Tender For Modernization And Renovation Of Gates And Regulator Structure Of Head Regulator Of First Patiala Feeder At Manpur Head For Preparation Of Installation Of Scada System
Tender Value
39.88 Lakhs
Estimated cost
Bid Submission
19 Dec 2022
0 days left
EMD
79767
Bank guarantee accepted
Document Fee
5000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
doraha → Punjab
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Modernization And Renovation Of Gates And Regulator Structure Of Head Regulator Of First Patiala Feeder At Manpur Head For Preparation Of Installation Of Scada System
BOQ
| Sl. No. | Item Description |
| 1 | Steel casting as per IS specifications & grade complete in all respects and to entire satisfaction of engineer incharge Alloy Steel Casting |
| 2 | Machining and Finishing of any part to desired shape and size , complete in all respects and to entire satisfaction of engineer incharge |
| 3 | Drilling/ Boring including Reaming complete in all respects & to entire satisfaction of engineer incharge. above 50 mm dia |
| 4 | Drilling/ Boring including Reaming complete in all respects & to entire satisfaction of engineer incharge. above 10 - 20 mm dia |
| 5 | Anealling Heat Treatment of steel in all respect and to entire satisfacion of engineer incharge |
| 6 | Providing Gun Metal Bush |
| 7 | Removing Assembling and fixing in position of GM bush complete in all respect and to entire satisfaction of engineer in charge |
| 8 | Steel forging as per IS specification and grade , complete in all respects and to entire satisfaction of engineer incharge. EN-8 |
| 9 | Removing and Fixing of roller pin In position complete in all respects and to entire satisfaction of engineer in-charge. (upto 75 mm/ above 75 mm) |
| 10 | Supply of 8 mm MS plate |
| 11 | Cutting and Staightening Charges complete in all respects and to entire satisfaction of engineer incharge |
| 12 | Preperation of surface for fixing new skin plate with new old skin plate complete in all respects and to entire satisfaction of engineer in charge |
| 13 | Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of enginer incharge 10 mm wide |
| 14 | Crane Charges for dismantling , loading/ unloading and refitting of gates at site(35 T) |
| 15 | Supply of rod 40 mm dia |
| 16 | Supply of rod 45 mm dia |
| 17 | Supply of rod 65 mm dia |
| 18 | Supply of rod 60 mm dia |
| 19 | Threading for pins complete in all respects and to entire satisfaction of engineer incharge upto 75 mm |
| 20 | Teeth cutting for gear wheel complete in all repects and to entire satisfaction of engineer-in-charge. 6 dp |
| 21 | Teeth cutting for gear wheel complete in all repects and to entire satisfaction of engineer-in-charge.12 dp |
| 22 | Supply of Chequered Plate 6mm thick |
| 23 | Supply ofChannel 150 x 75 x 6 |
| 24 | Supply of MS Flats 75 x 8 |
| 25 | Providing of hollow bulb seal 100x44 mmand fixing in position including preparation of surface complete in all repects |
| 26 | Removing damaged old rubber seal blub or flat including clamp plate of all sizes and Types. |
| 27 | Providing and fixing galvanized nuts and bolts of all sizes and lengths required |
| 28 | Supply of I-section beam of size 150 x 80 mm |
| 29 | Removing, Providing & fixing S.S Flat, complete in all respects. (Grade 304) Plate 10mm |
| 30 | Supply of Anchor Bolts Dia 16 mm |
| 31 | Removing Damaged structural steel and stacking clear from working space by gas cutting complete in all respects and to entire satisfaction of engineer incharge |
| 32 | Commissioning and testing of Gates at site complete in all repects and to entire satisfaction of engineer-in-charge |
| 33 | Burning old paint with blow lamp |
| 34 | Scraping brushing to remove paint to base metal surface |
| 35 | Paintng two coats with anti corrosive bitumastic paint to give an even shade with speacial quality paint |
| 36 | Paintng two or more coats excluding priming coat with synthetic enamel paint in all shade wood metallic or plasted conrete surface to give an even shade. |
| 37 | Applying Priming Coats with metal primer on new steel or iron work i/c prepration of surface |
| 38 | Supply of Multipurpose Grease |
| 39 | Supply of Multigrade Mobile oil 10w- 40 or 10w-50 |
| 40 | Providing Advanced direction Sign Board 1200x900 mm rectangular as per IRC 67-2012 with retro reflective high intensity grade sheeting fixed over 2 mm thick alm sheet with 25x25x3mm angle complete in all respect. |
| 41 | Zigs and fixture,gas tools and plants, racking and haulage arrangements for replacing damaged and broken parts including carriage and other miscellaneous itemscomplete in all respects to entire satisfaction of engineer-in-charge. |
| 42 | Supply & fixing of MS cover for rope drum including cost of hinges & lifting hooks including labour charges. |
| 43 | Miscellaneous minor repairs of Items Such as M.S Flats, ISA, ISMC, ISMB etc. to make gates operational including labour charges. |
| 44 | Mechanical coupling of Electric motor mechanism including reduction gear with existing gate mechanism complete in all aspects.Rack & Pinionm system |
| 45 | Removing, Providing, & fixing Bearing bracket, complete in all respects. |
| 46 | Removing & fixing Bearing, complete in all respects. |
| 47 | Providing LED Light of standard reputed company with minimum 2 year warranty (20 watt) |
| 48 | Plumber block as per list and make SKF , NBC |
| 49 | Supply of Plate 12 mm |
| 50 | Providing and fixing Flexible coupling |
| 51 | Providing and fixing Dog clutch |
| 52 | PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1sq.mm (Un-sheathed) (within panels) |
| 53 | PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 1.5sq.mm (Un-sheathed) (within panels) |
| 54 | PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 2.5sq.mm (Un-sheathed) (within panels) |
| 55 | PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 4sq.mm (Un-sheathed) (within panels) |
| 56 | PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 6sq.mm (Un-sheathed) for induction brakes |
| 57 | PVC INSULATED FR COPPER CONDUCTOR CABLES:Supply and erection of PVC insulated FR single core Unsheathed copper conductor cable (ISI marked) suitable upto 1100 volts grade confirm to IS:694/1990 left bare in pipe or casing of suitable size complete in all respect as desired by the Engineer-in-charge:- Overall size 10 sq.mm (Un-sheathed) for coupling/ berm |
| 58 | Supply and erection of PVC insulatedPVC sheathed FR (2Core) round flexiblewire with copper conductor cable (ISImarked) confirm to IS:694/1990 left barein pipe or on surface with cleats ofsuitable size complete in all respect asdesired by the Engineer-in-charge:- Overall size 1.5sq.mm (48/0.20mm), 2Core ( For MCB ) |
| 59 | Supply and erection of PVC insulatedPVC sheathed FR (2Core) round flexiblewire with copper conductor cable (ISImarked) confirm to IS:694/1990 left barein pipe or on surface with cleats ofsuitable size complete in all respect asdesired by the Engineer-in-charge:- Overall size 2.5sq.mm (50/0.25mm), 2Core ( For MCB ) |
| 60 | XLPE INSULATED ARMOURED CABLES (LOOSE):Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- Overall size 10sq.mm (2Core) Armoured(Loose) (for motor to motor connection) |
| 61 | XLPE INSULATED ARMOURED CABLES (LOOSE):Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- Overall size 25sq.mm (4Core) Armoured (Loose) (for Connection from Main Line considering parallel connection) |
| 62 | XLPE INSULATED ARMOURED CABLES (LOOSE):Supply, laying and erection of aluminium conductor XLPE insulated PVC sheathed armoured and served cable 1100 volts grade as per IS:7098 (Part-1)1988 to be laid loose in the existing trench or pipe as per PWD General Specifications:- Overall size 35sq.mm (4Core) Armoured(Loose) (for Connection from Transformer) |
| 63 | G.I. EARTHING WIRE/ ROPE (AS ADDITIONAL LENGTH):Bonding to existing earth with 8 S.W.G.(4mm dia) G.I. wire fixed with stapples onwall. |
| 64 | SUPPLY AND ERECTION OF WIRINGACCESSORIES: Supply and erection of switches, socketsand other accessories (flush piano type/modular accessories) in the existingbakelite/ modular cover frame includingfixing & connections and petty materialetc:- Modular Motor Starter 25Amp. (TwoModule) |
| 65 | BAKELITE SHEET: Supply and erection of brown bakelite sheetwhite glazed translucent backside painted3mm thick (thickness not less than 3mm)on the existing metal box including cutting,fixing and connection of existing switchesand sockets and other petty material etc. |
| 66 | MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Double Pole 6-32amp. (10kA, Curve-C) |
| 67 | MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Double Pole 50, 63amp. (10kA, Curve-C) |
| 68 | MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Single Pole 0.5-4amp. (10kA, CurveC) |
| 69 | MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Triple Pole 6-32amp. (10kA, Curve-C) |
| 70 | MINIATURE CIRCUIT BREAKERS:Supply and erection of Miniature Circuit Breaker MCB\"s for circuit protection against overload and short circuit current fault suitable for 240/ 415 volts 50cycles AC supply with breaking capacity of 10kA, Curve-C and low watt losses as per IS/IEC 60898-1, energy limitation class-3, true contact indication, label holder facility in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- MCB Four Pole 50, 63amp. (10kA, Curve-C) |
| 71 | RCBO\"s:Supply and erection of RCBO (Residual Current Breaker Overload) for Earth leakage, overload and short circuit protection suitable for 240/415 volts 50 cycles AC supply with breaking capacity of 10kA as per IEC 61009 in the existing MCB distribution board as per PWD General Specifications including connections with suitable size of thimbles/lugs:- RCBO Four Pole 16/25amp., Sensitivity30mA |
| 72 | Supply and erection of Porcelain FuseUnit with Extension Strip on existingsurface with G.I. bolts & nuts/ rag boltsand nuts etc., including connectionswith suitable size of thimbles andbonding to the existing earth as Per PWDGeneral Specifications :- Porcelain Fuse Unit 32Amp., 415volts |
| 73 | Supply and erection of Porcelain FuseUnit with Extension Strip on existingsurface with G.I. bolts & nuts/ rag boltsand nuts etc., including connectionswith suitable size of thimbles andbonding to the existing earth as Per PWDGeneral Specifications :- Porcelain Fuse Unit 100Amp., 415volts withExtension Strip |
| 74 | MCCB\"s (FOR PANELS & SHEET ENCLOSURE): Supply and erection of Moulded Case Circuit Breaker (Panel mounting Cubicaltype) in the existing Cubical Panel (confirm to IEC:60947-2) having Ics=100Icu, 100% neutral with spreader terminal links, Extended rotaryhandle and relevant PWD general specifications complete with G.I. Bolts, Nuts & Connection on both sides of MCCB with suitable size of thimbles etc:- MCCB Four Pole 125amp., 415volts, =25kAFixed Magnetic and Adjustable ThermalSetting |
| 75 | MS CHANNELS/ FLATS: Supply and Erection of MS angle iron(Channel)/ MS Flats of suitable size withcutting, bending and necessary holes asdesired by Engineer-in-charge at site:- MS flat iron size 40mm x 5mm thick |
| 76 | Supply and erection of heavy dutyaluminium thimbles/lugs for cable endtermination duly crimped includingmaking necessary connectionscompletely:- Aluminium thimble cable Core size 4-6 sq.mm |
| 77 | Supply and erection of heavy dutyaluminium thimbles/lugs for cable endtermination duly crimped includingmaking necessary connectionscompletely:- Aluminium thimble cable Core size 25 - 35sq.mm |
| 78 | Supply and erection of heavy dutyCopper thimbles/lugs for cable endtermination duly crimped includingmaking necessary connections etc.completely:- Copper thimble cable Core size 25 -35sq.mm |
| 79 | Nuts & Bolts of all sizes and length required |
| 80 | Providing, installation & fixing in position of Limit Switches 30 Amp capacity H.D. At site complete in all respects and to entire satisfaction of engineer-in-charge |
| 81 | Providing, installation & fixing in position of LC1D Contactor 32 Amp at site complete in all respects and to entire satisfaction of engineer-in-charge |
| 82 | Designing, Supply, Erection, Testing &commissioning of indoor Type LT cubical panel enclosure (dust, vermin and interchangeable modules with facilites for extensions or reduction as per the space or requirments). The Panel shall be suitable for operation at 415+6% Volts, 50HZ, 3 phase 4 wire & earth system. The assembly manufacturer should be ISO approved and CPRI tested for short circuit of (minimum 50kA) as well as IP degree of protection (IP 54/55). Fabrication:- Panel shall be made from 14/16 SWG CRCA sheet, conforming to IS 8623/1977-82. The sheet metal used for the fabrication of controlpanel will be 2mm for load bearing member’s door and fittings plates etc. the partitions and other non load bearing members will be fabricated out of 1.6mm sheet, the sheet will be of mild steel CRCAtype. The base channel will be made out of 75 x 40 x 5mm rolled channel (iii) LT Panel enclosure having space for 1No.Incomer MCCB 250Amp. and 6Nos.outgoing MCCB\"s 40amp. to 125amp.according to the requirement at site(Approx. size 1300 x 1650 x 400mm) |
| 83 | Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III &HDPE pipes (ISI marked) as perIS:4984:1995 for wiring purposesincluding bends, junction boxes, Steelhooks, M.S. saddle clamps and otherpetty materials etc., as per PWD GeneralSpecifications:- (a) Heavy Gauge PVC Conduit Pipe 20mm dia.(On Surface) |
| 84 | Supply & erection of PVC Conduit Pipes (ISI marked) as per IS9537:Part-III &HDPE pipes (ISI marked) as perIS:4984:1995 for wiring purposesincluding bends, junction boxes, Steelhooks, M.S. saddle clamps and otherpetty materials etc., as per PWD GeneralSpecifications:- (d) Heavy Gauge PVC Conduit Pipe 40mm dia. (On Surface) dia.(On Surface) |
| 85 | Painting of Galvanized iron pipe poleincluding bracket with two coats ofaluminium paint (With brush):- (b) Overall Length 6.1 Metre |
| 86 | Painting of G.I./ Conduit pipes with twocoats of approved paint (With brush)including cleaning the surface etc.:- (a) Painting of G.I. Pipe 15mm and ConduitPipe 20mm dia. |
| 87 | Painting of G.I./ Conduit pipes with twocoats of approved paint (With brush)including cleaning the surface etc.:- (d) Painting of G.I. Pipe 32mm and ConduitPipe 40mm dia. |
| 88 | Supply and erection of PVC flexible pipecomplete without compression glands,locking arrangement, check-nuts asrequired:- (a) PVC Flexible Pipe 20mm dia. |
| 89 | Supply and erection of MS perforatedcable tray (MS Sheet thickness 2mm)with DA gray paint on the existingsurface with the help of MS angle ironsupport (to be painted with approvedpaint) of size 50mm x 50mm x 6mm thickto be fixed with fastners/ nut & bolts etc.,complete in all respect as desired by theEngineer-in-charge and as per PWDGeneral Specifications:- (i) Cable Tray Size 150mm x 50mm x 50mm (2mm thick) |
| 90 | Supply and erection of MS perforatedcable tray (MS Sheet thickness 2mm)with DA gray paint on the existingsurface with the help of MS angle ironsupport (to be painted with approvedpaint) of size 50mm x 50mm x 6mm thickto be fixed with fastners/ nut & bolts etc.,complete in all respect as desired by theEngineer-in-charge and as per PWDGeneral Specifications:- (ii) Cable Tray Size 300mm x 50mm x 50mm (2mm thick) |
| 91 | Supply of 0.75 KW (1 HP ) motor including EM Brake integral with with gearbox assembly mounted with torque of 241 Nm at 28.8 rpm at gearbox output shaft. Standard Motor consists of 3 dia , Squirrel cage , 415 V +/- 10% , 50 Hz +/- 5% , TEFC IP55 , SI duty , Amb Temp 50 degree , F class Insulation limited to B class (OEM Specs) |
| 92 | Supply and installation of VFD ( Variable frequency drive )for 1 HP motor |
| 93 | 12 Watt WHITE-LED BASED SOLAR STREET LIGHTING SYSTEM With 30 Ah Battery Capacity |
AI Tender Summary
Tender Timeline
Dec 09, 2022
11:30 IST
Tender Published
Tender notice published.
CompletedDec 19, 2022
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedDec 19, 2022
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender