS copper conductor cable connected to common earth and earth dolly with suitable copper lugs drawing into and including rigid non-metallic PVC surface conduit of 20mm dia or higher, medium grade complete with all PVC conduit accessories, GI metal flush box of 1.60 mm thick suitable for modular/conventional switches/sockets/fan regulators with cover plates (modular/ conventional type as required), blanking plates, brass screws, cup washers etc including all cutting / chases etc in walls and making good to the disturbed surfaces to match the existing complete all as specified and directed for the followings :- |
| 126 | One light point controlled by one switch |
| 127 | Oneceiling fan/exhaust fan point controlled by one switch |
| 128 | One socket outlet 5 Amps controlled by one switch on same board |
| 129 | One socket outlet 5 Amps controlled by one switch on independent board |
| 130 | One bell point controlled by one bell push switch |
| 131 | All as per the description of the srl item No 73 above but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 16 Amps socket outlet point on independent board with 1.5 Sqmm nominal cross sectional area copper conductor cable asearth continuity conductor. |
| 132 | All as per the description of the srl item No 73 above but wiring with 4 sq mm PVC insulated multi-stranded copper conductor for industrial socket outlet 3 pin 16 / 20 Amps point and one single core 2.5 sq mm PVC insulated unsheathed copper cable as earth continuity conductor |
| 133 | S&F switch piano flush type 5/6 Amps single pole one way230 Volts complete |
| 134 | S&F switch piano flush type 15/16 A single pole one way 230 Volts complete |
| 135 | S&F socket outlet 2 in 1, 3 pin 5 Ampsflush type 230 Volt complete |
| 136 | S&F socket outlet 2 in 1,3/6 pin 5 and 15 Amp flush type 230 Volts complete |
| 137 | S/F bell push, flush type 5 Amps 230 Volts complete |
| 138 | S&F electronic fan step regulator flush switch type 100/120 watt, 230 Volt complete |
| 139 | S&F ding dong bell, AC, 230 volts, single pole complete |
| 140 | S&F lamp holder, 230 volt AC, PVC / Polycarbonate type with back plate suitable for batten fitting including 9 watt LED bulbcomplete all as specified & directed |
| 141 | S&F ceiling rose, 6 Amps, 250 volts, ACwith three terminals and PVC / Polycarbonate insulated body of 50 x 25mm sizecomplete all as specified & directed |
| 142 | S&F modular switch 6/10 Amps, one way, one module 240 volts complete all as specified & directed |
| 143 | S&F modular socket, 3 pin 6 Amps,240 volts, 2 module complete all as specified & directed |
| 144 | S&F modular switch 16 A, 1 module,240 volts complete all as specified & directed |
| 145 | S&F modular socket 6/16 A, 5 pin, 2 module, 240 volts complete all as specified & directed |
| 146 | S&F modular Bell push 6 Amps, one module 240 volts complete all as specified & directed |
| 147 | S&F modular fan regulator, step type, 120 W, humfree, AC, 230 volts, 2 module complete all as specified & directed |
| 148 | S&F sheet metal enclosure with Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amps "C" curve, 240 Volt complete |
| 149 | M&L in repairs for two single core (submain) PVC insulated cable with 4 sqmm nominal cross sectional area stranded copper conductor and one single core green PVC insulated 4 sqmm stranded copper conductor earth continuity cable drawn through non metallic rigid PVC conduit 20mm dia or higher size, concealed in wall including all conduit and fixing accessories including cutting chases & making disturbed surfaces complete all as specified & directed |
| 150 | All as per the description of the srl item No 92 but with 6 sqmm and 6 sqmm as earth wire |
| 151 | S&F MCB DB, single pole and neutralwith 200 Amps rated bus bar, 230 volts, glazed,double door type, IP-43,including connecting all connections of wire to MCBs with proper lugs & making good to the disturbed surface complete for the following no of way :- |
| 152 | 4 way |
| 153 | 8 way |
| 154 | 12 way |
| 155 | S&F loadline distribution box 4 way, AC, TP & neutral metal enclosure, Glazed double dooor, 415 V, AC, IP-43, concealed type with suitable bus bar, neutral link, earth link suitable for MCCB63/100 Amps as incomer and MCB SP as out going complete all as directed |
| 156 | S&F MCB DP/SPN, 240 Volts, AC of breaking capacity 10 KA,"C" curve and connections by using suitable copper lugs complete of following rating :- |
| 157 | 63 Amps |
| 158 | 40 Amps |
| 159 | S&F MCB SP, 240 Volts, AC, 6 to 32 amps, breaking capacity 10 KA, "C" curve and connection by using suitable copper lugs complete all as specified & directed |
| 160 | S&F MCCB 3 Pole, 415 volt, AC, fixed type, with breaking capacity 16 KA suitable for load line DB & connection complete of following rating :- |
| 161 | 63 Amps rating |
| 162 | 100 Amps rating |
| 163 | Supplying and laying in replacement or fixing or passing through pipe, 1100 volts gradePVC insulated aluminium stranded conductor cable served with inner sheathing of PVC tape and overall PVC sheathed in service connections one twin core cable flat or circular for the following size of cables :- |
| 164 | 16 Sqmm |
| 165 | 10 Sqmm |
| 166 | S&F in repairs of switch piano, flush type, 5/6 Amp, single pole, one way, 230 volts complete all as specified & directed |
| 167 | S&F in repairs of socket outlet 2 in 1, 3 pin, 5/6 Amp, flush type, 230 volts complete all as specified & directed |
| 168 | S&F in repairs of switch piano flush type 15/16 Amp, single pole, one way, 230 volts complete all as specified & directed |
| 169 | S&F in repairs of socket outlet 2 in 1, 3/6 pin 5 and 15 Amp, flush type, 230 volts complete all as specified & directed |
| 170 | S&F in repairs of Bell Push, flush type, 6 Amp, 230 Volts complete all as specified & directed |
| 171 | S&F in repairs electronic fan step regulatorswitch fiush type 120 watt, 230 Volt complete all as specified & directed |
| 172 | S&F in repairs of modular switch 10 amps single pole one module, 230 volts complete all as specified & directed |
| 173 | S&F in repairs of universal moudlar socket ,10 Amps, 5 pin, 2 module, 230 volts complete all as specified & directed |
| 174 | S&F in repair of modular switch 16/20 amps single pole one module, 230 volts complete all as specified & directed |
| 175 | S&F in repairs of modular socket 16/20 amps, 2 module, 230 volts complete all as specified & directed |
| 176 | S&F in repairs of modular bell push with indicator 6 amps, one module complete all as specified & directed |
| 177 | S&F in repairs of modular fan step regulator 120 watt 2 module , 230 volts complete all as specified & directed |
| 178 | S&F in repairs LED Bulkhead luminaire 10 watt of polycarbonate housing and enclosed with acrylic diffuser IP-65 protection incl connection complete all as specified & directed |
| 179 | S&F in repairs LED Post top lantern luminaire with die cast aluminium spigot, lid cover and clear acrylic cover 40 watt, 5700 K with IP-65 protection including connection complete all as specified & directed |
| 180 | S&F in repairswall mountedLED batten with aluminium housing and integrated electronic drive18/20 watt fixture 4 feet provided for efficient heat dissipation with polycorbonate diffuser and integrated electronic driver and all accessories pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified & directed |
| 181 | S&F in repairs surface and wall mounted LED batten 10 watt 2 feet longextruded aluminium housing provided for efficient heat dessipation with polycarbonate diffusser and integrated electronic drive, pre-wired including connecting up with twin core flat flexible copper conductor cable of suitable size complete all as specified & directed |
| 182 | S&F in repairs wall mounting bracket decorative luminaire powder coated housing, SS finish fixture with opal glass diffuser suitable for GLS, B-22 lamp including connection complete all as specified & directed |
| 183 | S&F in repairs highly efficient round shape downlighter 25 watt, 240 volt, CCT 5700 K with driver suitable for ceiling cutout 225 mm dia incl connection complete all as specified & directed |
| 184 | S&F (in replacement) LED landscape bollard light 10 watt, 230 volt, inverted pyramid tripod type with soft 360 degree distribution, IP-65 protection, including necessary civil work for grouting & foundation work of suitable size with PCC work complete all as specified and directed. |
| 185 | S&F in repairs 5 W LED T5 TL fitting (1ft) attractive wall mounted type suitable for mirror fittings, all accessories pre wired including up with twin core flat flexible copper conductor cable of suitable size complete all as specified and as directed. |
| 186 | S&F in repairs surface/ceiling mounted LED panel type of size 2ft x 2ft, 36W, 230V, 5700K complete with driver full window glarefree opal diffuser LED panel with CRCA powder coated white housing complete with all accessories required for connection and making good the disturbed ceiling complete all as specified & directed |
| 187 | S&F in repairs LED energy efficientflood lightof 30 watt, 230 volt,anti glare diffuser ,IP-65 incl connection complete all as specified & directed. |
| 188 | S&F in repairsexhaust fan 300 mm sweep, 230V, AC, steel body with louver shutter etc complete and connection from ceiling rose to fan terminal incl cutting of hole at wall for required size and making good disturbed surface and depositing old fan to store yard complete all as specified & directed |
| 189 | S&F in repairs wall mounting fan 400 mm sweep, adjustable, plastic blade grill for protection, pull cord control for speed and oscillation on-off, ABS body incl connection and depositing old fan to store yard complete all as specified & directed |
| 190 | S&F in repairs PVC flexible twin twisted copper conductor cable multi strand of size 0.5 sqmm nominal cross section complete all as specified & directed |
| 191 | S&F electronic energy meter, current rating 10-60 amps, 240 Volt, AC, single phase, 2 Wire, accuracy Class 1.0, with LCD display including fitted with temper proof meter box, weather proof, transparent, made out of FR polycarbonate, dust proof, good mechanical strength conforming to IS: 14772/2000, IP-65, size not less than 260mm x 190mm x 120mm including connection and depositing old meter to MES store complete all as specified & directed |
| 192 | Taking down carefully electric geyser of any type and capacity bydisconnecting electric and water supply connection, opening nut, bolt, washer and reassembling after cleaning and replacing defective parts and re-installing the same in original position and making necessary electric and water supply connection and testing complete all as specified and directed. Note:- Spare items shall be measured and paid seperately |
| 193 | S&F geyser inner water tank 35/50Ltrs capacity steel body as per sample, duly tested complete all as specified and directed. |
| 194 | All as per the description of the srl item No 127 but 25 Ltrs capacity |
| 195 | S&F heating element capacity 1.5 KW (Round/Triangular) ISI marked suitable for geyser (as per sample) complete all as specified & directed Make:- As per sample/ make as per existing geyser |
| 196 | All as per the description of the srl item No 129but capacity 2 KW |
| 197 | S&F thermostat suitable for 50/35/25 ltrs capacity geysers (Make :- as per sample/ make of existing geyser) |
| 198 | S&F Heavy duty hot water connection, SS rope threaded type with brassunions at both ends, 45cm long 15mm bore complete |
| 199 | S&F indicator lamp, Red/Green suitable for geyser of any type/capacity (Make as per sample) |
| 200 | S&F geyser base plate assembly of any type(having 6 or 9 hole) any model all as specified and directed complete (Make as per sample) |
| 201 | S&F in replacement of outer cover MS sheet/ABS body of geysers 25 to 50 Ltrs capacity complete all as specified and directed |
| 202 | S&F in repairs plug top, 3 pin, 05 amps, 230 volt complete all as specified and directed . |
| 203 | S&F in repairs plug top, 3 pin, 15 amps, 230 volt complete all as specified and directed . |
| 204 | S&F in repairs PVC insulated and sheathed flexible cable 3 core Multi-stranded copper conductor size 2.5 Sqmm 1100 volt grade after taking out old unserviceable one including electric connection complete all as specified and directed. |
| 205 | M&L for dismantling of unserviceable ceiling fan of any make/model/sweep, cutting and removing the old defective/burnt winding, cleaning the core of fan motor and rewinding the fan motor with super enamelled copper winding wire of same gauge with insulating material and varnishing the core assembly, drying the moisture content to get appropricate speed and re-assemble the same complete all as directed Note:- The cost of copper winding wire is deemed to be included in the quoted rate |
| 206 | All as per the description of the srl item No 139 but for exhaust fan upto 300mm sweep size |
| 207 | All as per the description of the srl item No 139 but for exhaust fan of 380/450mm sweep size |
| 208 | S&F in repairs capacitor 2.5/3.15 MFD suitable for C/fan incl connection complete all as specified and directed |
| 209 | S&F in repairs pedestal fan 500 mm sweep with strong copper wound motor for better air delievery, smooth oscillation, superior low voltage performance, heavy base for stability, 3 speed control regulator, speed not less than 1400 RPM and old to be deposited in store yard complete all as specified and directed |
| 210 | M&L in repair ball bearing suitable for any type/size/make of fan complete all as specified and directed |
| 211 | S&F in repairs of highly efficient recessed mounted round shape downlight 5 watt, 230 volts, clear white light, CCT 6000K with driver incl connection complete all as specified and directed |
| 212 | S&F in repairs decorative gate light made up of high grade unbreakable polycarbonate material suitable for & alongwith 10 watt LED bulb with B22 base complete all as specified and directed |
| 213 | S&F in repairs factory made metallic louvers shutter duly painted complete all as specified and as directed for following size of exhaust fan:- |
| 214 | 300mm sweep |
| 215 | 450mm sweep |
| 216 | S&F in repairs factory made ceiling fan down rod made out of heavy duty MS conduit pipe of 15mm dia duly with powder coat painted hole at both ends for passing cable/nut and cut at one end for fixing of fan shaft including nut bolt complete all as specified for the following sizes :- |
| 217 | 30cm |
| 218 | 60cm |
| 219 | 90cm |
| 220 | 120cm |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
