Military Engineer Services-MES has published Tender For Provision Of Platform For Mi-8 Helicopter At Af Stn Kumbhirgram. Submission Date for this Tender is 26-12-2022. Civilian and Commercial Rotary Wing Aircraft Tenders in kumbhirgram Assam. Bidders can get complete Tender details and download the document.
| Sr No | CorrigendumDate | Corrignedum | CorrigendumType | NewSubmissionDate |
| 1 | 19-Dec-2022 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 26-12-2022 |
| Sl. No. | Item Description |
| 1 | Excavation in trenches not exe 1.5m deep and not exe 1.5 wide for foundation etc and getting out in soft/loose soil compete all as specified as directed. |
| 2 | Returning filling in soft/loose soil incl. spreading levelling watering and well ramming in layer n.exc. 25 cm thick. |
| 3 | Earth filling under floor incl spreading ,levelling and well ramming includuing watering as required n exc . 25 cm thick . ( Note : Surplus soil obtained from item No. 1 here-in-before shall be used after removing vegetations/ foreign materials.) |
| 4 | Material and Labour for cement concrete in foundations ,filling and mass concrete type C2 1:3:6(40 mm gradede aggregrate) as inpost hole complete all as specified and as directed. |
| 5 | Material and Labour for mild steel TMT bar 10mm dia and above cut to length bent to shape required incl. cranking bending and hooking and binding with mild steelwire (annealed) not less than 0.9 mm dia.complete all as specified and as directed |
| 6 | All as per item No 6above but mild steelTMT bar6mm and over upto and including 10 mm dia in stirrups |
| 7 | Material and Labour Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) offoundation and plinth beams;and similar work; ertical or to batter complete all as specified and as directed by Engr-in-Charge. |
| 8 | Material and Labour formwork to side ofpillers , posts , strut , pier , columns and stanchions,rough finished surface of concrete complete all as specified and as directed. |
| 9 | Material and Labour for RCC (1:2:4), Type B2, using 40 mm graded stoneaggregate in foundation , including rafts , footings , foundation beamild steel; plinth beamild steel; basementslabs , undreamed piles and mass concrete complete all as specified and as directed. |
| 10 | Material and Labour forRCC (1:2:4), Type B1,using 20 mm graded stone aggregate in columns , pillars , piers , posts and strutscomplete all as specified and as directed. |
| 11 | Material and Labour for brick work with sub class ‘B’ (modular size bricks) straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed. |
| 12 | Materials and labour for 15 mm thick rendering in cement mortar (1:6) on brick/concrete surface finished even and smooth without using extra cement , complete all as specified and as directed. |
| 13 | Material and Labour 15mm thick screed bed or bedding layers in cement mortar 1:4. |
| 14 | Material and Labour 20 mm thick Granite,any type, table rubbed and polishedin steps,platform and like in cement mortar (1:4) including pointing in white cement with admixture of pigment to match withshade of granite complete all as specified and as directed. |
| 15 | -ditto- same as per item no-14.00 but as in skirting and dado. |
| 16 | Material and labour for chromium plated steel Tubes, ‘medium grade 50 mm bore as in poles, covering the top with suitable ovel covers, welding "U" shaped hooks on both side,complete all as specified and as directed. |
| 17 | Material and Labour for mild steel Base plates channels ,square cut or notched forming holes with revited bolted or welded attachment , Anchor plate , plate washers etc . and similar small articles conforming to Fe 410-W (Gde E-250)complete all as specified and as directed. |
| 18 | Supply and fix Fe-410W(Gde-E-250) quality B joinst channel, angle, or tee sections fixed withoutconnecting plates etc. (cut to ordinary lengths i.e., within 20mm of the length indicated, complete all as specified and as directed. |
| 19 | Supply and fix mild steel screw bolts,(machinemade) with hexagonal or square heads at one end and screwed the other end or screwed both ends , each screwed end to be fixed with washers and one hexagonal or square nutm exc30 cm long complete all as specified and as directed . |
| 20 | Material and Labour for preparing new steel surfacesof any descriptionexc 10 cm in width, priming with red oxide and applied two coat of synthetic enamel paint complete all as specified and as directed. |
| 21 | Material and labour for preparing new steel surfacesof any description, n.exc 10cm in width or girthand applying two coats of synthetic paint over a coat of red oxide primer complete all as specified and as directed. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
