Military Engineer Services-MES has published Provision Of Certain Revenue And Minor Works Under Ge ( West ) Mathura. Submission Date for this Tender is 05-01-2023. Civil Work Tenders in mathura Uttar Pradesh. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 19-Dec-2022 | Amdt in BOQ | BOQ | 29-12-2022 |
| 2 | 29-Dec-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 05-01-2023 |
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exc. 1.5m wide and not exc. 1.5m in depth for foundation etc or for shafts, walls, cesspits, manholes pier holes etc not exc. 10sqm on plan and not exc. 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 2 | Returning filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick in soil complete all as specified and directed. |
| 3 | Removing excavated soil n.exc 50 Mtr and depositing where directed at a level n.exc 1.5 Mtr above the starting point complete all as specified and directed. |
| 4 | M&L for Cement concrete (1:4:8) type D-2 using 40mm graded stone aggregate as in foundations, filling and mass concrete complete all as specified and directed. |
| 5 | M&L for applying evenly a coat of blown type bitumen at the rate of 1.50 Kg per square metre and binding with clean dry sand @0.05 cum per sqm over 40mm thick cement concrete (1:2:4) type B0 using 12.5mm graded stone agregate as in damp proof course to horizontal or vertical surfaces including necessary formwork complete all as specified and directed. |
| 6 | M&L for Reinforced cement concrete (nominal mix) (1:1½:3)type A1 using 20mm graded stone aggregate as in foundations, including rafts, footings, foundations beams, plinth beams, bases for columns, etc, basement slabs, under reamed piles and mass concrete complete all as specified and directed. |
| 7 | M&L for Reinforced cement concrete (nominal mix) (1:1½:3)type A1 using 20mm graded stone aggregate as in slabs supported on walls, beams and columns in floors roofs landings canopies deck slab and in snelves and the like complete all as specified and directed. |
| 8 | M&L for Reinforced cement concrete (nominal mix) (1:1½:3)type A1 using 20mm graded stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed. |
| 9 | M&L for Reinforced cement concrete (nominal mix) (1:1½:3)type A1 using 20mm graded stone aggregate as in chajjas etc complete all as specified and directed. |
| 10 | M&L for Reinforced cement concrete (nominal mix) (1:1½:3)type A1 using 20mm graded stone aggregate as in beams, cantilevers, bressumers, lintels over 1.5 m span complete all as specified. |
| 11 | Formwork to sides of concrete foundations footings bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams, and similar work vertical or to batter for to batter for rough finished of flat surface complete all as specified and directed. |
| 12 | Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) for rough finished of flat surface complete all as specified and directed. |
| 13 | Formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and directed. |
| 14 | Formwork to sides of pillers, posts, struts, piers, columns and stanchions of square , rectangular or polygonal for rough finished surface of concrete complete all as specified and directed. |
| 15 | Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams etc. for rough finished surface of concretecomplete all as specified and directed. |
| 16 | M&L forTMT bars 10mm dia and over in reinforcement cut to length bent to shape required including cranking bending, binding hooking ends etc and binding with MS annealed wire not less than 0.9mm dia etc complete all as specified and directed. |
| 17 | M&L for TMT bars 6mm to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. |
| 18 | M&L for TMT MS bars of 6mm dia and upto 8mm dia as in stirrups and spacers cut to lengh bent to shape reqd incl cranking bending spirally for hooking for column and binding with MS annealed wire not less than 0.9mm dia complete all as specified and directed. |
| 19 | M&L for water proofing treatment with APP modified bituminous membrane 3mmthick consisting of the following for RCC roof :- (a) Cleaning palstered roof surfaces and applying a coat of oxidised bitumen based solvented primer @ 0.3Kg /Sqmof approved make on top of dry surface of RCC roof complete all as specified and directed. (b) M&L for APP modified polymeric water proofing membrance 3mm thick weight not less than 3.0 Kg/Sqm with non woven polyster core of approved make applied by heating one surface of membrane with LPG torch with lap of 100mm and the overlap shall be sealed by flame complete all as specified and directed. |
| 20 | M&L for 75 mm thick Cement concrete type D-2, (1:4:8) using 40 mm graded stone aggregate as in sub base complete all as specified and directed. |
| 21 | M&L for 25mm thick PCC (1:2:4) type B-0 using 12.5mm graded stone aggregate ) as in floor finishes and leveling course complete all as specified and directed. |
| 22 | M&L Non skid coloured ceramic tiles 7 to 8 mm thick (Square/rectangular) area of each tile exceeding 0.18 sqm but n.exc 0.38 sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match with and including 15mm thick screed bed in cement mortar (1:6) for laying floor finishes complete all as specified and as directed. |
| 23 | M&L for Coloured Glazed ceramic tiles in vertical surface 450 x 300 x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over andincluding10mm thick plaster in cement mortar (1:4) complete all as specified and as directed. |
| 24 | M&L for brick work with sub class "B" old size brickstraightor curved on plan exc 6m mean radius built in CM (1:6) complete all as specified and directed. |
| 25 | M&L for brick work with fly ash bricks straight or curved on plan exceeding 6 mtr mean radius builtin CM (1:6) complete all as specified and as directed. |
| 26 | M&L for Rendering 15mm thick on other than fair faces of brick work or concrete surfaces in cement mortar (1:6) andfinished surface fair and even complete all as specified and as directed. |
| 27 | M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces in cement mortar (1:4) finished fair and even complete all as specified and directed. |
| 28 | M&L forrendering5mm thick in CM (1:4) onfair finished faces of ceiling surfaces finished even and smooth without using extra cement complete all as specified and directed. |
| 29 | M&L for preparation of new plastered surfaces and applying two coats ofoil bound distemper over a one coat of chalk whitening on walls complete all as specified and directed. |
| 30 | M&L for preparation of new plastered surfaces and applying two coats of cement based paint over one coat of cement primer on wallscomplete all as specified and directed. |
| 31 | M&L for preparartion of new plastered surfaces of ceiling and applying two coats of white wash on ceiling complete all as specified and as directed. |
| 32 | S&F Factory made PVC single door frame of size 50x47mm made out of 5mm plain colour PVC sheetreinforced with MS square tube complete all as per specification and drawing of SSR Part-I and the door frame to be fixed to thewall using MS screw 75mm long with PVC fastener as per manufacturer"s, instruction complete all as specified and directed. |
| 33 | S&F Factory Made Solid PVC Moulded Door Shutters35 mm thick (stile:), with particle board core and 2,4 or 6 raised panel design with 5mm thick Moulded colour PVC Sheet on the front Face & 5mm Plain colour PVC sheet on back face, fixing in frame at site complete specification & drawing as per SSR complete all as specified and directed. |
| 34 | S&F 250 mmaluminium alloy, anodised sliding door bolts with hasp, staple and fixing clips of sheet, cast or extructed section and fixing bolltsand sliding bolts of extruded sectionor cast aluminium ally and fixed complete all as specified and directed. |
| 35 | S&F 150mm Anodised aluminium anodised barrel tower bolt of extrude section and fixed complete all as specified and directed. |
| 36 | S&FAnodised aluminium 150mm handles, cast type complete all as specified and directed. |
| 37 | S&F stainess steel wire cloth 0.36 mm dia of wire and average width of aperture 1.40 mm and fixed complete all as specified and directed. |
| 38 | M&Lfor framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, framework of water tanks and similar work con- forming to Fe.290 Gde-E-165 including portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts including dismantling old structure etc complete all as specified and directed. |
| 39 | S&Ffactory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specified and as directed. |
| 40 | S&Ffactory made steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete without glazing bars, dovetailed or welded complete all as specified and as directed. |
| 41 | S&F figured glass 3mm thick pin head type and glazing with oil putty and securing with glazing pins not exceeding 0.50 Sqm in each pane complete all as specified and directed. |
| 42 | M&L for applying two coats of synthetic enameled paint over a coat of red oxide primer on new steel surfaces exc. 10 cm girth and width including preparation of new steel surfaces complete all as specified and directed. |
| 43 | M&L hard core of guage not exc. 63mm deposited spread and levelled in layers not exc. 15 cm thick, watered and rammed to a true surface using broken bricks complete all as specified and directed. |
| 44 | M&L for 75mm thick cement concrete type C-1, (1:3:6) using 20mm graded stone aggregate as plinth protection and finished surface even and smooth without using extra cement complete all as specified and directed. |
| 45 | S&F bib cock 15mm dia cast copper alloy fancy type with crutch of butterfly handle screwed down for iron pipe complete all as specified and directed. |
| 46 | S&FSGSW gully trap 150 x 150mm square or round mouthed, type P incl jointing to waste pipe fixed in cement concrete type B-1 (1:2:4)complete all as specified & directed. |
| 47 | S&FStainless steel gratings 100mm bore size fixed with white cement, complete all as specified and directed. |
| 48 | S&F chromium plated stop cock cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe with long shank and cup 15mm bore complete all as specified and directed. |
| 49 | S&F chromium plated stop cock cast copper alloy screwed down high pressure with crutch or butterfly handles screwed both ends for iron pipe with long shank and cup (concealed type) 15mm bore complete all as specified and directed. |
| 50 | S&F vitreous china wash basin, white, flat back, size 550 X 400mm including wasteand CI brackets of suitable butexcluding tapes, chain and plug etc, complete all as specified and directed. |
| 51 | S&F Pillar taps cast copper alloy, fancy type with capstan head, CP, screwed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe15 mm bore, supplied andfixedcomplete all as specified and directed. |
| 52 | S&F Bevelled edge mirror of 6 mm thick selected quality glass, 600x450mm size, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers,complete all as specified and directed. |
| 53 | S&FPVC valve less, syphonic action type, flushing cistern 10 ltr capacity, low level, white/coloured, with inlet, wall valve, float and handle, flush pipe including bracket complete all as specified and directed. |
| 54 | S&F vitreous china was down, water closet pan (pedrestal pattern), white including fixing bolts and connection to flush pipe and drain out going pipe and closet seat cover black, closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device complete all as specified and directed. |
| 55 | S&F PVC connection pipe 15mm size with nuts, washers of length 450mm pipe complete all as specified and directed. |
| 56 | S&FGI tubes medium grade, with all fittings and fixed complete to wall and ceiling/floor 15mm bore complete all as specified and directed. |
| 57 | S&FGI tubes medium grade, with all fittings and fixed complete to wall and ceiling/floor 20mm bore complete all as specified and directed. |
| 58 | M&L for cutting chases, pining in making good to facing where required and pointed in CM (1:3) to ends or edges of landing , steps cills, sun shade, shelves etc and cutting chases for concealed conduit wiring etc and making good , match with existing surfaces by applying white/colour wash cutting not exc 10cm girth complete all as specified and directed. |
| 59 | S&F 75mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 60 | S&F 110mm PVC (SWR) pipes single socketed, excluding fittings in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed. |
| 61 | S&F rotational moulded polyethylene water storage tank triple layer (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Pt-Iof 750 Ltr capacity complete all as specified and directed. |
| 62 | S&Fvitreous china urinal, half stall type, white incl 15mm bore push tap any colour of PTMT screwed for iron pipe and fixed complete including providing and fixing plugs with andincluding 60mm long brass screws, pointed around urinal back in cement; fixing dischargepipe, flush pipe, grating and union for discharge, complete all as specified and directed. |
| 63 | M&L for cement concrete (1:3:6) type C-2 as in surface channels and drains (using 40mm graded stone aggregate) complete all as specified and directed. |
| 64 | Extra for forming fair finished drain or channel 45cm inner girth in cement concrete using extra cement, including forms, moulds, mitered/stopped end etc. complete all as specified and directed. |
| 65 | M&L for Keyed pointing in CM (1:3)to brick-tile fecing, with tiles laid flat in stretcher course complete all as specified and as directed. |
| 66 | M&L for cement concrete (1:2:4) type B2 using 20mm graded stone aggregate as in lintels upto 1.5m clear span, cills, steps, seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railigs upto 60cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, sligtly rounded or chamfered angles and throating, as directed including necessary form work complete all as specified and directed. |
| 67 | Surface excavation n.exc 30 cm deep and averaging 15 cm deep getting out soft / loose soil complete all as specified and directed. |
| 68 | M&L for sand filling under floors or in foundation complete all as specified and directed. |
| 69 | M&L for Machine pressed precast conctete interlocking paver block with grey cement & pigment any shape and size conforming to IS 15658-2006 of 60 mm thickness, M-35 Grade complete all as specified and directed. |
| 70 | M&L for concrete bed to drainpipes 150mm dia including packing under and haunching against the sides of pipes after they are laid and tested in cement concrete (1:3:6) type C-2 using 40mm graded stone aggregate complete all as specified and directed. Note :The thickness of concrete bed below the barrel of the pipe shall not be less than 100mm. |
| 71 | M&L for salt glazed stone ware drain pipe 150mm grade "A" laid in trenches and jointed in CM (1:1) complete all as specified and directed. |
| 72 | M&L for construction of septic tanks for 25 users, excavation , in ordinary soil, complete all as specified and as shown in drawings. Note :-HQ CEJZ Drawing No TD/2002/S-2 Sheet 1/1) |
| 73 | M&L for construction of septic tanks for 50 users, excavation , in ordinary soil, complete all as specified and as shown in drawings. Note :-HQ CEJZ Drawing No TD/2002/S-2 Sheet 1/1) |
| 74 | M&L for Construction of soakage wells of size 2.4M dia x 3.0M deep including excavation in any type of soil complete all as specified and shown on drawings. Note :- (i)Effective depth should be measured from inlet of pipe. (ii) HQ CEJZ Drawing No TD/2004/S-35 Sheet 1/1.) |
| 75 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of red colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 76 | S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel ridges suitable for corrugated steel sheet 0.5mm thick of red colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screwscomplete all as specified and directed. |
| 77 | S&F steel work in tubular trusses including columns, special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS.1161-1998 grade St-240 complete all as specified and directed. |
| 78 | Excavating in post holes (or similar holes) each n.exc 0.5 Cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers n.exc 25 cm, watering and removing surplus soil to a distance n.exc 50 m and making good surface in soft/loose soil complete all as specified and directed. |
| 79 | M&L for PCC (1:3:6) type C-2 using 40mm graded stone aggregate as inbed plates of vertical steel posts etc and similar works including necessary form work complete all as specified and directed. |
| 80 | S&F green PVC fibre sheet of 2mm thick fixed with coach screw and washer in roof/ wall complete all as specified and directed. |
| 81 | Dismantling of stone slabs and tiles of any description or thickness in floors, aprons laid, bedded and pointed in any mortar etc complete all as specified and directed. |
| 82 | M&L for 18-20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like including 20mm screed bedding in cement mortar (1:4) and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.. |
| 83 | Dismantling mild steel work of any description and in any positioncomplete all as specified and directed. |
| 84 | S&F framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks andhinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and directed. |
| 85 | S&F mild steel location board arch type shape including necessary cross for FI 40x6mm as required on site of size 5.50mx0.6m made up of stainless steel tubes of 100mmm square SS pipe framing of grade SS-304 grade, with top board at 3 feet above gate pillars with letters, figures of any size any shape (upto 50 nos) including LED tubelight-03 Nos. Sand base of high density prismatic retro reflective type of superior quality on both sides of aluminium composite pannels(ACP), 3mm thick including necessary PCC(1:2:4) type B1 in pillar complete all as specified and directed. |
| 86 | Dismantiling floor, hearth or wall tiling including cement motar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premishescomplete all as specified and directed. |
| 87 | M&L for vitrified paving tiles (any colour) of size 30cm x 30cm x 10mm thick, with gray cement & pigmentset, jointed and pointed in neat cement slurry in floors laid over and including 15mm screed bedding in cement mortar (1:4) complete all as specified and directed. |
| 88 | M&L for cast iron ornamental type arrows wt approx 1.00 Kg complete all as specified and directed. |
| 89 | Taking down cement plaster on brick or stone walls etc. including racking out joints, hacking for key, scrubbing down with water, any description etc. complete all as specified and as directed. |
| 90 | M&L for Preparation of newly plastered surfaces of walls and applying two coat of apex painton wallscomplete all as specified and directed. |
| 91 | M&L forpreparation of old existing surface of walls by cleaning the surface of wall with help of hand held / long hand sander and applying two coats of oil bound distemper by using air less sprey technology with max working pressure of 3300 PSI and capable of operating single sprey gun with a maximum material hose length 30 mtr, the spray gun should be of reputed make as specifed by paint supplier and accessories for applying the emulsion should be able to spray in hard to reached areas and achieve the good wounding and penetration of paint on the surface to achieve exellent application using limited manpower completeall as specified and directed. |
| 92 | S&F vitreous china squatting pan Orrisa pattern size 580mm x 440mm white with integral foot rest with CI ‘P’ or ‘S’ trap and fixing in lime concrete(1 lime, 2 sand and 5 aggregate), 150mm thick all round and finished just below level of rim of pan to receive the floor finishingcomplete all as specified & directed. |
| 93 | M&L for pre-polished chequered tiles (any colour) of size 30cm x 30cm x 25mm thick, with grey cement & pigmentset, jointed and pointed in neat cement slurry in floors laid over and including 20mm screed bedding in cement mortar (1:4) complete all as specified and directed. |
| 94 | M&L for reinforced concrete pipes of 200mm dia, class NP3, laid in trenches and jointed complete with collars all as specified and directed. |
| 95 | S&F aluminium anodised powder coated door frame and shutters powder coated (minimum thickness of powder coating 50 micron), aluminium section including necessary joining cleats, glazing clips, ruber neoprene packing, handles aluminium 150mm - 2 Nos in each door, aluminium tower bolt 150mm - 02 Nos, hinges, one lock fourlever with duplicate key make goderej and aluminium (extruded section) body hydorlic door closer designation No. 3 universal type, anodised aluminum snap beading screws, 5.5mm thick tinted glass complete all as specified and directed as per details given below :- (a)Outer frame section - 100mmx50mmx1.2mm (b)Shutter - 90mmx50mmx1.2mm (c)Top, middle & bottom rail - 100mmx50mmx1.2mm |
| 96 | S&F powder coated aluminium window using 63mmx38mmx1.6mm chowkhats with 48mmx48mmx1.6mm openable section as in shutter including ornamental aluminium grill, 5.5mm thick glass panes of approved make with rubber for fixing glass and including builders hardware such as aluminium handles 100mm-02 Nos, tower bolts 100mm-02Nos, hooks and eye-02 Nos 150mm, butt hinges 100mm 04 Nos etccomplete all as specified and directed. |
| 97 | M&L for GI frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylone sleeves and screws at 450mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15mm each and web of 45 mm suspended from soffit at approx 900mm centre to centre with GI cleat and steel expansion fasterners with and including ceiling section ( not exc 1.2m length) of 0.55 mm thickness having kurled web of 50mm and flange of 26mm each with lips of 10.5mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457mm centre to centre, size of grid 605mm x 605mmincluding providing and fixing designer decorative Gypsum board 4mm thick complete all as specified and directed. |
| 98 | M&Lfor point wiring with PVC insulated, unsheathed 1.5 sqmm FRLSH multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC concealed conduit medium grade not less than 20 mm dia ISI marked ivory colour with and including all conduit fittings and fixing accessories including not less than 1.60mm thick sunken anodised pressed steel terminal boxes/modular boxes suitable for fixing of modular face plates, 3.0 mm thick hylam sheet cover/modular plate cover for mounting switches, sockets, fan regulators etc incuding 1.5 Sqmm FRLSH multistrand copper conductor cable as continuous earth wire complete for the following:- (a) one light/fan/exhaust point controlled by one switch |
| 99 | All as per item No 98.00 (here-in-before) but for one 3 pin socket outlet 5 Amps point controlled by one switch on the same board with other switches. |
| 100 | All as per item No 98.00 (here-in-before) but for one 3 pin socket outlet 5amps point controlled by one push button on independent board. |
| 101 | M&L for point wiring with 2.5 sqmm PVC insulated, unsheathed FRLSH multistrand copper conductor cable 1100 volts grade drawn into and including rigid non metallic PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour with all and including conduit fittings and fixing accessories 1.2mm thick sunken anodised pressed steel terminal boxes with 3.0 mm thick hylam sheet cover for mounting switches, socket etc including 2.5 Sqmm FRLSH multistrand copper conductor cable as continuous earth wire complete for one socket 16 Amp socket outlet controlled by one switch on independent board.complete all as specified and directed. |
| 102 | S&F socket 5 amps 5 pin flush type standard size, 230 volts complete all as specified and directed. |
| 103 | S&Fswitch piano flush button single pole standard size , one way 5 Amp 240 Voltcomplete all as specified and directed. |
| 104 | S&Fswitch piano flush button single pole, one way 15 Amp 240 Voltcomplete all as specified and directed. |
| 105 | S&F socket 5 amps 5 pin flush type , 230 volts complete all as specified and directed. |
| 106 | S&F ceiling rose PVC/polycarbonate three terminal surface bakelite complete all as specifiend and directed |
| 107 | S&F Exhaust fan 300mm sweep, heavy duty, four blade, double ball bearing, 1400 RPM, minimum air delivery dishcarge 1710 CMH suitable for SP 230/250V, 50 Hz AC Supply with protective bird guard with louver shutters including grouting of frame in wall and connecting with and including 3 run 0.5 Sqmm single core, PVC insulated but sheathered FRLSH multistranded copper conductors cable from ceiling rose to exhaust fan complete all as specified and directed. |
| 108 | S&F Angle/ battan holder polycorbonate type body suitable for batten fitting complete all as specified and directed. |
| 109 | S&F surface and wall mounted 20 watt LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver complete all as specified and directed. |
| 110 | S&F 10W integrated LED bulk head luminaire environment friendly, ultra modern, energy saving, surface mounted decorative oval bulk head with LED light, complete all as specified and directed. |
| 111 | S&F MCB SP 240 volts, 6-32 Amps 10KA,"C" Curve complete all as specified and directed. |
| 112 | S&F MCB SPN 240 volts, 6-32 Amps 10KA,"C" Curve complete all as specified and directed. |
| 113 | S&F MCB SPN, 32 Amp 10KA suitable for 240 V, 50 Hz, "B" series complete all as specified and directed. |
| 114 | S&F sheet metal enclosure MCB distribution boardsingle pole & neutral 240 volts 8 way with IP-43 IK-09 protection double door complete with not less than 200 Amp bus bar and neutral link,fixed flush in wall including chases wall for fixing DB complete all as specified and directed. |
| 115 | Supply & laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with ""XLPE"" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 10 Sqmm x 2.0 core size all as specified. Note: Earth work and other connected work shall be measured & paid sperately. |
| 116 | M&L for sand cushioning and covering clean and dry sand to underground electric cable with 8 cm before laying and 10 cm over the cable including ramming complete all as specified and directed. Note :- Punned thickness shall be measured and paid for. |
| 117 | M&L for sub class "B" brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and directed. |
| 118 | Supply and laying galvanised iron pipe 50mm dia light grade including all fittings for protection of UG cable complete all as specified and directed. |
| 119 | M&L for Earthing complete with galvanised steel earth plate electrode 600x600x 6mm thick , directly in the ground vertically to depth not less than 2.25 mtr below the ground level with top edge of earth plate surrounded by 15cm thick layer of chorcoal dust and common salt. connected to galvanised iron earthing wire 4.0mm diaby means of bolts, nuts, check nuts and washers of galvanised iron or steel , GI pipe light grade 40mm bore for protection of earth lead and GI watering pipe 20mm bore light grade with funnel and wire mesh, PCC chamber in cement concrete (1:3:6) type C1, 80mm thick pre cast RCC (1:2:4) type B-1 cover reinforced with hard drawn steel wire fabric 50mm mesh size and 3.0 mm dia of wire each way, earth plate surrounded by alternate layres of packed chorcoal salt packed which shall be not less than 15 cm in all sides of earth plate all as shown in electricale Plate No-3 MES Sch Part-I, complete all as specified and directed. |
| 120 | Supply, installation and testing of hi wall split unit indoor/outdoor complete with cordless remote control unit and with inbuilt air ionizer and plasma filter for better indoor air quality, PM 1.0 filter, inverter compressor, turbo cooling, dew clean technology, triple display, automatic moisture adjusment, fast cooling, streamer discharge, high ambient operartion upto 54 degree celcious with minimum 5 star rating and ISEER-5.2 of capacity 1.5 Toncomplete all as specified and as directed. |
| 121 | M&L for Sub main wiring with 2 runs of 4 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn through and including PVC conduit ISI marked25mm dia(external) with wall thickness not less than 1.8mm with conduit accessories fixed on wall/roof and one run of 4 Sqmmsingle core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cableas earth conductor complete all as specified and directed. Note : Two runs of 4 Sqmm cable, one run of 4 Sqmm earth conductor and one run of PVC conduit of 25mm dia shall be measured and paid as one unit length. |
| 122 | S&F sheet metal enclosures with socket plug top and MCBs single pole and neutral enclosures with 2 pin and earth plug and socket complete with one SPN MCB of 20 Amp rating 240 Volt complete all as specified and directed. |
| 123 | S&F voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 170 Volts to 250 Volts with output voltage stabilzed at 230 Volts with accuracy of (+/-) 2.5% and speed of correction 8 volts per second of capacity 4 KVA with and including connected accessories complete all as specified and directed. |
| 124 | S&F suction lines/discharge lines copper pipes of suitable sizeas necessary at site complete all as specified and directed. |
| 125 | Supply & laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with ""XLPE"" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 50 Sqmm x 3.5 core size all as specified. Note: Earth work and other connected work shall be measured & paid sperately. |
| 126 | S&F earthing complete with galvanised steel pipe electrode, 40mm bore, medium grade, 2.5 metres length, buried directly and preferably vertically in ground with top edge not less than 1.25 metres below ground level connected with glavanised iron 32x6mm earthing strip as erarth lead all as shown in Plate No. 2 to the earthing test point all as specified and indicated including testing on completion complete all as specified and directed. |
| 127 | Supplying, installing, testing and commissioning outdoor type cubical feeder pillar box made out of MS sheet of 3.15mm thickness outer sheet and inner sheet thickness 2.00mmsuitable for 3 phase, 4 wire, 415 volts, 50 Hz from CPRI approvedfor 35 MVA rupturing capacity having aluminium busbar 200 Amp 3 phase 4 wire system, 415 volts, factory made in an approved factory having to seven tank treatment process for powder coating with thickness not less than 60 microns provided with suitable gasket to make it dust/weather and vermin proof suitable for opening both side with locking arragement and general condition confirming to IS: 8623/93 mounted on suitable PCC (1:2:4) type B1 using 20 mm graded stone aggregate foundation comprising of the following:- |
| 128 | Incoming :-MCCB-63 Amp, 4 pole, 415 volts, 50 Hz with ruputuring capacity 16 KA thermal adjustable release , magnatic type-01 Nos. Outgoing:- (i) MCCB-63 Amp, 4 pole, 415 volts, 50 Hz with ruputuring capacity 16 KA thermal adjustable release , magnatic type-01 Nos. (ii) Digital type Voltmeter (0-500V) with selector switch -01 Nos. (iii) Digital type Ammeter (0-600A) with selector switch -01 Nos. (iv) Indicator lamp LED cluster type (set of three)-01 Set. (v) PCC work for grouting of feeder pillar box complete. Note: Inner shell and outer shell as specified in particular specifications of outdoor panel. |
| 129 | S&F desert cooler GI body heaving base water tank of 20 SWG and top body 22 SWG of size 1000x800x 800mm.The base tank have capacity of 60ltrs water fitted with float valve and including three speed copper wound heavy duty electric mortor single phase 240 volt suitable for 5000 CFM with heavy duty submersible water pump complete fitted withindicator three phases selector switch , pump control by seperate 5 ampwith cord flexibles switch with cord flexible 2 mtr long fitted with top plug and duly painted complete all as specified and directed. |
| 130 | M&L for Sub main wiring with 2 runs of 6 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cable drawn through and including PVC conduit ISI marked25mm dia(external) with wall thickness not less than 1.8mm with conduit accessories fixed on wall/roof and one run of 6 Sqmmsingle core PVC insulated but unsheathed multistranded copper conductor FRLSH 1100 volts grade cableas earth conductor complete all as specified and directed. Note : Two runs of 6 Sqmm cable, one run of 6 Sqmm earth conductor and one run of PVC conduit of 25mm dia shall be measured and paid as one unit length. |
| 131 | S&F MCB SPN, 63 Amp 10KA suitable for 240 V, 50 Hz, "C" series complete all as specified and directed. |
| 132 | Supply, installation and testing of hi wall split unit indoor/outdoor complete with cordless remote control unit and with inbuilt air ionizer and plasma filter for better indoor air quality, PM 1.0 filter, inverter compressor, turbo cooling, dew clean technology, triple display, automatic moisture adjusment, fast cooling, streamer discharge, high ambient operartion upto 54 degree celcious with minimum 5 star rating and ISEER-5.2 of capacity 2.0 Toncomplete all as specified and as directed. |
| 133 | S&F building security lightof30Watt energy saving & environmental friendly long life LED steet light made up of pressure die cast aluminium housing with high power LED as lighting source and lens empedded PC cover having IP65 protection and impact resistance of IK07 and electronic driver and all other fixing accessories complete all as specified and directed. |
| 134 | M&L for Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC framewith 40mm thick RCC cover reinforced with 8mm dia deformed barshandle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 3connected to main control board all as specified and testingon completion. Note: (i) Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc. complete all as specified and directed. (ii) The unit rate includes for protection pipe and GI wire 4mm dia from top of earth plate up to 7.5 meter above ground level. |
| 135 | Supply & laying 25mm bore GI steel tubing with screwed and socket joints medium grade galvanised (including short length) with and including all fittings such as sockets, bents, elbows, unions, tees diminishing pieces etc laid in trenches complete all as specified and directed. |
| 136 | S&F Gun metal gate or globe valves with iron wheel head, ISI marked screwed both ends for 25mm dia bore iron pipes and fixed complete all as specified and directed. |
| 137 | M&L for Cutting existing steel tubing and taking upfor tapping/termination of pipe line, screwing existng steel tubing of size 100/150mm dia, complete all as specified and directed. |
| 138 | Supply & laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with ""XLPE"" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 25 Sqmm x 4.0 core size all as specified. Note: Earth work and other connected work shall be measured & paid sperately. |
| 139 | S&F sheet metal enclosure MCB distribution boardsingle pole & neutral 240 volts 4 way with IP-43 IK-09 protection double door complete with not less than 200 Amp bus bar and neutral link,fixed flush in wall including chases wall for fixing DB complete all as specified and directed. |
| 140 | S&F MCB TPN 63 Amp, 415 volt, rupturing capacity 10 KA complete all as specified and directed. |
| 141 | S&F ceiling fans 1400mm sweep white in colour of Aluminium blades (three numbers) and body, double ball bearing, down rod, fan motor, pair of canopy shackle, assembly kit, electronic regulator with minimum air delivery 245 CFM with service value 6.00 BEE, 5 star rated with brushless direct current motor (BLDC) etc suitable for SP 230 to 250 volts, 50 Hz, AC supply complete and writing MES No on fan body all as specified and directed. |
| 142 | S&F42Wof 2"x2" panel lighting environmental friendly, new generation, aesthetically designed, ultra modern recess mounting luminaire with high brightness SMD LEDs as light sources, suitable for armstrong/grid ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
