Military Engineer Services-MES has published Tender For Special Repair To Certain Roads In Southern Sector At Mil Stn Kota. Submission Date for this Tender is 04-01-2023. Road Work Tenders in kota Rajasthan. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 19-Dec-2022 | Amendment1 | BOQ | 28-12-2022 |
| 2 | 28-Dec-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 04-01-2023 |
| Sl. No. | Item Description |
| 1 | Scarifying or picking gravelled, macadam or bituminous macadam surfaces in area not exceeding 400 Sqm and depth exceeding 50 mm but not exceeding 100mm deep etc complete all as specified and directed. |
| 2 | M&L for 100 mm thick WMM, providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in subbase/base course on well prepared subbase and compacting with smooth wheel roller of 80KN to 100KN weight to achieve the desired density etc complete all as specified and directed. |
| 3 | Labour only for 100 mm thick WMM, providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in subbase/base course on well prepared subbase and compacting with smooth wheel roller of 80KN to 100KN weight to achieve the desired density etc complete all as specified and directed. NOTE: Material obtained from scarifying vide Srl item No 01 shall be reused. |
| 4 | M&L for preparing un-surfaced WMM surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with air blown compressor to remove all loose dirt etc & applying evenly a priming tack coat with bituminous primer VG-10 @ 10 Kg per 10 Sqm etc complete all as specified and directed. |
| 5 | M&L for providing bituminous premix asphaltic semi dense concrete 40 mm thick (consolidated thickness) with mechanical paver, mixed at hot mix plant transported to site in tippers, chipping mixed with 5.5% of paving bitumen (VG-30) viscosity grade, rolled to uniform smooth surface with 8 to 12 tonne power roller and compacted to required camber and gradient complete all as specified and directed. NOTE:- (i) Work shall be executed as per job mix formula approved by Accepting Officer. (ii) Bitumen content as per design mix is found to be less than 5.5%, the short of bitumen shall be recovered at the rate of Rs 60/- per Kg and no adjustment shall be made ifthe bitumen content as per design mix found to be more than 5.5% same shall be provided without any extra cost to the Govt. |
| 6 | M&L for premix bituminous macadam mixed laid with mechanical paver and 8 to 12 tonne power roller and compacted to required gradient and camber (Consolidated thickness 75mm or less) with paving bitumen 4% binder (viscosity grade VG-30) contents all as specified and directed. NOTE:- (i) Work shall be executed as per designed mix (job mix formula) approved by GE. (ii) If the bitumen content as per design mix found to be less than 4%, it shall be recovered at the rate of Rs 60/- per Kg for short of bitumen. If bitumen content found to be more than 4% as per design mix same shall be provided without any extra cost to the Govt. |
| 7 | M&L forpreparing black top surfaces of road by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surfaces with gunny bags to remove all loose dirtetc, applying priming/tack coat with bituminous primer (VG-10) viscosity grade @ 5 Kg per 10 Sqm etc including M&L for providing bituminous premix asphaltic semi dense concrete 30 mm thick (consolidated thickness) with mechanical paver, mixed at hot mix plant transported to site in tippers, chipping mixed with 5.5% of paving binder (VG-30) viscosity grade, rolled to uniform smooth surface with 8 to 12 tonne power roller and compacted to required camber and gradient complete all as specified and directed. NOTE:- (i) Work shall be executed as per job mix formula approved by Accepting Officer. (ii) Bitumen content as per design mix is found to be less than 5.5%, the short of bitumen shall be recovered at the rate of Rs 60/- per Kg and no adjustment shall be made ifthe bitumen content as per design mix found to be more than 5.5% same shall be provided without any extra cost to the Govt. |
| 8 | M&L for cleaning and preparing the road surfaces for road marking with reflective thermoplastic white road marking paint conforming to BIS 3262, laid through road marking machine in a layer painting lines, dashes, arrows, letters etc on roads, pavements and the like exceeding 10 cm wide with road marking paint, white or golden yellow of CRYSTALEX, using 5 Kg material per square meter by incorporating the white glass beads for reflectivity in 100 mm width.etc complete all as specified & directed. |
| 9 | S&F in replacement ABS Plastic Stud (Cat Eyes) dynamically designed having height impact strength and fitted with 2 Nos high reflective reflectors on both sides including fixing arrangement as per manufacturer’s instructions and as directed. Make: Cat eyes of DA Dark eyes or equivalent as in /Future vista /Tata VPI/ Gogia Plastic/3M |
| 10 | S&F in replacement solar cat eyes (studs) made of aluminium di-casted body,100% waterproof, both side reflectors, designed according to IP 65 of size 125mm x 125mm x 25mm with shank not less than 60mm length, high efficiency mono crystalline solar panel (2.5 V/0.3 watt), one Ni-Mh or Ni-cd rechargeable battery (1.2 V/1600 MA) having six super bright LEDs with 10000 to 18000 mcd (millicandela) view distance upto 1000 metre and flush road bearing capacity 10 MT, fixing in road by drilling a hole and with epoxy hardener etc as per manufacturer’s instructions at the location etc complete all as specified and directed. Model:- “DHRUV in dark eye or equivalent in TATA BP/Gogia Plastic/Red Safe/Froniter/ Tata VPI as approved by GE. |
| 11 | Schedule of Credit |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
