Tender For General-Rkvy- 2020-21-Installation Of Piped Conveyance System For Irrigation In Paddy At Madakkathara Panchayath, Ollukkara Block, Thrissur-General Civil Work
Tender Value
Ref. Documents
Estimated cost
Bid Submission
17 Dec 2022
0 days left
EMD
15828
Bank guarantee accepted
Document Fee
1400
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mannuthy → Kerala
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
General-Rkvy- 2020-21-Installation Of Piped Conveyance System For Irrigation In Paddy At Madakkathara Panchayath, Ollukkara Block, Thrissur-General Civil Work Construction Of Pump House, Installation Of Pump Set, Installation Of Hdpe Pipe Line
BOQ
| Sl. No. | Item Description |
| 1 | Construction of Pump House & Sump at Akkarappuaram Chira, Madakkathara |
| 2 | OD1129/2022-2023:Bailing out water Using 5HP Pump- Bailing out water with 5HP engine and pump set including conveyance to site and erection, cost of fuel, lubrication oil and other stores, pay of staff etc. complete |
| 3 | OD1130/2022-2023:RING BUND Type II Putting up ring bund with earth fille gunny bags of top width 1.0m bottom width 2.0m height 2.0 m side and filling in between with earth to form ring bund and maintaining the same leak proof till the completion of the work and clearing the site by dismantling the bund after completion of the work etc. complete. |
| 4 | 2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 5 | 2.8.1:Earth work in excavation by mechanical means (Hydraulic excavator) /manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift up to 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.All kinds of soil |
| 6 | 2.26.1:Extra for every additional lift 1.5 m or part there of in excavation / banking excavated or stacked materials.All kinds of soil |
| 7 | 4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) |
| 8 | 50.6.1.4:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete |
| 9 | 50.2.25.1:Filling with contractor's own earth ( excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift up to 1.5 m as per direction of site Engineer-in-charge |
| 10 | 4.1.5:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) |
| 11 | 50.6.1.5:Solid block masonry using pre cast solid blocks ( Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 Part I of 1979 for super structure up to floor two level thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand) etc complete |
| 12 | 5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) |
| 13 | 5.9.5:Centering and shuttering including strutting, etc. and removal of form for:Lintels, beams, plinth beams, girders bressumers and cantilevers |
| 14 | 5.9.3:Centering and shuttering including strutting, etc. and removal of form for:Suspended floors, roofs, landings, balconies and access platform |
| 15 | 5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more |
| 16 | 13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) |
| 17 | 50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete |
| 18 | 13.46.1:Finishing walls with Acrylic Smooth exterior paint of required shade:New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 19 | 10.25.2:Item Shifted to Sub head 14 as item 14.73Item Shifted to head 14 as item 14.74Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works |
| 20 | 13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work |
| 21 | OD1082/2022-2023:Supply and Installation of ready madeconcrete ring of diameter 1.5m and depth 0.45m |
| 22 | Supplying & Laying HDPE Pipe Conveyance |
| 23 | 2.32:Clearing grass and removal of the rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 24 | OD1080/2022-2023:Supply of PE Pipe, PE100, PN8, 200mm dia, conforming to IS 4984/2016. 100.98.140 |
| 25 | OD1081/2022-2023:Laying HDPE pipes (IS : 4984)on land portion including conveying within initial lead and aligning the pipes, electro-fusion welding using automatic or semi automatic electrofusion machines, testing the pipe line thus fabricated to suit the hydrulic working pressure and after testing , aligning the pipeline, lowering the pipe in position into the trenches already made, testing the line to suitable pressure with potable water before back filling and leveling the trenches including all labour charge, hire for appliances etc. complete but excluding cost of pipe and fittings.200 mm OD HDPE pipeNEW DATA 100.10.7 |
| 26 | Supply & Installation of Pumps |
| 27 | OD1137/2022-2023:Supply of Three Phase 7.5KW/10HP or nearest available power slow speed (Less Than 1500 rpm) monobloc pump of reputed make, suction pipe size 150mm and delivery size 150mm, suitable for 6 to 14 meter head and 72.5 to 30 LPS discharge respectively (Kirloskar/ Crompton/ KSB) |
| 28 | OD1138/2022-2023:Supply of Reputed make 0.75KW/1HP Monobloc Vaccum Pump Model, Suction Diameter 20mm X Delivery Diameter 20mm, suitable for above Monobloc Pump. Vacuum 100-600 mm of Mercury. |
| 29 | OD1176/2022-2023:Supply and Installation Cubicle Type Industrial panel board of reputed make neatly painted comprising 32A TPN SF (HRC 25 A), ELCB (25A, 100mA, 400 V, 3 Phase)with enclosure, Phase indication lamps (LED R-Y-B Colours), 3 Numbers MCB (2A, 240 V, Single Pole), 1 No Volt Meter (0-500 V), Volt meter selector switch, 3 Nos Ammeter (0-50 A), 3 Nos 50/5A Metering type Current Transformer, 1 No Static capacitor (4kVAr, 3 Phase, 415 V), 1 No Single Phase Preventer, 1 No Dry Run Preventer, Fully Automatic Star-Delta Starter suitable for 10 hp 3 Phase 415 V pump etc. complete with all necessary wiring including one 15A plug socket and one light point including all accessories like PVC insulated FRLS Single Core Copper Conductor wire 6 Sqmm, 25 mm Medium Gauge rigid PVC conduit pipe with specials, as per the KSEB and Electrical Inspectorate Regulations. (L&T/Legrand/Havells) |
| 30 | OD1175/2022-2023:Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 31 | OD1139/2022-2023:Supplying 150 mm Flexible Hose |
| 32 | OD1140/2022-2023:Supplying 150 mm Foot Valve |
| 33 | OD1154/2022-2023:Supply of Long Bend 150 mm |
| 34 | OD1155/2022-2023:Supplying Hose Collar |
| 35 | OD1156/2022-2023:Supplying 150 mm Coupling |
| 36 | OD1157/2022-2023:Supplying Hose Clip 150 mm |
AI Tender Summary
Tender Timeline
Dec 09, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 17, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 19, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender