Forest Department-FD has published Tender For Construction Of Custudy Forest Lock Up At Shahapur Range Of Shahapur Forest Division Shahapur. Submission Date for this Tender is 22-12-2022. Civil Work Tenders in shahapur Maharashtra. Bidders can get complete Tender details and download the document.
| Sl. No. | Item Description |
| 1 | Item No.1 Excavation for foundation inearth,soil of all types, sand, gravel and soft murum, including removing the excavated material up to a distance of 50m beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling,ramming, watering including shoring and strutting etc. |
| 2 | Item No.2 Excavation for foundation in hard murum including removing the excavated removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed dewatering, preparing the bed for the foundation and necessary back filling,ramming,watering including shoring and strutting etc. |
| 3 | Item No.3 Providing preconstructional antitermite treatment as per IS 6313 (Part-II) by treatment the bottom surface and sides of excavation at the rate of 5 litres of emulsion concentrate of 1.0 percent of chlorophyrifos per square meter of surface area covering 10 years guarantee on bond paper. |
| 4 | Item No.4 Providing preconstructional antitermite treatment as per I.S 6313(Part-II) by treating the top surface of plinth filling at the rate of 5 litres of emulsion concentrate at 1.0 percent of clorophyrifos per square metre of surface area covering ten years guarantee on bond paper |
| 5 | Item No.5 Providing and laying cast in situ/ready mix cement concrete in M-10 of trap/granite/quartzite/gneiss metal for foundation and bedding including bailing out water, steel centering, formwork,laying/pumping, compacting,roughening them if special finish is to be provided,finishing if required and curing complete, with fully automatic micro processor Based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan Mixer) etc. |
| 6 | Item No.6 Providing and laying in situ/Ready mix cement concrete M-20 of trap/granite/quartzite/gneiss metal for RCC work in foundations like raft,strip foundations, grillage and footings of RCC columns and steel stanchions etc. including bailing out water, steel centering,formwork,layng/pumping cover blocks, compaction and curing roughening the surface if special finish is to be provieded (Excluding reinforcement and structural steel) etc. |
| 7 | Item No.7Providing and laying Cast in Situ/Ready Mix Cement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C Chajja as per detailed design and drawinings including centering, formwork, cover blocks, laying/pumping, compacting and rougheningthe surface if special finish is to be provided and curing complete. (Excluding reinforcement and structural steel) with fully automatic micro processor based PLCwith SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. |
| 8 | Item No.8 Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/granite/quartzite/ gneiss metal for R.C.C beams and lintels as per detailed designsand drawings or as directed including steel centering, formwork, cover blocks,laying/pumping, compactionand roughening the surface if special finish is to be provided and curing etc. |
| 9 | Item No.9 Providing laying Cast in Situ/Ready Mix Cement concrete M-20 of trap/granite/Quartzite/gneiss metal for R.C.C slabs and landings as per detailed designs and drawings, including centering, formwork, cover blocks, laying /pumping , compaction, finishing the formed surface with cement 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to be provided and curing etc. complete. |
| 10 | Item No.10 Providing and laying Cast in situ/Ready mixcement concrete M-20 of trap/granite/quartzite/gneiss metal for R.C.C chajja as per detailed design and drawings including steel centering, fromwork, cover blocks, laying/pumping, compacting and roughening the surface if special finish is to be provided and curing complete (Excluding reinforcement and structural steel ) with fully automatic micro processor based PLC with SCADA enabled reversible drum type mixer/concrete batch mix plant (pan mixer) etc. |
| 11 | Item No.11Providing and laying Cast in situ/Ready Mix cement concrete in M-20 of trap/granite/quartzite/gneiss metal for RCC pardi of required thickness including steel centering,formwork,cover blocks,laying/pumping, compacting, curing, finishing,and roughening them if special finish is to be provided and curing complete.(Excluding reinforcement and structural steel) with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. |
| 12 | Item No.12 Providing and fixing in position TMT-FE-500 bar reinforcement of various diameters for R.C.C pile caps, footings, foundations, slabs,beams columns, canopies, staircase,newels, chajjas, lintels pardis, copings,fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars,binding with wires or tack welding and supporting as required complete. |
| 13 | Item No.13 Providing second class Burnt Brick masonry with conventional /Indian standard type bricks in cement mortar 1:6 in Superstructure including striking joints, raking out joints, watering and scaffolding complete |
| 14 | Item No.14 Providing and laying damp proof course 50 mm thick in M20 cement concrete layer and bitumen/using cement with waterproofing compound curing, formwork etc. |
| 15 | Item No.15 filing in plinth and floors with approved excavated materials material in 15cm to 20cm layers including watering and compaction complete. |
| 16 | Item No. 16Providing soiling using 80mm size trap metal in 15cm layer including filling voids with sand/grit, ramming, watering complete. |
| 17 | Item No.17 Providing second class Burnt Brick masonry with conventional /Indian standard type bricks in cement mortar 1:6 in Superstructure including striking joints, raking out joints, watering and scaffolding complete |
| 18 | Item No.18 Providing internal cement plaster 6 mm thick in a single coat in cement mortar 1:4 without neeru finish to concrete surface in all positions including scaffolding and curing etc. |
| 19 | Item No.19 Providing internal cement plaster 20mm thick in single coats in cement mortar 1:5 without neeru finish, to concrete, brick surface, in all positions including scaffolding and curing etc. |
| 20 | Item No.20 Providing sand faced plaster externally in cement mortar using approved screened sand, in all positions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at1kg per cement bag curing the same for not less than 2 days and keeping the surface of the base coat rought to receive the sand faced treatment 6 to8 mm thick in cement mortar 1: 4 finishing the surface by taking out grains and curing for fourteen days scaffolding etc. |
| 21 | Item No.21 Providing and laying machine polished machine cut Kota stone slabs 25 to 30 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:6 cement mortar including cement float, filling joints with neat cement slurry, curing polishing and cleaning etc. |
| 22 | Item No.22 Providing and laying machine polished machine cut Kota stone slabs 20 to 25 mm thick for treads and risers of steps and staircases, with rounded nosing for the treads on a bed of 1:4 cement mortar including cement float, filling joints with neat cement slurry, curing polishing and cleaning etc. |
| 23 | Item No.23Providing and laying ceramic tiles of having size 30 cm x 30xm and confirming to corresponding I.S. for dado and skirtingin required position with readymadeadhesive mortar of approved quality on plaster of 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing etc. |
| 24 | Item No.24 Providing and laying ceramic tiles of having size 30cm x 30cm and confirming to corresponding IS for dado and skirting in required position with readymade adhesive mortar of approved quality on plaster 1:2 cement mortar including joint filling with white/colour cement slurry cleaning curing etc. |
| 25 | Item No.25 Providing and fixing M40 grade thick vibrated pull cast of similar type concrete frame with chamfer conforming to IS 65241983 having 6 mm dia. Bars 3 Nos. and stirrups @250 mm c/c and fixing in wall with 6 Nos of hold fast of 12mm dia bars 500 mm long including primer and oil painting etc. |
| 26 | Item No.26 providing and fixing country cut teak wood double or single leaf panelled shutters, 35mm thick style top and freze rail 95x35 thick with lock and bottam rail 195x25mm thick and panels without ventilator as per detailed drawing excluding the door frame, stainless steel fixtures and fastening and finishing the wood work with oil painting 3coats complete. |
| 27 | Item No.27 Providing and fixing 30mm thick SOLID PANEL PVC INTERNAL DOOR SHUTTER consisting of rame made out of M.S tubes of 19 gauge thickness and size of 40mm x 20mm for stiles, top,lock and bottom rails M.S. frame shall have a coat of steelprimers of approved make and manufacture. M.S.frame shall be covered with 5mm thick PVC sheet as gap insert for top rail and bottom rail. Paneling of 10mm thick prelam PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with 30mm wide x 5mm thick PVC sheet beading on either side, and joined together with solvent cement adhesive etc. |
| 28 | Item No.28 Providing and fixng mild steel grill work for windows, ventilators etc. 20 Kilogram/square metre asper drawing including fixtures, necessary welding and painting with one coats of anticorrosive paint and two coats of oil painting. |
| 29 | Item No.29 Providing and fixing mild steel grill railing 20 Kilogram/sq.m with teak wood hand rail of size 75mm x30mm and sill of 75mm x25mm and newel posts for staircases, including fabricating, fixtures, erecting, painting the grill work with one coat of anticorrosive paint and two coats of oil painting with approved colour and polishing the sill, hand rail and the newel post with french polish. |
| 30 | Item No.30 Providing and fixing in position (as per 1868/1982) Aluminium sliding window of three tracks with rectangluar pipe 95x38.10x0.90 mm at weight 0.637 Kilogram/Running metre. With window frame bottom track section 92x31.75 x1.30 mm at weight 1.070Kilogram/Running metre. The shutter should be of bearing bottom 40x18x1.25 mm at weight 0.417 Kilogram/Running metre . Inter locking section 40x18x1.10mm at weight 0.469 kilogram/Running metre. and handle and top section 40x18x1.25 mm at weight 0.417 Kilogram/Running metre. As per detailed drawings and as directed by Engineer in charge with all necessary Aluminium sections fixtures and fastenings such as roller bearing in nylon casting and slef locking catch fitted in vertical section of shutter including 5mm thick plain glass and aluminium mosquito net shutter with stainless steel jail with all required serews and nuts etc. |
| 31 | Item No.31 Providing and fixing in position aluminium partly openable and partly fixed window of any size as per detailed drawing and as directed by Engineer in charge with all necessary alluminium sections including necessary alluminium sections including necessary. fixtures and fastening with 5 mm thick float glass etc. |
| 32 | Item No.32 Providing and fixing mild steel grill gate with angle iron frame 65mm x65mm x10mm with iron bars at 150mm C/C and iagonal flats as per the detailed drawing includng hinges, pivot blcok locking arrangement, welding riveting and oil painting of three coats of approved shade Weight of gate 35 kilogram smt. |
| 33 | Item No.33 Providing and fabricating structural steel work in rolled sections like joists, channels, angles. Tees etc. as per detailed design and drawings or as directed including cutting, fabricating, hoisting, erecting, fixingin position making riveted/bolted/welded connections without connecting plotes, braces etc. |
| 34 | Item No.34 Providing and laying in trenches 20mm dia. Medium grade havingembossed as ISI Mark galvanised iron pipes? 1.63 Kilogram/meter necessary fitting remaking good the demolished portion with filling trenches and with primer of anti-corrosive oil paint, 2 coats including removing existing pipe line if necessary and conveying and stacking the same in PWD chowky or as directed etc. |
| 35 | Item No.35 Providing and laying in walls/ceilings/floors 20mm dia. Medium grade having embossed as ISI Mark galvanised iron pipes of 1.63 kilogram/metre/ necessary fitting remaking good the demolished portion with filling trenches and with primer of aniti-corrosive oil paint, 2 coats . |
| 36 | Item No.36 Providing and laying in walls/ceilings/floors 15mm dia. Medium grade having embossed as ISI Mark galvanised iron pipes of 1.25 Kilogram/metre necessary fitting remaking good the demolished portion with filling trenches and with primer of aniti-corrosive oil paint, 2 coats complete. Including necessary scaffolding and removing existing pipeline if necessary and conveying and stacking the same in PWD chowky or as directed. |
| 37 | Item No.37 Providing and fixing 15mm dia. Screw down bib/stop tap of brass including necessary socket union nut complete. |
| 38 | Item No.38 Providing and fixing screw down for 20mm dia. Wheeled stop tap of brass including necessary sockets /union nut. |
| 39 | Item No.39 Providing and fixing HDP container one piece moulded water tank made out of high density polythyler and built corrugated inclusive of delivery up to destination hoisting and fixing of accessories such as inlet outlet overflow pipe inclusive of all tanks capacity between 200 to 1000 lites |
| 40 | Item No.40 Providing and fixing 10cm PVC nahani trap with gratting etc. |
| 41 | Item No.41 Providing and fixing Orissa type white glazed earthenware 575 mm water closet pan including S trap with earthenware foot rests, cast iron soil and vent pipe upto outside face of the wall 1:2:4 brick bat lime concrete bedding withoutflushing tank and its accessories etc. |
| 42 | Item No.42 Providing and fixing white glazed earthenware Wash Hand Basin of 45cm x 30cm size including cold water pillar tap/cold and hot water pillar tap brackets, rubber plugs and brass chain, stop tap and necessary pipe connection including PVC waste pipe and trap up to the outside face of the wall making good the damaged surface, testing etc. |
| 43 | Item No.43Providing and constructing Brick Masonry Inspection Chamber 60cm x 45cm x90cm including 1:4:8 cement concrete foundation 1:2:4 cement concrete channels half round G.S.W pipes, Brick Masonry, plastering from inside and with frame fixed in cement concrete wth RCC Cover medium duty 140 kilogram with frame etc. |
| 44 | Item No.44 Providing and fixing 100mm dia stabiliser pipe/PVC soil vent/waste pipe and with necessary fixtures and fitting such as bends, tees, single junctions, slotted vent, champs etc. |
| 45 | Item No.45 Providing soak pit of size 120cm x 120cm x 120cm including excavating and filling with brick bats. |
| 46 | Item No.46 Providing and fixing 45cm wide mild steel ladder of 40mm x 6mm mild steel flat stringers and steps of 18mm dia. Mild steel bar for water tank including fixing it in (1:2:4)M-15 cement concrete blcok 60cm x 30cm x30cm and painting the ladder. |
| 47 | Item No.47Providing cement based water proofing treatment to terraces (indian water proofing or alike ) with brick bats laid in required slope to drain the water for any span after cleaning the base surface. Applying a coat of cement slurry admixed with approved water proofing compound and laying the brick bats on bottom layer in C.M 1:5 admixed with approved water proofing compound filling up to half depth of brick bats, curing this layer for 3 days, applying cement slurry over this layer joints of brick bats with C.M. 1:3 admixed with approved water proofing compound and finally top finishing with overage 20mm thick layers of same mortar added wth jute fiber at 1 Kilogram per bag including finishing the surface smooth with cement slurry admixed with approved water proofing compound. Marking finished surface with false squares of 300mm x300mm making the junctions at the parapet rounded and tapered top for required height, with drip mould at the junction of plaster and parapet and curing and covering 10 years Guarantee against leakproofness on Court fee stamp paper ofRs 500 |
| 48 | Item No.48 Providing water proof bedding for flooring of bath and WC 25mm thick in C.M. 1:3 including using approved water proofing compound in specified proportikon as per manufactureers specifications for per bag of cement including leveling curingand covering 10 years guarantee . |
| 49 | Item No.49 Providing and fixing PVC Rain water pipes of 110mm outer diameter and having wall thickness of 2.2 to 2.7 mm confirming to IS135921992 including proper rainwater receiving recess with PVC plug, bend, necessary fittings, such as offsets, shoes, including fixing the pipe on wall using approved wooden cleats projecting 25mm to 40mm, from face of wall a fixing withclips of approvedquality and number filling the joint using rubber gasket with solvent cement and properly resting the shoe of pipes on C.C. or masonryblocks, including necessary scaffolding and maintenace for 3 yrs for any leakages or disloocations of poipe. all the PVC fittings and additional 2 peice socket clips shall be got approved from engineer in charge etc. |
| 50 | Item No.50 Providing and applying priming coat on concrete/mansonry/Absestos cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughlycleaning oil, grease, dirt and other foreign matter and sand papering as required etc. |
| 51 | Item No.51 Providing and applying washable oil-bound distemper of approved colour and shade to old and new surfaces in two coats of exterior of approved colour and shade to old and new surfaces in two coats including scaffolding, preparing the surfaces,. |
Copyright © 2024 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
