}

Tender For Special Repair To Internal Roads At Ghunghora Grn Under Age B/R-I Of Ge Dehradeun, dehradun-Uttarakhand

Military Engineer Services-MES has published Tender For Special Repair To Internal Roads At Ghunghora Grn Under Age B/R-I Of Ge Dehradeun. Submission Date for this Tender is 05-01-2023. Road Work Tenders in dehradun Uttarakhand. Bidders can get complete Tender details and download the document.




Tender Notice

35195544
Corrigendum : Tender For Special Repair To Internal Roads At Ghunghora Grn Under Age B/R-I Of Ge Dehradeun
Open Tender
Indian
Uttarakhand
dehradun
05-01-2023

Tender Details

Special Repair To Internal Roads At Ghunghora Grn Under Age B / R-I Of Ge Dehradeun

Corrigendum Details

Sr No CorrigendumDate Corrignedum CorrigendumType NewSubmissionDate
1 29-Dec-2022 Bid Auto Extn Corrigendum Bid Auto Extn Corrigendum 05-01-2023

Key Value

Document Fees
INR 500 /-
EMD
INR 93000.0 /-
Tender Value
INR 46.50 Lakhs /-

BOQ Items

Name of Work:SPECIAL REPAIR TO INTERNAL ROADS AT GHUNGHORA GRN UNDER AGE B/R-IOF GE DEHRADEUN.
Sl. No. Item Description
1M&L for repair to pot holes any depth, not exc 1.00 sqm each including sweeping free from dust and mud or water, scoring sunken surfaces in roads, paths etc, cutting around edges to at least 25 mm thick in depth, making good by applying tack coat with paving bitumen (VG-10) @ 5kg per 10 Sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) depth of potholes exc 30 mmcomplete all as specified and directed.
2Scarifying and picking graveled macadam or bituminous macadam surfaces in areaexc.400 sqm and depth exc 50mmbut n exc. 100mm and removel of aggregate complete all as specified and directed.
3M&L for preparing of un surfaced water bound macadam by brushing with wire brushes for removing caked mud etc. and sweeping with mechanical broomers and finally fanning the cleaned surface with air compressorsto removed all loose dirt and applying evenly priming tack coat with bituminous primer @ 10Kg/10 sqm using viscosity grade Bitumen VG-10 complete all as specified and directed.
4M&L for premix bituminous macadam consolidated thickness (75mm or less) thickwith 4% binder content by weight of total mix using viscosity grade Bitumen VG-30 any penetration laid/rolled to required gradient and camber using power road roller complete all as specified and directed. Note:- Preparing surface and priming coat on bituminious macadem shallbe measured and paid seperately.
5M&L for providing bituminous premixsemi dense asphaltic concrete 30 mm consolidated thicknesswith 5.5% binder content by weight of totalmix, using viscosity grade Bitumen VG-30 rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed.
6M&L for preparing of black top surface by brushing with mechanical boomer for removing caked mud etc. and sweeping with mechanical boomer and finally with air compressor to remove all loose dirt etc and finally fanning the cleaned surfaces with gunny bags to removed all loose dirt etc and applying evenly a priming/tack coat with bituminous primer at 5 kg per 10 sqm using viscosity grade Bitumen VG-10 over black top surface complete all as specified and directed.
7M&L for providing bituminous premixsemi dense asphaltic concrete 40 mm consolidated thicknesswith 5.5% binder content by weight of totalmix, using viscosity grade Bitumen VG-30 rolled with 8 to 10 tonne power roller and compacted to required camber and gradient complete all as specified and directed.
8M&L for preparation of road surfaces and applying thermoplastic reflective paint in marking of minimum 2.5mm thick single coat as in centre line and edge line road marking of 150/100 mm width using "HOT MARK" thermoplastic paint (hot application) white/ yellow by indigenous modern propelled road marking machine as directed including all ingredients such as blinder, glass beads Titanium dioxide calcium carbonate inter fillers, thermoplastic requirement for glass beads shall be the table No 800.4 of MORTH specification including spraying of glass beads etc all as per manufacture instructions complete all as specified and directed.
9Supply and fixing cat eye solar reflective type ofmetal body alloy of size 100mm x 100mm x 20mmwith PAMA striplens reflector of model No. DA972.0 fixed with and incl MS stud of suitable size as per manufactures instructions complete all as specified and directed.
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail